• Repair
• Repair 
• Interior Design
• About everything
• About plumbing

Unique DIY Roman blinds: photos, step-by-step instructions, useful tips. How to make Roman blinds with your own hands How to sew a Roman blind at home

Roman blinds, like all types of curtains, are designed to protect your home from dust, dirt and prying eyes. They will fit perfectly into the living room, bedroom or even kitchen. Their main advantage is simplicity. The curtain takes up only the space of the window opening. There are simply no folds, draperies or other elements. Its design is simple, so even a beginner can handle sewing. It is important to choose the right fabric, prepare patterns and follow the step-by-step instructions with photos. And in addition to this, watch the video master class. Curtains made by yourself will undoubtedly delight you and please others.

Curtain design

What is a Roman blind? This is a piece of fabric rectangular shape, divided horizontally by drawstrings. Rigid rods are inserted into them, which help form even folds on the curtain. Rings are sewn to the edge of the fold, through which ribbons or ropes are threaded to lift the fabric.

A plastic strip is attached at the bottom of the curtain, which acts as a weighting agent. It is inserted into the folded edge or fixed on hinges.

On the side, the Roman blind can be free or attached to the guides. It is very convenient to use it if the kitchen has roof windows.

Material selection

For Roman curtains will do any thick fabric, because air lung the canvas will not be able to hold the desired shape. However, you can sew curtains from soft fabric, it all depends on what you want to get as a final result. Unlike French curtains, the Romans won't need much material.

Advice. Buy high-quality fabric, do not spare money. Ready made curtains good stuff can last a very long time.

In addition to the fabric, you will need:

• Wooden blocks, one of which should be the same length as the future curtain, and the second should correspond to the width.
• Rail. Its length should be slightly shorter than the curtains.
• Velcro tape and ribbon along the width of the curtain.

• Plastic or metal rings.
• Nylon cord.
• Cord fastener.
• Scissors.
• Flexible tailor's measuring tape.

Calculation of the amount of fabric

To correctly calculate the need for material for sewing Roman blinds, you need to add 2-3 cm on each side to the width of the window. Their standard length is to the window sill, although variations below the window sill or to the floor are possible. To the length of the Roman curtain you need to add 12 cm for allowances: 2 for the seam at the top and a double hem of 5 cm at the bottom.

Attention! The curtain should not extend beyond the window opening. Remember that you need to sew a separate curtain for each window.

No special pattern is required. You just need to draw a rectangle on the pre-ironed fabric that will correspond to the parameters of the window, and also correctly mark the folds. For window openings (from 1.45 to 2.20 m) 7 folds are made.

Sewing steps: step-by-step instructions

By following the step-by-step instructions with photos, you can decorate in just a few hours. kitchen window beautiful curtains.

• From the inside of the fabric, mark the fold lines, folds and points where you decided to install rings for the cord.
• Fold the edges in at the sides twice.

• Attach with a special stapler sticky tape on the underside of the beam, which will act as a cornice.

• You can replace wooden beams with a lambrequin strip, which is easy to find in specialized stores.
• The top edge should also be processed and the rest of the adhesive tape should be sewn to it. This will make it possible to remove the curtains for washing.
• At the bottom, make a hem and a drawstring into which the weighting material will later be inserted.

Advice. Use as a weighting agent aluminum profile, which is slightly shorter than the cornice.

• Sew a finishing border on the wrong side, insert the rods and sew along the sides.

• Sew rings to the cornice to install the lifting mechanism. The step between the rings should be about 5–10 cm. This work is usually done by hand.
• After the fabric is secured with Velcro, thread the cord through the rings. Tie a knot on the bottom ring and secure it with glue. Pull the lace through all the rings. The same must be done with the remaining rings.
• Finally, bring all the cords to one side and tighten them well. Use tape to secure them in the desired position.
• Attach the beam in the required place. For example, in window opening. Remove the retaining fold. After this, the curtain will lower.

• Adjust the tension of the laces and tie them behind the last ring.
• Pass the cords through the curtain lifting handle and tie 0.5 m from the original knot.
• The Roman blind for the kitchen is ready.

Roman blinds in the kitchen: pros and cons

Roman blinds are very similar in design to roller blinds, but unlike the latter, they are not assembled from above. They fall neatly in folds. Before you decide to decorate a window with such curtains, weigh the pros and cons.

Advantages:

1. Easy to use and care for.
2. Possibility of using reflective fabric or fabric with special impregnations.
3. Fixation of curtains at any level.
4. Roman blinds fit into most styles.

Flaws:

1. There is no way to adjust the level of lighting in the room. Unlike blinds, Roman shades do not allow light to pass through.
2. The need for careful care of curtains (without using wet cleaning).

