≡× MENU

• Repair
• Repair
• Interior Design
• About everything
• About plumbing

How to make a corner shelf in sizes 36 50. Do-it-yourself kitchen corner - the simplest and most affordable ideas. Tools, materials and general principle of operation

Drawing a corner cabinet will help you assemble it yourself.

If the area of ​​​​the room is small, then each cabinet takes up a lot of space. There is a way out, it is necessary to put one corner instead of several bulky cabinets.

It is very roomy and takes up little space. Learn how to do corner cupboard with your own hands, you can from this article.

In contact with

Classmates

Varieties of corner cabinets

Before starting work, you need to find out what shape the future cabinet will be. He can be:

• trapezoidal;
• in the form of the letter "G";
• triangular;
• 5-wall.

Each option is interesting in its own way, when choosing it is necessary to take into account the place where it will be arranged. Be sure to make a sketch or drawing of the planned cabinet, make detailed drawings before work.

When performing calculations, it is necessary to carefully measure the dimensions of all walls, shelves. How to make a standard small cabinet with dimensions of 900 by 900 mm, floor to ceiling height of 2.500 mm, will be discussed in more detail below. Material calculations, a detailed assembly scheme will be presented.

Manufacturing process

Any construction work starts with the preparatory stage.

1. 1. A diagram of a corner cabinet is being drawn up.

1. 1. It is necessary to calculate how much and what material is required for work. To make the calculation more accurate, an assembly diagram is also drawn up first.

1. cook necessary tools and materials.

• self-tapping screws;
• glue;
• dowel;
• mirrors;
• accessories;
• rollers, it’s not worth saving here, it’s better to take high-quality ones so that they last a long time;
• profile, give preference to steel.

Immediately check the tool kit so that there is no downtime in work later. You will need:

• level;
• roulette;
• hacksaw;
• hammer.

In order for the work to be done more accurately and quickly, it is better to entrust the cutting of the boards to the masters, to do this work in the workshop. You can assemble yourself.

Size specification

The dimensions of the cabinet must be determined by the area of ​​\u200b\u200bthe room where it is planned to be placed and the general standards must be taken into account.

1. The width of the compartment where outerwear is stored cannot be less than 0.8 m.
2. Storage compartment height outerwear cannot be less than 1.4 m.

Pre-planned schemes will help not to make a mistake in size.

Assembly

Assembly is usually carried out in the same way, regardless of the type of cabinet. The sequence is as follows:

• first, steel corners are mounted where it will then be necessary to attach side walls to the floor and ceiling;
• from finished parts assemble the frame;
• attach rollers to the door;
• mount guides;
• install doors.

Good to know: in the work on assembling a corner cabinet, it is imperative to use a level, otherwise it is possible to allow distortions at the doors.

When the main work is done, it is necessary to assemble the cabinet inside. Install the brackets, arrange all the shelves in their places. After that, it remains to install accessories.

The work is carried out in the following sequence:

• install partitions;
• fix shelves, hangers, mirrors;
• screw on the knobs.

According to the same scheme, you can assemble the wardrobe yourself from drywall. The principle of operation will be slightly different.

Drywall corner cabinet

For manufacturing, you first need to carefully work on the drawings. The quality and speed of work will depend on how they are made. The drawings are made as follows:

1. It is necessary to determine the location of the future cabinet.
2. sketch, draw detailed diagram, in the same place indicate the dimensions of all shelves, brackets, parts.
3. The entire calculation is carried out with an indication of the thickness of the material.

Note: when making a drawing, it is necessary to take into account everything to the smallest detail, the slightest inconsistency, and there will be difficulties during assembly.

The assembly of the cabinet from begins with the installation of the frame. First, markings are made on the floor and ceiling. For convenience, you need to use a rubber shock-absorbing tape.

sheathing

When the frame is prepared, you can proceed to the sheathing.

1. Pre-cut blanks are placed in the intended places and screwed with self-tapping screws.
2. The sheets are finally fastened, the screws should be placed at a distance of about 200 mm. Hats of hardware should be recessed by 1 mm.
3. In places where the shelves will be attached, it is necessary to install the corners. Next, the shelves themselves are laid on them.

Take note: it is not necessary to pre-order doors for the cabinet, it often happens that after installation work, sizes vary slightly.

Now it remains to mount the lamps, rods. When the main frame is ready, you need to measure everything again and order the doors.

