Fences for currant bushes. Bush holder for fruit and berry bushes Cut for bushes from a pipe
5918 09/18/2019 6 min.The need for fencing and tying currant bushes arises 4-5 years after planting the seedling. By this time, the bush has already formed more than 20 shoots, which are actively growing and at the time of fruiting begin to touch the soil. This situation negatively affects both the crop and the shoots themselves. As a result of contact with wet soil, fungal diseases can begin to develop, and pests that live in the soil spread to the green part of the bush.
This can be avoided by simply tying or fencing. Such events not only protect the culture, but also contribute to the formation of the correct shape of the crown, and also give the entire backyard a beautiful aesthetic appearance.
Requirements for holders
Not only the appearance of the plant, but also its development depends on the choice of the design of the bush holder, therefore a number of requirements are put forward for this type of device:
How to DIY
Many gardeners do not buy shrub fences, preferring to make them with their own hands, or use them. At the same time, they can choose not only the optimal design, but also choose the materials and design they need.
It is not difficult to make a bush holder on your own, especially since there are more than enough materials for its manufacture.
Pipe supports
Metal, plastic or polypropylene pipes can be bought at any hardware or plumbing store. Read also about grafting currants on cherries.
Often, zealous owners also have old materials after a major overhaul of a house or cottage. All this can be used by making original, durable, and most importantly, inexpensive bush holders for currants.
Plastic
With the help of plastic pipes, you can make a simple, reliable and quite aesthetic design. For this you will need:
- fiberglass reinforcement 4-5 mm thick (4-5 m long);
- plastic pipes cut into 7 pieces of 0.5 m each;
- plugs for pipes.
Holes are drilled in each of the 7 supports at a distance of 4 cm from the edge, through which fiberglass reinforcement is threaded. The supports are evenly installed around the entire perimeter of the shrub, the reinforcement is aligned parallel to the ground, and the pipe openings are closed with plugs. Everything is simple and fast. Learn about green currant varieties.
Polypropylene
Lightweight and inexpensive polypropylene pipes can also be an excellent fencing material. To build a support you will need:
- 4 corner "tees";
- 4 - 4.5 meters of plastic pipes of medium diameter.
The pipe section is divided into 8 parts of 50 cm each. Further, with the help of “tees”, the structure is assembled into a cube without a base.
The height of the stand can be adjusted to your preference, however, this will affect the amount of starting material.
For greater strength, the attachment points are glued with hot glue or fixed with screws. Such a bush holder will last a long time and will not spoil the appearance of the bush.
metal
Fences made of metal attract with their strength. They are more durable and reliable. In order to make such a device, it is necessary to prepare 4-5 scraps of metal pipes 45-50 cm high, as well as slats, fittings or any other type of fencing.
Metal pegs are driven into the ground around the perimeter of the bush, and then slats or reinforcement are attached to them using self-tapping screws. The top of the pipe should be covered with a fitting so that moisture and dirt do not get into the cavity.
metal-plastic
Metal-plastic pipes are a universal material. It combines the reliability of metal products with the lightness of polypropylene. You can purchase green pipes, the fence of which will not be conspicuous. Learn about the best varieties of blackcurrant from.
For the manufacture of a bush holder from metal-plastic, it is necessary:
- hose (2 pieces of 10-15 cm each);
- metal-plastic pipes (4-5 m);
- screwdriver;
- screws;
- small pegs made of wood, matching the diameter of the pipes;
- hammer.
From a part of the pipe, 2 rings of the same diameter are constructed. It is allowed to manufacture an expanding structure. Then the diameter of the upper ring will be larger. The ends of the pipes are connected by pieces of a rubber hose. When choosing a hose, make sure that its diameter matches the diameter of the pipe, which must fit snugly into the hole in the hose.
Legs-racks 70-80 cm high are made from the residual part of the metal-plastic pipe. Up to 5 racks can be made for greater stability. Pegs-sleeves are inserted into the holes of the pipes, on which the first ring-hoop is attached with a screwdriver. The second circle is fixed at a distance of 40-50 cm from it with shurpas. It turns out a fairly high stand, which reliably and firmly holds the side currant pagons.