Roman blinds appeared several thousand years ago. According to some sources, they were invented by sailors. Convenient and easy to use, they still do not lose their relevance and popularity. Suitable for most interior design styles. Look great in the kitchen. They are easy to sew with your own hands. Summarizing the above, we can say that Roman blinds have much more advantages than disadvantages.

DIY Roman blinds: video

Roman curtains for the kitchen: photo

Roman style curtains are quite interesting option decorating a window opening.

Such curtains will suitably decorate any room. From this article you will learn how to make Roman blinds with your own hands.

An expressive detail of the setting

Strict, expressive curtains in the Roman style are most suitable for the kitchen.

It is best to sew such curtains from thick and strong fabric. It is not necessary to use the whole canvas; you can combine several materials. Such products will look very interesting and unusual.

A light-transmitting fabric with a floral pattern is perfect. Such curtains will pass freely Sun rays, and at the same time the room will be hidden from the prying eyes of neighbors.

If you want the curtains to shade the room, then opt for light-proof materials.

Kitchen curtains should be made from stain-resistant fabric that does not absorb odors and maintain an impeccable appearance for a long time. Also, contaminants must be easily removed from textiles. Such qualities are inherent in synthetics.

Suitable for living room plain curtains. They will be combined with many design trends.

For Provence and country, checkered textiles and fabrics with floral and berry patterns would be an excellent solution.

The nursery can be decorated with curtains with images of cartoon characters, flowers, and fruits.

Determining the size of curtains in the Roman style

Roman blinds (“Roman”) must fit strictly into window hole. Therefore, sizing should be determined very carefully. Big role The correct fastener also plays a role.

The option when the “rim” is lowered along the glass of the window is the most popular. This optimal solution for window openings with wide sill boards.

Some shoot the rim straight at the glass. This method requires sewing curtains, lambrequins and attaching a cornice.

Roman blinds can be attached to the outside of the window opening. This suitable solution, if the windows have sashes and vents, and in cases where they swing open into the room at their entire height.

The allowance at the bottom will allow you to install the rod above the window opening. In this form, the folded “rim” will not be a hindrance when opening the window.

Sewing Roman blinds

Sewing a curtain in the Roman style is not at all difficult

Note!

You will need:

• Curtain fabric;
• The tape is Velcro, its length should correspond to the width of the curtain;
• A beam (rod) with a radius of 0.2-0.25 cm and a length 3 cm less than the width of the curtain - 7-8 pcs.
• Plastic rings with a radius of 0.5-0.6 cm;
• Nylon rope - 3 pcs., two of them are twice as long as the curtain, and one is equal to the width of the curtain;
• Strips for weighting and for fastening the canvas;
• Self-tapping screws, nails, hooks with a screw leg.

Action plan

We measure the window opening. On each side we add allowances of 5-7 cm in width and 10-15 cm in length. We wash, dry and iron the selected material.

The correct number of folds is calculated using special tables. This is very important point in the manufacture of curtains.

We cut the fabric according to the Roman blind pattern. We mark the hem lines, folds and the location of the rings on the wrong side. It is better to fold the material twice on the sides.

Using nails, we nail Velcro tape to the bottom of the bar for attaching the curtains. Sew Velcro to the finished top edge of the curtain. This will allow you to remove the product. We paint the timber that acts as a cornice in a suitable shade.

Note!

Fold up the bottom of the curtain, creating a pocket for the weight strip. On the wrong side we sew a border as a trim. We thread hooks through the holes and sew them up at one edge.

Mark the location of the rings and sew them on. To fix the lifting structure, we nail the rings to a wooden beam. The rings should be placed symmetrically, and should be 50-100 mm away from the edges of the panel. We attach the curtains to the beam with Velcro tape.

We insert a rope into the rings along the entire length of the curtain. After all the ropes are inserted into the rings, we bring them out from above on one side of the curtain.

We tighten them so that the arrangement of the folds is uniform, and secure the folds with braid.

We fix the beam over window opening or to the window frame. We remove the ribbons that hold the curtain folded. After lowering the curtain, we equalize the tension of each rope.

We tie all the ropes into a knot at the outermost ring and thread them through the handle that raises the curtain. After 45-50 cm from the place of the knot, we tie another knot and cut off the excess. The curtain is ready!

Note!

"Romans" are very popular. Don't be lazy to make them - you will get a fashionable and stylish decoration for your windows.

DIY photo of Roman blinds

It is likely that Roman blinds were invented by the Romans themselves. The principle of their operation is obvious and has not changed for centuries, which is why they remain invariably popular. The design is based on a straight sheet of fabric, gathered into folds using a cord. Blinds can be designed in different styles, giving the room a strict or playful look, completely blocking the sun's rays or leaving pleasant diffused light. The obvious advantage of this decor is for self-made Roman blinds will take one day.

