≡× MENU

• Repair
• Repair
• Interior Design
• About everything
• About plumbing

How to properly wash plastic windows without streaks. How to properly wash plastic windows How to wash double-glazed windows

– the calling card of a good housewife. Cleaning your windows properly, especially if you live in an apartment building on a high floor, is not an easy task, which is why many people decide to do it only twice a year. It is not surprising that during this time a decent layer of dust manages to settle on the glass, and precipitation leaves stains that take up a huge part of the light. You still need to be able to cope with such pollution! “Thermonuclear” store-bought remedies can come to the rescue, but many housewives prefer less toxic folk methods. Let's figure out how to wash windows without streaks at home in order to get an excellent result that will last for a long time.

Basic rules for washing windows

Rain and snow, wind with dust, condensation, tobacco smoke, traces of insects and fingerprints, children's games with paints and felt-tip pens are the main reasons for the contamination of window glass. Ideally, windows should be washed once every three months. Residents of the first floors may need more frequent cleaning, and perfectionists and pedantic cleanliness enthusiasts may repeat washing procedures even more often. Regardless of how often you wash your windows, it is better to follow a number of simple rules:

• When is the best time to wash windows? The ideal time for cleaning is cool, windless and cloudy weather. The fact is that at high temperatures the detergent will dry too quickly, and you will not have time to wipe it off without leaving streaks. The same goes for a windy day. The bright sun will cause glare, which may interfere with the quality of the washing result;
• What's the best way to clean windows? It is better to start washing windows by sorting out the deposits of things, if any. Then you can remove them and put them in the wash. Don't forget about and. The next stage is washing the window sill and window frames. It is better not to use soda and other abrasives for these purposes - you can damage both. A soap solution based on washing powder, dishwashing gel or laundry soap is ideal. To enhance the effect, you can add a few drops of ammonia. Wipe the frames thoroughly with soapy foam, and then wash off the foam with water. You can use a sponge; in the most difficult places you can use the hard part. Most of the dust and dirt from the windows can be removed using the same soapy water and a sponge, and after that, proceed to using the main detergent (store-bought or homemade). If you carefully monitor the cleanliness of your windows, you can immediately use the main product. It is better to start cleaning windows from the inside. When washing plastic windows, pay special attention to seals, drainage holes and metal fittings - you may need a brush for proper cleaning;
  
• what tools will be needed? Container (basin or bucket) for cleaning solution and water. You will also need a sponge, a piece of dry cloth or a microfiber cloth (the main thing is that there are no fibers left on the window from the material). Many people find it convenient to use a special glass cleaner. This is a device with a sponge on one side and a crimp on the other. The handle, as a rule, can be extended, so that all hard-to-reach places can be washed much easier. Of course, detergent is the main thing we need in the fight against stains and dirt. It is best to apply detergent to glass using a spray bottle, but you can use a sponge;
• Which product should I choose, industrial or homemade? The shelves in supermarkets and household chemical stores are literally littered with special products that promise the perfect result in the form of transparent, streak-free glass with minimal effort. Not all products are as effective as advertising promises, but many actually do their job very well. Not so long ago (many remember that time well) there were no special chemicals, so housewives used improvised means to clean glass, and it must be admitted that the windows in the apartments were no less transparent than now. Traditional recipes mean the absence of toxic and allergy-causing substances and good savings, because all the ingredients can be found at home. The result will be no worse than using store-bought products.

With ready-made products, everything is clear: you need to make a choice based on reviews or your own instinct, apply it to the glass, wash it and evaluate the result. The selection of products is huge. Folk recipes are a whole storehouse of knowledge. If you are afraid of unnecessary hassle, we hasten to please you: preparing a window cleaner at home is generally not difficult. As a rule, it is enough to mix several components, and then proceed as with a store-bought product.

Note that if soap is used or a composition that requires rinsing, then the procedure will be as follows: apply the solution, wipe the surface with a sponge, remove all the foam from top to bottom with a screed, rinse the glass with clean water, then you can go through the screed again, and now all that remains is to wipe the glass dry with a rag, paper towels or newspaper .

No. 1. Newsprint

This is one of the oldest and most proven methods, well known to everyone who witnessed the Soviet era. Dishwashing detergent, powder or grated laundry soap must be added to warm water. Using a sponge, thoroughly wipe the frames, glass and handles, paying attention to particularly dirty areas. Now you need to rinse the glass with clean water and a clean rag and start wiping it with crumpled newspaper paper.

The secret of this method is that newsprint absorbs moisture perfectly, and this is what you need when you need to quickly get rid of water and prevent streaks. Moreover, the paper and the special composition of the ink give the glass a characteristic shine. This method was so popular and gave such excellent results that today some housewives use newsprint along with store-bought products to achieve the best results.

Note that newspapers are not the only folk remedy intended for rubbing glass until it shines. For these purposes you can even use nylon tights, which are easily comparable in effectiveness to microfiber.

No. 2. Chalk

This method also involves pre-washing the glass with warm soapy water. Then the windows are washed with a solution of chalk or tooth powder (2 tablespoons per 1 liter of water). When the glass is dry, all that remains is to wipe it with a clean, dry cloth and enjoy the result: transparency and streak-free glass are guaranteed.

