The volume does not work on the iPhone 5. Why the sound in the headphones does not work on the iphone
The question of why there is no sound on the iPhone can even arise for owners of completely new smartphones, not to mention the owners of 4 series models. For example, when you turn on the headphones, music plays both in them and in the phone at the same time. Either the system sound is completely absent, or it appears and disappears, or ... Situations are very different. As a rule, such complications appear for two reasons: mechanical damage and software failure.
The problem does not arise out of the blue: if there is no sound on the iPhone 5S or some other model, this means that the smartphone was dropped, allowed to get wet, worn without protective cover in a dirty pocket, carelessly connecting and disconnecting headphones, or installing unlicensed software from dubious sites. All this, and by no means a factory marriage, in most cases leads to problems.
First steps if the sound on the iPhone is gone
First of all, you need to identify the essence of the problem. If the sound is not completely lost on your iPhone, and the music plays simultaneously in the headphones and the speaker, or it does not play, but the sound turns on with an incoming call or SMS, this means that the contacts of the loop are dirty or oxidized. On the forums you can find a lot of recommendations on how to clean them with a needle, toothpick and alcohol. But in most cases, such amateur performance only exacerbates the situation and leads to more serious breakdowns. It is best to entrust the solution of this problem to professionals immediately. They will diagnose and promptly replace the failed parts.
You may have lost sound on your iPhone 4S after using headphones. This means that the phone simply did not respond to the disconnect. remote device. Try plugging in your headphones again, turning the volume up to maximum, and pulling the plug out of the jack relatively abruptly. After that normal work dynamics should be fully restored. Nothing happened? In this case, it is necessary to replace the upper cable together with the connector. More accurate information will be given by specialists after diagnosing the device.
Other reasons why there is no sound on iPhone
The phone works fine when listening to audio files and watching videos, but the musical accompaniment of all applications is completely or partially missing? It can be argued that a software failure has occurred. In this situation, sometimes it helps to restart the smartphone or reset all settings that will be updated to factory settings. In this case, all notes, contacts, video, audio and other files will remain in place, as specialists will make a backup copy of the data.
After installing some application, the sound disappeared in the iPhone 5 or another model? This means that the new program disrupts the smartphone. It must be deleted immediately, after which the phone should be rebooted. Did not help? Contact the service center for a flashing.
Often, owners wonder why there is no sound on an iPhone if the smartphone is brand new, for example 5C. And such misunderstandings arise due to the forgetfulness or banal inattention of the owners. So, when performing some manipulations, silent mode is accidentally turned on or the volume is reduced to a minimum. Try going into settings and turning off the Mute feature, or just adjusting the Volume level.
Lost sound on iPhone, but can't fix the problem?
If the above manipulations did not bring any result and there is still no sound, this means that the matter is most likely mechanical damage, which can only be repaired at a service center. Think about whether you have dropped your smartphone on a hard surface, and whether you are sure that water has not got into it. In any case, do not try to disassemble the phone yourself, as this will inevitably lead to serious damage. Apple devices aren't cheap enough to experiment with.
To identify problems, professional diagnostic equipment is required, which is available only in specialized workshops. Even a complex iPhone repair will be much cheaper than buying a new device, so you should not try to save money. Our service specialists will be happy to advise on all issues. They will promptly perform repairs of any complexity, leaving to your home or office. Call!
Hi all. Today we’ll talk about a common problem for all iPhone and iPad owners. Lost sound from speakers. Who is to blame and what to do?
Description of the problem
There is no sound from the speakers, although there is no visible mechanical damage No. The volume up / down buttons work, the screen shows a change, but the sound still does not appear.
Solution
Step 1
The very first thing to do (everyone forgets about this). Try toggling the "volume off/screen orientation lock" button. This button is available on older iPad/iPhone models (iPad Air and older, iPhone 6 and older). The button is located above the volume up/down buttons.
Step 2
Try inserting headphones into the headphone slot. Turn up the volume on them. Then take out the headphones. It rarely happens that the iPad/iPhone just forgets to switch to the sound of the speakers.
I haven't had this in a long time. Last time in iPad 3. Maybe this problem affects only older models?!
side problems
If the sound is quiet in the headphones
You may have volume limitation enabled:
Settings->Music->Volume limit.
If the slider does not work, then you have a restriction enabled:
Settings->General->Restrictions->Volume Limits. You need to put it on "Allow changes".
