≡× MENU

• Repair
• Repair 
• Interior Design
• About everything
• About plumbing

Beautiful DIY lamp. DIY lamps from scrap materials - ideas and instructions. New Year's decor on a chandelier

Materials

The most suitable and accessible materials are paper and textile. They are easy to transform, each of us is familiar with them and can be found in everyone. home. Wonderful lamps are also obtained from threads or yarn. Naturally, glass can also be used for lampshades. At home, these are ordinary or unusual, with an interesting shape, jars or bottles. Particularly daring projects include plastic containers, coffee packaging, and plastic children's toys.

In addition, do not discard options such as rattan, bamboo and rubber. Both raw materials and a finished product can serve as the basis for a future product. For example, designers have become adept at creating delightful lampshades from beads, globes, parts of sets, mirror shards and even crumpled sheets of music! You just have to take a closer look at the objects around you...

Understanding how difficult it is to move from thought to action, especially to see an exquisite accessory in an ordinary jar, we have prepared several master classes for you. By following the step-by-step instructions, you can easily make some sweet hand-made new things for any room in the house.

Ideas and their implementation

Since we have already mentioned the materials suitable for making lampshades and lampshades, let’s start with paper.

Lamp with butterflies

For work we will need:

• white thin cardboard
• thin twine or fishing line
• glue gun
• wire for frame
• utility knife or scissors
• round pliers

Advice! Before you start work, decide on the dimensions of the finished lampshade. In our example, the diameter is 30 cm, which means we need a piece of cardboard 90 cm long.

1. We make a frame. Cut a piece of wire 96-98 cm long. Roll the wire into a circle with a diameter of 30 cm and secure the ends with pliers.
2. We cut 3 hanging elements from twine or fishing line. We measure the length of the pieces based on the height at which you plan to hang the lamp. We tie them to the wire in three places, evenly distributing the load.
3. Draw butterflies on cardboard different sizes and cut them out.
4. We fold the cardboard, glue the joint with a strip of thick paper or staple it with a stapler.
5. We fix the upper part on the wire. For this you can use both glue and thin wire.
6. The places of joints and cuts can be decorated with butterflies remaining after cutting.
   Look what an elegant lamp we have created. It will fit perfectly into both a children's room and a bedroom. You will see a special chic when you turn on the lamp and butterflies flutter along the walls.

Advice! Instead of butterflies, you can cut out snowflakes, stars or flowers. Decide for yourself what you like best.

60s style

If you ask our grandmothers, they will certainly remember floor lamps with lampshades in the form of an inverted bucket, tied with colored threads. We can do exactly the same thing with our own hands.

We will need:

• frame for lampshade – 2 pcs.
• decorative braid (3 colors, choose a combination to your liking)
• scissors
• crochet hook

Let's start manufacturing.

• We tie the first braid to the lower ring of the lampshade, leaving a tail of at least 5 cm.

• Pull it onto the top ring from the outside, throw it over it and pull it through inner side bottom ring. We alternate actions until the next sector of the frame begins.

• We fasten the first braid and take a braid of a different color to work. We knit it to the next sector, not forgetting to leave a tail on the first knot.

• We do the same with the third sector, filling it with the remaining braid.

• We stretch the tails along the bottom of the lampshade using a crochet hook.

Now our lampshade from the distant 60s is ready, all that remains is to insert the socket and assemble the chandelier in any order.

Fringed braid

Another one original idea for a lampshade with your own hands, it is also connected with braid, but not single-layer, but with fringe. What do we need for this?

Prepare:

1. two metal hoops or an embroidery hoop
2. fringed braid
3. fishing line
4. acrylic paint, the same color as the braid
5. glue gun
6. scissors

Advice! Fringed braid can be purchased in stores that sell decor for curtains and furniture.

1. We paint hoops or hoops acrylic paint. If they are already covered with varnish or other paint, it is better to sand and clean them.
2. We wait until the paint is completely dry and make three marks on each ring of the lampshade, placing them at an equal distance from each other.
3. I cut three identical pieces of fishing line.
4. We tie them to the smaller ring of the lampshade, leaving the upper ends with a margin so that we can then tie them to the lamp cord.
5. We measure the length of the fringe, subtract 2 cm from it, and tie the fishing line to the second ring using the resulting length. This way we can get a cascade.
6. Heat the glue gun and carefully glue the braid along the bottom ring.
7. We do the same with the upper ring, pulling it out from the lower one.

Advice! Please note that the hot glue may melt the line, so be careful not to apply it directly to the line. Drop glue onto the paper, let it cool a little, and then apply it to the fishing line.

