How to make a pond from tires in the country. We create a decorative pond from an old wheel in our country house How to make a pond from a wheel
If you decide to buy an artificial pond for giving, do not rush to spend money! It will be much cheaper to build a pond in the country from a tractor tire. As you know, the wheels of these machines are large, and, accordingly, the diameter of such a pond will also not be small.
To prevent water from passing through the wheel, you can use PVC film, but it has many disadvantages. It is more reliable to concrete the bottom of our future reservoir. Concrete is not brittle, will not tear and is not afraid of temperature changes.
So, to create an artificial pond in the country with your own hands, you will need:
- 2 shovels (bayonet to dig a hole under the wheel and shovels to remove excess soil);
- building level;
- saw (it is better to take a grinder with a regular circle for metal, but if it is not there, a hacksaw will do);
- gravel sand and stones;
- plants for pond decoration.
How to make a pond from a tire?
We present a step-by-step guide to building a pond in the country:
- The tire needs to be prepared: cleaned of dirt and dust, remove the upper part (cheek) with a grinder or a hacksaw.
- Decide on the place where the reservoir will be placed.
- Determine how much to deepen the foundation. Is it possible to place a pond on the surface of a flat area, on? or dig into the ground for the entire width of the treads.
- Dig a hole according to the shape of the future reservoir, but slightly larger than the diameter. Level the bottom and pour a sand cushion (at least 15 cm). Tamp and lay the tire on the bottom of the pit.
- For sealing, you can choose one of several options: use a covering material for pools - spread along the bottom of the pit and bring the edges 0.5 m beyond the laid tire or concrete the bottom of the tire.
- If you used the first option - in order to evenly distribute the film in the tire, you need to fill in water. To fix the material well, as an option, you can lay stones around the perimeter of the pond.
- Now, before completing the construction of the pond in the country, you can place a fountain in it, for which you need an electric pump or an aquarium turbine with a nozzle. To protect yourself and others from electric shock, the wire should be pulled through the hose and slightly covered with earth.
As an additional decor, you can install backlighting from solar-powered garden lamps. So you can create an artificial pond in the country with your own hands at minimal cost. In addition to an artificial pond, tires can be used to make an excellent barrel for water. For more information on how to do this, read the following article.
In addition, its assembly does not require a lot of materials, some of them do not even have to be bought. To create a pond from a tire, you do not need certain knowledge and skills.
Materials and tools
In order to make a decorative pond in your country house, you will need:
- tire from the wheel of a large car (KAMAZ, MAZ, tractor, etc.);
- ordinary shovel;
- stones of different sizes (for decoration and defining borders);
- fine sand;
- pebbles or gravel, or pebbles collected on the nearest river (to cover the bottom of the pond);
- covering material or thick oilcloth.
Covering material can be purchased at garden stores, or at stores selling pools. It is preferable to oilcloth, as it is much stronger and will last forever.
But if it is not possible to purchase it, you can use a thick oilcloth. Since it is not so strong, it is better to fold it 3-4 times. Be prepared for the fact that next year the bottom will have to be re-layed, because the oilcloth can leak.
Do you want to decorate your garden plot in an original way? Read.
Find out about planting thuja Smaragd and the rules for caring for it.
Step by step instructions for making a tire pond
Armed with everything you need, you can get down to business:
- Step 1. We need to find a suitable place for the future pond. It is not necessary to have a lot of space, the main thing is that the tire fits.
If you want to make a recreation area around the pond, look for a larger area. You can place a bench or swing on the shore of the pond.
The layer of sand should be so thick that the earth does not show through it.
Stones can be of any size. First lay out those that are larger, and then, accordingly, smaller ones. So it will be more harmonious and beautiful.
You can put any number of stones. It can be in one or two layers, to mark the boundaries, or it can be in several layers, making walls.
Lay stones around the pond
- Step 10 Cover the bottom of the pond with pebbles or gravel. You can also collect stones from the nearest river, in this case it is recommended to wash the stones so that the water does not darken ahead of time. The layer of pebbles or gravel does not have to be made thick, the main thing is that the bottom is completely filled and all this beauty is visible through the water, and not the emerging covering material.
Do-it-yourself tire pond is ready. At this stage, the work can be considered completed. But if you want the pond to become even more beautiful, you can decorate it.