Finishing

After the preparatory, rough work, it remains only to embellish the closet a little. You need to do the following:

• prime the surface both inside and out;
• carefully seal all joints with gypsum plaster;
• stick a serpentine tape;
• install paint corners at all corners;
• apply a thin layer of putty, dry, sand and re-putty again;
• prime everything again, and after complete drying, finish. It can be painting or tiling, or other materials. Here the owner chooses at his discretion.

All the wardrobe is ready and will delight all households for a long time.

How to make a corner cabinet with your own hands, see the following video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

It is quite difficult to make a corner cabinet for the kitchen on your own, but the result will meet all expectations. Creating furniture for kitchens of non-standard dimensions depends on the layout of the room. Stores don't always offer corner cabinets to save space in a small kitchen.

It is quite difficult to make a corner cabinet for the kitchen on your own, but the result will meet all expectations.

Sometimes you may only need a floor cabinet, but the conditions of a small kitchen do not allow you to put it indoors. It will be cheaper to make it yourself than to spend money on ordering furniture custom sizes. Having thought over the design at the beginning, you should begin to develop a drawing indicating all dimensions. Purchase necessary materials made on the basis of the calculations.

On sale for creating pieces of furniture there is always chipboard and MDF. These types of materials are in great demand. The specialists who sell them can immediately process the edges of the workpieces after cutting. If you order drilling of holes in advance, this will allow you to connect the parts with the help of dowels.

You can make not only small floor cabinets, but also furniture sets. They are necessary for storing utensils, dishes, household kitchen appliances, products. Before creating such a project, a kitchen plan is drawn up, where the location of the stove, sink, pipes, hoods, etc. is marked. Wall cabinets allow you to disguise the gas meter and wiring. Inside they provide shelves where dishes should be stored.

If the kitchen is already furnished, then it is the plan that can help to increase its functionality. When compiling it, you need to make sure that the new furniture will fit between the items already installed. It may be necessary to make drawers for the kitchen, the exact measurements of which have great importance. Furniture doors should open and fold freely, and drawers should slide out. When taking measurements in the kitchen, it should be noted that its corners may not be perfectly straight.

It is important that the corner cabinet can fit closely between adjacent pieces of furniture. The curvature of the corners and walls leads to the fact that adjacent cabinets have walls that are 1 cm or more apart from each other in one place, and in another - such a gap disappears. This results in a lack of space for new furniture. If you make an angular structure yourself, then it can always be made smaller in size.

How to make a kitchen corner cabinet (video)

Materials for self-creation of furniture

A well-furnished kitchen should be furnished in a unified style. If the kitchen has furniture, appearance outdated, you can replace their facades. This will require the purchase of new materials. For this purpose, the decoupage technique is also suitable. You can decorate in this style furniture made of same species materials.

The choice of material can begin after determining the place where the kitchen cabinet will be located. It can be corner or wall, which is determined in advance. Pre-measurements are made, and then sawing is ordered.

It is possible to produce not only small floor cabinets, but also furniture sets

The material used to make kitchen furniture must meet the following requirements:

• resistance to high humidity and hot steam
• strength;
• ease of care, etc.

Laminated chipboard, which has increased moisture resistance and density, is considered ideal. The thickness of this material can be 16-18 mm. From above it is covered with a layer of artificial veneer. To make a cabinet for the kitchen, you can use the following types of materials:

• MDF boards;
• multiplex;
• wood mass.

In order to save materials, you will need to plan the manufacture of furniture small size. Eg, narrow cabinet for dishes will not take up much space in the kitchen.

A wall cabinet for the kitchen, made of MDF boards, will withstand any adverse effects. The cost of this material is more expensive than chipboard, so the product will be of better quality. Surface MDF boards can be matte or glossy, painted or laminated.

The kitchen, furnished with multiplex furniture, is resistant to mechanical stress. This material is considered moisture resistant, it is made of thick veneer. Polyurethane varnish is used to cover the surface. If you make custom-made curved panels, then you can make a corner sideboard with a radius facade from this material.

Solid wood is the most expensive material, which requires special impregnation, as well as protective varnish treatment. From such a canvas, you can make an elite sideboard for the kitchen by combining it with other types of materials. For example, it can be frames for facades.