No. 3. Vinegar

It is fashionable to cook according to this recipe multifunctional product. Firstly, it will save you from stains, and, secondly, it will repel insects, which, let us remind you, make a significant contribution to the process of glass contamination. To prepare the solution, you need to mix a glass of warm water and 50 ml of vinegar. It is most convenient to apply the product to the glass using a spray bottle and wipe the window dry with a soft cloth or napkin.

No. 4. Detergent + vinegar

Mix 0.5 liters of water, 70 ml of vinegar and a teaspoon of powder or dishwashing detergent. Use the resulting solution to thoroughly rinse the windows, wiping off all dirt; now all that remains is to rinse the surface with water and wipe everything dry.

No. 5. Lemon or citric acid

Not everyone likes the vinegar smell, and if you can include yourself in this group of people, then vinegar can be replaced with citric acid, which has almost the same properties. You need to dissolve 50 ml of lemon juice in a glass of water, and then, using a spray bottle, apply the product to the glass and wipe them with a soft, dry cloth. The apartment will smell pleasantly of citruses.

There are also another variation preparations. It is necessary to fill a liter jar with lemon peel (the volume may be different, it all depends on the amount of peel collected) and fill it with a 9% vinegar solution. Let the solution infuse for 1.5-2 weeks, after which it must be filtered. The resulting liquid can be added to water and used to clean windows and floors. It will perfectly remove dirt and disinfect.

No. 6. Ammonia

Ammonia is excellent copes with nicotine film, removes other contaminants and disinfects. True, its smell is not pleasant, so after washing it is necessary to ventilate the room well. It is better to work in a protective mask so as not to damage the respiratory tract and avoid poisoning.

To prepare a cleaning solution, you need to mix 2 tbsp. spoons of ammonia and 2 glasses of water. Then everything follows the standard procedure: apply to the glass and wipe thoroughly. This solution is excellent for washing and... To convince you of the effectiveness of the product, we remind you that Most store-bought window cleaning compounds are based on ammonia.

If the glass is heavily soiled, the composition can be enhance with vinegar: in a glass of water you need to dissolve 1 tbsp. a spoonful of ammonia and 1 tbsp. a spoonful of vinegar. Some people recommend replacing the latter technical or formic alcohol. The result will please you.

No. 7. Starch

Surprisingly, starch helps cope with very dusty windows and avoid divorces. Many different folk recipes are based on it. The simplest one is to prepare a solution: 1 tbsp. spoon of starch per 1 liter of water. The mixture is applied to the glass, wiped with a sponge and left to dry. Then all that remains is to wipe with a dry cloth, getting rid of any remaining starch.

A variation of this method is to use raw potatoes. It must be cut and rubbed with a glass tuber. When the window dries, we remove the remaining starch with microfiber and enjoy the result without a hint of streaks.

What is the power of starch? The thing is that the glass is only at first glance even and smooth. In fact, it is full of dimples and scratches into which water can easily get in, dry out and leave streaks. Starch is able to weaken hydrogen bonds, preventing the appearance of streaks.

No. 8. Starch + alcohol + vinegar

To prepare this remedy we need 2 glasses of water, 1 tbsp. a spoonful of starch, ¼ cup of technical alcohol and ¼ cup of vinegar. It is better to first dissolve the starch in warm water and then add vinegar and alcohol. It is most convenient to prepare the mixture directly in the bottle, and then, using a special nozzle, spray it onto the glass. It is better to shake the solution before use. After spraying, wipe it with a paper towel or dry cloth.

No. 9. Potassium permangantsovka

Potassium permanganate, popularly known as potassium permanganate, is used in various fields. It is also suitable for washing windows. It is necessary to dissolve a couple of tablespoons of potassium permanganate in water to obtain a light pink solution. Carefully ensure that all the crystals dissolve - they should not fall on the glass.

No. 10. Salt

Regular salt can remove minor stains and give the glass a unique shine. To prepare the product, just dissolve 2 tbsp in a glass of water. spoons of salt and the resulting solution, wash the glass using microfiber.

No. 11. Soda + vinegar

This famous and popular pair in households is also useful for washing windows. She's great copes with children's drawings on windows. In 2 liters of water you need to dissolve ¼ cup of baking soda and 100 ml of vinegar. You can take warm water so that the soda dissolves faster, since it is important that not a single crystal remains. Baking soda particles can scratch the glass. The resulting solution is applied to the contaminated surface and the effects of children's creativity are carefully wiped off with the hard side of the sponge. Then the glass is wiped dry with a paper towel.

No. 12. Onion

Experienced housewives know that onions help a lot remove traces of flies. Use half an onion to rub the contaminated areas until they are completely clean. Next, all that remains is to rinse with water and wipe dry with newspaper, or use any of the methods described above and below to further clean the glass.

No. 13. Tea

Tea infusion also has good properties to cope with dirt. It is necessary to prepare a cup of strong tea infusion and add 3 tbsp to it. spoons of vinegar. It is recommended to apply this mixture to glass using a spray bottle, wipe with a cloth, and then rinse the glass with clean water. At the last stage, you can use the newspapers mentioned above.