When starting to arrange the interior space, it is important to think through every little detail. After all, we all subconsciously strive for comfort and it is the smallest details that can create a special atmosphere, convey the general idea, mood and character of the room. Professional designers claim, and the interiors clearly prove that right choice Chandeliers can not only decorate the interior of a room, but also make life brighter and more fun. The lamps give special grace and gloss beautiful lampshades for chandeliers with original design. You can find out how to make them yourself and what materials are best to use for this in this article. Detailed, step-by-step master class, and visual photo, will be an excellent help for you in this exciting process.

Material selection

When making a chandelier, it is difficult to single out one material that would meet all the requirements. Each of them has its own individual characteristics and features. For example, paper, which is the simplest and available material, lends itself well to transformation.

Lamps made from glass shards and strips of metal have a dazzling shine and beautiful appearance. Wood and fabric add warmth and comfort to the interior. Lace lampshades are distinguished by their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart and use your imagination in time.

A chandelier made of paper napkins is a rather bold, but justified experiment.

We will describe in detail how in an ordinary object you can discern its creative potential to create an exclusive decorative element in this article.

Step-by-step instructions, with a description of each step, will help you make from available materials incredibly beautiful and unique lamps that will be an excellent addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many people are interested in how to properly make a chandelier in and other rooms. After all, you want this element of the interior to be not only beautiful, but also functional.

On the one hand, the chandelier is lighting fixture, capable of providing the proper level of lighting in the apartment. After all, a lot depends on the choice of light in the room, including eye safety. On the other hand, I want ceiling structure complemented the interior design, creating a special atmosphere of warmth and comfort.

When making a chandelier, first of all you need to take into account the height of the ceiling. For example, for low people a chandelier with a bar mount is suitable. So, the ceiling will look visually higher. If the ceilings are high - 3 m and above, then it is better to make your choice in favor pendant lamp with hook fastening.

Lamp selection

For any room you need to take an individual approach to the intensity of its lighting.

For a small bathroom you will need 80-100 W.
Kitchens require a lamp power of at least 120-150 W.
The living room and hall cannot do without light bulbs in the range of 150-300 W.

The number and power of lamps is calculated based on established standards - 20 W are required per 1 m². electricity. It is also necessary to take into account the parameters of the room, its dimensions and reflective properties.

Designer Edison lamps - look beautiful and unusual

Design of the lampshade

The appearance, decor and design of the lampshade occupies an important place in the design of a chandelier. It is selected to match the interior of the room, depending on the style. Crystal for classics, metal and glass for, wood fits perfectly into country or chalet style, fabric and silk are perfect suits the style Provence

To illuminate a room on several levels, you can additionally make wall sconces or floor lamps.

Step-by-step master class on making

To make a beautiful ceiling decoration, you don't have to start from scratch. Look around, you probably have something in your house that you haven’t used for a long time. And who knows, maybe it will become the main item in the manufacture of the original lamp. Moreover, there are now more than enough ideas and inspiration for creativity on the Internet.

Important! The best place to start searching for the things you need is in the kitchen or balcony. It is there that we store all sorts of rubbish that we once needed so much and which, as often happens, is so difficult to part with later.

Spectacular chandelier made from mugs

No matter how strange it may sound, it is from dishes and other kitchen utensils that the most unusual and interesting models lamps. For example, tea mugs are an ideal material to make a spectacular lamp.

For work we will need:

• Mugs
• Saucers
• Drill
• Porcelain drill with special hole

We make it quickly and easily

1. In the bottom of the mug, use a drill to make a small hole for the wire, attach the electric cartridge and bring the wire out. It is advisable to seal the hole with a plaster mixture.
2. Next, you need to glue the mug to the saucer, where there should also be a hole, insert a light bulb and hang the newly made lamp in the right place.

As you can see the original and fashion design can be obtained from completely ordinary items.

Mesmerizing yarn chandelier

Since this is quite a simple product, to make it we need a minimum of things, namely:

• Wire with a cross section of 4-5 mm.
• Wire cutters
• Thin thread
• Multi-colored yarn

Manufacturing instructions:

1. A ring is made from wire, the diameter of which will correspond to the future size of our chandelier. To get a perfectly even circle, it can be wound on some object that has a cylindrical shape.
2. We bite off the excess wire with wire cutters, leaving a reserve of 2-3 cm on each side. We tie the ends with a thin thread.
3. All that remains is to decorate our chandelier beautifully and brightly. To do this, we cut the yarn threads so that the length of each segment is twice the height of the lampshade.
4. One by one, we tie the resulting strings onto a knot until we hang them all over the ring. From the same yarn we make a fastening for the hook.

