DIY wall clock - step by step instructions with photo examples. Do-it-yourself educational clock made of cardboard How to make a clock for the nursery with your own hands
Improvised materials can be used for a wide variety of purposes, including creating original clocks that will decorate home interiors.
A wrist-type watch, made independently, will appeal to children and will allow them to quickly teach a child to navigate in time.
There are a lot of options for creating such crafts, and we will tell you about the most interesting solutions on how to make a clock with your own hands at home.
Do-it-yourself cardboard clock, photo
wall clock ideas
One of the most popular do-it-yourself clock master classes is wall crafts. If you want to make a large wall clock, you can use a large vinyl record or disk as a basis. How to make a clock from disks?
It's quite easy:
Attention! Make such a clock in the kitchen with your own hands - and they will be a great gift for loved ones. The record can be cut to the desired composition.
The original wall clock will be obtained from coffee beans. For such crafts, do-it-yourself wall clock decor in the form of decoupage is also suitable.
Master class of coffee wall clocks:
- we prepare a round base and a clockwork;
- choose a napkin for decoration. It is better to take the option with coffee-themed patterns;
- prime the base - and paint the sides in white and brown;
- after drying, cover the watch with glue, diluted in the form in a ratio of one to two;
- glue napkins, remove air and dry;
- carefully draw a scheme for applying grains to decorate the picture;
- after about a third of an hour, we start gluing the grains. They should be close to each other. Instead of glue, you can use stained glass paint;
- after the complete drying of such watches from improvised materials, it remains to decorate the dial and fix the mechanism;
- varnish your hand-made coffee clock for safety.
You can also make a wall clock out of wood. This craft is done in just a few steps:
- take a sawn off piece of wood of the right size. You can make a clock from plywood if there is no natural fragment;
- remove the bark, clean and remove all unnecessary. We give the tree the desired shape;
- in the center we make a hole for the arrows;
- varnish a smooth surface;
- we fix the mechanism for the clock and make out the dial.
Attention! A wooden wall clock can be made from saw cuts of trees with a thickness of about three centimeters.
Do-it-yourself wood clock, photo A stylish do-it-yourself clock from a plate will complement the kitchen theme. All we need is to fix the mechanism and hands, as well as decorate the base of such a watch. Any wall-type clock can be decorated with homemade frames. For example, watches made of tires are popular: it is enough to fix it around the dial.
Homemade clocks made from spoons and forks are great for the kitchen. As a basis, let's take a box from the disk - and give it a round shape.
- drill a hole in the center;
- wash and dry plastic cutlery. Degrease for ease of staining;
- glue them in a circle, observing the correct distance between the "divisions". Alternate spoons and forks with each other;
- paint all the elements;
- fasten the mechanism - and turn on the clock. Now they can be mounted on the wall.
There are many more ideas for creating bright and unusual clocks on the wall, and they are suitable not only for the kitchen, but also for other rooms. Therefore, look at the photo of the wall clock with your own hands to make it even more original.
How to make a clock on the floor and on the table
The specificity of creating a table clock is associated with the need to use a reliable stand for the dial. Otherwise, this process is quite simple, and you can use quite a few material options for such crafts.
It is more difficult to make a grandfather clock for a home interior. It is better if you use the drawings to cut out the wooden case. Get a suitable clockwork and also decide whether it will be a cuckoo clock or a regular model.
The dial of such watches is made of copper sheet. The hands for the dial can be made on a brass base, as well as the weights in the central part of the case.
Step-by-step procedure for creating grandfather clocks:
- we make a plinth. The legs are glued to the lower frame, and only after that the body of the structure is assembled. Reinforce the walls of the base with pins and corners. Check that such clocks are stable;
- cut a groove in the upper frame of the product - and insert the case. Attach it to the plinth with screws. Insert the glass into the door;
- the last to assemble the watch case. Carefully check all dimensions and adjust the parameters to fit the rest of the details. How such watches are assembled, see the diagram.
When fully prepared, install the clockwork, as well as the weights and the pendulum. For a harmonious design that matches the style of the interior, you can repaint the clock or varnish the surface.
Wristwatches for children and adults
Very quickly crafts made of cardboard clocks for children are made according to layouts. By looking at different schemes, you can make cardboard clocks of any shape and size. The simplest cardboard clock models will help your child learn to tell the time faster.
So, here's how we make clocks with our own hands:
Advice: You can make a fashionable textile watch by attaching a homemade strap to any watch face.
You can implement other DIY clock ideas on a paper and cardboard basis. For example, a paper clock will turn out to be voluminous if you make it using the origami technique. These paper clocks for kids fold in just a few minutes.
Unusual watch crafts
How to make an hourglass with your own hands? To create this unusual watch, let's take a couple of identical plastic bottles. Pear-shaped containers are ideal.
Sand clock making process:
- we clean the bottles of everything superfluous and wipe with alcohol;
- remove the covers and glue them tightly together with the flat sides. Use a good quality permanent adhesive, not regular PVA;
- now make a hole in the lids. Depending on its size, the rate of sand pouring will change;
- screw one of the glued caps on the bottle. Now, using this design, pour sand into the second container, checking the time. So you can determine the right amount of sand;
- wind an empty container onto a sand-filled one - and turn it over on a flat surface. Now you can check the operation of the clock - and, if necessary, correct the parameters of the hole;
- at the end, the bottles are connected with adhesive tape and decorated.
Advice: instead of ordinary sand, you can use colored, as well as small grits or sparkles.
Another interesting craft option is a sundial for a kindergarten or summer cottage that any child will love. Sundial comes in several varieties, one of the simplest models is horizontal.
Here's how to make a sundial in the country for children:
- on the basis of plastic or wood, make a triangular-shaped arrow (gnome) with a base at a right angle. The second angle of the arrow should be the latitude of the settlement where the clock will be set;
- now we make the base of a durable material (it can be anything, starting with ordinary cardboard and ending with a stone surface);
- we place all this on the ground, we fix the arrow in the center. We focus on the north side;
- we make divisions with numbers, focusing on the time of the day and counting every hour on a timer;
- after readiness, we turn the clock correctly.
How to make a sundial with your own hands - watch the video:
Do you want to know another way to create an original watch with your own hands? With the help of bottles, water clocks are also made. To do this, the bottle is cut into two halves, a hole is made in the lid. This part of the bottle is turned upside down - and inserted into the second half of the container.
Next, you should measure the number of droplets that will pass through the hole in a minute. If necessary, you can make a clock that will help you measure other periods of time. When the right time has passed, mark the water level on the plastic.
Now it remains to close the plastic structure, as well as decorate the clock to your taste. An older child can be attached to the process of creating such crafts.
Read about how you can make a complete process for making a simple but comfortable pouffe for the interior.
Read about creating paintings from toilet paper and PVA glue - all the secrets and subtleties of making original panels and paintings.
Homemade watch decoration options
Now let's talk about how to decorate wall, floor and any other type of clock with your own hands. The most common way to decorate is to use paint, glitter, watch face stickers, and other bright details.
Advice: to create a cozy atmosphere, you can make a clock out of photographs on the wall by sticking photos adjusted to size and shape on the dial, or decorating it with frames in a circle.
DIY wall clock design, photo Immediately decide how to make a clock face, since the possibility of further decor will depend on this decision. For example, you can embroider numbers or skip a ribbon on fabric, and stick symbols on wood and cardboard.
Modern loft-style clocks can generally be decorated with unusual coatings (for example, imitate brickwork) or made in an unusual shape from materials that are easy to modify.
If these are models that stand on a shelf or table, a watch stand will serve as an additional decor. Depending on the style, you can even use antique figurines or gilded paint for a luxurious effect.
Another element of do-it-yourself watch decor is the hands for the dial. How to make clock hands with your own hands? For example, from wire, cardboard, wood, and even pens and pencils. And the design of wall clocks can be supplemented with mirror, glass frames or decorated with other stylish materials.
DIY watch decor, photo There are a lot of options for decorating and decorating such crafts. You can involve a child in this process, who will push you to creative solutions. By the way, today even whole sets for creativity are sold, and you can make beautiful watches with your own hands from scratch.
Use photos and videos - and you are sure to find bright ideas that you will like.
Video
Watch a master class on children's crafts for school - the lesson tells you how to make a decorative clock from colored paper:
A new wall clock can transform the interior of your room, and for this it is not at all necessary to go around many shops in search of suitable options. We offer you a couple of lessons from which you can get ideas on how to decorate a dilapidated boring clock or make a unique new one from a variety of easily accessible materials. In addition, they will be a good gift, especially for those of your friends or relatives who are not particularly punctual.
Master class №1
A very unique clock can be made from an embroidery hoop and a set of decorative buttons. You have the opportunity to choose a fabric base that matches your interior in color and texture, and use a collection of buttons lying around in all sorts of colors and sizes.
- dilapidated clock or clock mechanism with arrows;
- hoop;
- textile;
- buttons;
- tape or braid;
- (optional) cardboard or a narrow plank.
Take a clock mechanism or a dilapidated wall clock, which is not a pity to disassemble and remake. Remove the arrows and the nuts holding them together, along with this, remember the sequence in which they are attached.
2: Hoop the fabric between the hoop, cut off the excess edges and sew on the buttons, positioning them in the same way as the numbers on the dial.
Now you need to fix the clock mechanism. Make a small hole in the middle of your dial and attach the mechanism on the reverse side so that the mount for the hands is located in the center of the dial. In order to fix the mechanism, it is possible to cut out a circle of cardboard or wood, the same diameter as the hoop, and glue the mechanism to it. Or maybe it is on a decorative ribbon, fixing it on the hoop and making a small loop so that the clock can be hung on the wall. Screw on the clock hands. Ready!
Step by Step Lesson #2
From old newspapers or magazines it is possible to make such unusual wall clocks.
For work you will need:
- about 24 pages of the same size, cut out from old newspapers or magazines;
- pen or pencil;
- scissors;
- transparent adhesive tape;
- long needle;
- silk thread for embroidery or floss thread;
- two clear plastic discs (from the CD packaging);
- a circle cut out of cardboard with a hole made in the middle;
- clock mechanism with arrows.
Take a pen or pencil and wrap a page from a newspaper or magazine around it. Make 24 such "tubes". Secure the ends of the tubes with clear duct tape to keep them from unwinding. Step back about a third from the end of the tube and bend it in half in this place.
Take a long needle, thread a silk thread (or floss thread) into it and thread the needle through the bent end of the tube. Pull the needle and tie a knot at the end of the thread, then sew the remaining 23 tubes, placing them in a circle.
Take a transparent disc and place it on top of the stitched tubes so that the hole in the middle is placed in the center of the circle of tubes that you have. After that, attach the clock mechanism, making sure that the place where the hands are attached coincides with the hole in the disk.
Turn the clock over and attach the second disc. Place cardboard on top, fasten the clockwork with a nut.
Screw on the hands of the clock and you're done!
Another DIY wall clock
Such a clock with unusual arrow-legs of John Cleese from the Ministry of Silly Walks can be a good gift, which, due to the fact that the clock is designed in a neutral black and white style, will fit into virtually any interior.
- canvas size 20 x 20 cm;
- clock mechanism with arrows;
- decoupage glue, brush;
- PVA glue;
- plastic (it is better to use not well-bent plastic, for example, dilapidated plastic folders are perfect);
- printed and cut numbers for the dial, and an image of John Cleese;
- awl;
- scissors and scalpel;
- wire cutters;
- dark marker.
Print the John Cleese clock face (archive download here) on an A4 page, cut the sheet to approximately 21 x 21 cm.
Wet the image lightly with water and allow it to soak in. In the meantime, grease the canvas with glue. Carefully stick the wet image onto the canvas and smooth it out. After that, apply another layer of transparent glue, press the edges of the paper and leave the canvas to dry. After everything is dry, it is possible to apply another layer of glue.
Cut out the legs according to the template, along with this, leave a margin of approximately 0.5 cm along the contour. Wet the image lightly with water and set aside to absorb the moisture.
Take a large piece of plastic and apply glue to it, then carefully glue the legs cut out of paper, smooth the image. Cover the painting with glue again and leave to dry overnight.
If you find that after drying the plastic is slightly bent, a sheet of thick paper and glue it on the back.
After the part is completely dry, take a scalpel and carefully cut out the image of the legs along the contour.
First of all, mark the middle of the canvas. After that, use an awl in the center of the canvas to make a hole. It should be large so that through it it is possible to insert a mount for the clockwork hands. Insert the mechanism from the reverse side and secure it with a nut.
If, in addition to this, the set of your mechanism includes an iron ring before fastening between the nut and the canvas, then so that it is not visible, it is possible to print the image of John Cleese again, cut out a circle of a suitable diameter with a hole in the middle from it and glue it so that it closed the iron ring.
Take the hands of the clock and place them on top of the legs cut out of plastic. Mark with a pencil the places where you will need to make holes for attaching the arrows. If necessary, cut the arrows so that they are slightly smaller than the plastic figures of the legs, then glue the details on the arrows. After the glue has dried, attach the hands to your watch. If necessary, the fixing nut can be painted with a dark marker.
Ideas for inspiration
And finally, we offer you a couple more examples of how it is possible to decorate, remake or make your own wall clock - draw inspiration and create!
You do not need to know the device of the clockwork at all in order to make original DIY wall clock. In any home there are broken clocks and inexpensive Chinese-made alarm clocks. From all this wealth, you can create original and useful decorations for the interior with your own hands.
WHY IS A WALL CLOCK SO INTERESTING?
Clocks are a kind of conductors of a mysterious invisible, but felt by all, energy called Time. Therefore, in the human mind, the clock also carries a charge of something mystical. Watches have an interesting, inexplicable property to speed up or slow down as they please. People will always be indifferent to the clock and to the Time personified by them.
How to make a wall clock with your own hands?
Check out these cool design ideas. The photo shows that creating an original wall clock with your own hands is quite within the power of a simple housewife. As a design solution, such a handmade clock will be the brightest and most attractive place in your interior!
Here we should proceed from the fact that anything can be a dial. The main thing is that such watches should be beautiful and, like design objects, they must carry some idea.
Creative thought that has received a direction is very fruitful. Once you feel like a designer, it's forever. And such a fertile direction as the creation of original wall clocks with your own hands is simply inexhaustible.
Here is a photo of a dial made from the cover of a large wooden reel, on which cables were previously wound. Here the designer saw exactly the interesting texture of the lid as a circle, not paying attention to the main purpose of the item. Stenciled inscriptions and a metal overlay on the opening of the coil perfectly emphasize the idea of a dial made of wooden planks.
Clocks made from halves of a globe require quite a lot of space, but look amazing. Such watch-compositions are suitable for and will give the spirit of travel. By the way, such watches can be well suited for a travel agency.
Wall clocks create something so homely, like a grandmother's chest ...
A ball clock with rounded hands is a real time machine.
Wall clock-picture and the following image, a clock made of a flat surface draped with an unusual material can be suitable for a living room and a hall ...
An interesting color scheme visually hides the arrows on the clock, and the map clock will allow you to travel around any country. Additionally, you can specify a lot of different data, mark the places where you have been with flags. A very original design solution for a DIY wall clock.
But this laconic clock in the form of a chessboard is well suited to the strict style of a living room, office or library.
A clock from a tin can is, of course, for the kitchen. The following photos clearly show that even such an abstract thing as a clock spring can be a decor item.
A very interesting decision is to make the dial from a saw cut of a tree, and the hands from twigs.
Figures cut from old gramophone records can be distinguished as a separate type of creativity. They themselves are very creative and have the right to life. But in combination with the idea of time indicators, it's just super!
DIY wall clock design
People very often, getting used to a certain environment, do not dare to make even the slightest change in it. And this staticness is so contrary to the creative spirit that sits in each of us. Try to change this static, start with the original DIY wall clock.
Various types of watches accompany us everywhere. Wall, floor, wrist. It is simply impossible to do without them. They are used not only for the practical purpose of telling the time, but also for decorating the interior. It is quite possible to make a watch with your own hands from improvised materials.
Interesting options for wall clocks
In fact, there are a lot of options for creating a wall clock at home, but I want to consider the most popular of them.
From vinyl records or discs
How to make a wall clock from vinyl records or discs with your own hands will tell detailed instructions:
Prepare a vinyl record or disc, remove all stickers and dirt from its surface. If you use a disc, then choose with a white core. Prepare the clock mechanism in advance, purchase or use from old clocks.
Apply a primer to the surface with a special spray gun and cover with acrylic, if necessary. Leave for some time to dry. Make the background of the clock more saturated with acrylic in bright colors or gold.
When using a vinyl record, it is better to decorate its surface using decoupage. To do this, prepare a paper picture or from a napkin, apply a layer of glue to the surface of the dial, moisten the picture and fix it on an adhesive base. Apply a layer of glue on top, gently smoothing the surface so that bubbles do not form, and dry.
Cover the drawing with acrylic varnish in three layers. Make suitable numbers and fix on the dial in the right places.
Make a hole in the center of the plate and fasten the mechanism with arrows, which can be of a different color as you wish. Install the battery, set the correct time and hang the clock on the wall in the right place.
Such handmade clocks can be presented to friends and relatives, or decorate the interior of any of the rooms with them. Many options for do-it-yourself watches using decoupage technique are shown in the photo.
coffee theme
A clock decorated with coffee beans is suitable for the kitchen. And the creative process will give you a lot of pleasure:
- prepare the clock mechanism and the base in the shape of a circle;
- for a beautiful do-it-yourself clock decoupage, select a suitable picture with fragments related to coffee;
- prime the surface and paint one side white and the other brown. Leave the product to dry;
- cover with adhesive composition (glue diluted with water - 1: 1);
- lay the picture evenly so that bubbles do not form, and dry;
- schematically depict the arrangement of grains;
- Arrange the coffee beans on the drawing according to the scheme. Lay the grains close to each other, securing with stained glass paint;
- leave the product to dry, then apply the numbers and mount the clock mechanism;
- fix the decorated surface of the dial with clear acrylic varnish.
Wood clock
It is even easier to make original and stylish wooden clocks for ethnic interior styles:
- take a saw cut of a tree of a suitable shape and size, no more than 3 cm thick;
- clean from the bark and unnecessary parts, if necessary, adjust the shape of the future dial;
- make a hole in the center for installing the hands and clockwork;
- apply varnish to the surface and let it dry;
- mount the mechanism and fix the numbers.
Clock-plate
A clock from a plate will also decorate the kitchen interior, and besides, it is easy to make them. It is only necessary to drill a hole in the center of the plate, mount the mechanism with arrows and decorate as you wish.
And master classes by the clock with their own hands will tell and show a more detailed work procedure.
With cutlery
Continuing the kitchen theme, I would like to consider another version of the watch with your own hands using cutlery: forks and spoons.
- take a box from the disk, cut out a circle and paint it in the desired color;
- drill a hole in the center;
- wash the cutlery thoroughly, dry it and degrease it;
- fasten them on the back of the circle at regular intervals, alternating with each other;
- paint them in different colors;
- install a mechanical device and hands, set the time and decorate the interior of the kitchen with a clock.
For more of the best DIY decorative watch frame ideas, check out the related websites.
DIY watch photo
Comfort and coziness in our home sometimes depends on even the smallest details and elements. Even most interior designers agree that the most important attributes for getting comfort in the house are well-chosen curtains, original lamps, soft and chosen in the right shade, blankets, pillows, bath rugs and clocks.
This article will focus on a master class on how to decorate a clock at home yourself.
There are a large number of photos of watches on the Internet, most of them are made by famous designers, but making original watches at home is also not difficult.
There is, of course, one key and difficult moment - this is the installation of a mechanism on the clock for its operation, but the finished mechanism should be bought in a store and installed according to the instructions. But the appearance of the future watch and its rest design completely depends on personal preferences and tastes.
There are several modern techniques that help to independently make watches in any style.
Decoupage watch style
A similar technique for designing and creating a wall clock involves working with a ready-made store template, where there is already a blank, the base of the hands and the finished mechanism. You can also purchase ready-made patterns on paper, special paints, glue and other decoupage elements.
The workpiece for the clock is made in this way: several times the base is covered with a primer of acrylic paints, and finally polished. The desired shade and texture is given to the base in the next step.
There is one trick - if you want to make an old-style watch with a shade that is scuffed, then the paint must be applied with a sponge.
Decorating a wall clock with your own hands is a process of bringing out the imagination and creativity of a person. You can stick special water stickers on the base. Or draw a preliminary sketch yourself and transfer it to the dial.
After that, the finished mechanism and arrows with numbers are already attached. After a series of actions, the clock, created by oneself, will come to life, and will give the house a special original look.
Quilling clock
Quilling is an arts and crafts process in which you work with straight strips of multi-colored paper of various widths. Such strips, as a rule, are twisted and glued to the surface, while creating the most varied patterns and pictures.
To create a clock using this technique, it is best to take a tree as the basis of the clock, since quilling elements can be well glued to it.
The color scheme should be in harmony with the interior of the room. After all, a bright clock will look ugly in a room made in a minimalist style. Therefore, the choice of shade is a key moment in this matter.
Most often, multi-colored quilling elements are used to create flowers, insects, trees, animals, berries, and so on.
Plaster clock
Ordinary gypsum tiles will serve well as the basis for future watches.
Romantic and reverent natures will surely find a large number of solutions for creating watches from this material.
Among professionals, such a tile is called a medallion. The mechanism of the future clock is attached to its back side. To make the product look more elegant and restrained, its surface should be covered with matte paint in light colors.
And, if you want some highlights, then glossy paint will do.
Note!
This material is most suitable for creating clocks in the bedroom. At the same time, shades are chosen - beige, pale pink, pearl, the color of coffee with milk, purple and so on.
Clock with wooden sticks
In this situation, you should have items such as sticks and quality wood, good glue, scissors, and a ready-made work clock with a flat surface in your arsenal.
Many small sticks of the same size should be cut out of wood, and then connected
If the sticks are applied to the base in two layers, then you can achieve a wonderful “explosion” effect, which looks luxurious and original.
Now you know how to make a clock at home. Handmade clocks are ideal for the kitchen, and for the hall, and for the bedroom.
Note!
DIY watch photo
Note!