Cleaning windows is one of the components of general house cleaning. You can wash them without streaks using available means. It's nice to look through clean glass when dirt and dust don't spoil the view. On average, plastic windows have to be washed once every 3-4 months, with the first thaw in the spring and the last rains in the fall.

Today, a variety of products are sold that will help clean windows without leaving streaks. But if they are not there, it is quite possible to get by with “grandmother’s” methods, the result will be no worse.

Rules for washing windows

To successfully clean your windows, you should:

1. Choose the optimal day. If you wash in sunny or windy weather, the detergent will dry out quickly and leave streaks. Calm, cloudy weather is required.
2. Prepare the necessary tools/ingredients in advance.
3. Clean the frames and wait until dry. Remove unnecessary items from the windowsill.
4. Wash first from the outside, then from the inside.
5. Wipe vertically, then horizontally. This will avoid divorces.
6. Use protective gloves: rubber and cotton.
7. Do not use abrasive powders.
8. When finished, polish and lubricate the fittings with machine oil.

Procedure

By adhering to a certain order, you can clean windows efficiently and correctly without streaks:

1. Wash the window frame. Remove remaining water and foam. Wipe dry.
2. Pour clean water into the container and rinse the glass with a napkin. Use a scraper to drive the dirt down and remove. This will remove the top layer of contamination.
3. Replace dirty water.
4. Wash the surface using the selected method. First outside, then inside.
5. Rinse off with clean water. Wipe with a scraper or newspaper.
6. Wash the blinds and window sill.

Window cleaners

You can wash plastic windows with specialized products and folk recipes.

Regardless of the product chosen, the washing order will be as follows:

1. Wet a cloth, soak it and remove the dirt.
2. Use the chosen cleaning method and rinse.
3. Wipe dry.
4. Polish the surface.

Do not use rough material, use soft rags or napkins. This will avoid scratches.

Traditional methods

Folk recipes constantly compete with professional cleaners. The absence of chemicals does not harm human health. To wash plastic windows, improvised means are used:

• vinegar water;
• ammonia;
• newsprint;
• manganese;

Advice! If you add salt or vinegar to the washing water, the glass will shine.

Vinegar water

You will need 9% vinegar. To avoid divorces, you must:

1. Dissolve 5 tbsp. l. vinegar in 2.5 liters of warm water. Stir thoroughly. Calculate the required amount of solution yourself.
2. Wash the surface of the window with the resulting liquid, removing dirt.
3. Rinse with clean water.

Advice! Lemon juice can replace vinegar. Dilute 50 ml with 300 ml of water, wash the area of ​​contamination.

Ammonia

Ammonia is an ammonia solution that can dissolve grease and dirt. It has a pronounced, unpleasant odor, so the room should be ventilated when cleaning. You can buy it at a pharmacy, it costs about 40 rubles.

It is necessary to dilute 30 mg of ammonia in 2 liters of water and apply it to the glass. This recipe prevents glass from icing in winter.

You can also prepare the following cleaning mixture:

1. Combine 50 ml of ammonia, 50 ml of vinegar, 2 liters of water, 15 mg of starch.
2. Wash with the resulting solution.
3. Rinse windows with clean water.

Chalk

Chalk is an excellent absorbent, so it removes greasy stains from windows. To do this you need:

1. Make a soap solution.
2. Use it to clean windows.
3. Dilute 2 tbsp. l. chalk in a glass of water.
4. Wash with the mixture, wait 10 minutes.
5. Wipe with a soft, dry cloth when the glass is dry.

Advice! Powdered chalk can be replaced with tooth powder.

Soap solution + newsprint

Newspaper quickly absorbs moisture from any surface. Another feature is the shine that appears after cleaning. This is due to the fact that printing ink contains lead. Sequencing:

1. Make a concentrated soap solution.
2. Prepare a container with clean water.
3. Wipe the windows with soapy water, then wash with clean water.
4. Dry with a dry cloth (microfiber).
5. Wipe the glass dry with newspaper paper.

Manganese

It is necessary to dilute several manganese crystals. The water should be light pink. Wash and remove any remaining moisture with newspaper.

Attention! Wait until the substance dissolves completely, otherwise the glass may be scratched.

Tea

Strong tea will help clean glass without streaks:

1. Brew a cup of strong drink and let it cool.
2. Add 3 tbsp. l. vinegar.
3. Wash the windows with the resulting solution.
4. Wash off any remaining dirt and polish with newsprint.

Advice! For convenience, the liquid can be poured into a spray bottle and sprayed.

Professional

Glass cleaning liquid will easily remove dirt, grease and stains.

To wash, you need to apply the product and wipe with a dry, soft cloth. If contamination is abundant, the procedure is repeated.

High-quality glass cleaning solutions:

1. “Mr. Muscle." The composition contains ammonia.
2. "Clean." It has a specific, alcoholic smell.
3. "Help". Removes fat well.
4. "Cif." Inexpensive but effective.
5. "Clean windows" Allows you to clean glass efficiently at a low price.

Glass cleaning tools

Minimum list of equipment needed for washing:

• gloves;
• napkin, rag, sponge;
• basins, buckets.