Fences from pegs and branches
One of the simplest fences that you can make with your own hands is considered to be a bush holder from ordinary wooden pegs or branches. Both wooden and metal structures can act as a support. And they can be easily removed.
With iron base
The design, which is based on an iron support, is elementary in manufacture. For one such bush holder, you will need 4-5 metal rods or scraps of old pipes and twine. The rods are driven into the ground around the bush and tied on top with twine.
Wooden
This type of device is also very simple. 4-5 pegs of 60 cm are cut from a wooden block, and then evenly installed around the perimeter of the bush. From above, a flexible wire is attached to the supports, and preferably a thick twine, since it is not capable of injuring the branches.
Enclose bushes and branches of fruit trees in the form of spears. To do this, you need to pick up branches of the same size, drive them into the soil around the currant, and put even strong slats or the same branches into natural recesses. For greater strength, you can secure them with twine.
When working with wood, it must be remembered that it is subject to the influence of weather conditions, as well as insects, so the pegs and slats are treated with an antiseptic solution and varnished or painted. Such measures will significantly extend the life of wooden fences.
Purchased
You can buy bush holders today in any specialized store, hypermarket, and even on the Internet. Most often, metal and plastic structures can be found on sale. The range is wide not only in design and color, but also in shape, design and price. He will tell you about pruning red and white currants.
metal fences
Metal bush holders enjoy a well-deserved reputation for reliable and durable fences. They vary in height, the number of supports and the shape of the base. The latter can be round, square or rectangular. Round fences are the most popular as they are easy to work with and follow the natural shape of the bush. As for color, black, green and gray designs are most in demand. Special coating protects products from rust and moisture. Read about planting currants in the fall.
Special mention should be made of forged bush holders. Most often they are made to order in order to support the overall landscape design of the site. They are more expensive, but also look more original and spectacular.
Plastic coasters
You can also fence the bushes with plastic props. They are lighter and often presented in a collapsible form, so that they are more convenient to transport. As well as metal, plastic fences are most often green and black. They are easy to assemble, cheaper in cost, but also less reliable. Also, they do not take up much space, so other cultures are possible.
If the service life of metal products reaches several tens of years, then plastic products at most - 6-8 years.
Benefits of using
The use of fences allows not only to save the crop, but also gives the shrub the opportunity to develop correctly. Similar designs have long been used by gardeners, due to the advantages, such as:
- aesthetics(the bush does not lie spread out on the ground, but maintains a neat shape);
- ease of harvest(no need to lift each branch in search of a bunch of currants);
- preservation of berries(without constant contact with wet soil, rot does not develop);
- uniform growth up, not to the sides;
- damage minimization from heavy rains and strong winds.
Video
Video about a bush holder for currants.
conclusions
- and bush holders must be strong and securely fix the bush.
- Supports protect the crop from death and the bush from disease, form a crown and set the direction of growth.
- Fences made of metal are more durable than those made of plastic and wood, but also more expensive.
- You can make any design for the fence yourself, spending a minimum of material and time.
- When making supports from wood, do not forget about the special processing of wood.
Decorative fences give the suburban area an original and well-groomed look. With their help, it is convenient to divide the area into thematic zones. And it’s easy to make simple fences for bushes and flower beds with your own hands.
Classic fencing materials
Beds, flower beds, front gardens are not a new trend of the times, but have long been an integral part of a suburban area. The territory, divided into zones by decorative fences, looks beautiful, which helps the beds and flower beds to keep their shape after rains, prevent the spread of weeds, and retain moisture. Neat shrubs are pleasing to the eye, the branches of which are raised, and do not tend to the ground. And the vines, fixed on the trellises, complete the pleasant picture. Usually, materials left after construction work are used on the sites, or affordable ones are bought.
Fences give the site a neat look and help divide the area into thematic zones.
