Floor lamps with their own hands. How to make a do-it-yourself floor lamp from improvised materials. Original design developments
Lighting is an important functional and stylistic part of any thoughtful interior. It is the lamps that will help you completely transform any room. Central ceiling lighting has long sunk into oblivion. Today, sconces, floor lamps, night lamps, spotlights on the ceiling and individual lighting allow you to zone the space and create comfort.
Of all the variety of lighting fixtures, floor lamps can no doubt be called the most “homely” and cozy. Soft light, gently pouring from under the lampshade, relaxes and soothes, brings peace and peace of mind to life.
Experiencing a rebirth after some oblivion, floor lamps are happy to settle in every home to give peace to their owners.
The undeniable advantages of floor lamps
A floor lamp is a floor lamp on an adjustable (sometimes flexible) or fixed rod, resting on a stable base. The light bulb is usually covered with a lampshade made of a variety of materials, but there may be options without it.
Unlike other light sources, a floor lamp has the following advantages:
- it refers to mobile structures, the placement of which in a room does not imply preliminary work, for example, fixing the structure to the wall, laying new wiring. To install and operate a floor lamp, it is enough to move it to the part of the room necessary for lighting. The main requirement is the availability of a source of electricity;
- using it, you can easily zone the room. In this case, it is better to install it in a recreation area;
- floor lamps, due to their design, allow you to illuminate only a certain place, which indicates the possibility of creating a stream of directional light and, in turn, save electricity;
- floor lamps are compatible with any style of interior and in absolutely any room.
Modern floor lamps have surprisingly beautiful shapes, are made in a certain style and are able to decorate a room, bring comfort and coziness into it, and radically change the visual perception of space.
How to make a floor lamp?
Of course, designer floor lamps presented in showrooms are distinguished by originality, practicality and elegance, but, as a rule, these moments are somewhat repulsive to many. A floor lamp is associated with warmth, comfort, spiritual harmony, so today more and more people buy handmade products, in which a piece of kindness is invested, rather than mass-produced products.
To make a floor lamp that fits perfectly into your interior, will meet all your requirements, and you can warm and delight your heart on your own. This will require a minimum of electronics knowledge, a minimum set of tools and a desire to create a unique floor lamp with your own hands.
Principles of manufacturing light hand-made
Floor lamps carry, first of all, a practical function. Their role is to create the necessary lighting, which will give the room the necessary color, atmosphere, mood. It can be a bright light, and a mysterious twilight, and a bright spot of light. The only thing that should not be is stealing light when using rough and opaque decor elements.
In order for a lamp created by yourself to please you for many years, you should think about safety standards. To avoid a short electrical circuit, all joints are insulated and hidden behind decorative elements.
It is also necessary to refuse or take as seriously as possible the creation of lighting equipment for bathrooms, toilets and other rooms with a high degree of humidity. In this case, additional moisture insulation is required, which is quite difficult to achieve at home.
Important! When choosing a material for forming a lampshade, it must be taken into account that fabric, paper or other materials for creating a lampshade should not hide the light.
Using various technologies, combining them at your own discretion, you can create an original item that will bring a "zest" to your interior.
Master class on creating a floor lamp from improvised materials
When ordinary lampshades get bored, and you want something original and exclusive, you just need to dream up and give yourself some time to implement the idea. Everything that can be useful for a floor lamp (fall under the arm) will be used, for example: the frame of an old (possibly broken) lampshade, a rope, a bunch of branches. So let's get started:
The first step is preparing the foundation. For the manufacture of a floor lamp, it is necessary to choose a suitable structure for the frame. In our case, we use a retro floor lamp, which has been gathering dust in the attic for half a century. You can also make a frame from wooden planks. We remove the remnants of the fabric, various screws and other unnecessary parts, completely exposing the frame. Remove rust with sandpaper.
Step two is lighting. The basis for the lighting set is made of wood. You will need a round timber 5 cm high. Using a metal bracket, we attach it to the frame. In a hardware store, we purchase a pre-assembled lighting kit and a dimmer. We mount it to the base.
Step three - decoration. Having prepared branches, long from top to bottom, we begin to form a floor lamp. First, we tie the structure with a rope, which will serve as a holder for branches and a decorative element. The branches are laid out in a row and attached to the frame. The upper edges of the branches are trimmed, they are given an aesthetic appearance. The branches are tied with a rope in several places.
Step four - finishing work. The floor lamp is equipped with a light diffuser, which can be made using tracing paper. It rolls up into a roll and is inserted into the center of the lampshade. The lamp is screwed in, it is better if the "housekeeper" - it does not heat up so much. Ready! Making a floor lamp is not so difficult.