Roman blinds can be with or without inserts, with soft folds and with hard inserts like blinds

A useful feature of curtains that are simple in shape and design is their tight fit to the windows. At the owner's request, they almost completely match the size of the glass. This gives reliable way provide darkening of rooms of any size. The entire structure takes up minimal space, is extremely simple, almost unbreakable, and can be easily restored. The canvas is removed from the curtain rod, washed on its own, and from time to time you can get by with dry cleaning using a long-handled brush.

Modern industry produces a wide range of convenient ready-made designs for installing any blinds. With purchased roller blinds, the window design process is reduced. Curtains can also be made from scrap materials. Below is detailed instructions How to make Roman blinds with your own hands.

Of all the classic draperies, Roman curtains are the most laconic and neat, because when unfolded they are a flat sheet of fabric. They remain consistently popular in Italy. When the window is opened, the material folds in large or moderate parallel folds, allowing access to light. Draperies are created on the basis of several strips sewn inside the fabric. For installation, “Roman” cornices are also used, equipped with basic fabric lifting mechanisms. The level of drapery is fixed using a special control mechanism with a chain. In more simple version the cord supporting the folds is simply wound around a small hook in the wall near the window.

Important! Most often, woven blinds are close in size to the window area and do not cover the surrounding walls, so very little material is taken for them.

When hanging, the curtains are placed inside the window opening. There are cases when the curtain is placed outside, the curtain covers the frame itself, as well as part of the wall around it. It is possible to create an expressive ensemble without additional tricks, choosing an original texture and color. Traditionally, plain canvases are chosen. Try to come up with your own design (stripes, flowers, ornaments), apply a photo image, or a drawing you made yourself.

In the classic design, the drapery arrangement model involves 3 to 5 large folds formed at an equal distance from each other. The quantity depends on the designer’s imagination. The folds are placed at the bottom of the curtain, then when open it will be half smooth. If you do not use textile tape or rigid rods to attach the rings, the gathers will be soft and draping.

Blinds can be decorative, functional or combined. The main characteristic is the transparency of the material. Based on the degree of light transmission, materials are divided into types:

• “Blackout” is a dark material that does not transmit light. Mainly used where maximum darkness is needed, in the bedroom, home theater, children's room. The fabric is dense, often natural.

  

  Universal blackout Roman blinds chocolate color blackout fabric

• "Dymout" - semi transparent materials, but not tulle or muslin. They transmit about 30% of the light flux. Good for decoration, ideally combined with traditional curtains. Suitable for rooms where people not only relax, but also receive guests and work. Used in the dining room, living room, library, office.

  

  Dimout Roman blinds partially allow light to pass through, but at the same time do not allow the heat of the sun's rays to pass through

• Completely transparent materials - tulle, organza, tulle mesh. Can be used alone or combined with other materials. The functional load of such curtains is not great; their main task is to create a harmonious decor and a beautiful interior.

  

  Transparent Roman blinds are very popular due to the fact that they fit seamlessly into any interior.

How to sew Roman blinds with your own hands



Determining the size of a Roman blind depending on the method of fastening

The first step in making Roman blinds is measuring the window. In relation to the length and width of the glass, the size of the canvas will be larger:

• 4 cm high hem plus 15 cm allowance to insert a barbell and weighting material inside (19 cm in total);
• in width - plus 2 cm, designed to process cuts on each side (4 cm in total).



Cutting a Roman blind: fabric calculation diagram

To install blinds, prepare a rod or purchase a ready-made roller blind. A standard round cornice of small diameter will do (usually they are metal) or wooden beam with a diameter of 3 cm. Its length is less than the width of the material by the amount of hem. When using a ready-made roller shutter, you need to remember the few centimeters that are needed for the plugs - if you do not calculate them, when opening the window, the fastening will break against the wall.



Calculating the number and size of folds for a Roman blind will help you decide on the best option.

Curtain design, what components are needed for manufacturing

The design of Italian blinds remains as reliable as in the days of the ancient Romans. Innovations concern, first of all, materials and control devices. At homemade It is possible to do without blinds. The basis of the structure is a bar on which the fabric and cords that lift it are attached. The rest is details that can be used at your own discretion.

Ready-made roller blinds, which will eliminate a third of the total amount of work, are sold in construction supermarkets. They are:






Electric curtain rods can withstand heavy loads and are often used on panoramic windows




Before you start, prepare everything you need: a rod, fastening elements, scissors, a screwdriver, screws, material and Velcro tape for fabrics, Double-sided tape, rings, strips for fixing folds. If there are no strips, thick textile tape will do; you need from 3 to 6 cuts (or strips) of a length equal to the width of the finished fabric.



Elements of a Roman blind - pins and rings for the lifting cord

Prepare 2-3 cords to control the curtain, each equal to twice the length of the pattern. Weights are hung from the ends: jewelry, large beads, tassels, rings. Sometimes a special mechanism is used to tighten the cord, which rotates, winding the cord or chain. They come in two types: cord or rotary chain.