How to make drainage with your own hands on the site, read in. Decoration of the pond and the area around it
At the end of the process, decorate the pond with ornamental plants
In addition to putting beautiful pebbles on the bottom of the pond and around it, you can also decorate the area around the pond.
A pond in a summer cottage not only creates beauty and originality, but also helps us and our green friends to endure the heat. Even a tiny body of water made from an old waste tire can create its own unique microclimate around it.
Moreover, such a pond can be placed both on a summer cottage in the garden and on the balcony. All you have to do is choose the right tire size. Next, I will tell you how to make a pond in the country with your own hands from a tire.
Tire selection
Having imagined where the future reservoir will be located, we select a suitable tire. For a balcony, a wheel from a passenger car is quite suitable, and for a country option, larger sizes are suitable, which have the rear wheels of tractors, trucks and dump trucks. Having decided on the size, you can go in search of the desired "container".
Tire preparation
In the tire, the upper part is cut off with a knife or a metal file. You can also use a jigsaw at low speeds.
We make a pond in the country with our own hands
1. We dig a hole that has the size of a prepared tire. You can make it a little smaller if you think about the raised bank of the pond. The bottom needs to be leveled and a sand cushion made. The sand must be free of stones. If possible, you can protect the reservoir from powerful tree roots with a non-woven needle-punched roadway. We put the tire in the prepared recess.
2. We perform waterproofing. To do this, you need to prepare in advance a special durable covering material, which is usually used for waterproofing pools. It is sold in garden stores, as well as pool supply stores. We put it in a tire, and the film should go 50 cm beyond the edge of the future pond.
You can, of course, use ordinary polyethylene. However, in this case, you will have to change it every year, because. Under the influence of ultraviolet, it decomposes and begins to leak. And he won't survive the winter at all. Although, you can lay polyethylene in two layers. But even in this case, there are no guarantees for long-term service.
On the other hand, if changing the film every year for the owners of the site is not difficult, then it is quite possible to get by with it. Moreover, at first it will be a fairly cheap option. In any case, after weighing all the pros and cons, everyone will choose the most suitable option for him.
3. The walls of the pond. The film that covers the bottom is distributed along the bottom and sides. In order for it to lie well, we fill our reservoir with water. We finally straighten the edges of the film and sprinkle them with sand. This will keep it from slipping. On top of the film there will be decorative elements decorating the "shore" of our pond.
4. We cover the edges with stones. When a huge Belaz tire is used, it can be equipped for swimming. In this case, the pebbles for the shore should be chosen small so that it is pleasant to step on them. Otherwise, they will roll down and interfere with swimming. Rounded stones will protect your legs from abrasions and scratches.
When the reservoir is used exclusively for decorative purposes, stones can be chosen more expressive in shape. First, large ones are laid out, creating the basis of the composition from them. Further, the picture is complemented by medium-sized stones. The finishing touches will be small gravel or pebbles, against which large “soloists” will look great. The bottom is covered with gravel or pebbles. Suitable plants can be planted.
5. A small fountain will be the finishing touch, which will require a pump immersed in the pond.
As you can see, building a pond in the country with your own hands is quite simple. And anyone who wants to can do it.
And when everything is ready, you can congratulate yourself on a job well done and contemplate with satisfaction the pond sparkling in the sun and enjoy the quiet murmur of water.
Pond in the country. Video
The idea to build an artificial reservoir in the country comes to the mind of many land owners. Undoubtedly, such a source of coolness and positive emotions will please not only the owner himself, but also his guests, becoming a real highlight of the landscape. The mere sight of the water surface helps a person to relax, tune in to a lyrical mood, causes bursts of inspiration. But, having critically assessed only six acres of their own land, some give up their dream. But in vain! We will tell you about how to bring it to life by making a mini-pond from a tire with your own hands in the country, and at the same time recycle old rubber that is unnecessary on the farm.
A decorative mini-pond should please and attract everyone's attention. Therefore, the place where it should be located should be chosen very carefully. There are several rules that we recommend that you follow so that the choice is successful:
- The pond should not be constantly in the sun. Penumbra is the best place for him. Otherwise, the plants will be too hot, and they will begin to wither, and the water will bloom quickly.
- Open and ventilated places are also not the best option.
- If you build a pond under the crowns of trees, the water will constantly become clogged with leaves and small debris. The cleaning process will become regular and tiresome for you.
It is good if the pond is clearly visible from different viewpoints. Let beautiful objects be reflected in it: running clouds, a house or trees. Know that small bodies of water look best when viewed from above. Therefore, they are often placed in natural landscape depressions.
In such a place, the mini-pond will be clearly visible from different viewpoints. In addition, it will not be under constant exposure to direct sunlight.
If you doubt your own choice, arrange a test for yourself. Take a piece of polyethylene that will represent a mini-pond and place it in the place of your choice. Walk around the site and see how well it can be seen from the main viewpoints.
Where can I find the right tire?
Before looking for a tire, let's decide what exactly we want to find. If there is a catastrophic lack of space on the site, then to make our dream come true, it will be enough for us to find a tire from any car.
To implement a large-scale project, the size of the wheel must be impressive. After all, there are wheels whose diameter exceeds human height. Using them as a base, you can build a whole lake!
Tires come in different sizes. It is not so difficult to find such a Gulliver among them, and it is hardly necessary if the size of the plot does not exceed the standard six acres.
For large objects, you must have:
- tire from KAMAZ;
- rear wheel from the tractor "Belarus";
- tires from the mighty BELAZ.
If your own unnecessary tire is not lying around in your garage, then a suitable copy can be found in a tire shop. There often accumulates unnecessary rubber to be disposed of, so you will get it for free.
Used tires can also be found at car dealerships. It is possible that you will have to pay there, but purely symbolically. Ordinary car owners can also offer what you are looking for. So check out their ads as well.
What will your reservoir be like?
In a tiny reservoir, it is unlikely that you will be able to get fish. Although goldfish from an aquarium can feel good in a small artificial pond. However, this building can be decorated in other ways. For example, Siberian iris can be planted along its banks.
Perfect companions for any pond
- water lilies;
- swamp turkey;
- floating pond.
In the end, you can also use artificial decorations that imitate the same lilies, but do not require attention. Small imitations of ducks can look good on its surface, and turtles along the banks.
Plants planted around an artificial reservoir can completely transform it, turning it into a favorite vacation spot for all family members.
The rubber base should be securely covered with decorative flagstone so that it would never occur to anyone how a mini-pond formed on your site. Often, small alpine slides become companions of water structures, which, by the way, solve the problem of creating a shadow.
To provide additional effect, you can highlight the structure with solar-powered garden lights. All the energy that they accumulate on a sunny day, they will use up at night in the form of a soft, mysterious glow.
Pond decorations also have their downside - they attract the attention of kids who love to play in such a fabulous place.
Whatever your mini-pond, you should remember that for small children left unattended, it can become a source of danger.
Step by step instruction
Any work is preceded by a preparatory stage. It is necessary to bring together all the necessary tools and material in order to be distracted as little as possible in the process of performing work.
Stage # 1 - preparing the tool and materials
We don't need a lot of tools.
- two types of shovels: bayonet and shovel;
- building level;
- electric jigsaw or ordinary hacksaw.
In addition to the tire, with the diameter of which we have already decided, we will need:
- PVC film or special covering material for pools, which is sold in specialized stores;
- sand;
- gravel;
- large stones for decorating the banks of the pond;
- plants for decorating a pond and framing.
If everything you need is prepared, you can get to work.
Stage # 2 - preparing the tire for work
Despite the fact that we are going to bury the tire, at the first stage of work it must be cleaned of dirt. But her training doesn't end there. We need to cut off its upper part.
It is unlikely that an ordinary knife is suitable for this purpose. We recommend using a low speed jigsaw. You can also use a hacksaw for metal, but then this operation will have to spend more time and effort.
Stage # 3 - digging a recess for a reservoir
Before you make a recess, you need to level the site. Now we need to decide how much we want to deepen the rubber base of the future structure.
She may be:
- immersed in the soil for the entire width of its tread;
- deepened by one third;
- remain on the surface of the prepared site.
Based on the decision made, we dig a hole. Its shape should correspond to the outer diameter of the tire, but with small allowances around its entire circumference. You should not completely deepen the rubber base into the pit: if you leave the rubber edge on the surface, rainwater will not flood the container.
Before installing the tire in the resulting recess, it is necessary to level the bottom and fill it with sand by about 15 cm. The sand should be soft and without pebbles. In this case, he will be able to protect the gasket placed on the bottom of the reservoir from damage, and water leaks can be avoided.
When forming a recess for a tire, you need to compact the sand well at the site of the future bottom of the mini-pond and check the level of the quality of the work performed
We check the quality of the work performed. Do not forget to tamp the bottom and only after that place the rubber base on it. After that, you should use the level again to check the horizontal position of the tire.
Stage # 4 - waterproofing device
For the arrangement of waterproofing, it is better to use a dense covering material, which is specially designed to protect the bottom of the pools. You can buy it in specialized stores for pools. Sometimes it can be found among the goods for the garden. The material must be taken in such a way that it protrudes from the tire walls by about half a meter.
Yes, we prefer a special waterproofing material over conventional polyethylene. Someone may argue that because of this, our structure becomes less like a homemade product, for the creation of which, as a rule, improvised materials are used. But it is better to make a design that will serve you for more than one year without replacing the bottom. After all, even very thick polyethylene will not be able to withstand the load and will definitely leak.
However, each owner decides for himself which material is better for him to use. When choosing ordinary polyethylene, consider replacing it when you begin to strengthen the walls of the future pond. The building may need to be demolished.
Even if you fold the plastic film in half, it will leak. To replace it, the mini-pond will have to be dismantled, so the top of the structure will have to be made collapsible
So, the covering material is freely distributed along the bottom of the pit, and its edges are brought out half a meter beyond the edges of the tire placed in the recess.
The membrane of the material must be rationally distributed inside the tire. For this purpose, the future country mini-pond is filled with water, which will put pressure on the bottom and walls of the structure. Under its pressure, the reservoir will take its shape.
Take the time for quality work and you will get an excellent result that you can be proud of for several years
Now the covering material must be carefully straightened. To fix the coating in the desired position, you can press it down with rounded boulders laid on the bottom from opposite sides.
Stage # 5 - form the walls and decorate the pond
We smooth the edges of the material and sprinkle them with sand and gravel. This will permanently fix the membrane. Now she won't slip. Sand will serve as the basis for further decoration of the pond.
Further strengthening and decoration of the reservoir completely depends on the imagination of its author. At the initial stage, you can simply overlay the pond with stones.
If you manage to find a large tire, you can make a mini-pond not only for kids, but also for adult family members.
Options for placing stones depend on the degree of functionality of the structure:
- For swimming. If the tire was large, then such a structure can even be used for swimming. The banks of such a pond should not be overloaded with stones. With their help, it is enough to form a platform around the walls. A large number of stones can lead to injury to bathers.
- For decorative purposes. If the reservoir is needed only to create a beautiful image, you can fantasize with the location of the stones in order to emphasize their beauty as advantageously as possible. In this case, do not be afraid to show their sharp edges. They look spectacular.
Stones can be laid out in several rows, placing rounded and large boulders below, and smaller pebbles on top. Even the bottom of a mini-pond can be decorated with cute, medium-sized oval-shaped pebbles taken from a river or brought from the sea. But it is better not to use sand and gravel to decorate the bottom, because the water from them can become cloudy.
Do not overload the mini-pond with decorative elements. He is so handsome. Even in a minimalist style, it remains a magnificent place that attracts the eye.
In any garden, regardless of the will of its owners, many small animals live. It can be, for example, moles, hedgehogs or mice. If you do not want to find the corpse of an unfortunate hedgehog in the water one morning, place a picturesque snag in the pond. It will not only make the appearance of the structure natural, but also help the animal avoid death.
To visualize the whole process of work, watch the video:
Other ideas for arranging such a pond
If you think that a pond from a single tire is all that the fantasy of domestic craftsmen gardeners could give rise to, then you are deeply mistaken. There are a lot of options for using tires to create reservoirs. And we will tell you about the most popular of them now.
If you take not one, but two tires of equal or even different sizes, you can make not one, but two reservoirs that will be in contact with each other with treads. The most interesting thing in this building will be its decorative design. For example, at the junction of two rubber bases, you can build a beam bridge from birch logs. It can be both decorative and a continuation of the garden path.
By changing the degree of penetration of tires, you can create ponds with overflow. To do this, one tire is fixed on the surface of the site, and the other is buried. With the help of such an overflow, by the way, it is possible to organize the drainage of rainwater flowing from the roof.
On the basis of ponds with overflow, you can make a homemade waterfall. To do this, you need to lead a hose to the upper tank, from which water is supplied under low pressure. It can be carefully camouflaged with stones located along the banks. Water, overflowing the upper part of the structure, will effectively run into its lower half, imitating a waterfall.
If the landscape of your site allows, then why not build such a magnificent waterfall, which is based on the same tires
The swimming pool in summer is something that cannot leave any child indifferent. A large tire will make it easy and simple to make it. Kids will have something to splash around in under the supervision of adults. It is best to surround a children's paddling pool with a coastal zone of tiles so that you can safely step on it with bare feet. To protect the children, the water in such a pool must be filtered. A pump can be used for this purpose. Or you can just change the water more often.
A good idea to enliven a pond is to use a fountain in it. To do this, you can adapt a turbine with a nozzle for an aquarium or a small pump. For the fountain to work, it needs to provide power. Do not forget to protect yourself: the electrical wire must be insulated with a corrugated pipe and buried.
See what the construction of a tire fountain looks like:
Even if there is no meth for a pond in the garden, using a tire, it can be done on a balcony, on a terrace or in a loggia. Artificial stones will help to give the structure an attractive look, which can be glued with a water-based composition to the side surface of the tire.
Of course, this list of ideas cannot be exhausted, because human imagination knows no bounds. Watch this video - we're not fooling you:
The desire to make your plot perfect is common to all landowners. Any summer resident can make a pond with his own hands from a tire, spending a minimum of time and money on this process. This structure is being built without the involvement of heavy construction equipment and hired workers. You can make an artificial reservoir from an old tire alone, since the assistant will simply have nothing to do. In order to build a pond in the country, you need very little free space. But a small lake will be a real highlight in any landscape.
Thoughts about the need to equip a small reservoir in the courtyard of private estates come to mind for most of their owners. A modern dacha is, first of all, a territory of rest and relaxation.
A small pond is simply necessary in order to complement the harmonious picture of paths, flower beds, garden arches and ornamental shrubs.
A pond in the country can be made of reinforced concrete, boards, or use a ready-made container made of polyvinyl chloride. But all these options involve serious financial and time costs. In addition, these structures are stationary, which requires considerable effort for their maintenance. Old tires cost nothing and are easy to work with.
Using a tire to make a pond provides the following benefits:
- 1 Availability of material. Old tires can be found on the side of the road, in landfills and on the territory of transport companies. You can bring a large tire on a rented tow truck equipped with a manipulator.
- 2 Ease of processing. The material is easy to saw, cut and drill. For work, simple household tools will be quite enough.
- 3 Durability. Tires are resistant to external factors such as high and low temperatures, humidity and solar radiation. Rodents avoid contact with wheels.
- 4 Structural strength. Tires have strong walls that do not collapse from impacts and strong pressure. When buried in the ground, they can be deformed without collapsing.
- 5 Mobility. If necessary, tires can be quickly dried and moved to a new location. For this, the efforts of one person are enough.
The wheels are made of environmentally friendly material that does not harm human and animal health.
Design features of country ponds
To create an artificial reservoir, it is necessary to use the wheels of the largest possible size. This will significantly expand its functionality.
When planning to make a pond with your own hands, you need to consider the following questions:
- The location of the object. Tire ponds should be located away from the road. If there are trees in the yard, then it is advisable that the pond be periodically in the shade from their crowns.
- Lake type. It can be external or recessed. With an external location, you will have to think through the issues of finishing the sides. In order to bury a wheel, you will need to work hard digging a hole for it.
- Water supply. If the reservoir is installed for a long time, it makes sense to bring polypropylene pipes to it, burying them in the ground.
- drainage system. Provision should be made for the collection and disposal of water that will be poured out of the reservoir. Otherwise, the soil around the pool will turn into mud.
- Interior and exterior decoration. Outside, the pond can be decorated with decorative stone, laid out with paths and planted with plants. Algae, fish and waterfowl will look good inside the container.
- Lighting. Illumination for a pond is necessary in terms of aesthetics and safety, so that a person does not fall into the water in complete darkness.
In addition, you need to consider protecting the reservoir from precipitation. A good solution would be to arrange a light canopy made of polycarbonate in the shape of an arch.
List of tools and materials
It is advisable to carry out work on the arrangement of a country pond in the warm season in clear weather. As a rule, the creation of an artificial reservoir takes no more than two days.
This will require the following property:
- bayonet shovel;
- oil level;
- roulette;
- sand;
- river pebbles;
- fertile soil;
- polyvinyl chloride canvas;
- scissors;
- material for decorating the wheel (stones, paving slabs, flowers).
Before starting the installation of the tire, you need to prepare for work. To begin with, the product is thoroughly washed from dirt with a brush and soapy water. After that, all metal fragments that are stuck in it during operation must be removed from the rubber. The edges of the tire are cut and aligned. To make the resulting cut smooth, it is pasted over with soft rubber.
Measurements of the received workpiece are carried out. The parameters of the pattern from which the waterproofing layer will be created are calculated. A piece of polyvinyl chloride fabric is purchased. This material is highly durable and long lasting. Estimated period of its operation is at least 20 years.
Installation
Before you start digging a pit, it is necessary to mark the ground. The pit should be 20-25 cm larger than the tire in diameter. This cavity will be needed in order to lay and fix the edges of the PVC sheet in it. Do not dig the tire too deep into the ground. Its edges should be raised by at least 15-20 cm. This technique will prevent flooding of the reservoir with storm flows and debris from the ground surface. The marking of the pit is carried out taking into account these nuances.
Further work is carried out in the following sequence:
- A pit is being dug. Its bottom is leveled and rammed. A special fabric is laid at the bottom of the pit, which will prevent soil from washing out from under the pond bowl.
- A pillow for a pond is being created. For this, crushed stone and sand are used. The pillow is spilled with water and leveled.
- The tire is lowered into the pit. It is centered and aligned horizontally. Granite screenings or sand are poured inside the wheel. The layer must be thick enough to cover the protruding parts of the wheel.
- A PVC sheet is laid inside the container. It is evenly distributed over the entire volume of the wheel. The edges of the fabric are laid in the opening between the pit and the tire. The canvas is pressed down with stones.
- The pond bowl is being filled with water. It must be filled completely. Under water pressure, the walls of the wheel expand, the film is tightly pressed against the inner walls of the bowl.
- The edges of the PVC fabric are pressed tightly against the ground. A hole is made in it for a drainage pipe. It is being fixed. Drainage of overflow water will keep the soil around the pool dry.
- The opening between the tire and the walls of the pit is covered with sand. The sand is spilled, rammed and filled up again. This technique allows you to securely fix the pond in the pit.
- The pond is being equipped with water supply and drainage systems. To do this, trenches are dug into which pipes are laid. To collect overflowing water, you can use a plastic container buried in the ground near the pond.
After the main construction work is completed, the design of an artificial reservoir begins.
Design decoration
There are no restrictions on the options for decorating a tire pond. Rubber is securely hidden under a PVC film, which is biologically and chemically inert. Aquatic flora and fauna feel great in the PVC bowl. Based on this, you can show all your imagination when decorating a homemade pond.
It is advisable to cover the bottom of the pond with a thick layer of sand and lay out natural stone. Some products can be cast independently from concrete. They will be a good shelter for the fish that will inhabit the pond. In addition, in artificial caves, aquatic inhabitants will be able to hide from birds of prey, which may want to profit from easy prey.
Plants and algae are best planted in heavy porcelain containers. To do this, you can use old mugs or flower pots. So the root system of plants will be fixed much more reliably than in the sand. In addition, it is much more convenient to remove flowers from the pond in a container when it comes time to drain or clean the pool bowl.
To make the artificial lake look aesthetically pleasing, it is imperative to close the edges of the tire. The easiest option is to lay out a stone around the perimeter. The gaps between the stones are covered with earth, in which flowers and ornamental shrubs are planted. If there is no desire to distinguish a reservoir against the background of the surrounding area, then its edges are closed with a lawn with preliminary soil filling.
The garden pond is an excellent place for recreation in all its manifestations. In order to ensure maximum comfort, measures should be taken to ennoble the area around the reservoir.
You can do this in the following ways:
- fill the soil with a thick layer of sand or granite screenings;
- lay paving slabs of a monolithic or perforated type around the pond;
- make a coating from an engineering board (decking).
Maintenance of the reservoir should also be considered. The walls and bottom of the bowl are cleaned with a water vacuum cleaner. Water is disinfected with special reagents that prevent water from fading in hot weather. It is not necessary to dismantle a pond from tires for the winter. It is enough to drain the water from it, remove the sand from the bottom and cover with a dense material. PVC perfectly tolerates any frost.