Wooden fences
Wood is an affordable building material. Any of its types are used - boards, logs, timber, slabs, even cut branches. Palisades, picket fences, wickerwork, hedges adorn many household plots. Wooden structures give a feeling of closeness to nature, easily fit into any landscape, and are easily repaired. The material lends itself well to processing, so the fences can be made independently. When choosing a tree, you need to take into account that you have to fork out a little for special tools for treating insects, fungus, etc.
Wood products exposed to air are subject to drying out and rotting. But if the material is processed in time, then these disadvantages can be completely avoided.
brick fences
New or old bricks are widely used to create bumpers. The main requirement is to choose a size sufficient to dig into the ground, and at least one whole corner without chips. The brick is dug in diagonally with "teeth", then covered with lime or paint. It turns out a strong, reliable and beautiful frame for the garden. Also, bricks are dug in vertically, laid horizontally around low flower beds, and whole compositions are built with cement. But if you do not have the material left after the construction or dismantling of the old building, then even building a medium-sized flower bed will not be a cheap pleasure.
If you use the material left after the analysis of the old brick wall, the fence for the flower bed will turn out not only beautiful, but also cheap.
Products from flat and wavy slate
The material has all the properties of ordinary stone: durable, insensitive to moisture, does not burn, is durable, and is not subject to various destructions. Even if you do not have an old slate, then this is not a problem. You can buy it at an affordable price. A color version has appeared on sale, and there is no need for a separate painting. To form a bed, it is enough to dig the sheets into the ground to the desired depth, depending on how high the side is required.
- after heavy rains, the fence may warp and need to be corrected;
- at high temperatures, the earth in such beds dries out faster due to the low thermal conductivity of slate.
These shortcomings are easy to fix. To strengthen the sides, it is necessary to drive in metal pegs around the perimeter of the structure and do not forget to water the garden more often on hot days.
Video: how to make a bed of flat slate
Natural stone fences
The structure, made of stones and cobblestones, looks very impressive and natural. To achieve such naturalness, you need to try, fitting the elements to each other in shape, selecting them in size and fastening with a solution. The only disadvantage of such a structure is that the heavy material sags over time, so you have to restore the bed.
Original fences for flower beds can be built from flat or voluminous natural stone of different colors
metal fences
Trimmings of iron pipes and rods have always been used in suburban areas:
- short ones are used as supports for the sides of the beds;
- medium trimmings, interconnected by ordinary wire, perfectly lift heavy branches of shrubs;
- long ones work well as pillars for trellises when tying raspberries and grapes.
Borders for garden beds are made from thin sheet iron. But in the ground, this material rusts and corrodes. If you use metal structures with a polymeric and galvanized coating, then the curbs will last for decades. The only drawback is the high price.
Photo gallery: fence options from different materials
The original solution - a flower bed of horizontally fixed boards installed in several tiers 
A wicker flower bed will give the site an original and distinctive look. 
Another interesting solution for the site is a flower bed made of driftwood. 
A wooden square on four props is the most common type of fencing for sprawling shrubs 
The good old classic - a diagonal brick border - an excellent solution for fencing flower beds 
From bricks laid horizontally and fastened with cement mortar, fences of any height and shape can be created. 
The minimum amount of money, time and effort with maximum benefit - slate beds 
Natural stone fences give the landscape a natural look 
From sheet iron make bumpers for flower beds
Video: beautiful garden fences
Modern options for decorative beds, borders, fences
Plastic is one of the most attractive modern materials for garden fences. It does not need special care, is easy to install, strong and durable. But when buying, you need to require certificates to ensure environmental safety.
Flexible curb tape
A plastic sheet with a wavy surface of green or brown color has a height of 20 to 50 centimeters. The advantages of curb tape are obvious:
- availability;
- simple installation with a minimum of tools: a large stapler, scissors, tape measure and scoop;
- it is easy to give the desired shape;
- does not rot, does not decompose in the soil.
The only, but significant disadvantage is low strength. The material is easily amenable to mechanical stress.
Video: how to decorate the beds with a border tape
Garden board and constructor
Another option for plastic bumpers is a garden board. It is durable, able to withstand heavy loads, has a smooth surface. Width - up to 15 cm, length - up to 3 meters. For ease of connection, the boards are equipped with special fasteners. A variety of colors allows you to collect bright, colorful compositions.
A kind of border tape - a garden designer. Outwardly, it looks like wooden blocks. Important advantages are the ability to vary the shape and size, as well as ease of installation. It is enough to connect the individual elements to each other with the help of fasteners and press the structure into the wet ground. Minus - high cost.
Video: how to assemble a garden bed from a garden constructor
Plastic bottles
If the plot is large, then the cost of landscaping it using flexible tape or garden boards will be large. This is where plastic bottles can come to the rescue. It is enough to pick them up of the same volume, for stability and strength, fill them with sand, dig upside down into the ground about half the height. If you use containers of different colors, it is better to install in a certain order. Then the border will look the most aesthetically pleasing. To add brightness, you can cover the resulting fence with water-based paint.
Plastic pipes are well suited for fencing large and small spreading shrubs. To lift all the branches and leave the berries clean, it is advisable to install specially designed holders around the plants.
Photo gallery: types of plastic fences
Flexible plastic tape ideal for decorating flowerbeds and beds 
The garden constructor is easy and simple to assemble and install, and the flexible connection of its elements will help to make a flower bed or garden bed of any shape. 
No need to throw away empty plastic containers: bottles can be used to build an excellent fence for garden beds 
The garden board is a very beautiful and easy-to-install border that looks like real boards. 
Plastic structures look aesthetically pleasing
Installation of flower beds and bush holders on the site
When choosing a material, it is necessary to rely not only on the advantages and disadvantages of the latter, but also take into account what future structures will be intended for, for which plants and for what purpose they are installed:
- to protect plants from children or animals, it is appropriate to make a high fence;
- for visual zoning of the site, a low rim is sufficient;
- a structure dug deep into the ground will help prevent the growth of roots;
- so that the branches of grapes and other climbing plants do not spread along the ground, a support is needed that will provide space for growth and high-quality ventilation.
How to make a flower bed out of plastic bottles
Plastic bottle fencing is the most affordable and easy-to-make option. Literally over the winter, you can collect such an amount of the necessary material that it is enough for more than one area. In addition to accessibility, it attracts the ability to give the sides any shape.
To make a fence, you will need:
- plastic container;
- rope (cord) and pegs;
- scoop or small shovel;
- sand (small pebbles, dry clay, etc.) for filling plastic containers;
- oil or water-based paint.
Operating procedure:
- Wash and dry bottles.
- Fill the prepared containers with sand (or other loose substance) to give strength and stability to the structure.
In order for the structure to be stable and durable, the bottles must be filled with sand.
- With the help of a rope stretched over pegs driven into the ground, outline the outline of the future flower bed. The shape can be different, and the width should not exceed 1 meter, in order to avoid difficulties with watering and weeding in the future.
The contour of the future beds is outlined with the help of pegs driven into the ground and a rope stretched between them.
- Dig a trench 8–10 cm deep along the outlined contour.
- Set the prepared bottles upside down as tightly as possible to each other.
- Pour soil into the flower bed to obtain the required height and fix the fence.
- Decorate the border.
Ivan Stoletov made a wide variety of tapestries and pergolas on his site, which perform not only decorative, but also utilitarian functions.
Shalers and pergolas are structures that are easy to make with your own hands, do not require much time and materials for construction, provided, of course, a rational approach to this issue. At my dacha participation, these designs made it possible to ensure order, make caring for plants convenient, and most importantly, they do not take much time to maintain them in working order.
TRELLIS- a special lattice along which a plant winds or to which tree branches are tied to give them a certain shape. PERGOLA(Italian Pergola from Latin Perqula - canopy, extension) - in gardening: a canopy of climbing plants to protect the passage or terrace from the scorching sun.
- The pergola near the summer kitchen forms a green corridor on the way to the greenhouse.
- Decorative vineyard on trellis at the entrance to the cottage.
- Wooden lattice hanging trellises on the kitchen veranda.
What to make trellises and pergolas in the garden?
Materials for the manufacture of trellises and pergolas can be very diverse - brick, concrete, metal, plates, wood. If there is a desire to do something similar with your own hands, first of all you need to determine the purpose of such a structure. For example, on my site (Fig. 1) there are several similar structures. Some of them are purely decorative: from the side of the entrance gate to the dacha, at the entrance to the house and in front of the kitchen shed. Others are intended for growing white sweet grapes or to hide outbuildings from view (near the summer kitchen) and as elements of arranging recreation areas. And there are also universal ones that combine all these functions - near the greenhouse, pool, kitchen.
Different designs of pergolas and trellises
Depending on the purpose, I made different pergolas and trellises, which differ in design. Firstly, these are high wind-resistant trellises of outdoor fencing along the road and at the entrance gate. I made them from metal racks and tension cables.
At the entrance to the house, I built a pergola using used drainpipes. Near the greenhouse and summer kitchen there are tapestries made of thin-walled galvanized profiles, as well as lattice wooden hinged ones. For raspberry and blackberry bushes, greenhouse plants and climbing roses, I made combined designs.
On hot summer days, a pergola successfully serves as a gazebo or a shady canopy over garden paths, where you can always enjoy the coolness. If the site is large, then several pergolas and trellises installed at different ends of the site will create a beautiful landscape. And openwork decorative lattices at any time of the year will be able to set others in a romantic mood and provide a good mood.
- Rice. 1. Scheme of placement of pergolas and trellises on the site: 1 - trellis of the external fence; 2 - trellises for white grapes; 3 - pergola at the entrance to the house; 4 - wooden gratings; 5 - supports for raspberry bushes; 6 - supports for blackberry bushes; 7 - temporary support for Jerusalem artichoke; 8 - trellis for climbing roses.
- Rice. 2. Arrangement of trellises for external fencing: 1 - fence posts made of steel pipes Ø 80 mm; 2 - extreme racks of trellises made of steel pipes Ø 40 mm; 3 - intermediate racks of trellises made of steel pipes Ø 25 mm; 4 - steel cables in a plastic sheath; 5 - lanyard; 6 - decorative cast-iron sections of the fence; 7 - plinth of a fence made of rubble stone; 8 - steel wedge.
- Grapes that have grown over the outer fence practically hide the trellises themselves.
- Cable tension on the trellis of the external fence with the help of lanyards.
Do-it-yourself site fencing
The trellis, installed on top of the outer fence, is very simple in design. Since the fence posts are made of metal pipes Ø 80 mm, I used them as a base, inserting trellis supports into them - steel pipes Ø 40 mm. To firmly fix the support pipe inside the fence post, I pinched it with a metal wedge (Fig. 2). The length of the supports is approximately 2.5 m. I pulled cables between the supports, the tension of which was provided with lanyards. I installed intermediate metal racks from pipes 0 25 mm in increments of about 3 m - this ensures the rigidity and stability of the structure and prevents the cable from bending.
Pergolas for white grapes
Compared to dark grapes, white grapes are less curly and grow less, and the yield is weaker, so it is less loaded on the trellises. This made it possible to use inexpensive galvanized light steel profiles for the manufacture of tapestries, designed for fixing drywall, and in order to ensure reliable resistance to strong winds (hurricanes also happen), he applied simple but reliable technical methods.
The rigidity and stability of the structure is ensured by metal roof girders, which redistribute horizontal loads to separate more powerful racks reinforced with steel pipes Ø 4 mm (Fig. 3). An important role is also played by the choice of the step between the racks (about 80 cm) and the reliable connection of the frame elements with self-tapping screws.
Pergola racks were installed in pre-dug holes 0.6 m deep, but not concreted, but covered with gravel and stones and rammed. It took me several hours to install these pergolas.
Rice. 3. Pergola device
from galvanized steel profiles:
1 - profile racks; 2 - horizontal crossbars; 3 - steel pipes 0 40 mm;
4 - self-tapping screw; 5 - transverse beams from a light profile; 6 - longitudinal runs from pipes and light profiles; 7 - stud with nuts.
Top view of a lightweight trellis-pergola located between the greenhouse and the utility room (separates the economic zone from the general one).
Pergola at the entrance to the house with their own hands
I made this support for plants (Fig. 4) from water pipes 0 25 and 40 mm, but I also use it as scaffolding, that is, scaffolding for house maintenance (if necessary, wash or replace the panels on the facade of the house). I concreted the bases of the racks in this design.
Temporary tapestries
I have sets of trellises for temporary use. I install them as needed and clean them in the fall. These are trellises for Jerusalem artichoke and individual bushes of climbing roses (Fig. 5). Jerusalem artichoke with a height of 3 m or more loses stability in strong winds and lies down on the lawn. To protect the Jerusalem artichoke from lodging, and the lawn from fallen plants, which eventually become moldy, I put up supports around the end of July, when the plants will gain a height of more than 2 m.
The design is simple and very convenient - it is a cable with loops at the ends, which I lift along two steel rods (something like a crowbar about 3 m high. The rods are driven into the ground at an angle of about 75 degrees, so when the cable is lifted, the necessary tension is provided. To to disassemble such a trellis, it is enough to hit the hinges with a hammer - and the cable itself falls to the ground.
Raspberry and blackberry
I made supports for raspberry and blackberry bushes from metal cables stretched between two horizontal guides (Fig. 6). The cables are stretched along each row of landings. Metal horizontal guides are attached to support pipes that take all the loads. All metal structures are made from used water pipes Ø 40 mm. Considering that my raspberry and blackberry bushes are tall, I pulled the cables in two tiers vertically for each row: in this case, the trunks and branches of both undersized and tall bushes are provided with support. Please note that it is necessary to securely fasten the end posts - drive into the ground to a depth of at least 1.2 m.
Greenhouse
The design of supports for plants in a greenhouse resembles the design of supports for raspberry and blackberry bushes - these are the same cables stretched between horizontal crossbars (Fig. 7) at the ends of the greenhouse. Steel pipes Ø 40 mm were used for the cross members. fixed at a height of approximately 2.2 m. At this height, they do not interfere with the passage and work in the greenhouse. The crossbars are attached with clamps to the powerful greenhouse posts in the corners.
I tighten the cables by tightening the nut on the tensioner bolt. If you loosen the cable tension, the tensioner can be moved along the cross member. This ensures the exact position of the cables over the rows of bushes of tomatoes or cucumbers. The garters of each bush made of strong thin rope are fixed on cables and serve as guides for plants.
Each cable is tied in two or three places to the metal truss of the greenhouse with a thin knitting wire. This prevents uneven deflection of the cable during fruit ripening, when the weight of the green mass of the bushes also increases significantly. I note that the height of tomato bushes reaches 2.5 m.
Summer kitchen trellises
Wooden hinged lightweight screens (Fig. 8) for the summer kitchen canopy I made from waste wooden lining. Screens here are not only a decorative design element: they serve as good wind protection and support for climbing plants.
It took me several hours to manufacture and install all the decorative grilles. I sawed the lining boards into two equal planks 5 cm wide. I connected the diagonal and framing planks with nails (screws). To protect against atmospheric precipitation, all wooden elements were covered with protective varnish-based impregnation. To the details of the canopy (beams - at the top, cast-iron fence - at the bottom), the trellises were fastened with mounting metal tape and hooks made of 6 mm wire.
Rice. 4. Pergola at the entrance to the house: 1 - fence post; 2 - pergola stand from a pipe 0 80 mm; 3 - longitudinal run; 4 - pergola beams from pipes 25 mm.
Rice. 5. Collapsible support for Jerusalem artichoke: 1 - steel reinforcement 30 mm; 2 - cable.
Rice. 6. Scheme of supports for raspberries and blackberries: 1 - stand made of steel pipe Ø 40 mm; 2 - crossbars made of steel pipes 40 mm; 3 - cables in a plastic sheath; 4 - turnbuckles.