This lampshade can be used both as a chandelier and as a decorative element decorating the interior of the room.

By combining the skills of macrame and papier-mâché you can get a stylish chandelier for the bedroom

Important! To make such a lamp, instead of wool yarn, you can use any other thread. The main thing is that it harmoniously fits into your interior.

Unusual lamp made from a teapot

You will learn how to make a chandelier from an ordinary teapot yourself in this master class. Here's what we need for this handmade masterpiece:

• Kettle
• The wire
• Electrochuck
• Metal chain

Step-by-step manufacturing guide

1. First of all, the lower part of the teapot is cut out. This is done in such a way that the resulting cutting edge is not sharp, otherwise you could get hurt on it.
2. Next, an electric cartridge is fixed to the lid of the kettle, the wire of which is led out through a small hole drilled at the top.
3. A chain is attached to the handle of the kettle, and a wire is threaded through the links. The lamp is ready.

Let's breathe new life into bottles

Glass bottles, especially if they have beautiful shapes, can be used to make a wonderful chandelier. Required material:

• Thin rope
• Flammable liquid (alcohol or gasoline)
• Glass bottles (preferably colored)
• Edison lamps (having a beautiful spiral)
• Wire and electric cartridge

Do it yourself

1. We wrap a rope around the bottom of the bottle, after wetting it in a flammable liquid. Then we set it on fire and let it burst, and we begin to slowly rotate the bottle around its axis until the rope burns out completely. After this, we lower the bottle into a container with cold water, wrap it with a towel and, applying little effort, break off the bottom.
2. To ensure that the cutting edge is not sharp, it must be sanded. To do this, it will be enough to swirl the bottle in sand or fine gravel for a couple of minutes.
3. All that remains is to mount the electric socket correctly, stick the wire through the neck, and screw in the light bulb. From the remaining bottles, the remaining lampshades are made in a similar way.

This chandelier will fit perfectly into any interior, especially if you hang it above the bar counter.

Decor from cans

Lamps made from cans are no less beautiful. They are made in the same way as from bottles. The only difference is that the bottom of the jar does not need to be cut off, since clear glass is usually used for lampshades.

We need:

• Beautiful thick-walled jars (preferably with a relief pattern)
• Hammer and nails
• Wire, electric socket
• Spray paint
• Edison lamp

How to do it right

1. To begin with, using a nail and a hammer, holes are punched in a circle in the lid, after which inner part gently squeezed out. The diameter of the circle must correspond to the diameter of the base in the cartridge.
2. We insert the cartridge into the cover and mount the wire.
3. Next, we paint the lid together with the cartridge in the color of our choice. Metallic paint with a golden shimmer will look best.
4. All that remains is to screw in the light bulb, close the lid and install the lamp in its proper place.

We all know what a globe is, but not everyone knows what amazing things can be made from it. For example, a cute lampshade for a chandelier that will fit perfectly into the interior of a children's room.

Here's everything we need:

• globe
• Bulb
• Electric chuck with holding element

Step-by-step master class

1. Usually the globe structure is not solid, so in order for us to get required element, it is necessary to divide it into equal two parts (hemispheres).
2. Next, at the top point of the hemisphere, you need to make a hole for the cartridge. For this, it is best to use a drill with a crown.
3. The electric cartridge is installed in place and securely fixed by the retaining element. Congratulations, your chandelier is ready!

Hanging structure made of horns

Making a unique lighting device from deer antlers is quite simple, the main thing is to have the necessary material on hand.

Such designs are famous for their special sophisticated appearance and are best suited for rooms with high ceilings. Such chandeliers are used in many interiors, but they look especially attractive in country, chalet or rustic style.

As a rule, the lampshades of such chandeliers have various shapes, and only natural materials are used for their production.

We will need:

• Antler
• Rope
• Copper wire
• Electrical socket and wire
• Bulb

Make a chandelier like this

1. Observing the safety rules, we connect the wire to the electric cartridge according to the diagram.
2. Next, the wire needs to be beautifully wrapped with decorative rope. For better fixation, you can use universal transparent glue.
3. By using copper wire, in the lower part of the resulting rope, horns are attached, placing them 2 cm above the cartridge.
4. We repeat a similar procedure with the remaining lampshades, later combining them into a single composition.