Do-it-yourself corner kitchen (video)

Preparing to build the model

The kitchen is a place for cooking, so safety requirements must be observed in this room: the distance between the cabinets and the sink, table or stove must be made acceptable. The corner design of the cabinet includes left and right sidewalls, symmetrical to each other. The dimensions of the roof and bottom are usually exactly the same. Some models may include a back.

The height of the kitchen cabinet is usually related to the height of the table, stove or sink. If the kitchen has a high ceiling, then you can make a cabinet-pencil case with your own hands. The countertop, which is the cabinet cover, should protrude beyond the facade. The depth of the inner shelves is less than the lid and bottom, otherwise the door of the product will not close. Wall cabinets sometimes they reach the ceiling, especially in small kitchens.

The kitchen, furnished with multiplex furniture, is resistant to mechanical stress

In addition to the main materials, auxiliary elements will be required:

• fittings (hinges for doors);
• lifting mechanism with a latch with a hinged door;
• corners for hanging wall cabinets;
• shelf holders;
• dowels, pins, euro screws for fastening elements;
• pens, etc.

From the tools you will need:

• jigsaw;
• iron;
• drill;
• screwdriver;
• milling cutter;
• stapler, etc.

After cutting the material, you can begin to assemble. It is carried out in the following sequence:

1. Drill holes in the sidewalls for the shelf supports. Connect them using jumpers that are horizontal.
2. Fix the roof and bottom.
3. Attach drawer guides to the body.
4. Mount the back and strengthen the back bar.
5. Fasten the false panel to the roof, sidewall and bottom.
6. Hang the doors, having previously strengthened the hinged hinges.

Sometimes creating some kind of furniture with your own hands is much easier and cheaper than buying ready-made headsets in salons. For example, to create a corner cabinet with your own hands, it is not at all necessary to be seven spans in the forehead and have a whole set of skills. In fact, the design of such a piece of furniture is simple, and there should not be any problems in its implementation.

Making a corner cabinet

We will create a wardrobe that will have a sliding system of two facades. At the base of the box there will be a square, one corner of which we will cut off. Before we make a corner cabinet with our own hands, we need to measure two quantities: the depth of the sides and the distance between them (the sliding system will be built into it). The height of the cabinet also matters. Let's say our design will have the following parameters: 600 mm by 1500 mm by 2300 mm.

We draw up a project, first we draw a diagram of the upper part, two sides and a corner support. The latter will be two parts that are connected to each other at a right angle. The same parts will partially be the back wall of our cabinet - shelves will be attached to it. WITH right side we will have shelves, on the left - a pipe on which outerwear is hung. Thus, this will be the foundation for the cabinet.

Box preparation

Our corner cabinet will consist of two boxes. The first one will be represented by a module with shelves (you may have a different number of them). The second module will consist of two elements - straight and angular, which will allow access to the pipe for outerwear. The first module is assembled simply: a chest of drawers and shelves are built into it. At this stage, it is very important to correctly calculate the depth, because otherwise the sliding system will not close completely and will rest against the facades. With the second module, there is even less work, since only the installation of the bar is required here.

How to choose a configuration?

Before you make a corner cabinet with your own hands, it's a good idea to understand its dimensions. So, standard height 2200 mm and above are considered, which means that the opening for facades must be at least 900 mm. If the doors are hinged, then the sashes should be as small as possible in width. In addition, the load on the hinges will be moderate, and therefore the cabinet will last longer.

Second important point- taking into account the parameters of the room and the expected load of the cabinet. For each specific room, you can choose a specific design. For example, cabinets in the form of a trapezoid and a triangle are too complicated in terms of calculations, besides, they will have to take into account both special fittings and certain details. Fitting the facade correctly without a professional measurer in this case is almost impossible.

Or maybe a classic?

The classic version of the corner cabinet has five walls: it is inserted between the sections in the furniture set. The system seems complicated, but in fact it is the most common and easy to manufacture. But if we put such a structure as independent element- it is too complicated, and it will take a lot of materials to create it. The closet will turn out to be overall, it will take up a lot of space, but it simply will not work to put a lot of things into it. So if possible, it is best to create a built-in corner cabinet with your own hands: working space there will be more in it, and much less materials will be required.