If one earpiece does not work
Try checking the following setting:
Settings->General->Universal access->Mono audio. It must be turned off. And just below there is "Setting the volume balance between the left and right channels." The slider should be exactly in the middle.
It also happens that the channel is clogged. Take a toothpick and carefully remove any dust from the headphone port. Dust gets there over time and accumulates. Because of it, the headphones do not fit snugly into the slot.
General ways to solve problems
If none of the tips can solve your sound problems, then try the following:
a) Reboot iPad/iPhone
b) Be sure to back up your device before the next step.
Settings->General->Reset->Erase content and settings.
This action should be done only as a last resort, if absolutely nothing helps.
If a full reset did not help, then you need to carry the device to the service of specialists. You may have a damaged speaker or sound controller. But this is very rare unless you drop your phone or dip it in water. Usually, the tips above help solve sound problems ...
Good luck to everyone and less damage! :)
Articles and Lifehacks
The popularity of "apple" smartphones is very difficult to challenge. It happens that their owners are faced with various kinds of problems - for example, no sound on iphone or it is completely absent. Of course, any pleasure from operating the device is lost from this, especially since now it does not perform its most important functions.
The reasons for this problem can be very different. For example, a malfunction may well be caused by the penetration of dust or moisture, as well as mechanical damage. In addition to physical causes, it happens that the problem lies in the software. Dealing with it will be the easiest, and it is quite possible to do it yourself.
What to do if the sound on the iPhone is gone?
Let's start with the simplest: let's try to increase the volume level. To do this, you need to use a special regulator. The sound level is built separately for both speakers and headphones. If the headphone icon appears even when the headphones are not plugged in, then the jack needs to be cleaned carefully.
If everything is fine with the volume, you can try restarting the iPhone. If this does not help, you should continue to identify the source of the problem. Where does the sound come from - headphones or speakers? It is also worth checking if it is there when listening to music, receiving a call and SMS.
For additional verification, you can open any application. If there is sound when it starts, but in all other cases it is not there, most likely the problem is related to software. The same applies to cases of partial loss of sound, or the appearance of sound only in the headphones.
If the sound on the iPhone is gone, it is quite possible that resetting the settings will help. We go into the main settings of the device, the item "Reset", and proceed to reset all settings. There will be a factory reset, but all data (like music or contacts) should remain.
If you still don't hear sound, you can apply light pressure on the iPhone from the bottom and top of the speaker, and gently tap it. Sometimes the sound comes and goes. This means that this is a physical problem, and you need to contact a specialist with it. Sometimes a firmware update helps. Often the problem occurs after a jailbreak.
What causes sound loss on iPhone? A few more tips
Oddly enough, in most cases, the user encounters problems after he disconnects the headphones from the device. You just need to try reconnecting and disconnecting them.
If the sound disappeared after we installed any program, the best thing to do is to uninstall it and simply restart the iPhone.
It is not uncommon for dust or moisture to get into the speakers. They need to be cleaned using a small brush. It is also necessary to check if the silent mode is activated on the device (“Mute”). To do this, go to the settings.
If none of the above helped us, you will need to contact the service center. The same can be done from the very beginning if we are not sure that we will not damage the device with our actions.
If you are a happy iPhone owner, you have probably noticed that you use its functions on a daily basis. Now imagine for a second that the sound on your iPhone does not work. Unpleasant and uncomfortable, right?
Such a misfortune can happen for a variety of reasons. It is the reasons for the loss of sound and their solutions that we will consider today.
By the way, the sound can disappear both in the phone itself and in the headphones. The problems are essentially similar, but at the same time, with technical side, quite different.
Turn up the volume
If you are using a smartphone for the first time, then you probably do not know yet that the volume buttons are on the end. Just click on the top button, it is responsible for adding sound. This is the easiest option.
Photo: volume up and vibrate buttons
It should also be taken into account that the volume for regular speakers and headphones are configured separately. Also, the headphones can only be configured when connected to the device. If not, then you adjust the volume of the phone.
It often happens that the headphones have already been taken out of the phone, but it still shows that they are connected. Try to clean the nest carefully, this should solve the problem.
Photo: headphone volume adjustment
Reboot your device
If raising the volume with the button does not help, then something is wrong. First of all, restart the phone, and then check the sound first of the native speakers, and then in the headphones.