Ideas for making beautiful lamps (photo, video)

We hope that useful tips and the photos presented in the article will help you not only make beautiful lampshades for chandeliers with your own hands, but also save your family budget.

Lighting fixtures can not only dispel the darkness, but also give an unusual aura to your interior.

There are many different ideas with which you can make a wall lamp or any other type of lamp with your own hands.

You yourself are capable of creating a masterpiece that cannot be found in any store.

Creating an extravagant chandelier

Very original item It is made from the simplest materials, most of which can be saved after a picnic. Lamps from various containers will look impressive.

To do this you will need:

• oval plastic bottle with a capacity of 5 liters;
• disposable spoons;
• cable with socket and plug;
• low power LED lamp;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

To avoid fire, use only LED bulbs!

Use a knife to carefully cut the bottom of the bottle, then remove the handles from all plastic spoons. Apply a small amount of hot glue from a gun to the cut area and glue them to the bottom of the container.

Approximately you will need about seventeen pieces. Place the next and remaining rows in a checkerboard pattern.

In order to hide the neck of the bottle, place ten to twelve spoons without handles on the glue so that they form a ring.

Pull the socket with the lamp and cable through the hole at the bottom of the bottle.

If you don’t want to make this part yourself, you can purchase it in any department of household goods - the wire, socket and plug are already connected together.

Make a hole in the lid for the cord by drilling it with a drill or a hot self-tapping screw. Screw on the lid and place the previously prepared ring of spoons on top. Exclusive LED lamp ready for use.

Some ideas for creating lampshades

It’s enough to simply create a lamp from scrap materials for your home or garden.

Idea N1

• any hollow container (this could be old saucepan or flower pot);
• wire;
• polyurethane foam and gloves;
• paint and brush;
• sharp knife;
• pliers.

Place the item taken as a basis upside down. Wind the wire around the product the way you want the lampshade to look, since all the turns copy its shape. Put on gloves and squeeze the foam onto the frame a little at a time until it completely covers the wire, leave to dry.

Then, using a knife, give the contours more evenness and paint them in any color. This option will be the best for a street lamp.

Idea N2 is a classic

• thick wire;
• pliers;
• small bottle of water.

Note!

To make the top central element, wind a coil of wire onto the bottle, then remove it and trim off the excess. The ends must be secured so that they form a ring, the diameter of which should allow the cartridge to pass through at the bottom, and prevent it from coming out at the top.

Next, you need to make a large outer ring from the wire. To secure it you will need four equal pieces of wire. Connect one edge of each to the small ring, and the other to the large ring. The upper part of the lamp is ready.

The largest will be the bottom circle of wire; it must be attached to the second top one, evenly placing five identical pieces of wire.

To decorate the frame, thread a wire through the second top ring, giving it a wavy shape, and wind it onto the base. Decorate the bottom ring in the same way.

Note!

When walking through the forest, take with you an interestingly shaped branch; it will make an excellent wooden lamp. Wash the branch and remove the bark from it with a knife, coat it with wood varnish. For good stability, screw the lamp to a heavy stand with self-tapping screws; wood can also serve as a stand.

A better option is an oak tree; find a broken branch and saw off a circle at least five centimeters thick from it. Varnish or paint it too.

Making a lampshade with children

There is an option for making a lampshade with children. For the frame you will need a canister or bottle with a capacity of five liters. You need to roll the paper strips into a tube, it is best to wrap them around a pencil or sushi stick, then glue the remaining edge with glue.

These blanks need to be glued to the frame in several layers so that there are no gaps. Once the glue has dried, you can put the lampshade on a table lamp or make a ceiling lamp that looks very unusual.

Experienced needlewomen can knit or crochet a lampshade, decorating it with crocheted flowers and ribbons.

To give the product the correct shape, you can use a starch solution or regular glue PVA. Look at the proposed photos of knitted lamps, how much tenderness and comfort they contain!

Note!

This article told you how to make a lamp with your own hands. Using the information received and your own imagination, you can now create an exclusive lighting fixture for any room.

DIY lamp photo

Handmade projects help us add brightness to the interior and make it individual. One option is to make your own lamp for your home. Unusual details, materials, ideas and a little creativity - and designer product ready.

DIY lamps: interesting ideas

There are many models of lamps that you can make yourself. They differ in design, style, and size. A wide variety of materials are suitable for their manufacture - paper, wicker, plastic cups, yarn, fabric, glass bottles, plastic bags, wooden hoops, wire, veneer, old things or what was left after renovation, etc. The easiest option is to make a lampshade with your own hands and purchase ready-made system electrical wiring with a socket. It is accessible even to the most beginners in needlework and creativity.