Kitchen options

Of course, creating a huge one with your own hands is not easy. And therefore, most often this piece of furniture is bought in the bedroom or dressing room. But what to do when required constructive solution for the kitchen and at the same time it is impossible to buy a separate cabinet? The answer is simple: "Make it yourself!" For example, for a kitchen, an L-shaped design, consisting of two modules that are installed in a corner, could be an ideal configuration.

similar angular Kitchen Cabinet it's very easy to make by hand. Its design will be compact and ergonomic, and therefore even in the smallest kitchenette it will look harmonious. As for the number of shelves and the opening-closing system, the preferences of the owners play the main role in this matter. At the same time, it is worth remembering the mandatory nuances.

1. You should not try to cut chipboard at home on your own, since the peculiarity of the corner structures is that they need to be precisely adjusted to each other and the geometry must be carefully observed.
2. Creating a corner kitchen cabinet with your own hands, you should not save on fittings. For example, using a sliding door mechanism, buy full fittings for openings, and savings can lead to the fact that in a year your locker will die.
3. You should carefully consider the alignment of the floor and ceiling so that your design fits perfectly into the opening allotted to it.

How to assemble?

Assembling a corner cabinet is not the easiest process, and therefore you can spend a lot of time on it. To do this, you will need to stock up on a screwdriver, hammer, nail puller, hex keys, puncher or drill, hacksaw. It is worth remembering that all modules of this design are attached with the help of which they are inserted and fixed immediately. Be sure to make sure that the holes match each other. Before mounting the doors, it is worthwhile to install the mounting strips and plastic linings for the corner hinge - it is fastened with self-tapping screws.

If you need to attach the corner module to the cabinet, then you need to fasten it in several places. This will make the structure stronger and more reliable, and it will last much longer. As you can see, creating the simplest corner wardrobe with your own hands is not very easy, but it is quite possible. This is a universal element of furniture, since it allows you to more rationally and competently use free space. If you create it yourself, you can give the system any constructive and stylistic features making it perfect for a room or kitchen. Well, do not forget about the timely drawing up of drawings - they will definitely be useful if you want the corner cabinet, created with your own hands, to be solid and of high quality.

Corner wardrobes are extremely ergonomic: thanks to their beveled shape, they do not look bulky and at the same time are extremely spacious. Let's look at examples of how to make a corner cabinet with your own hands - what models can be implemented, what can be typical dimensions, filling and how to calculate the details on the example of ready-made drawings and diagrams.

Designs, drawings and photos of corner cabinets

Conventionally, corner cabinets can be divided into two categories: beveled trapezoidal and strictly rectangular shape, with diagonally and perpendicularly located facades. In both cases, the cabinet can be:

• Symmetrical and asymmetrical.
• With separate mezzanines and without mezzanines.
• Combined filling and allocated exclusively for shelves or hangers.
• With inner or outer drawers.
• With a different number of facades (one-door, two-door, three-door).
• With execution in the form of showcases, open shelving and designed for storing clothes.

We will consider only the schemes of wardrobe (dress) corner cabinets with our own hands.


Corner cabinets with perpendicular doors, most often, are an added composition of two ordinary cabinets of a slightly modified design. In rare cases, there may be a cast structure, especially if the front part is sliding, "accordion".

The advantage of trapezoidal corner cabinets is their large capacity and functionality. For example, the width of the outer sidewalls can be reduced to a minimum and this does not hurt to place coat hangers with bulky clothes - after all, to the center inner part expands.

Do-it-yourself corner cabinet: determine the size

Before you wonder how to make a corner cabinet with your own hands, you need to decide on overall dimensions. Ergonomic forms attract many, but it is not always possible to achieve the desired if the space allocated for placement is too small.

The smallest dimensions of a do-it-yourself corner cabinet can be compared with the typical dimensions of a kitchen hinged module. It occupies 600x600mm from the corner. In order for the facade to be of sufficient width (400 mm minimum), the depth of the sidewalls (sidewalls) is set to no more than 300 mm. Naturally, with such dimensions, there can be no question of placing the barbell under the hangers. Only shelves or hooks for clothes.

For a corner wardrobe with a compartment for hanging clothes, the distance from the corner, at least on one side, must be at least 800mm. Then the depth of the stand can be laid as 450mm, which is quite enough for coat hangers with light clothing (for "men's" and outerwear, 500mm is required). Do-it-yourself corner cabinet schemes are approximately the same, in the ratio of the depth of the cabinets and the remaining space for the facade.


With asymmetric options, it is quite possible to realize what was conceived with dimensions from an angle of 850x650mm, 800x700mm, etc.

How to make a corner cabinet with your own hands using a drawing as an example

Consider a typical symmetrical model, with overall dimensions of 2100x900x900mm. Do-it-yourself drawing of a corner cabinet will look like this.


Along one of the sides, the width of the case allows the placement of shelves, they must be made taking into account the required space for hanging the rod - from 500 mm minimum. Drawers can be built into the section with shelves. The only nuance that should be taken into account in the future is the placement of hinges on the facade. The loop must not “get” into either the drawer or the shelf!

The height of the cabinet allows you to place two rods under clothes. A distance of 900-1100 mm is sufficient for short jackets, shirts, and hem long dresses you can simply "throw" through the lower bar. Or you can make a shelf on top or bottom, under hats or shoes.

How to calculate the details of a corner cabinet with your own hands

After you have decided on the dimensions of the corner cabinet with your own hands, internal content, you can start calculating the details. The easiest option is in the form of a table in the Excel office program.

• We write down all the details in strict accordance with the texture of the picture, first the length, then the width. If you drive the formula into a tabular form by calculating the quadrature of each part, then you can sum it up and roughly estimate how much the cabinet will “pour out”.
• At the same time we denote visible sides, which will need to be rolled up with a single edge. Also, the formulas will help to pre-calculate the footage of the end tape.
• I recommend highlighting the details irregular shape so as not to lose sight of them (for example, as in the table below - yellow). And also to clearly show along which side they will roll up the edge.
• You can see how to calculate the size of the facades for a corner cabinet. Strictly speaking, the facade part can be made of another material - for example, MDF or solid wood.
• Detailing fiberboard is considered a similar method.

Do-it-yourself corner cabinet cut cards

Estimated dimensions of parts from Excel are transferred to special program cutting. Details for which the direction of the pattern is unimportant (for example, stiffeners, plinth, internal shelves) can be rotated to minimize waste. In our case, there is a reason to make the front part of a different material - the body of the corner cabinet with your own hands economically “lays down” on two sheets.


The cut can be ordered from a third-party organization along with PVC seaming. Typically, such services are provided by all firms trading chipboard. At home PVC conditions Rolling up is quite laborious and accurate is unlikely to succeed. You will have to be content with melamine tape, the only plus of which is cheapness. The table shows that it will take 28.83 running meters. But it is better to take with a margin, + 10-15%.

How to mark cabinet details for drilling

If you correctly mark and drill all the details on the corner cabinet with your own hands, then in the end it will assemble very simply, like a designer. The most convenient way to do this is in special furniture programs, for example, Basis Furniture Maker.

The principles are simple:

• Furniture is assembled on Euroscrews (confirmations).
• Details are drilled at the end and from the front side.
• The distance from the edge of the front side part should be the same. For example, 50 mm. Or in the center.

After the fasteners are placed, we number the parts. If there are parts of the same size, but with different principle fasteners, we use additional markings (a, b, etc.).


In Basis Furniture Maker, you can get drilling specifications in this form.


But here you need to be careful, to clearly understand where the details of the corner cabinet with your own hands have a “face”, and where is the “wrong side”, along the sides rolled up by the edge. The program does not see this nuance, it arranges fasteners from left to right. And in the process of drilling, parts that need to be mirrored may come across. In principle, it is not difficult. Anyway, with drilling specifications, the whole process will go much faster.

How much does it cost to make a corner cabinet with your own hands?

At correct compilation do-it-yourself drawings of a corner cabinet, all the calculated stages, the risks of errors that lead to inevitable additional expenses are reduced to zero. If you make any furniture with your own hands, then it is always cheaper. Actually, nothing prevents you from predicting costs before the start of all work. Find out all the prices for materials, accessories and hardware in your city that will be required when making a cabinet with your own hands, and drive it into a simple Excel plate.


The most significant costs will be for the purchase of chipboard and cutting. We took a typical model - from changes up or down by 100-200 mm, the material consumption will not change significantly. It will also take approximately 2-3 sheets, depending on the number of shelves and fronts (whether they will be ordered separately or not).

The ability to make furniture with your own hands provides many advantages. Finished sofa or chair with individual sizes fit perfectly into the area of ​​​​housing, and the upholstery chosen in the right way will match the interior of the room. It is also important that a new piece of furniture will cost half as much, or even less. Many home craftsmen on ottomans and stools have gotten their hands on it, and now they dream of making corner sofa with your own hands.