Photo: phone on/off/reset button
Headset jack problem
If the sound on the iPhone only works in the headphones, then there is a problem with the connector. Clean it up, look inside. Be sure to inspect for mechanical damage.
The main signs that there are problems with the mini jack (3.5) connector (headphones should be turned off with the following parameters):
Sound control chip
Inside the iPhone, there are only two chips that are responsible for the sound. This:
- audio codec;
They can be damaged both during water ingress into the case, and with a strong impact. In case of damage, you only need to replace it, there are no other solutions. By the way, if the above microcircuits do not work, then the sound during a call will not work.
Mechanical deformations
In case of mechanical damage to the phone, there is a high probability that either the speakers or the sound control chips will fail. In both the first and second cases, it’s better not to try to solve the problem yourself, since you most likely won’t be able to properly disassemble the iPhone the first time. Damage something, and repairs will cost several times more.
Moisture ingress
Moisture getting inside the phone is an unpleasant phenomenon. Both certain functions and the phone in general can fail. The same applies to sound.
As soon as the phone is pulled out of a humid environment, you must immediately do these simple steps:
- de-energize the device;
- remove residual moisture.
The main problem is to de-energize.
Photo: iPhone board after being dropped into water
The fact is that the owners of Apple smartphones do not have direct access to the battery, respectively, in order to pull it out, you will have to disassemble almost half of the phone. If you do not have the skills to disassemble Apple technology, then it is better not to try, immediately take the phone to a service center. Do not under any circumstances turn it on!
What should never be done:
- dry the phone on the radiator of the heating battery;
- check the phone for performance after self-drying;
- put the device in a container with rice. This is a myth, rice will not help you in any way.
Video: Sound problem
The protective mesh of the speaker is clogged
If the sound still works, but not correctly, or the sound quality has deteriorated significantly, it has become much worse to hear, you should make sure that the speakers are not blocked by anything. For example, a cheap case that is not properly made can partially cover the speakers.
Photo: Cleaning dust off iPhone speaker grilles
The purity of the protective mesh also plays an important role in sound quality. If you notice that the grate is very dirty, take a soft brush and clean it with light strokes.
This cleans both the speakers and the microphone. To check the performance, we advise you to record your voice on a voice recorder, and then listen to the recording. If the sound is clear, then everything is fine, but if not, if the recording is intermittent, then either you didn’t clean it well, or it’s time to take the phone to a service center. If you do not even hear a call, the speaker is most likely broken.
If the sound disappeared for no reason, then the problem is software, and, most likely, will be solved after a reboot. If the problems with the speakers started after the smartphone got into the water, mechanical damage, then you have to carry the device to the SC, the problem is 100% hardware.
The main argument in favor of buying an iPhone is high quality and longevity of Apple products. But due to time or careless handling, even these phones may experience problems, for example, the sound may disappear.
iPhone Audio Symptoms
It's hard not to notice if the iPhone has completely stopped playing any signals, but sometimes the problem may not be so obvious. Trouble is also indicated by:
- lack of response to volume changes;
- playing music only through headphones;
- lack of audibility when calling;
- noise when recording through a microphone;
- wheezing and loss of clarity;
- Sound does not work when playing videos or playing games.
Why did the sound disappear?
The cause of the sound malfunction in the iPhone may be:
- audio channel pollution;
- moisture ingress;
- microphone failure;
- mechanical damage to the speaker;
- soldering of one of the microcircuits due to the impact of the phone;
- broken headphone jack.
In rare cases, there is a factory defect, but then the problem is detected at the very beginning of operation, and the official service center will rush to replace your device with a new one.
What to do if there is no sound in the iPhone?
If you detect loss of sound in your iPhone, start diagnosing with the most obvious reasons: check the volume level and vibro mode status.
If there really is a malfunction, then insert the headphones and check if there is sound in them. Absence sound signals through the speakers and their audibility through third-party devices indicates a malfunction in the connector caused by dirt particles. In this case, you can try to gently clean it yourself with a toothpick.
If the device has recently been dropped or moisture has got inside, you should immediately contact the service center. Any manipulation, even turning the iPhone on and off, can aggravate the situation.
Reliable diagnosis of a malfunction can only be performed by a specialist. Depending on the problem, cleaning, repair or replacement may be required. separate parts phone. Remember that fixing an iPhone is a job for the masters of their craft.