Wall lamps

You can install a beautiful homemade lamp on the wall near sleeping place, including in the children's room. Most often, unusual lampshades are made of wood, fabric, or wicker for this purpose. But there are also more original options.

At the dacha we made a lamp from two 0.75 liter cans and two pieces of boards with unevenly cut edges. The boards are connected to each other at right angles, and the entire structure is installed on the wall of the house under the porch. The lampshade jars have sockets screwed into them, into which LED lamps are inserted. This style of lamp is ideal for country house or a rustic interior.

Photo gallery: DIY wall lamps

Vine - interesting material to create original lampshades Lamps made from boards are very easy to make and look stylish at the same time. Threads, glue and balloons are all you need to create beautiful lamps You can make it from a board different variants lamps A strangely shaped driftwood is an unusual base for a wall lamp Clouds cut from plywood can be used to create a night light Even pallets can be adapted to create a beautiful lamp with your own hands

Table and floor lamps

Using scrap materials, it’s easy to update a floor lamp or make a new table lamp in ethnic, high-tech, or other styles. Beads, ribbons, and paper cutouts are used for decoration.

Photo gallery: interesting models of do-it-yourself table lamps

An eco-style interior can be updated by making a floor lamp with a wooden lampshade Long and thin branches tied together into a bundle, attached to a stable support, are used to create floor lamp The frame of an old lampshade can be decorated with beads to create a new lamp Ribbons and beads can be used as the main material for a new lampshade or as decoration Fabric lampshades - perfect option For table lamp to the bedroom The lamp can be made from water pipes A lampshade for a floor lamp is easy to knit Original lamp made from aluminum can lids

Pendant lamps

Distributed ceiling lamps made from yarn that is used to wrap balloons, and then the entire structure is covered with glue. For many, such a simple option is their first attempt at this type of needlework. Chandeliers made from driftwood, bottles or suspended structures from plastic pipes.

Photo gallery: DIY pendant lamps

A driftwood chandelier is a bright and stylish piece for the living room You can quickly and easily make a beautiful chandelier from beads Wood material used for making lamps must be varnished Decorate the kitchen or Vacation home You can use a bottle lamp Made from plastic spoons beautiful lamps shaped like pineapple, ball or etc Lamp made of metal graters - stylish and functional decor for the kitchen Remains of water pipes and connecting fasteners - unusual material for ceiling lamp

How to make a lamp

Paper - corrugated, colored, geographic Maps, cardboard, wallpaper, bags and other types - one of the best materials for crafts. A simple lamp made of paper butterflies can be made quickly and without special effort. To do this, you will need a frame from an old lampshade, a metal ring or just wire from which the base for the product is made. Then all that remains is to simply cut out the butterflies and attach them to the frame using silicone glue or, for example, hang them on a wire. It doesn't take long to make a table lamp from plastic pipes or spoons, although the projects are more complex than paper chandeliers.

Paper butterflies for homemade chandelier You can cut according to the template together with your children

Lamp made from paper bags using the origami technique: step-by-step instructions

This lamp can be made wall, table or hanging. To work you will need:

• ready-made electrical base for the lamp - a wire with a socket and a switch, a plug (for a table lamp or floor lamp);
• stand for the lampshade (you can take it from an old one or use improvised materials for this, for example, a thick branch);
• paper bag with an interesting print - 2 pcs. (when gluing, they must be at least 0.5 m long);
• LED lamp;
• thick thread and needle.

Operating procedure:

1. WITH paper bags cut off the bottom and remove the handles.
2. Glue the resulting pieces into one, fold in half and then into an accordion. You should get 16 stripes of the same width.

   The prepared bags are folded into an accordion

3. Fold each strip diagonally. This part of the workpiece will subsequently be the top.

   The paper blank must be bent accordingly in order to later make a lampshade out of it

4. WITH opposite side, which remains flat, also bend each strip diagonally. This part is shorter in length.

   All folds on bags must be symmetrical and even.

5. Carefully unfold the bags and bend the blank along the resulting folds to form a lampshade.

   Using the folds on the paper, a three-dimensional figure is formed, reminiscent of a berry.

6. On top (where the folds are longer) sew the workpiece with a thick thread.

   To keep the lampshade in shape, it is fastened with thread at the top

7. Then insert the socket with the wire inside the lampshade and screw it in LED lamp and hang the structure on a stand.

   Since paper burns well, it is better to use LED lamps in the lamp

LED chandelier from socket-splitters

An ergonomic and unusual chandelier in the loft style can be made from socket-splitters for diode lamps. The finished structure is painted in any color suitable for the interior of the room. It is important to securely fasten all parts. To work you will need:

• ceiling rosette - 1 pc.;
• splitter cartridges - up to 12 pcs.;
• lamps - up to 12 pcs.;
• spray paint;
• paper.