Benefits of making your own sofa

Each person can make a sofa with a small set of tools and a minimum level of training. The sofa that we offer you to make will not be inferior in quality to the assortment that is available in 90% of modern stores, and will even surpass many offers. In favor self-creation There are some compelling arguments:

• you save cash. The sofa will cost three to five times cheaper than purchased in a store. We invite you to design a sofa with maximum care for the level of economy, while not compromising quality.
• You make a corner sofa with your own hands, and therefore you yourself are engaged in quality control! You should not be afraid that there is raw timber in your sofa, there are knots in critical places, and poor-quality foam rubber in the upholstery.
• You can make a corner sofa of the design you need. According to your needs and sizes.
• In the future, you can make your own upholstery of the sofa and save again. For example, you can see how much it costs to order a professional furniture upholstery today
• And, of course, there is nothing to compare with the satisfaction from work and pride in a product made by oneself.

Material selection

We plan to achieve reliability with the help of thoughtful design, high-quality assembly and manual selection of materials. Do not use laborious and complex connections, for example, spike products - which are not available to inexperienced do-it-yourselfers. Expensive materials(laminated boards, timber with large section) should not be taken.

For work, you will need the following materials: coniferous timber with a cross section of 30 by 50 millimeters (mainly pine), fiberboard, chipboard, birch plywood, which has a thickness of 5 and 15 millimeters, screws or self-tapping screws for wood, nails, synthetic winterizer with a density of about 140-170 g /dm, batting, foam rubber with a thickness of 20 and 40 millimeters and a density of at least 30 kg/m3, carpentry glue and glue for foam rubber, foam rubber, furniture fabric, furniture legs 50 millimeters high, sofa lifting mechanism.

Do not try to simplify the task - do not fasten the details with nails, because they quickly become loose, the corner sofa begins to creak and falls apart before our eyes. by the most best solution are self-tapping screws. Crashing once into wood, such hardware will hold the load for a long time.

Not without glue carpentry. But before you lubricate and connect the surfaces, you should make sure that the assembly is correct. When even the most ordinary glue grabs, it will no longer be possible to separate the parts. Unlaminated boards need to be varnished to prevent the release of formaldehyde into the air, so prepare the varnish.

Tool preparation

To make a corner sofa with your own hands, you will need the following tool: a hand saw with a simple miter box to create an even cut, an electric drill with speed control to use it as a screwdriver, a furniture stapler, sewing machine, sharp knife for cutting foam.

You can make the simplest miter box yourself, or you can buy it. Some difficulties may arise with hand saw in the process of sawing chipboard and plywood. Better to use circular saw. There is also a simpler solution - order a cut according to the dimensions you need in the place where you plan to purchase the material. This is true if you work in a city apartment, because such an operation is the most dusty when self-manufacturing corner kitchen sofa or sofas.

Making a corner sofa

First of all, decide on the design of the future corner sofa and its location in the living space. Leave for later complex structures with oval tables and shelves. First, learn how to make a sofa with your own hands in the simplest shape and configuration, and then create detailed drawing do-it-yourself corner sofa with all sizes and details.

armrests

The sofa requires two mirrored armrests. Armrests should be 900mm long, 200mm wide and 550mm high. take great detail Chipboard and 2 long beams, screws turn in the direction from chipboard to beam. Mounting step - not less than 20 centimeters. We screw 4 screws into each bar, and 2 into the end of the bar.

Then it is worth nailing the fiberboard. It is necessary to use nails 2 by 25 in increments of 10-15 centimeters. If you want to make a do-it-yourself Eurobook corner sofa “for centuries”, additionally use wood glue for nails. Screw the chipboard overlay well and align it with the bottom and back edges.

After assembling the armrest, glue it with foam rubber. Before sticking, slightly sew sharp edges and corners on the top of the product with a rough file or planer. Please note that it is not customary to glue foam rubber on back wall armrest, stick a layer of batting there.

Assembly of the left side

First, fasten two pieces of chipboard with plywood overlays on screws and wood glue. Each half should have four screws. Screw two racks of timber and make a screed with bars. Attach a "ladder" to the main sofa. The upper beam should fit closely to the lower one and rest on it.

When assembling the seat frame, remember that this part carries heavy loads. For work, it is better to choose a quality timber that does not have knots, especially on long bars. If the knot occupies more than 40% of the section, then you should refuse to use such a beam when making a kitchen corner sofa with your own hands. When assembling the frame, measure the diagonals of the frame with a tape measure - they should be the same.