The speed and quality of the procedure will depend on the availability of additional devices. Common tools that will help you quickly clean windows:

• mop with a long handle;
• scraper (squeegee) for water;
• melamine sponge;
• magnetic brush;
• steam cleaner.

Window mop

The device allows you to adjust the length of the handle and change the angle of inclination. When the required position is reached, it is fixed. The length can reach 2 m.

Directions for use: wash with movements from one side to the other horizontally, gradually moving downwards. For heavy soiling, use a cleaning cloth or chemicals.

Scraper for water

A similar glass cleaning brush is a rubber tie designed to collect liquid. Sizes range from 20 to 60 cm.

How to use:

1. Carry out initial treatment: wash, soak the dirt.
2. Place the device on the top of the glass and slowly lower it to the bottom. Thanks to the rubber component, the scraper fits tightly to the window, moisture and dirt are driven away and removed with a rag.
3. Reapply the squeegee to the upper section of the glass, moving it to the side. Repeat the procedure.
4. Continue until completely clean. After each wipe, wipe the wiper blade.

Attention! Do not move the scraper in a random direction.

It is a plastic made by foaming melamine resin. Excellent for removing dirt, grease and other contaminants. During use, the sponge wears off and decreases in size. No additional cleaning agents are required: the fibers absorb and remove dirt.

Instructions for use: moisten the sponge in water, squeeze out a little, wipe the glass. When soiled, rinse with clean water.

Attention! The melamine sponge is not intended for the body or food.

The sponge consists of two brushes with magnets. One is intended for the inside of the window, the other for the outside. To prevent the external brush from falling, a safety cord is provided. With it you can quickly and conveniently wash glass on both sides, for example, on a balcony.

Using sponge:

1. Wet the glass with cleaning solution.
2. Moisten the cleaning surfaces of the brushes.
3. Attach the safety cord.
4. Apply one brush from the inside, the second (with safety net) from the outside. Due to the magnet, the brushes will be attracted to each other.
5. Wash starting from the area around the frame. Then move to the central area, moving from top to bottom.

This multifunctional unit will help you quickly clean your windows. This device contains a heating element that increases the temperature of the water and turns it into steam. When you press the “starter gun”, a jet of steam comes out, which cleans grease, dirt, stubborn stains, disinfects, and leaves no streaks. No detergent other than water is required. The operating algorithm is as follows:

1. Clean the surface from dust with a dry cloth.
2. Pour water into the steam cleaner.
3. Put on the selected attachment and turn on the device.
4. Using steam, treat the surface and remove excess moisture with a scraper.

The steam generator should not be too large and heavy, otherwise your hands will quickly get tired when cleaning. The most famous manufacturer of steam cleaners is Karcher.

How to clean a plastic window sill

If a plastic window sill has lost its whiteness or become dirty, it is necessary to take measures to clean it from stains. You can wash yellowed plastic using:

1. Cleaning products. The label must confirm compatibility with the plastic material. It is possible to use alcohol-containing glass cleaners.
2. Washing powder for white. To effectively remove yellow stains, you need to dilute the powder with liquid to a mushy state. Cover the window sill with the mixture and rub with the rough side of the sponge. Old stains should be left for a quarter of an hour. Wipe dry.
3. Soap. Make a very thick soap solution, until it becomes mushy. Clean yellowed plastic with the resulting mixture.
4. Tooth powder, chalk. Dilute 2-3 tbsp. l. with a little water. Apply the thick mixture to the windowsill and rub. Wait 15 minutes, remove the residue with a damp cloth.

Advice! Using the methods listed above, you can wash the frames of plastic and PVC windows. Clean carefully, avoiding contact with glass.

The good thing about high-quality plastic windows is that cleaning them is a pleasure! This is especially understood by those who previously dealt with old wooden frames (dry, warped and splintered), which had to be opened or unscrewed in order to get to the inner surfaces of the glass in the package. Washing plastic windows is much more pleasant and faster, but this process has its own nuances.

Plastic windows are usually washed in spring and autumn. It’s nice and quick to do this, but, as in any business, this process has its own nuances

Those who just want to clean up can limit themselves to water and two rags - wash off all the dirt with a wet one, and wipe off the remaining water from the glass with a dry one. If you are striving for a “shine” effect, then when wondering how to quickly and efficiently wash plastic windows at home, start with proper preparation.

Preparatory process

To begin, prepare the necessary equipment:

• buckets of warm water;
• soft rags and sponges;
• detergents.

Nowadays, many convenient and useful devices have been added to the usual set of household cleaning tools, for example, a variety of scrapers, brushes or mops.

Many people prefer to clean glass with special rubber scrapers made similar to car wipers.

Think about what else you might need - a stepladder, a large basin for removing curtains and curtains, a vacuum cleaner, newspapers or old nylon tights (they can be used to rub washed glass).

Owners of blinds with horizontal slats will have to tinker with cleaning them

Having prepared everything you need, you can proceed to active actions:

1. Remove all curtains and curtains and put them in the wash. Collect the dusty blinds, move them to the side or lift them as high as possible and secure them.
2. Clear the window sills of flower pots, vases, candles, etc. standing on them. Take advantage of the opportunity to tidy up your house plants: carefully inspect, clean and prune, plant if necessary, wipe the leaves, wash with cool “rain” from the shower.
3. Remove the mosquito nets and immediately wash them in a large basin or bathtub under strong pressure from the shower head. There is no need to rub the thin mesh so as not to damage it; dust and dirt are easily washed off with water. It is convenient to wipe plastic frames with a soft sponge.