The shape of the chandelier can be any

Spread paper on the work surface and paint the workpiece on all sides with spray paint.

Wait until it is completely dry.

Paint the ceiling rosette only from the front side and dry it too. If necessary, reapply a coat of paint.

If you want to change something in the room, you can simply connect the fittings differently to get a new chandelier shape

Video: how to make a lamp with shades from cups

Anyone can decorate their home with a new handmade lamp. Just choose interesting idea and put in a little effort.

A self-made sconce from scrap materials will decorate any interior. This does not require special skills or great financial investments. You should purchase a lamp socket from a hardware store in advance, and then come up with a lampshade for it. There is only one requirement for materials: they must withstand high temperatures, if the lamp is used with incandescent lamps.

From paper

Openwork

To make sconces, cut out the base for the floor lamp from paper, and using stationery knife make neat holes, imitating lace. This option allows you to diffuse the light from the source.

From cylinders

Lampshades can be easily glued together from a variety of colored paper strips.

From paper tapes

Origami

Option 1

Option 2

Option 3

Herbarium

Materials:

Manufacturing:

Design of a paper lampshade

A Chinese paper lampshade in the shape of a ball can be easily transformed into original item interior

From cardboard

Cardboard is used similarly to paper, but due to its solid form it has a wider range of applications. Cardboard can be used with incandescent lamps without any consequences.

Round lampshade

Thick cardboard is used for its cut texture. Such products are usually not painted. Sconces made of corrugated cardboard, which are made in the shape of a ball, look impressive. You will need a lot of material, but manufacturing will not take much time.

You need to use a compass to draw circles on cardboard, cut them with a stationery knife to get an even cut and glue them together into the desired shape.

Square lamp

Materials:

• corrugated cardboard;
• PVA glue;
• stationery knife;
• scissors;
• cartridge;
• pencil and ruler (triangle).

Manufacturing:

1. On a sheet of cardboard, using a ruler, draw a large square with an edge of 20 centimeters or more.
2. Then, in increments of 1 centimeter, so many smaller squares are written inward until there is no free space left in the center. As a result, the largest square will have an edge of 20 centimeters, the next one will have 18, 16 and so on.

   

3. Using a stationery knife, the cardboard is cut into blanks to create several square frames.

   

4. You need to make 4 such blanks so that the largest square always has the same edge length. Those parts that will be inside may be reduced by different quantities centimeters.
5. After everything is ready, each side plane of the future lamp must be decorated. The outer square will always be the same, and the frames inside can be placed as desired. Glue them together using PVA.

   

   

   

   

6. For the base, thin strips are cut out of cardboard, the length of which is equal to the edge of the square. They are stacked in 4-5 pieces and glued together. A hole is made in one place to pull the cartridge through.

   

   

   

   

   

   

   

7. When everything is ready, the side edges of the lamp are glued together and the light bulb is screwed into the socket.

   

   

   

From newspaper tubes

To create a sconce, cut the newspaper into equal strips, twist it into tubes and, placing them in the desired shape, glue them together. The finished product is placed on top of a socket with an energy-saving light bulb.

Made of wood

Wood offers a wide range of ideas. Even blocks are folded like a tower when playing mahjong, a frame is created from them and the paper is stretched ( Japanese style), connected to each other in a chaotic manner, like a nest.

Dog lamp

Materials:

• Wooden blocks 30 by 25 millimeters in cross section;
• Metal flower pots;
• Wire for connecting the light bulb;
• Cartridge according to the size of the flowerpot;
• Black paint;
• 6 bolts;
• drill.

Manufacturing:

From threads

Original thread lamps are designed for use in a dry room, so they are not suitable for the bathroom, but they look good in the kitchen and living room. They are made using balloons, which are wrapped with threads lubricated with glue. When the structure is dry, the ball is burst and the remaining rubber is removed. The result is a fairly dense wicker frame.

Threads allow you to experiment with shape, size and color finished product. Such a lamp is decorated with beads and seed beads and attached to it. artificial flowers or decorative butterflies. Initially, you should leave holes at the bottom and top for the socket and the possibility of replacing light bulbs. IN in this case It is better to use energy-saving lamps that do not heat up.