Install the assembled frame into the frame. To make it easy to insert, loosen the fastening of the front bar. Do not forget to coat all surfaces with glue, and you can tighten it with screws. Screw long screws into the ends of the longitudinal bars, which are 70-90 millimeters long.

Fasten plywood with screws and glue. The distance between the screws should be no more than 20 centimeters. If you will use for upholstery dense fabric, which does not pass air well, it is recommended to make holes in plywood every 30 centimeters, which have a diameter of 15-20 millimeters for air removal.

Attach the fiberboard to the back with large-head nails and glue, and stick on the foam cushions. Upper layer make the foam rubber on the seat whole, and the lower ones can be made from several spliced ​​pieces, the main thing is that there are no voids.

Assembly of the right side

After you have successfully collected left side do-it-yourself folding corner sofa, the issue of its manufacture is almost resolved. Start Compiling constituent elements right side and remember that its bottom usually acts as a linen box. Coat all chipboard parts with varnish or choose laminated chipboard for work.

There is another method: before assembly, you can wrap the side of the parts from timber, chipboard and fiberboard, which will turn inside the box, with teak or calico. Pre-treat all sharp edges sandpaper so that the fabric does not rub on them.

In a familiar way, fasten the chipboard parts with a plywood lining and assemble all the blanks according to the drawing. Screw the bars along the perimeter, boxes will rest on them. You can use any bars and even with knots - everything that you have classified as waste. Nail the bottom of fiberboard.

Mark and drill the bolt holes for the corner sofa lift mechanism. Use furniture bolts. They should look out from the side where there is a beam. To glue the foam cushion for the seat, follow the same principle - place a single layer of foam rubber on top, stuff the two lower layers from pieces.

Filling of frames

To get started, take measurements from all surfaces, because you will cut the foam rubber on them. Having cut out the part, immediately stick it in place. Each next one will be easier to customize. For seats, you need to use foam rubber, which has a thickness of 100 millimeters.

If you have not found something similar, you can glue from 2 sheets of 40 millimeters and one of 20 millimeters. All cuts can be used to cut out a suitable geometric shape and fitting such pieces to each other. If you do all the work carefully and slowly, soon you will be able to make custom-made corner sofas with your own hands, which will be a good addition to the family budget.

Homemade sofa upholstery

For fitted surfaces, make patterns. The first thing to do is to measure the sofa you made yourself. Visually divide the sofa into sections. Remember that the cut pieces in any case, and even if your sofa has a non-standard shape, should be rectangular. Measure the two armrests, backrest and seat.

Next, you need to cut out patterns from wallpaper and newspapers, comparing their sizes with the drawings. Patterns can be used to cut fabric. If you find it difficult, just attach the material to the seat or back, marking the boundaries with chalk. The fabric is cut inside out. Leave a seam allowance of at least 5 centimeters, and if the edges of your chosen fabric are crumbling, then you should leave more.

The fabrics used must be washed and ironed. The fabric must be placed on flat surface wrong side up on the section of the sofa, which correspond to the pieces of fabric. The DIY corner sofa video shows how to attach the pieces to the sofa with pins and fix their position. Without removing them from the sofa, put the pieces together and sweep with a contrasting thread between them.

In order for the cover to sit perfectly on the sofa, all its corners and bends should be taken into account. After the sweeping procedure, you need to cut off the excess fabric and sew all the seams on a typewriter. Turn the cover right side out and try it on the sofa. If you are planning, please enter necessary adjustments and make additional seams, then removing unnecessary fabric.

Drawstrings can change the look of a sofa, hold fabric, and reduce wrinkling. Make holes for them in the plates in advance. For tightenings, it is customary to use loops of nylon cord, pre-sewn to the upholstery.

In order to reduce the level of abrasion of the foam rubber, lay agrotextile between the sheathing and this material, which is known among covering materials for gardens. Then shoot upholstery fabric stapler. As a result, you will get a comfortable, neat and budget corner sofa.

Now you can make a corner sofa or bed with your own hands. The main thing is not to choose complex designs and drawings that are not clear to yourself. Everything should happen gradually. If you can’t do some things on your own or do a certain stage, then watch the video we suggested or contact the professionals and be sure to watch the process. And of course, if you do not want to waste your time and make a sofa yourself, you can buy corner sofas, which are large assortment presented in modern stores.