Septic tank Topas 5.8: device, principle of operation, installation and maintenance
Do-it-yourself installation of a Topas septic tank involves six main stages:
1.Preparatory stage
After you brought the Topas septic tank to the site, you need to choose the place where it will be placed. There are some features of the installation of the station: place it at a distance of 5 m from the house. Next, prepare a pit for the Topas septic tank. The dimensions of the excavated pit must be larger than the dimensions of the installation.
2.Installation of the cleaning station
At the bottom of the pit, pour a cement-sand mixture, the thickness of which will be 15 cm. Such a base will help prevent damage to the station. If groundwater is located close to the soil, then it is necessary to select a Topas septic tank, in which there will be a built-in pump, which, if necessary, will ensure the removal of treated sewage.
3. Organize the sewer system
You will need special sewer pipes with a diameter of 110 mm. It also needs to be calculated correctly. Insert the pipe to a depth of 70-80 cm.
4.Organization of plant sealing
Drill a hole in the outer casing of the unit, which will serve as a means of sealing the sewer pipe. Solder the special cord, which is included in the installation package, to the nozzle placed in the hole.
5.Connect the power supply
Since the system works together with electricity, it is necessary to connect the Topas septic tank to the power supply. Connect a special cable to the station and run it to the shield.
6. Pressure equalization
The final stage consists of equalizing the pressure of the plant. To do this, in parallel with pouring water into the septic tank, fill it with sand and immerse the installation in the ground to the required level.