From pipes

Loft style sconces are best made from metal pipes and fittings.

Materials:

• Fittings - quantity varies depending on the specific composition;
• Wire and lamp socket;
• Drill;
• Glue for metal.

Manufacturing:

1. Connect the fittings together in a single composition. Lamps in the shape of people or dogs look the most interesting. Some parts are connected to each other using ready-made threads, while others require glue.
2. A small hole is made in one of the “legs” of the object through which the cord will stretch.

   

   

3. When all the parts are connected to each other, the hollow tubes are allowed to electrical cable. It is pulled out from the side where the lamp will have a lamp.

   

   

   

4. The wire is connected to the socket into which the lamp is inserted. Due to the flat and heavy parts, such a lamp does not require an additional stand and can be used directly.

   

   

   

   

   

   

   

From wire

Often a frame is made from it, which is then covered with other material. If the material is too dense, then individual parts will have to be welded or soldered. thin wire It is enough to tie it in an inconspicuous place.

Wire helps to create unimaginable products, imitate other materials, and make antique sconces.

Ball with butterflies

Materials:

• The wire is thick and thin;
• Wire cutters;
• Socket with light bulb;
• Form for braiding (ball, vase, bottle).

Manufacturing:

From bottles

From a dark bottle with a narrow neck you can make a fairy lamp in a couple of minutes. To do this, they immerse it in LED garland with small light bulbs and plugged into the network.

You can cut the bottom off the bottle and then insert a suitable shade inside.

It will be effective if you connect several of these bottles by twisting the wires together.

To detach the bottom glass bottle You will need: wool thread, a lighter and flammable liquid (alcohol, lighter fluid).

1. Close the sink drain and fill it with water. It is important that there are no flammable objects nearby during the process.
2. Remove the labels from the bottle and wash it thoroughly.
3. Where the cut should pass, wind a thread dipped in a flammable liquid several times.
4. Set fire to the thread.
5. Hold the burning bottle over the sink and slowly turn it along its axis so that the fire comes into contact with the entire surface of the future cut.
6. After 2 minutes, sharply immerse the bottom of the bottle in water, after which the bottom will come away on its own and remain in the sink.

From the branches

It’s difficult to make a lampshade for a sconce from wood yourself if you don’t have experience working with this material. A simple way is to use small branches, gluing them together in any shape you like. Natural wood It is convenient to connect with a glue gun.

Small lamps may not require a special frame, but floor sconces will require a ready-made base from an old lamp or a large amount of wire. Such sconces look beautiful in an interior where elements made from natural materials are already present.

From plaster

Gypsum cannot be classified as an improvised material, but it produces beautiful, laconic works. To make a lamp you will need a mold into which you will pour gypsum mixture, so you’ll have to think about it in advance. You will also need tools to make holes for the cartridge and wire.

Art supply stores have lamp bases in different shapes. They are usually made of disposable plastic and are easy to handle. To make several identical lamps, you will have to find a silicone mold.

Materials:

• large glass flask;
• medical bandages;
• gypsum;
• water;
• socket with lamp.

Manufacturing:

In order for the lamp to transmit light, the mixture is made strong enough, but the bandages are wound in a maximum of 3 layers, leaving holes. If desired, the finished lamp can be painted with spray paint.

From plywood

Plywood is easier to handle than solid wood, but it also requires basic carpentry skills, since to make sconces you will first have to create a drawing and precisely cut out each part.

Plywood lamps can have different shapes. For the production of flat wall lamps cut out 2 identical shapes, which are secured at a short distance from each other. A socket with a light bulb is inserted inside. When the lights in the room are turned off, and only the night light is on, a person sees only the outlines of a figure made of plywood.

Flat lamp

Materials:

• plywood;
• 3 brackets;
• jigsaw;
• dye;
• cartridge;
• self-tapping screws;
• glue gun

Manufacturing:

pendant lamp

Materials:

• 1 sheet of thin plywood measuring 1 square meter;
• Wood glue;
• Grinder machine;
• Electric circular saw for small jobs;
• Lamp socket;
• Pencil;
• Compass.

Manufacturing:

1. Mark 2 figures on a sheet of plywood with a compass. The first has a diameter of 10 centimeters, while another circle with a diameter of 4 centimeters is inscribed inside. The inner circle must correspond to the size of the socket of the future lamp, so it can be larger.
2. A second circle is drawn with a diameter of 14 centimeters on the outside and another one with a diameter of 8 is inscribed there.