Wash mosquito nets in a bathtub in a vertical position, it is convenient to leave them there to drain water

When you have removed everything unnecessary and provided yourself with convenient access, it’s time to start washing plastic windows and window sills.

Detergents

The choice of window cleaning products is very wide. If you prefer to use household chemicals, then in any store you will find glass cleaning sprays, gels, pastes or special wipes impregnated with a detergent composition and do not require the use of water. Liquid or laundry soap, washing gels and powders, and dishwashing detergents work well to remove dust and dirt from frames, window sills and glass from the outside. They need to be added to the water in small quantities so as not to create excess foam.

Don't use too much detergent - too much suds will add more work to your work.

The most commonly used home remedies to help clean plastic windows without streaks are table vinegar, potato starch, salt, tooth powder or chalk. We will explain how to handle them further.

Sequencing

You need to start properly washing plastic windows from above and from the inside, that is, from cleaner surfaces, and then gradually move on to the main contaminants that accumulate below and outside.

Wash away the dirt

At this stage, the main thing is not to be lazy about changing the water and rinsing the rag well so as not to spread dirt across the surface of the plastic and glass.

It is enough to wipe the glass from the inside with a cloth moistened with clean water.

Start with wet or dry cleaning from the very top - wipe the cornices, collect dust and cobwebs from the ceiling and slopes with a vacuum cleaner. Mix a warm, mild soap solution in a bucket and wipe the inside of the frames and glass without opening the window. Rub the most contaminated areas on the handles and windowsill well with a rag or sponge.

Be careful when washing the outside of windows

Change the water in the bucket to clean water and add the next portion of detergent to it. Open the window sashes and wipe the top, sides, and then the bottom surfaces of each sash frame. Wash the frame itself and the glass outside, soak the dirt on the outer window sill.

To avoid stains from detergents, it is recommended to remove dirt from glass not with soapy water, but with solutions:

• table vinegar - 2 tbsp. l. for 1 liter of warm water;
• crushed chalk or tooth powder - 1-2 tbsp. l. for 1 liter of warm water;
• potato starch - 1 tbsp. l. for 1 liter of warm water;
• table salt – 1-2 tbsp. l. for 1 liter of warm water.

Heavily soiled glass can be washed well with a solution of vinegar, ammonia and starch. To prepare it, take 1 liter of warm water, add 1 tbsp. l. vinegar and ammonia, 1 tsp. potato starch. Pour the resulting mixture into a spray bottle, spray generously over the surface of the glass and collect all softened dirt with a damp cloth.

It is recommended to rub individual dirty spots or black dots from insects on the glass with half of a cut, unpeeled potato or onion.

It is better to wash plastic windows and window sills with gloves to protect the skin of your hands.

Change the water again and, without soap, wash away any remaining dirt from the outer surface of the glass, frame and window sill. To be sure, wipe them again with a clean, well-wrung out cloth. At this point, the “dirty and wet” part of the work can be considered complete; all that remains is to clean the glass to perfect transparency and shine.

Let's shine

It is no secret that after washing glass, traces of dried water and soapy stains from detergents remain on their surface. Good housewives cope with such problems easily. How to wash plastic windows without streaks?

For polishing glass, napkins or rags that do not fray and absorb moisture well are best suited.

To rub the surface of the glass to a mirror shine, take a dry cloth or napkin. Some people prefer to polish things the old fashioned way (but no less efficiently) with crumpled newspaper or old nylon tights. Glass should be polished using intense circular movements from top to bottom.

Suitable weather conditions are considered an important factor for obtaining an ideal result. It is correct to wash plastic windows on a warm day in the absence of bright sun, rain and strong wind. In the hot sun, the remaining water and detergents dry out very quickly, leaving a lot of stains, and wind and rain make the process very difficult and constantly stain already washed surfaces.

Finishing touches

After making it clean and beautiful, take care of the safety and durability of your windows. The opening and closing mechanisms of the sashes are subject to the greatest mechanical loads, and the rubber seals are subject to temperature loads.

Window manufacturers recommend lubricating all metal fittings with machine oil after each wash after complete drying. Rubber gaskets around the perimeter of the frames must be treated with special silicone grease at least once a year.

Manufacturers of plastic windows recommend lubricating all metal fittings with machine oil after each wash after complete drying.

After taking the necessary preventive measures, you can install mosquito nets and close the windows. Wipe the window sill again with a clean, damp cloth, removing any traces of cleaning and processing remaining on it. Return the “cheerful” flowers and home decor items to their place, hang curtains and clean curtains.

Now you can enjoy the smells of freshness and gentle sunlight with a clear conscience until it’s time to wash your plastic windows again.

Video from YouTube on the topic of the article:

Rating: 4.78 (30 votes)

Do you know that:

Fresh lemon is not only suitable for tea: clean dirt from the surface of an acrylic bath by rubbing with half a cut citrus, or quickly wash the microwave by placing a container of water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt can simply be wiped off with a sponge.

There are special traps to combat moths. The sticky layer with which they are covered contains female pheromones that attract males. By sticking to the trap, they are eliminated from the reproduction process, which leads to a decrease in the moth population.

Before removing various stains from clothing, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of ​​the item from the inside out for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

The dishwasher cleans more than just plates and cups. You can load it with plastic toys, glass lamp shades and even dirty vegetables, such as potatoes, but only without using detergents.

The habit of using an automatic washing machine “sparingly” can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60℃ and short rinses allow fungi and bacteria from dirty clothes to remain on internal surfaces and actively multiply.

The easiest way to remove scale and carbon deposits from the soleplate of the iron is with table salt. Pour a thick layer of salt onto the paper, heat the iron to maximum and run the iron over the salt bed several times, applying light pressure.

If your favorite things show the first signs of gestation in the form of untidy pellets, you can get rid of them using a special machine - a shaver. It quickly and effectively shaves off clumps of fabric fibers and returns things to their proper appearance.

Threads made of gold and silver, which were used to embroider clothes in the old days, are called gimp. To obtain them, the metal wire was pulled for a long time with pliers to the required fineness. This is where the expression “to drag out the rigmarole” came from - “to do long, monotonous work” or “to delay the completion of a task.”

Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don’t have to worry about leaks from neighbors above.

Hide

It is believed that plastic windows only need to be washed a couple of times a year. In order not to damage the frames and glass, you need to be careful when choosing cleaning products and know what is better and how to properly wash plastic windows.

In this article we will look at the issue of window cleaning.

The main mistakes when caring for plastic windows

First, you need to familiarize yourself with the main mistakes when caring for PVC windows.

Typically errors are associated with the use of:

Plastic windows cannot be washed with hard sponges, otherwise you will end up with patterned glass instead of smooth.

1. Aggressive cleaning agents. They must be free of abrasives, for example, do not use Pemolux cleaning powder, which can leave scratches on fragile glass and plastic profiles.

Also, do not use gasoline, alcohol or acidic solvents to clean windows. Otherwise, your windows will soon turn yellow.

2. Hard sponges with abrasives to avoid numerous scratches on the plastic window.

3. Sharp objects when scraping dirt from the window - no knives, chisels or screwdrivers, unless you want to get scratches on both the frame and the glass.

Observe precautions when washing plastic windows. There are several of them:

When you wash a window, lean on something “reliable” - a windowsill or your husband

1. Do not lean too far out of the window or protrude onto the outside of the window sill.

2. Ask to hold you for safety when you wash the window from the outside

3. Choose a stable surface as an approach to the window.

There are several effective ways to quickly and correctly wash plastic windows without streaks and stains with your own hands.

The first way to care for a plastic window

Cleaning a plastic window using a special spray, a soft cloth and paper.

This method is useful for those who have small and slightly dirty plastic windows.

To better clean plastic windows, you will need: soft cotton cloth or sponge, window care spray (with spray nozzle), newspaper or paper, bucket or basin (for water), household gloves.

The instructions are as follows:

If the windows are not high, they are washed with a soft cloth

1. Put on gloves and fill any container with some warm water and soak a soft cloth in it (to avoid scratches on the window) or sponge. Squeeze it harder so that water does not drip from the cloth, but the latter is damp.

2. Wipe off dust and dirt from the window frame.

3. Using a zigzag motion, spread the windshield wiper over the entire window. First, wash the plastic windows outside, and then inside the apartment.

4. Take a clean cotton cloth or sponge and proceed directly to washing the plastic window. Wipe in a circular motion.

5. To make the window shine, wipe it with newspaper or paper, i.e. polish it properly.

If you want to know why plastic windows turn yellow and how to avoid it,...

The second way to care for a plastic window

It is better to wash the plastic window using a special solution and a special screed with a sponge on a long handle (25-30 cm). This is much more convenient, especially if your windows are high above the floor.

And you can wash tall windows, or windows from the outside, with a screed and sponge

1. Prepare a cleaning solution. Eat Several options for making a cleaning product:

• per liter of water 1 tbsp. spoon of starch
• 1 cup vinegar per liter of water
• per liter of water 1 tbsp. spoon of ammonia
• per liter of water 50 g of bleach
• for 2 liters 1 tbsp. spoon of ammonia

Or purchase a special non-abrasive window cleaner. For example, "Aos", "Mr. Muscle" or "Ajax". You need to place 7 drops of this product into a bucket of warm water (2 liters).

2. Dip a sponge into the prepared solution. Squeeze well. So that there are no divorces left.

To remove water from the glass, the rubber end of the tie with a sponge is moved along it along or across it - whichever is more convenient.

3. First wash the plastic window frame outside, then inside. Gently wipe all corners and edges of the window from dust and dirt.

4. Change the water to clean, warm water and dip the screed and sponge into it.

5. Pass the sponge and then the tie (rubber edge) along the entire height of the plastic window, i.e. from top to bottom, without touching the bottom - about 2-5 cm. Periodically dip the sponge in water.

Wipe the rubber edges of the screed every time after the next pass on the glass so that there are no streaks on the window.

6. After making sure that the windows are clean, wipe the screed with a dry cloth. Using movements from left to right along the glass, remove water from the lower edges of the window.

7. Wipe hard-to-reach places (edges, corners) and the sill of a plastic window with a clean cloth or paper towels.

Wipe the windows with a cloth made of artificial suede or microfiber. It won't leave any lint behind.

How and with what to clean windows from tape

You can remove pieces of tape from the surface of a plastic window in several ways:

Using tape

Glue a piece of new tape to the marks of the old one.

Then sharply tear off this piece. If you can’t immediately remove the remnants of the old tape, repeat this procedure several times.

Use of oil

Tape marks can be removed with regular sunflower oil.

Both tea and citrus tree oils, as well as mint, sunflower and vegetable oils, are suitable.

1. Drop oil (vegetable or sunflower) onto a sponge and apply it to the part of the window where traces of the tape remain. Leave for 10 minutes: the glue will become saturated with oil and swell.
2. Wipe the window with a clean, soft cloth.

Using rubbing alcohol

Apply a cotton swab soaked in alcohol to the areas covered with tape. But first apply this solution on a small area. Because different types of plastic can react differently to such exposure.

To make the window shine... and not break

Cleaning the glass outside and inside is sometimes not enough. So that it looks like new and works like a charm, do the following:

A little alcohol won't hurt your glass.

1. For durability, wipe them with a solution of 30 g of water, a couple of drops of ammonia, 70 g of glycerin.

2. Rub the glass with a solution (1 teaspoon of copper sulfate per liter of water) so that they have an attractive greenish tint. Or use dry ultramarine to make the window blue.

3. If a small crack appears on the glass, cover it with colorless varnish. She won't bother you for a long time.

4. Treat glass with vinegar to get rid of annoying flies.

5. Do not forget to lubricate the fittings (moving parts of the window) with machine oil twice a year.

Consumer opinions: the best way to wash plastic windows

On the “Everything for the Home” website, user Vera shares: “Soap solution is an excellent tool for easily and quickly washing plastic windows from dust and dirt.”

Many people still wash their windows with regular soapy water.

Indeed, this is the way out. But for more effective cleaning, experts recommend a glass cleaner. Your windows will remain sparkling clean for several months.

On the Sibmama forum, user Lorochka advises: “Under no circumstances scrub stains on them with acetone or another solvent.”

On the same forum, user Lenochka writes that “traces of adhesive tape can be removed using a scraper for glass ceramics.”

This is true, but it is very difficult to clean windows from tape in this way without scratching them.

On the say7 forum, user Svetochka advises what and how best to wash plastic windows from yellow stains: “You need to take a damp sponge and a pinch of baking soda. Rub a little and dry with a paper towel.”

Indeed, soda can help combat the yellowing of plastic windows.

For most people, cleaning windows is a labor-intensive and extremely dangerous task. However, if you know how to wash windows so that there are no streaks left after treatment, you can handle this job quickly and efficiently.

How to wash windows without streaks

1. First, dirt is removed from the surface of the frame. This structural element should be washed first, because... Most of the dirt accumulates on it. In addition, when washing the frame, water gets on the glass, which causes streaks.
2. Stubborn dirt is removed using a soap solution, which is prepared from 3 tbsp. products added to 10 liters of clean water.
3. Then the glass is washed with ordinary water.
4. At the final stage, the surface is thoroughly wiped with a dry cloth.

The appearance of stains on window structures is explained by the following reasons:

1. The influence of wind, sun and other external factors on cleaning products. These factors accelerate the drying of moisture and cleaning compounds, so in order to clean the windows without streaks, the procedure will have to be repeated several times. Experts recommend applying the treatment in cloudy weather when there is no strong wind outside.
2. Remains of cleaning mixtures. In such a situation, a coating remains on the surface, manifested in the form of streaks. To prevent the problem, windows should be washed thoroughly using a clean washcloth and water.
3. Smoke coming from factories.
4. Condensate.
5. Consequences of smoking in an apartment or house.
6. Repair.

The frequency of washing window structures depends on the region. For example, in industrial areas, glass becomes contaminated more often, which is explained by the release of various wastes into the air.

Weather conditions also play a role in this matter, so experts recommend resorting to preventive cleaning using mild compounds at least once every 4 weeks. General cleaning should be done every season.

What you need for washing

Before washing the windows, it is necessary to remove all unnecessary objects and debris from the windowsill. It is advisable to also remove the curtains and wash them, because... dust flying from them can cause glass to become dirty.

You need to prepare the following equipment in advance:

• soft foam sponges;
• 10-15 liters of water;
• large container (bucket or basin);
• pieces of clean cloth;
• screed;
• newspaper sheets;
• cleaning compounds;
• mop with an extended handle.

This method of washing windows was the most popular in the USSR. First, you need to dilute crushed laundry soap, powder or dish soap in water. The prepared composition should be applied to a soft sponge and thoroughly wipe all handles, frames and glass.

Then the glass surfaces should be treated with a clean cloth and water, and then wiped with crumpled newspapers.

The paper used to make periodicals effectively absorbs liquid into its structure. This will prevent streaks from occurring. In addition, the special composition of the ink and the paper surface will additionally polish the glass.

Instead of a sponge, you can use unnecessary nylon tights. The material will not only glide over glass surfaces with ease, but will also absorb dirt into its structure.

Glycerin, potassium permanganate, ammonia

Glycerin is often used not only to clean windows, but also to prevent them from getting dirty. After applying this substance, a protective coating is formed on the surface, preventing the settling of dirt and dust particles. To use this method, you need to dissolve 0.2 liters of glycerin in 100 ml of clean water. Then 3-4 drops of ammonia are added to the mixture. A soft sponge is moistened with the prepared solution and used to clean the windows. After cleaning, the glass is thoroughly rinsed with water.

As an alternative, you can use a folk remedy for cleaning windows without streaks, such as potassium permanganate. You need to add 3-4 drops of the substance to 1000 ml of water. A cloth is soaked in the resulting mixture and all surfaces are wiped with it. Remains of the mixture and dirt from the window glass are removed with a dry cloth or napkins.

Potatoes, starch, corn flour, chalk

Some apartment and house owners use potato fruits to clean windows without streaks. To do this, cut 1 potato into 2 parts, then carefully process the glass with the halves. A layer of substances from the vegetable will remain on the surface of the glass and prevent the appearance of streaks after the main procedure.

You can also wash glass using starch. For this, 1 tbsp. l. The substances need to be dissolved in 1000 ml of slightly heated water and mixed thoroughly. A sponge is moistened in the mixture and used to clean the window from dirt.

Corn flour also helps remove dirt from window structures without streaks. To do this, you need to dissolve 1 tbsp in 1 liter of water. l. product. A clean cloth is soaked in the resulting substance and used to wipe the glass.

In addition, you can make an effective remedy from ordinary chalk. To do this, you need to chop it, add 4 tbsp. l. powdered chalk in 250-300 ml of water. The prepared mixture is applied to a sponge or cloth used to process the glass.

Lemon or citric acid

For this method, you need to fill a 1000 ml jar with lemon peel and fill it with a 9% vinegar solution. The mixture is infused for 2 weeks, after which it is carefully filtered. The prepared solution can be diluted with water and used for washing floors and windows.

Onion, alcohol, vinegar, tea

You can also properly wash plastic windows using an onion. The substances contained in this product effectively remove a wide variety of contaminants. To do this, you need to remove the husk from the onion and cut it into several pieces. Use the bare side of the onion to treat problem areas.

When thinking about how to properly clean window glass, you can use alcohol and vinegar. These substances are suitable for both preventive and intensive use. Moreover, they can remove a wide variety of contaminants.

To clean windows, you need to take vinegar or alcohol, and then dilute the selected substance with clean water in a 1:1 ratio (if the alcohol is pure). The prepared solution is placed in a sprayer, after which the glass is treated with it. After this, the window can be wiped with napkins or a dry cloth.

Tea-based tinctures also do an excellent job of removing various types of stains. You need to prepare a strong tea infusion and add 3 tbsp to it. l. acetic acid. The solution is applied to the surface with a spray bottle, after which the windows are wiped dry with a cloth.

Detergent

To use this method, you need to prepare a mixture of 1 tsp. dish detergent or washing powder in 70 ml of vinegar concentrate and 500 ml of water. Use the resulting substance to rinse the glass, removing all dirt, then rinse the surface with water and wipe with a dry cloth.

These products not only clean glass, but also make it shinier. For cooking you need 2 tbsp. l. dissolve the selected substance in 300 ml of water. However, these funds must be used carefully, because... they can leave micro-scratches on the glass, which can then become clogged with dirt.

Basic rules for washing windows

1. First you need to choose the right time for cleaning. The weather outside should be cloudy, windless and not hot.
2. You need to start processing from the window sill, if there is one. Then you need to remove the curtains. Then you need to wash the frame. Glasses are cleaned last.
3. Before processing, you need to take care of all the necessary tools, including a basin for rinsing sponges and rags. Some people use a special device for cleaning.
4. You need to choose a cleaning product taking into account your budget, type of windows and climatic conditions.

These devices provide the most effective cleaning. Their main advantage is that to wash the outside (street) side of the window, you don’t need to get out.

One brush is fixed on the inner surface of the glass, and the other on the outer surface. Thanks to built-in magnets, the devices move simultaneously, which allows you to wash windows both inside and outside at the same time.

How to clean windows without streaks using a steam cleaner and a vacuum cleaner

Washing glass with a steam cleaner is done using a special nozzle with a narrowed nozzle. This method allows you to quickly and easily remove dirt without leaving streaks. You need to hold the device 30-35 cm from the surface, gradually approaching it.

To clean window structures with a vacuum cleaner, you need a multifunctional device with the appropriate function. A special nozzle is also used for this. The water supply intensity is set to a minimum, and the washing process begins from the top of the window.

Precautionary measures

• Before using cleaning compounds, it is recommended to test them in small areas;
• you should refrain from using abrasive substances and materials;
• To clean external surfaces, it is better to use long mops and magnetic brushes;
• Avoid contact of cleaning products with skin and mucous membranes.

To avoid significant contamination, preventive cleaning should be carried out at least every month. This will prevent a large number of problems.