Important! Rotary-chain ones handle curtains weighing up to 7 kg, cord ones - only up to 4 kg.

Materials and care



We choose fabric for sewing Roman blinds so that they fit harmoniously into the interior

Depending on how dark it should be when the Roman blinds are closed, the material for the work is selected. Most often, various natural or artificial fabrics are considered, but there are also blinds made of paper, plastic, various plates or woven fabrics made of any sufficiently elastic material. Industrially produced materials are additionally treated with dust-repellent impregnations, antistatic agents, Teflon coating and anti-flammation compounds.

When making your own, the easiest way is to find beautiful natural fabrics:

• wool (with a small percentage of artificial additives to prevent it from matting);
• cotton, mixed fabrics with viscose;
• polyester;
• nylon.

Important! Fabrics with special impregnations used in production cannot be washed with washing machine, clean with care so as not to damage the outer coating.



An interesting pattern on the fabric is often an important decorative element of Roman blinds

It is reasonable to correlate the choice of material composition with the purpose of the room where it will be used. Natural fabrics are good for rooms where children live or people relax. Synthetic options are suitable for the kitchen, bathroom, passage rooms - veranda, loggia, corridor, if it has a window or it is necessary to close the niche with something. The design is selected using the same principle.

Natural materials without additional impregnation are washed according to normal rules. Machine washable if the fabric does not shrink (there are no strips inside). Curtains with complex weaving, patterns, and trims are washed by hand and then very carefully wrung out. Dry straightened, immediately hanging them in their proper place. To remove creases, carefully iron the fabric, but it is better to use a special steamer.

Step-by-step instructions for beginners on how to make a Roman blind with your own hands

The first stage of work on the production of Italian blinds is the selection of material, the preparation of everything necessary according to the above list. Remember that the instructions recommend making Roman blinds with your own hands from scrap materials.



Materials and tools for making Roman blinds

The second stage is measuring the window, drawing up a pattern, cutting out the material. If slats are used, then each curtain is cut from two equal panels, if textile tape is cut from one. If the fabric has a pattern, pay attention to how it is positioned.



Fabric marking, pattern with allowances and sewing diagram

The third stage is sewing. The peculiarity of Roman blinds is that along the entire length of the fabric it is necessary to fasten strips, which, with the help of rings and cords sewn to them, will create folds, holding the fabric raised.



We mark the folds of our curtains, baste and stitch

The option of two panels is folded with the front side outward, “pockets” for the slats are adjusted, the distance between them is 1/4, 2/4, ¾ of the height. Afterwards, the edges are hemmed, a drawstring is made at the bottom for the weighting material, and at the top there is a wide hem for the cornice.



In order to make the curtain heavier, we insert a special bar into the gate



Smoothing the folded edges

If the fabric remains single, then a textile tape is sewn on the back side (according to the same pattern as above for the pockets for the strips). Rings are sewn to the ribbon under the cords along the edges or 10 cm from the edge, as well as in the middle. If the curtain is attached with Velcro tape, then it is adjusted along the top edge.



We fix the Velcro tape on the cornice



Sew the second Velcro onto the top back of the curtain and secure it to the curtain rod

Important: if the fabric is not very thick, then the edges can be folded and secured with an iron, placing sewing adhesive tape along the fold.

The fourth stage is the installation of roller blinds or cornices. The finished roller blind can be glued to the frame with mounting tape. On a homemade wooden plank, first fasten one side of the Velcro tape and rings for the cords, then install them with self-tapping screws.



Place the plastic rings from the inside out and sew them on by hand

Fifth stage - the cords are pulled, the curtains are hung on Velcro tape. It is simply attached to the finished roller shutter according to the instructions (for different manufacturers they may vary according to design).



When all the cords are threaded, we pass them through the upper fastening rings to one side

Important: on the side where the end of the cord that lifts the canvas is brought out, it is worth attaching a hook on the wall to which this control element will be attached.



Simple DIY Roman blind

Roman blinds are made of dense heavy materials, especially when large size, it is best to hang it on a roller blind industrial production with electric drive system. It will cost more, but it will last longer, and using such blinds is more convenient. The mechanism can be opened and closed remotely.

DIY Roman blinds for the kitchen

One of the most popular places to use Roman blinds is the kitchen. Thus, the window sill is freed up and turns into an additional working space or place where they are located decorative plates, vase or something else. Short blinds in the window opening get dirty less and do not accumulate dust. They are easy to refresh with a brush. Teflon-coated materials are very good here, but they are not easy to find on sale. The easiest way to do this is through an online store.

Important! When purchasing materials with special impregnations, ask the seller if they have a hygiene certificate.

Thick, opaque curtains are not needed in the kitchen; light and translucent ones take root here more often. They make the room visually more spacious and rich in air. There is no need to create a good darkening in the kitchen, so they use light shades, mesh in combination with finishing, nonwovens. They come in three degrees of transparency:

• transparent up to 80-90%;
• translucent;
• about 70% dimming.

It is in the kitchen that designers like to use curtains with photo prints or large drawings. The choice of topics is wide: from classic checks and stripes, to real photographs of vegetables, fruits, dishes or reproductions of picturesque still lifes.

Scheme of how a Roman blind works, design details with photos for beginners

Roman blinds work in the same way as yacht sails. They are pulled up using “rigging” - ribbons, chains or cords. When the length of the tape is selected, the fabric is gathered into folds, the even shape of which is given by rigid strips sewn at an equal distance from each other. When the tape is free, the matter completely covers the window.

Roman shades lack what distinguishes them from more modern roller blinds: side rails. These elements would prevent the fabric from bunching up. However, if it is very thin, then the side seams are reinforced with ordinary textile tape.

If you do not use slats or rigid textile tape when making blinds yourself, the folds will turn out to be cascading, soft and plastic. Then the arrangement of the rings through which the ribbons pass to lift the curtain will change. They are not sewn along the edges of the fabric, but closer to the middle, so that the folds are more interesting.

Please note: a Roman blind never opens a window completely.



Roman blind pattern with measurements

For those who have decided to make Roman blinds on their own for the first time, the main recommendation is to boldly take on the job without fear. Request “do-it-yourself Roman blinds step-by-step instruction» will give you a lot of advice on this topic. It’s worth choosing the most understandable design; first, purchase a ready-made roller blind. She's being glued assembly adhesive or tape to the frame, saving yourself a lot of work.



Fabric cutting diagram for Roman blinds

Important! You should choose the simplest materials that are already familiar, so that in the future you don’t have to think long about how to clean them.

Remember that it is better to remove stains on fabric immediately, without allowing them to be absorbed and dry - then washing will become much easier. Also, you shouldn’t buy expensive fabric for your first experience. Over time, inevitable flaws will become noticeable, and you will want to do it all over again. Prepare in advance to part with your first prototype without regrets.

When cutting fabric, make sure that it does not warp. Check the direction of the base - if you cut out a rectangle on a bias, the canvas will hang askew, even if you carefully observe all the right angles. The easiest way is to make curtains from paper - the costs are minimal, there is less work, then very soon you can replace them with something more interesting without regret. In this case, the fastening mechanism is retained for further use.

Conclusion

Roman blinds are very simple, they are created by hand, but require care and attention. They last a long time, are easy to care for, but at the same time they are easy and quick to replace. This great option for those who like to frequently make small but pleasant interior changes.

Video: DIY Roman blind

This step by step guide with photos will help you sew classic Roman blinds with your own hands.

This master class describes in detail a method in which not a single stitch of stitching will be visible on the front side of the curtain. This will give the product a neat look and will look like the work of a real professional.

In addition, you do not risk ruining your curtain with uneven stitching, which happens quite often.

Of course the volume self made and the time spent will be a little longer, but the result is worth it.

What you will need:

• a piece of fabric for the front side (thick material is best);
• a piece of fabric for the lining (it is best to use white chintz);
• needle;
• threads;
• ruler;
• scissors;
• pencil or special fabric marker;
• sewing machine;
• (traditional wooden or finished mechanism);
• rods for the frame and weighting material.

Step 1. Take measurements

First of all, you need to measure the window and calculate the dimensions.

You need to decide exactly how the curtain will be placed: inside the window opening or outside.

Inside the opening

If you chose the first option, then the height of the curtain is measured from the top slope of the window to the window sill.

To calculate the exact width, you need to measure the window opening in three places, as it may be uneven. The smallest value obtained should be taken as a basis and subtract another 2 cm from it so that the curtain passes easily and does not rub against the slope.

Outside the opening

In the second case, to determine the height of the curtain, you need to decide at what level from the window niche the cornice will be located. Mark the top mounting point for the curtain rod and measure down to the window sill. This will give you the final height.

There are two ways to get the width:

• take the width of the window sill as a basis
• or measure the width of the window opening and add 12 cm to it.

Select either of these two measurement options to get the width of your curtain.

Step 2. Count the number and height of folds

Now that you have the height and width of the future curtain, you can make all the calculations.

Usually they make from 5 to 9 folds depending on the height of the curtain. But if necessary, you can make any odd number.

Calculation example:

Curtain height: 124 cm
Top margin: 5 cm

Amount of fabric for folds: 124 - 5=119 cm

• divide by 3: 119: 3 = 39.6 cm
• divide by 5: 119: 5 = 23.8 cm
• divide by 7: 119: 7 = 17 cm
• divide by 9: 119: 9 = 13.2 cm

From the calculation it can be seen that 7 sections of 17 cm each will look best.

For 7 sections you will need 3 rods.