   

3. 2 rings are cut out of the blanks, which are the top and bottom of the frame for the lamp.
4. On the remaining sheet of plywood, side wedges in the amount of 20 pieces are drawn, and recesses 1 centimeter deep and 4 millimeters wide are made there.

   

   

5. All parts are carefully sanded so that the cut parts become smooth.

   

6. The side blanks are connected to the rings.

   

7. A cartridge is inserted into the upper ring. The lamp is ready for use.

   

   

Letter shaped lamp

Made from lace

Typically this material is used for classic floor lamps. Balls are used as a base, thick paper or wire. The lace base is secured with threads or glue. Some people specifically soak the material in starch so that it holds its shape well.

Materials:

• piece of lace;
• starch, PVA glue, gelatin (optional);
• balloon;
• cling film;
• socket with a light bulb;
• sharp scissors.

Manufacturing:

1. Cut out circles of the same shape from the lace; for this it is convenient to use a large plate.

   

   

2. Dip the workpieces into a container with diluted starch to make the material harder.

   

   

3. The base will be a balloon. To make it easily come away from the lace, the ball should be covered with cling film.

   

4. Cover the entire ball with lace, trying to carefully smooth out the folds. The layers should be on top of each other. If the lace is thin, then after the first layer the structure should be left for an hour, and then the second layer should be applied.

   

   

5. After 2 days, pierce the ball and remove it.

   

6. Make a hole in the resulting sphere to insert the cartridge and secure the suspended structure.

   

   From yarn

   If you have knitting skills, neat floor lamps made with crochet and knitting look beautiful.

   Materials:

   

   

   • wooden plank;
   • electrical cord;
   • lamp socket;
   • gelatin;
   • yarn.

   Manufacturing:

   1. Using a hook or knitting needles, knit a blank for the lampshade, which should be shaped like a dome.

      

      

   2. 2 packs of gelatin are diluted in a glass of water, the future lampshade is placed on a vase or other suitable surface and lubricated with dissolved gelatin. Leave it for a day.

      

   3. A circle-shaped blank is made from wood; it will be attached to the wall. A hole is made in it for the cable and a small groove so that it does not interfere with the lamp fitting tightly to the surface.

      

      

   4. A cable is inserted into the hole, then a dried knitted lampshade. The cable is connected to the cartridge, the structure can be hung on the wall. If desired, you can find a metal nozzle on the lampshade so that it better holds its shape at the base. In the same way, an overlay in the shape of a wooden plate on the wall is made to match the lampshade.

      

      

      

      

      

      

   In addition to knitting, yarn is also used for winding the warp. You can stop at one color or take several, forming stripes. With enough skill, yarn can be used to create designs, logos, and words.

   

   It is best to use acrylic yarn for lamps and not use incandescent lamps.

   From cutlery

   Unusual compositions are created from metal cutlery. To make a sconce out of them, you will first have to make a strong base of dense wire. Then drill a hole in each handle, and then secure all the devices to the frame. A similar product looks good if different cutlery of the same size is used.

   

   In a room where the interior contains a lot metal parts, they make multi-level lamps from spoons that resemble flowers. To do this, 7–8 spoons are secured around the cartridge using wire, forming petals. With small cartridges, use tea or coffee spoons. Such flowers are beautifully collected in one chandelier.

   

   Made of plastic

   Plastic bottles can become the basis for sconces. The same type of parts are cut out of them, which are then connected to each other. To make the product look neat, the sections are treated with a lighter. Often this method is used to make a lamp in the shape of a ball. You can connect the fragments together with a glue gun, but you can only use an energy-saving lamp with such a floor lamp.

   

   

   From spoons

   Another option for a plastic lamp involves the use of disposable plastic spoons. The result is a lampshade that looks like a cone, which can be spray painted if desired. They take as a basis plastic bottle, 3 or 5 liters. The bottom is cut out. And then spoons are glued along the rows, the handles of which have been removed in advance. Convenient way- glue gun. Manufacturing starts from the bottom and imitates scales.

   

   From plates

   Materials:

   • 50 flat plates with a diameter of 18 centimeters;
   • a ready-made lampshade in the shape of a drum with a diameter of 15 centimeters and a height of 13 (if it is made of paper, the excess can be trimmed);
   • glue gun;
   • lamp base;
   • ruler, scissors, pencil and stationery knife.

   Manufacturing:

   
   

   From clothespins

   Materials and tools:

   

   • socket and light bulb;
   • construction metal mesh;
   • clothespins;
   • a can of paint of the desired color;
   • metal scissors;
   • metal paper clips.

   Manufacturing: