• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Technoelast epp roofing roll technonikol. Technoelast is a family of modern roofing and waterproofing coatings Ekp and epp which top layer

Retail price: on request

Technoelast EPP - lining roofing and waterproofing material.

Purpose Technoelast EPP

The device of a roofing carpet of constructions (lining layer); waterproofing of building structures. Particularly recommended for use in structures subject to movement. Application: industrial roofs, loadable roofs, foundations, underground garages, boiler houses, subway vaults, swimming pools. Combined with EKP Technoelast. It is used at temperatures up to -35 0С.

Structure of Technoelast EPP

Manufactured Technoelast EPP applying a bitumen-polymer binder to the polyester base (SBS modified bitumen, fillers). Protective on both sides polyethylene film(to protect the material from sticking during storage and transportation). Durable, strong and elastic material, reliably protecting from moisture, biostable. Installation is carried out by welding with a propane torch.

Technoelast EKP can be used as a lower quality analogue

Specifications

Weight of material, kg/sq.m. 4.6

Thickness, mm 4

Material length / width, m. 10x1

• - in the transverse direction 400
• - in the longitudinal direction 600

Moisture absorption within 24 hours, by weight,% 1

Weight of binder from the welded side, kg./m2 2

If you need reliable waterproofing roofs or structures in contact with the ground (foundation, walls of basements, cellars, overpasses), Technoelast EPP TechnoNikol is suitable for you.

A durable film with a bitumen-polymer base technoelast has several modifications. Insulation will protect the roof from heavy rainfall, it is used during installation reinforced concrete structures, foundations, flyovers, pools, used for underground laying. Roll waterproofing EPP is resistant to tearing, mechanical damage. Due to the special structure insulating material ensures maximum durability.

Specifications

Benefits of waterproofing

Waterproofing technoelast EPP is resistant to microorganisms. Structure and functional purpose remain unchanged at high temperatures. For construction, repair and roofing works it is profitable to buy technoelast EPP (bitumen-polymer film) from Teplosnab in Moscow. Consider the main advantages:

• absolute security;
• service life up to 30 years;
• excellent flexibility;
• good sound insulation;
• does not interact with the components of wildlife (fungi, bacteria);
• endures high temperatures environment;
• moisture resistance.

Technoelast is biostable.

Application area:

It is intended for the device of a waterproofing of buildings, constructions and building constructions.

Structure:

Technoelast is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.) to a glass or polyester base. Coarse-grained and fine-grained dressings, polymer films are used as a protective layer.

Specifications:

Rolls of material should be stored in a dry, closed area in vertical position in one row in height at a distance of at least 1 m from the heaters.

Brands:

Depending on the type of dressing and application area, Technoelast is produced in two grades:

Technoelast K- with coarse-grained dressing on the front side and a polymer film or fine-grained dressing on the deposited side of the web; used for the device of the top layer of waterproofing with protection from sunlight;

Technoelast P- with fine-grained dressing or polymer film, or a combination of them on both sides of the canvas; used for the device of the lower layers in the multilayer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.

EPP

HPP

EKP

TCH

Material specification table:

Manufacturing jobs:

According to the "Guidelines for the design and installation of roofs made of bituminous materials by the TechnoNIKOL roofing company", it can be used in all climatic regions according to SNiP 23-01.

TechnoNIKOL Corporation offers modern Construction Materials, corresponding to Russian and European standards qualities, which include roofing roll materials, waterproofing mastics, bitumen, materials for polymer roofing.

Technoelast- group modern materials designed for arranging roof structures and for waterproofing various elements of buildings for various purposes. This is one of the most popular and sought-after multifunctional materials for protecting buildings from negative impact climatic and natural phenomena, exposure to moisture and significant temperature changes.

Structure of Technoelast

Currently, Technoelast is produced in a special technological cycle by applying a special bitumen-polymer coating on a reliable polymer base on both sides. The coating consists of butadiene-styrene thermoplastic elastomer, bitumen and filler. For the final protective layer, as a rule, coarse-grained or fine-grained natural dressing, as well as a polymer film, are used.

Technoelast grades

Brand "K"«

With coarse-grained dressing on the front side and fine-grained dressing or polymer film on the welded side - used for the top layer of the roof.

Mark "P"

With a polymer film or fine-grained dressing or a combination of them on both sides of the material - used for the installation of the lower layer of the roof and waterproofing of tunnels, foundations and other building structures.

In our company you can purchase Technoelast:

• pickup from manufacturers (Ryazan, Voskresensk, Rybinsk);
• with delivery to your facility both in Moscow and in the regions;
• pickup from a warehouse in Moscow.

Technoelast EPP

E - polyester, P - film, P - film

Technoelast EPP- one of the most versatile and popular waterproofing materials.
The basis of Technoelast EPP is one of the most reliable - it is polyester, which has high strength and elasticity.
Technoelast EPP used on pitched roofs .

Characteristics Technoelast EPP

• Heat resistance not less than 100 °С (within 2 hours);
• Flexibility on a bar R=25 mm, at a temperature of -25 °C;
• The material thickness is 4mm;
• Protective coating: super melt film on both sides;
• The mass of the binder component averages 4.5 - 5 kg;
• Base: polyester.

Technoelast EPP capable of handling difficult climatic conditions. At the same time, the service life of Technoelast EPP is more than 25 - 30 years. This can be achieved with quality installation.

Technoelast EPP in most cases can be safely recommended for use. Technoelast EPP It is not recommended to use together with materials that do not have a polyester base - the properties of polyester will not be fully used.

Features of the composition of Technoelast EPP

The material owes its increased elasticity to the durable and reliable polyester included in its composition, on which a special bitumen binder is applied (in addition, SBM thermoplastic and non-toxic fillers are included in Technoelast EPP to give the material frost resistance down to -30 ° C, heat resistance, and extend the service life material up to 30 years). The use of two layers of EPP in Technoelast protective film, protects the material from sticking together, speeds up and facilitates the work of installers during roofing work. This is due to the fact that when fusing, burning, the film heats up the surface of the roofing more evenly and quickly.

The main scope and application of Technoelast EPP

They use high-quality and durable Technoelast EPP as a preparatory layer during the arrangement roll roofing. The presence of polyester in the composition of the material allows it to withstand significant loads, while maintaining excellent waterproofing properties. Technoelast EPP is also recommended for waterproofing basements, foundations, spans of bridges, swimming pools and other hydraulic structures.

Before applying the material, careful preparation bases, clean it from debris and dirt. Cracks, ruts and chips close up cement mortar and sanding. The prepared surface is primed with a bitumen primer to maximize the adhesion of the material to the surface. Weld the insulation with gas burner with an overlap (approximately 100 mm). When welding, it is necessary to avoid overheating of the material.

Technoelast HPP

X - canvas, P - film, P - film

Material structure Technoelast HPP:

Basic indicators:

flexibility of the material on the beam (R) - 25 mm (not lower than - 25 0 C);

brittleness temperature of the bitumen layer up to - 35 0 C,

heat resistance + 100 0 C.

Technoelast HPP can be laid at temperatures up to -35 0 C, when using material below this temperature, the brittleness in bending will increase. Roofing waterproofed with Technoelast serves well in any frost.

If you need to make high-quality waterproofing of the roof and, in addition, save money on this, then Technoelast HPP is what you need. For effective waterproofing of the roof, it is necessary to use Technoelast HPP (bottom layer on fiberglass) in combination with Technoelast TKP (top layer on fiberglass).

Breaking strength of fiberglass

Technoelast HPP with fiberglass backing is weaker in tensile strength compared to technoelast based on fiberglass or polyester. However, this does not affect the main characteristic qualities- they stay on the same level.

Main parameters of Technoelast HPP:

Application of Technoelast HPP

Technoelast HPP is used as the bottom layer roof waterproofing(used as a lining material) in combination with Technoelast TKP and waterproofing various designs in construction to prevent the penetration of moisture into them, such as:

• roof;
• interfloor office floors;
• foundation (along the horizon);
• bathrooms (waterproofing);
• pools and tanks with a protective layer;
• boiler rooms, engineering communications (waterproofing).

Laying Technoelast HPP

At the first stage, we prepare the base for surfacing. To do this, it is necessary to initially repair all large cracks and chips. bituminous mastic, then treat the surface of the base with a bituminous primer. After the primer has dried, we determine the layout map of Technoelast HPP, cut the material and make cutouts at the installation sites of hatches, lanterns, funnels, etc. Having rolled Technoelast HPP back into rolls, we proceed directly to surfacing.

Technoelast EKP

E - polyester, K - crumb, P - film

Used for the top layer of the roofing carpet

and has a durable and elastic polyester base.

Characteristics of Technoelast EKP:
- Flexibility on the beam R = 25 mm, not higher than - 25°C,
-Heat resistance + 120°C,
- The brittleness temperature of the bitumen layer is up to -35°C (this means that Technoelast can be used in work up to a maximum of -35°C, with the highest indicated temperature the material becomes more brittle when bent).

A fully finished roof perfectly performs its waterproofing functions in any frost.
EKP technoeplast has an increased quality of modified bitumen (it is elastic), technoelast EKP excellent quality of the upper protective layer, and its base consists of one of the most durable and elastic materials - polyester. It is used together with lining material - EPP technoelast.
Polyester - in its properties is not inferior, but even surpasses such material as fiberglass, which is also used for the base. And unlike fiberglass, polyester does not rot. Outwardly, it resembles foamed white polyethylene.
A distinctive property of polyester is its ability to stretch up to 60%, this elongation effect is absolutely indispensable in those structures that are subject to movement.

Technoelast HKP

X - fiberglass, K - crumb, P - film

Technoelast brand HKP is a multifunctional SBS-modified, built-up roofing material of increased reliability, which is designed to insulate the top layer of the roof in all climatic regions with increased requirements to safety.
Technoelast is produced by applying a bitumen-polymer binder on both sides of a fiberglass base, which includes bitumen, SBS thermoplastic and fillers, with further application of protective layers from above and below.

Characteristics of HKP technoelast:
- The basis of the material - fiberglass;
- View of the protective layer - from the front side - coarse-grained gray slate bedding, from the bottom side of the roofing sheet - polymer film;
- Breaking force in tension - not less than 294 N / 50mm;
– Heat resistance not lower than 100 °С;
– Binder brittleness temperature not higher than -35 degrees C;
- Weight 1 sq.m. - 5.0 kg;
- Water absorption during the day - less than 1% by weight;
- Length - 10 m;
— Width — 1 m; thickness 4.2 mm;

Technoelast TKP

T - fabric, K - crumb, P - film

The material has a rather pleasant-looking front surface. gray color.

Characteristics of technoelast TKP:
- Heat resistance for 2 hours, not less than 100 degrees Celsius;
– Flexibility on the beam R=25 mm, at a temperature of -25 degrees Celsius;
- The basis is fiberglass;
— The thickness of the top layer is 4.2 mm;
- Topping: gray slate.

Technoelast TKP on a fabric basis is used when installing the top layer of the roofing carpet on flat roof. SBS-modified, waterproofing build-up material. Technoelast TKP is used when it is necessary to ensure increased reliability of roof waterproofing. Technoelast TKP is recommended for use on substrates not subject to mechanical and thermal deformation. The material is characterized by high strength, but low elasticity.
Technoelast TKP is the most durable top layer in the line of bituminous deposited materials. Slate dressing is used as protection against ultraviolet exposure to its base.
Fiberglass is used as the basis for the polymer-bitumen binder - the most durable but inelastic material. Technoelast TKP is second only to Technoelast EKP in terms of reliability.

Recommendations for the use of Technoelast TKP
We recommend using Technoelast TKP as one of the most reliable and durable materials for the upper waterproofing layer in multi-layer structures on a solid roofing base, for example over a cement-sand screed.
The material can be used together with Technoelast TPP or KhPP (more economical option).
At overhaul old roof, it is possible to use Technoelast TKP directly on the base, without the use of the lower waterproofing layer.

Technoelast, like most welded roofing materials, consists of:

• bases (fiberglass, fiberglass or polyester) - ensures the durability of the roofing;
• sbs-modified bituminous binder that increases performance characteristics material;
• polymer film with the manufacturer's logo on the underside, which protects the canvas from mechanical damage, gluing the turns together, as well as serving as an indicator of sufficient heating during the deposition of the material;
• polymer film on the upper side (in the case of the lower layers of the material) or gray slate dressing designed to protect the bituminous binder from ultraviolet radiation and mechanical damage during operation.

Technoelast differs from other materials for soft roofs more sophisticated technology production and the quality of the materials used. The artificial rubber added to the bitumen provides elasticity when low temperatures and heat resistance at elevated temperatures. The reinforced base is not subject to decay and retains strength characteristics throughout the period of operation.

Relatively high price for waterproofing Technoelast is compensated by improved technical parameters:

Technoelast is marked with three letters, which mean:

• the first is the type of base: E - polyester, X - fiberglass, T - fiberglass;
• the second - the type of coating of the upper surface: P - polymer film, K - coarse-grained shale dressing;
• third - coating material with inside: P - polyethylene film.

Application

Technoelast is designed for waterproofing:

• roofing;
• interfloor ceilings;
• foundations;
• basement walls;
• underground tanks;
• pools;
• main pipelines;
• other building structures and structures.

For the device of the lower layers roofing cake Technoelast is used, both sides of which are pasted over with a film, for the upper layers - material with a film on the bottom and with slate chips on top.

Technoelast has the following advantages:

• absolute water tightness;
• high tensile strength - Technoelast based on polyester and fiberglass is stronger than similar budget materials by 15%;
• durability - the synthetic base is not subject to decay, bitumen is not afraid of exposure to chemically active substances, mineral chips reliably protect Technoelast from ultraviolet radiation;
• the possibility of operation in any climatic zones - Technoelast withstands temperatures up to +100 ° C;
• simple laying technology, the ability to perform work in the winter;
• affordable price — Technoelast is cheaper than most roofing materials.

It is profitable to use Technoelast. Budget roll materials serve up to five times less than Technoelast, their price per m 2 is only 2 times less.

Technoelast from Ant-Snab

If you decide to buy Technoelast in Moscow from Ant-Snab, the price will pleasantly surprise you. We work without intermediaries, we get Technoelast directly from TechnoNIKOL factories. Discounts are available for bulk purchases. Payment can be made in cash or by bank transfer.

To buy Technoelast from Ant-Snab, you should:

• choose the brand of roofing that meets the conditions of use;
• calculate the need for materials on the online calculator available on the site;
• fill in the order form;
• agree on the terms of payment and delivery;
• if you have any questions, call our consultants.

Delivery by company transport is carried out within 1-3 days after placing an order within the Moscow region. By prior arrangement, it is possible to unload goods and rise to the floor. To take out roofing materials independently, you should agree on the date of shipment and the method of payment. Come. Call. We are waiting for your orders.