Step 3. Calculate the amount of fabric for the front side

Length of fabric for right side = length ready-made curtains+ 5 cm for a turn-up at the top + 9 cm for a turn-up at the bottom.

Step 4. Calculate the amount of fabric for the lining

The cutting width of the lining material will be equal to the width of the finished curtain. This is due to the fact that when the curtain is ready, the width of the lining, taking into account the folds along the edges, will be slightly narrower. Therefore, there is no need to add additional centimeters.

The length of the lining is calculated taking into account the pockets for twigs and hems at the top and bottom.

Lining length = finished curtain length + 2 cm for hem at top + 2 cm for hem at bottom + 2.5 cm for each pocket for twigs.

For example, if you should have 3 twigs, then you will need to add 7.5 cm.

Step 5: Preparing the Lining

Cut the lining fabric to size and iron it well.

Then measure 2 cm on each side, fold them inward and iron the hems.

Use a ruler to measure where the twig pockets should be. From this line, step back 1.25 cm (half of 2.5 cm) and draw a second one. Along this line you will need to make a stitch to form a pocket.

Fold the fabric along the line where you want the pocket to be. Sew the lining along the second line. This way you should have a pocket for the twig. Repeat with the remaining pockets.

Step 6: Preparing the Front Side

Cut the fabric to size for the front side and iron well. Fold 5 cm on the sides and top, and 9 cm on the bottom. Iron the folds.

Step 7. Sew on Velcro tape

To ensure that the curtain can be easily removed from the curtain rod, a special textile Velcro tape is used.

Sew the ribbon to the right side of the fabric just above the fold line.

Step 8. Connect the lining to the front side

Place the lining on top of the facing fabric. The lining should extend 2 cm on the sides from the edges. Secure the fabric with pins. Check with a ruler whether the pocket spots match the front side.

Fold the bottom part of the facing fabric in half to form a pocket for the weighting material. Cover the resulting pocket with a lining on top.

Hand sew the lining to the facing fabric using a hidden seam.

Sweep the corners, but so that there is room for inserting the weighting agent.

The lining in the corner should not be completely sewn. This will make it possible to insert and remove the weighting material.

Fold over the top part with Velcro and sew it also using a hidden seam.

Step 9. Sew on the rings

The rings should be located at a distance of 10 cm from the edges of the curtain and evenly across the entire width with an interval of 30 to 40 cm. If you are using a ready-made kit with a curtain rod, then make the number of rings in accordance with it.

Measure using a ruler and mark the places where the rings should be attached.

Then sew the lining and facing together with a few stitches where the rings should be attached, as well as at the point halfway between them and at the edges.

Insert the twigs into the pockets.

Sew the rings according to the marks.

Step 10. Thread the cords and install the cornice

Hang the curtain rod on the window. Then use masking tape to hang the curtain on the curtain rod.

Thread the cords through the rings and secure them at the ends with clips or simply tie them in knots.

To make the process clearer, we also offer you a video with instructions on how to sew a Roman blind with your own hands.

Reading time ≈ 12 minutes

Roman curtains - great option for window decoration and space design - just below you can find step-by-step instructions on how to make Roman blinds with your own hands (with photos) for beginners, as well as for experienced craftsmen. Making it yourself allows you not only to save money (sometimes the prices for decorative elements in construction and other stores are simply off the charts), but also to be confident in the quality of the materials used and the appropriate size. Moreover, this will allow beginning seamstresses to practice and try to do something new and useful.

The idea of ​​such curtains was borrowed from sailors of the Roman Empire, which is where they got their name. Such curtains embodied the main elements of a ship and an army - practicality and functionality. Roman blinds require minimum costs fabric - the size of the required curtain square is made up of the size of the window itself and a small amount of material for the seams; no draperies are needed. Thus, when folded, the curtain will take up little space, and when unfolded, you can enjoy the beauty of the fabric if you choose the option you like.

What are they?

There are several types of Roman blinds. The mechanism of their operation is the same, the only difference is appearance when placed on windows, and creation features.

If desired, you can place several types of such curtains on your home windows at once. But be careful! You should not combine several types in one room, as well as pile up curtains wherever you want. A Roman blind should only emphasize the interior and fit into it laconically, and not occupy the entire space.

Fabric selection

Before you start sewing, you should wisely choose the main hero of the occasion - the fabric for the curtains. Before going to a sewing or construction store, we advise you to decide exactly what you want to achieve from placing such a curtain.

1. Light transmittance

   Its light absorption depends on the thickness, material, and other parameters of the fabric. The lightest and most “airy” materials like satin can transmit light almost completely ( White color) or perform only the function of protection against prying eyes(more contrasting colors). Medium thickness fabrics are a compromise between full light penetration and full protection Moreover, with the right choice of fabric color, your curtains will fill the room with a pleasant dim light.

   

   An example of using translucent red curtains in Japanese interior. When light passes through them, the room will be filled with a beautiful reddish light.

   The thickest curtains allow you to almost completely eliminate the ingress sunlight through the fabric. However, due to the characteristics of the Roman blind (loose fit to the window), it will not be possible to ensure complete “tightness” from light during the day - the light will break through the cracks. If you are ready to spend money on sun protection, ask the store consultant if they have fabrics with a special light-absorbing coating. Curtains made from such fabrics provide their owner with sun protection along their entire perimeter.

   

   Almost no light passes through them.

2. Color

   The color that you use when sewing curtains on the window should be harmoniously combined with the interior of the room. If you have the same style in your room, choosing a fabric will not be difficult, just determine a number of harmonizing colors and buy one or several pieces. However, a room with such a design - perfect option, often each room is individual and unique, and it is important to spoil a bright atmosphere (for example, in a children’s room) with dull colors, and a more restrained one (for example, in a hall) with too bright ones.

   

   An example of what not to do. The curtains were made before the apartment was furnished. Thus, you will have to select all the furniture to match the curtains. It is much easier to select curtains to match the rest of the interior.

   If you want to use the living room, dining room (the place where you spend the most time), it is worth considering that colors affect your mood. Green and blue colors are calming, yellow is cheerful and invigorating, and black or red can cause anxiety. But these rules are not universal, and if you are furnishing a bedroom for a child or husband/wife, it will be much easier to ask them personally what color they like.

   

   An example of a good and concise choice. A piece of black fabric and a small strip of red fabric - and now the curtain fits perfectly into the interior!

3. Other

   It is necessary to measure the size of your windows before you go to the store. It is better to take fabric with a reserve - even when measuring a window with a laser tape measure, there is a certain error. There is also a possibility of sewing errors. In some cases, a damaged piece of fabric may remain unsuitable for curtains, and there will be no other piece of fabric left at hand. And don’t forget about the reliability of the fabric - if you plan to hang curtains on a two-meter balcony door, it is better to be sure that the selected fabric will withstand such a load.

   

   An example of a creative combination - classic curtains and Roman blinds.

   Despite the fact that Roman blinds do not tolerate redundancy in their design, a few decorative strips along the edges will not harm them. The main thing is to correctly combine the colors of decorative elements and the main body. If you don’t know how correctly the colors have been chosen, consult the seller or take a look at color circle. It allows you to easily and quickly determine the combination of certain colors and shades.

   

Creation

After choosing the fabric and basic preparation, it's time to get to work. Our master class or step-by-step instructions (with photos for beginners) will help you make Roman blinds with your own hands - the main thing is to follow the instructions and double-check everything if you are not sure about something.

1. Let's prepare the lining fabric. We will draw a sketch of our product on it (it will serve as a pattern). It also serves as a “stabilizer” - in our case, we use light satin fabric that can easily fly away or slide on any other surface. If we use a hard lining fabric, this will not happen.
   
2. We prepare the main canvas and decorative elements. Our main canvas has a width of approximately 1.5 m, and to reach the edges of the window, it will not be enough for about 17 (7-8 cm from each edge). To eliminate this problem, we have also prepared light satin ribbons of blue color 8 cm wide. In addition technical solution, they will also perform a decorative function.
   
3. We begin to draw (mark the lines of seams and folds on the lining). We take the top of the canvas and mark on it the space for seam allowances (in our case, 5 cm). At a distance of 5 cm from the edge of the allowance line from them we will sew the first tape for the drawstring.
   
   
4. From the seam line we set aside the distance of the fold (in our case 22 cm) and mark the second line of the drawstring.
   
5. In this way, we measure out a certain number of folds, depending on the length of your curtain and the size of the window. We have seven of them.
   
6. The distance from the last fold to the edge (the seam allowance on the bottom side) should be equal to the distance of the seam allowance on the top side. In our case - 5 cm.
   
7. On one side of the lining (where there is no carved edge) we added one centimeter for seam allowances.
   
8. We bend them and fix them with a hot iron. The use of steam is not recommended (depending on the fabric, unpleasant transformations may occur with it)
   
   

   If you are not confident in your fabric, we recommend ironing it through a layer of thin fabric and using the iron at minimum power. This will take more time, but you definitely won’t ruin the material.

9. We slightly burn the edges of the decorative ribbons.
   
10. Sew decorative ribbons to the side of the lining fabric.
    
    

    In our case, we use light and thin fabric, and machine stitching can tighten the fabric. To avoid this, we recommend placing cut sheets of cardboard under the fabric. Thinner materials ( standard sheet A4, magazines) will not work - they will curl and the desired effect will not be achieved. After all the work is completed, the cardboard is simply torn off from the reverse side.

11. We place the edge of the main fabric on the edge of our decorative tape and attach it to the lining. We repeat the steps on the opposite side.
    
12. We wrap the edge of the curtains. First, make a 2.5 cm fold from the edge and iron it. Then we wrap it again and iron it again. Thus, we use the 5 cm that we allocated for seams.
    
13. We start the stitching not from the very edge (where we sewed decorative ribbons), but from the junction of the ribbons and the main fabric. We sew to the junction on the other side.
    
14. When we reach the junction, change the color of the thread from blue to blue. Sew along two edges.
    
15. Along the way, it was decided to sew two more decorative ribbons on the front side of the product - at a distance of 30 cm from each edge. First, we attach the ribbons with any available materials, and then stitch them, leaving some part hanging freely.
    
16. We begin to sew on the drawstrings for the slats. Turn the panel over with the wrong side up. Hemmed ones curtain tapes“we take away” the laces. Apply the top edge of the tape to the line for the first drawstring at a distance of 1 cm from the side of the curtain. We pin it with pins along the entire length. For drawstrings, you can use any braid instead of curtain ribbons - even satin ribbons.
    
17. First, we sew the ribbons between the side inserts (made of blue satin ribbons). The lower thread of the machine is blue - to match the color of the main fabric. Having sewn all 7 ribbons on one edge, change the thread to blue and sew the ribbons on the other side. The photo below is a view from the wrong side after you have sewn all 7 ribbons.
    
18. We sew the soft part of the adhesive tape to the upper edge of the curtain from the wrong side.
    
19. Let's move on to additional decor. At the bottom of the curtain (on the wrong side) we sew two curtain tapes. First, we pin them at a distance of 31 cm from the sides, this time we do not pull out the laces.
    
20. The top of the braid should reach the bottom drawstring - just opposite the place to which the silver braid was sewn on the front side. We sew the braid on both sides.
    
21. You can sew fringe to the bottom edge of the curtain.
    
22. We begin to manually sew the rings to the drawstrings. We took ordinary plastic rings from linen accessories (diameter about 1 cm). You can use steel rings - but it will cost much more. There will be 3 rows of rings on the curtain: 2 outer ones (3 cm from the sides) and one in the center.
    
23. At this stage, you can insert slats into the drawstrings. For us, the role of slats is played by window beads (pre-sanded, if required). They can be replaced with bamboo sticks, or special plastic slats, but simple pieces of wood are in no way inferior to the other option, and will cost less. In case of self-production, please note that the diameter of the bead should be 1.5-2 times less than the diameter of the drawstring. The length of the stick should also be a few centimeters shorter than the width of your curtain.
    

    The best option will sew on the rings after you insert the slats. Then there will be no risk of making holes in the entire canvas.

24. Are all the rings in place? Then we begin to thread the laces or ribbons. We start threading it from the top and tie it on the lowest ring. A total of 3 laces are needed.
    
25. Next, we secure the threads of the curtain tapes at the bottom of the curtain with a knot and tighten them tightly.
    
26. We secure the folds with special fasteners. They allow you to adjust the screed and choose the decor to suit your taste.
    
27. Pin the ends of the ribbons to the fringe. We are counting on further washing of the curtains - so we will not cut the threads of the ribbons, but simply tie them and hide them.
    
28. We create a cornice. To do this, take a wooden beam slightly longer than the width of the curtain. The best option would be to decorate it with fabric. For this we took the remains of our main material.
    
29. We apply adhesive material to the wide edge of one of the sides. We use hot melt glue, but it can be replaced with any other glue - then you will have the opportunity to correct the position of the upholstery during gluing.
    
30. On the other side, we fold the edges and fasten them with a stapler. You can also glue them together. At the ends of the beam, we also fold the fabric and secure it in any convenient way.
    
31. We place the cornice on the top of the curtain exactly as it will be located later. Below we mark the location of the laces.
    We take self-tapping hooks. First, we close them into a ring with pliers and screw all the screws into the marked points + an additional screw on the side where all the cords will be brought out.
    
32. We glue the remaining part of the adhesive tape to the front side.
    
33. We attach the curtain rod to the curtain using adhesive tape.
    
34. We pass the first cord through the first hook and pull it towards the second hook. We take the first cord in a bundle with the second, insert it into the hole and direct them to the third hook. There we attach the third cord to the bundle and thread it through the third hook. Don't forget to adjust the tension! We tie a knot and braid the rest of the length in a convenient way.
    
35. We screw the fasteners onto the cornice and hang the structure on nails, self-tapping screws, screws, etc.
    
36. To fix the curtains in the raised state, we will need a hook on the windowsill or below. Simply screw the hook into any convenient place and twist the cord around it if you need to fix it.
    
37. Let's check. Ready!
    

Did you like our step-by-step instructions? Add our site to your bookmarks! We have a huge amount of videos, photos and other materials to help you arrange your interior and make repairs quickly and easily! You can also watch a master class on creating Roman blinds of a different format just below.