The dimmer will help you choose the degree of illumination you need, depending on the situation and your preferences.
In such a simple way, you can make yourself such an original and practical decor element from improvised means. Bring your ideas to life and create exclusive things that will decorate your cozy nest.
A floor lamp, created with the soul with his own hand, will give you warmth and comfort.
Variety of stylistic options
To make your interior look as natural, relaxed and at the same time refined as possible, the main thing in choosing a floor lamp is not to make a mistake with its stylistic performance.
Modern floor lamps
A combination of modern design solutions, natural motifs and materials and traditional, familiar forms, but without pomp and pretentiousness. These are various forms of construction, from the simplest, "strict" geometric shapes with clear lines to intricate "winding", with a lot of decorative elements.
High-tech floor lamps
Functional, aesthetic and practical lighting fixtures. High-tech high-tech floor lamps allow you to change the angle and direction of the light beam, the height of the ceiling, and the intensity of illumination. Futuristic, bold and creative approach, experiments with geometric shapes and lines - these are high-tech floor lamps.
Floor lamps in loft style
The loft is the most unobstructed style, it is quite possible to freely mix various trends and manners, it is completely open to all kinds of experiments and special design solutions.
Strict beauty and minimalism, straight lines and discreet shades will perfectly complement the design of the room. Their original design captivates true fans of contemporary art and connoisseurs of everything unusual and non-standard.
Provence style lighting
Conciseness and simplicity are the two main rules of the Provence style. Natural and natural materials used for the floor lamp will add lightness and spaciousness, freedom, air purity to the house. Smooth lines, curved graceful shapes, calm, natural shades will create harmony, beauty and tranquility.
People who do not know how to create things with their own hands always admire those who have the courage to do it, calling them creative individuals. And those who are engaged in homemade hand-made do not fully understand the reasons for such admiration, because not everything is so complicated. Especially if we are not talking about creating all the elements of future furniture from scratch, but only about the layout, fitting and author's decor.
Perhaps it is difficult to overestimate the influence of light in the interior. Lighting created at different levels, a well-thought-out scenario, can significantly affect the atmosphere, the general mood of a living space. In particular, floor lamps miraculously create cozy islands in the living space, helping to properly zone it.
Making a floor lamp with your own hands is not just about sewing pillowcases on pillows or putting together photo frames. Nevertheless, the carpentry aspect is present here, and the electrician is involved, and the moment of design cannot be canceled. Let's find out in more detail how to make a floor lamp with your own hands.
Necessary materials for creating a floor lamp with your own hands
You can easily find the necessary materials in a hardware store, an alternative is to use a partially old floor lamp.
- Need to buy electrical cable you can use an extension cord. - It is best to take a three-core wire, especially if the body of the future floor lamp is made of metal.
- It will take cartridge E27 models (the most common option).
- It is recommended to choose lamp energy saving.
- Stick of the required length, full pin. It is undesirable to choose wooden.
- something for grounds- stands.
- Shade.
You took the time to create a floor lamp with your own hands, purchased all the necessary materials - it's time to start the installation process. You should start by laying the electrical cable in the future leg of the floor lamp. Before this stage, you need to connect the wire to the electrical plug and cartridge. Check the quality of the insulation of all joints.
- Making a lampshade with your own hands
It remains to create the most expressive part of the lighting fixture - the lampshade. You can check with a consultant at the same hardware store for the presence of a wire mesh. If there is one, it will be necessary to roll it into a roll so that you get the diameter of the desired size. You can also create a frame for a lampshade from ordinary wire. You need to make a cylinder out of it - in other words, connect several circles along.
When the "skeleton" of the future lampshade is already in place, it's time for your inner designer. How to successfully arrange a floor lamp? First of all, it must match your environment. If this is very difficult to do, try playing on contrasts. Build a decor that will clearly stand out from the general atmosphere and can claim the title of an art object.
- Do-it-yourself fabric lampshade for a floor lamp
For this case, you can use almost any fabric, from linen to durable jeans. By the way, the latter can look very stylish in a bachelor or youth interior.
- DIY knitted lampshade for a floor lamp
It is perfectly acceptable to knit a lampshade from large or small yarn, beat it with decorative knitted elements. Such a lamp can be seasonal, it will look cozy and warm in the cold season.
- Fantasy lampshades for a floor lamp
There are absolutely no rules in creating a handmade lampshade. You can fasten a wicker basket upside down and it will do its job well. Do you have an unnecessary big globe? Why not use half of it for the same tasks? Very original, in the spirit of adventure. You can also make a lampshade from a dozen petals, hearts, butterflies - in a word, anything that can be laid out layer by layer so that an imitation of scales is obtained. It is impossible not to touch upon one of the oldest common methods - tying an inflatable ball with threads, fixing them with PVA glue. After the design dries and the ball bursts, you are left with a strong sphere that can be a great homemade lampshade for your new floor lamp.
How to make a do-it-yourself floor lamp that is modern and harmoniously combined with the general style of the living room interior? One of the interior items that makes any home cozy is a floor lamp, which is a lamp mounted on a long leg. This lighting device is able to turn your home into a small fairy-tale world in which you will feel safe.
Do it yourself floor lamp with your own hands not difficult at all. Unless for the manufacture of a floor lamp stand you will need to know electronics (and even then not thoroughly, but only to a minimum) and be able to handle special tools. To do this, you should take an extension cord, cartridge, electrical cord, as well as a switch, plug and, of course, a light bulb. The role of the leg can be played by almost any long stick, except for a wooden one.
So when you have all these devices and tools for making a floor lamp with your own hands, you can get down to business. First you need to strengthen the stick on the stand, having previously drilled a hole in it for the cord, if necessary. And when all these complex manipulations with wires and electricity are completed, you can proceed to the most pleasant part of your amateur activity - decorating the floor lamp. It all depends solely on your imagination. You can decorate the leg with shells, beads, buttons, beads, and rhinestones (for glamor lovers).
If you like a strict style, then paint the leg of the floor lamp to match the lampshade or wrap in a fancy way with colored wire. In a word, fantasize and come up with an original design for your floor lamp. Just don't forget that it should fit the stopover at your home. At the end of the article you will find some interesting master classes with which you can make beautiful and stylish floor lamps with your own hands at home.
In the event that you already have a floor lamp at home, then making a new one will be even easier. After all, you can remake an old lampby changing the design of the lampshade or legs.
Moreover, the lampshade can be made in two ways:
1. Using white fabric, which is painted with special acrylic paints or decorated handmade floor lamp the same shells, buttons and rhinestones.
2. With wallpaper. For this purpose, you will need a plain white (or cream) floor lamp, wallpaper, and wallpaper paste. Next, we do the following: first we select the wallpaper by lighting them with a lamp.
Your choice should depend on how the wallpaper looks under the light of a light bulb. Then you should measure the length and height of the circle old floor lamp. After that, it is necessary to cut off a piece of wallpaper according to the size of this very circle, while leaving about two centimeters. Break up the glue. Moreover, the glue should be applied in the area of \u200b\u200bthe ends of the floor lamp connection in such a way that the glue is 20 cm from these very ends.
Then attach the wallpaper to the area smeared with glue and press, but not too hard, otherwise the wallpaper will leave bumps that will not look very neat. Thus, applying glue to small areas of the lampshade, you should stick the wallpaper until you reach the seam again. Then just make a bend and apply glue to it. Glue to the seam. Your work should now dry. After that, you can install the updated lampshade on the base of the floor lamp.
We make a modern and elegant floor lamp with our own hands. Master class with photos of all stages of work.
How to make an original paper floor lamp with your own hands. Master class for beginners.
Many designers recommend using multiple light sources in a room, ranging from chandeliers to downlights and floor lamps. This will allow you to illuminate certain areas in the room or create a special spectrum of lighting depending on the mood. But in order to realize the plan, significant financial investments will be needed, since they are creative and cost a lot of money. In this regard, you can make a floor lamp yourself and at the same time not spend a lot of money. You can assemble it from improvised materials, such a product will look good in a country house, apartment or country house. Next, we will tell you how to make a floor lamp with your own hands, providing instructions with photo and video examples.
Step-by-step instruction
Preparation of materials
In order to make a homemade lamp, you will need the following tools and materials:
- lumber and glue for wood;
- hacksaw;
- drill and pliers;
- knife, screwdriver;
- fasteners;
- copper elbow;
- wooden beam for the frame (approximately 140 cm);
- copper tube for the frame (about one meter);
- lamp and electric cord with plug;
- plastic bucket for garbage (openwork).
To make a floor lamp yourself should be step by step. First of all, it is necessary to start manufacturing the base of the structure.
Making the foundation
So, the base is done as follows:
- First of all, two boards should be cut out of the board. One should be 35x5x20 cm in parameters (length, thickness, width, respectively), the other - 30x2.5x15 cm. Other dimensions can be taken, but it must be borne in mind that the base must withstand the weight of the entire structure and not allow it to tip over.
- Then you need to glue the two bars with glue. To do this, the smaller board must be smeared with special glue and attached to the larger board. This must be done so that it is in the center. Using clamps, fix the bars until the glue dries completely.
- After that, you need to measure 5 centimeters from the edge and make a hole with a diameter of 3 cm. And since the base is relatively thick, you will periodically need to remove the wooden parts from the hole. As soon as the hole becomes through, all edges should be sanded.
We make a frame
For the frame, a rack of almost one and a half meters was chosen. This height is chosen taking into account that a home-made floor lamp can be placed near the sofa and the light will fall on it from above. But you can choose a different height.
Before proceeding with the manufacture of the frame, you need to wipe the copper pipe with alcohol. This will remove any remaining stickers and grease.
Then you need to do the following:
We assemble the lamp
To assemble a homemade floor lamp you need:
Inventing a lampshade
Making a lampshade is very easy and simple. To do this, it is enough to have an ordinary office wastebasket for papers with you and follow the following instructions:
The floor lamp is made by hand. Now you can put it near your favorite chair, open a book and enjoy reading. A photo of the finished product is shown below:
A floor lamp for the home can be assembled from a variety of improvised materials. For example, you can simply change an old lamp by adding a new leg or lampshade. For lovers of coziness and comfort, a lampshade made of threads and beads would be an excellent solution. To do this, you need a mesh and threads. Satin threads are wound on the mesh, and the lampshade is installed on the rack.
Also, the lampshade can be constructed from plain white paper or fabric. A homemade frame is wrapped with cloth or paper and with the help of special paints they give it their own style. And handmade jewelry made of beads, shells, rhinestones or buttons will give the lamps their individuality and unusualness.
We recommend watching a video that demonstrates workshops on assembling a floor lamp from improvised materials. Learn how to make a beautiful floor lamp from a washing machine drum, as well as a table model from paper plates:
Such unusual ideas will allow you to create a lamp for any interior of the room. The advantage of a homemade floor lamp is that no one will have such a product. It will be special and personal. Moreover, you can make not only floor lamps, but also build a desktop lighting fixture that can be placed near the bed.
So we looked at how to make a floor lamp with your own hands at home. We hope you liked the provided photo and video examples, as well as master classes and inspired you to make a homemade lamp from improvised materials!
Everyone can make a modern floor lamp with their own hands from improvised materials at home. Use the tips and decorate your home with a new stylish lamp.
A floor lamp is an indispensable piece of furniture that adds special comfort to your home. Under its warm, diffused light, things take on a completely different, fabulous sound. The room is completely transformed, there is a feeling of comfort.
On the interior decoration market there is a great variety of floor lamps made of a wide variety of materials: with lampshades made of crystals or fabric, original solutions made of fish scales, gold plates, wood shavings. One thing is invariable: only 4 things are needed for a floor lamp - a stand, a leg, a lampshade, a light bulb. From what you can make the necessary spare parts, how to put them together, we will consider further.
Necessary materials
It is not at all difficult to make a floor lamp on your own. The only thing that will definitely be needed is knowledge of the simplest electricians plus compliance with safety requirements. There are no special rules for creating a floor lamp - it all depends on your imagination. The lampshade can be knitted, glued out of paper, pasted over with sparkles, shells, flowers. DIY lamps are an opportunity to have fun with family and friends, as well as update the interior of the room without leaving home.
We make blanks
To begin with, we suggest doing a stand. If you didn’t find anything suitable at home, for example, supplies from an old broken fan or floor lamp, we will make a stand ourselves from gypsum. Gypsum is a heavy, durable and easy-to-handle material. For a heavy stable stand, 3-4 kg of dry gypsum is enough. Conceived a large, heavy lampshade - increase the amount of plaster for the stand.
Now you need to choose a shape for the future stand. A large-diameter baking dish with removable sides is perfect for this. Silicone is inconvenient: it does not hold its shape well, and hardened gypsum simply cannot be pulled out of iron with non-removable sidewalls.
Pick the "right" stick. The most practical are metal tubes. They are not very heavy, the electrical cable can be pulled inside, and not left dangling outside. So the floor lamp will look more aesthetic, modern and stylish.
For the lampshade frame, prepare a mesh about 200 cm long and a width equal to the desired height of the lampshade. Start bending one edge of the mesh to make a circle. Choose the diameter of your choice. After cutting off the rest of the wire, begin to bend the protruding pieces of wire, creating a single frame. Do not cut the tails, fill them inside the lampshade. Pass the aluminum tape along the perimeter for the strength of the form (so that the circle does not turn into an oval). From the same tape, folded crosswise, make a frame for fixing the lampshade with a ceiling. Do not attach the frame to the lampshade. First finish the design, then with the lamp on, determine at what height you will mount the lampshade.
Assembling the lamp on the leg
We begin to prepare a plaster stand. Mix gypsum with water to a state of thick sour cream. Cover the baking dish with plastic wrap, put plaster in it. Align the top layer. Mark the middle and stick a pre-prepared metal tube-leg into it. Be careful! The leg must stand strictly vertically in plaster, otherwise your future floor lamp will turn out to be crooked. Gypsum will take about 10 hours to dry. During this time, you can decorate the lampshade for the future floor lamp.
Lampshade Ideas
Since you have already decided on the frame of the lampshade, its height and diameter, it remains only to decide how to decorate it beautifully. Do not forget: the floor lamp should organically fit into the interior of your room. It can be one of the following types:
Remember your grandmother was once fond of knitting and macrame? Such hand-made lampshades were very popular in Soviet times. This work is slow, painstaking, requires skills and abilities. You can simplify it by tying each cell of the grid with fluffy threads and imposing flowers on top. Don't know how to knit? Just wrap the mesh with fringed knitting threads. Get a gentle plush lampshade.
Marine style lampshade. To decorate it, all small pebbles and shells, carefully brought by you from vacation, are suitable. They can be glued directly to the mesh or hooked with wire rings. You can paint the base red, imitating a fishing net. Magnets also fit perfectly into this composition.
Glamor lampshade. Rhinestones, sequins and glass beads are wonderful decorations for your lampshade. Transparent and translucent materials unequally transmit light, making the floor lamp the center of attention.
Floor lamp for nursery. Styling a lampshade for a children's bedroom will help plush toys, stickers, luminous stickers. If desired, suitable plastic toys can be glued to the leg, then painted in one color, achieving unity of the composition.
Hi-tech design. Take chrome paint and paint the leg and stand with it. Braid the lampshade with black wire, leaving small gaps. Cover it with black matte spray paint.
rope ornament. Original and unusual lampshades are obtained from a twisted rope. It can braid the existing frame, or you can create a more original design. The lampshade made of balls of ropes of different colors looks very beautiful. To create a rope ornament, inflate a balloon, rub it with petroleum jelly and lay out an ornament from a rope soaked with PVA glue on its surface. Let the glue dry, pierce the ball - that's it, the lampshade is ready.
The easiest way to change the design of the lampshade without changing anything in the design of the floor lamp is to cover it on top and sides with painted silk scarves. You will see the effect immediately, and the design will not change. Be careful not to overheat, this can cause a fire!
Whatever you decide to decorate your lampshade, follow one rule: flammable materials should not be near a heat source. We recommend using energy-saving light bulbs in the floor lamp. They do not heat up, are economical and will please you longer.
Construction assembly
The gypsum has dried up, you can remove the sides of the mold and remove the stand with the leg. Since gypsum usually has a matte, faded color, we recommend painting the stand and leg with spray paint. When it dries, you can begin to mount an electrician.
We fasten the electrical wire to the wires of the cartridge and pass it through the pipe down. We take it out from under the stand and mount the switch. It will be most convenient to use a foot lamp so that you can turn the floor lamp on and off without bending down. We cut the wire to a length convenient for you, mount the plug. Then we screw in the light bulb and check if your device works. We try on the lampshade, determine the height of the bulb, fix the lampshade. That's it, the decorative lamp on the leg according to your own design is ready to use.
New life for an old lamp
Do you have an old floor lamp lying around in your garage, is it working, but not modern? Give it a second chance: change the design and enjoy the new piece of furniture.
Remove the damaged lampshade, leaving only the frame. Paint the base with fresh paint. Take an ordinary white fabric and sheathe the frame of the lampshade with it. White fabric is a limitless field for creativity. Paint it with acrylics, stick glitter, dry flowers, ribbons - whatever your heart desires.
Wallpaper illuminated by a lamp of a floor lamp looks very beautiful. You just need to pick the right ones. To do this, take pieces of existing wallpaper and see how they look. Having found the right ones, coat the old lampshade with wallpaper glue and glue them. Cut off the excess with an overlap of 3-4 cm at the top and bottom. These overlaps then need to be glued inward so that the old lampshade is not visible. Let the glue dry, then install the updated lampshade and enjoy your work.
Work with the leg of the floor lamp. The winding of the legs with a rope or rope looks spectacular, which will perfectly fit into the marine style. Winding with wire of different colors will add originality to the floor lamp. If you want more brightness, stick rhinestones on the leg and on the stand. Glamor will definitely be provided.
Making things with your own hands is always a pleasant and creative activity. A floor lamp created from scratch or an updated old one from the garage will delight you and your loved ones on long winter evenings. If suddenly you get bored with your idea, you can always add something new or repaint your new leg lamp.