Rice. 7. Arrangement of a frame for tying plants in a greenhouse: 1 - cross member made of steel pipe Ø 40 mm; 2 - cables in a plastic sheath; 3 - device for cable tension; 4 - crossbar of the greenhouse frame, used for a suspended structure made of cables; 5 - a suspension from a knitting wire.
Rice. 8. The device of a decorative lattice for a canopy of a summer kitchen: 1 - strips 50 mm wide; 2 - piping of a lattice of slats 50 mm wide.
Tapestry for climbing roses.
Flowers
For tall climbing roses, I use several types of trellises. The most popular is a trellis, consisting of racing aluminum tubes (waste after the reconstruction of the greenhouse). A plastic mesh is attached to them, to which I tie the plant.
In conclusion, I will say that I made all the designs based on purely practical considerations. They do not pretend to a special design, but nevertheless, in spring and summer, the entire site turns out to be green, not inferior in design to estates with expensive branded structures.
The process of growing currants in your summer cottage is a rather laborious task. It would seem that there is nothing complicated in each of the stages of caring for this plant. Nevertheless, if you do not provide everything correctly, and if you completely bypass some requirements, you are unlikely to have to count on a generous harvest. Particular attention should be paid to the formation of bushes of a berry plant. Most domestic farmers at the present stage use special props for currants. They come in different types, so you should take a closer look at which one will be the best option for you.
Why do you need support for bushes
Currant on a trellis is a shrub, the direction of growth of shoots of which sometimes needs to be adjusted. For example, the plant develops quite normally, but during the period of formation and ripening of berries, the branches begin to sag under their weight. In this case, it is necessary to take care of the currant bushes and build a special support for them. And not only currants need such a "maintenance" of shape. This kind of framework is also used for other shrubs: raspberries, viburnum, blackberries, gooseberries. Sometimes they are used to create a neat shape for bushy flowers (roses or peonies).
If we consider in more detail the key advantages of adaptation, the compactness of plants can be attributed to those in the first place.
The presence of a backup will allow you to significantly save space in the garden. In addition, a fairly important advantage is also the correct formation of the crown of plants. Therefore, a bush holder for currants is a necessary device that every gardener will certainly appreciate.
Benefits of a currant prop
Why is it worth using bush stands in gardening? With their help, you can arrange the bushes correctly. As a rule, farmers use such devices, as this provides several advantages at once:
- branches of shrubs grow upwards and do not "spread out" on the ground. In this case, the plant will continue to fully develop, but will not grow randomly. You get a decorative look of a shrub, and in the future it will be much easier for you to harvest from it. In addition, in the autumn period, you can cultivate the soil around the bush without any problems;
- berries ripening on currant branches will not go down. That is, you will eventually collect clean fruits, and they will not rot, which often happens when berries touch wet ground;
- the harvesting process will be greatly simplified;
- much less damage to shrubs can be caused by heavy rains or strong winds.
The benefits of currant top dressing will certainly affect the decision of an experienced farmer. The main thing is that your efforts are not in vain, so it is very important to purchase a backup or build it at home. We are talking about yield indicators and the health of currant bushes, so you have something to worry about.
5 ways to make your own hands
Do-it-yourself props for currants are not too difficult to make. Of course, such devices can be freely purchased in specialized stores. But why spend extra money if you can easily build an equally effective frame at home? The main thing is to understand the main varieties of these items, as well as determine which of the stands will be the best option specifically for your currant bushes.
It is considered quite simple to implement the method of making a stand from wooden pegs. If you follow all the recommendations of experts correctly, such a device will become your faithful assistant for at least several years. Pegs must be driven into the ground around the bush. Use 4-5 pieces. Next, a wire or strong twine is attached to the resulting supports. Another similar method is the use of horns. They are driven in around the shrub, and then even branches are placed on top. Very often, strong branches cut from a fruit tree are also used as spears.
Metal coasters are considered to be in demand among experienced gardeners. To do this, use scrap metal pipes. They play the role of pegs: they are driven into the ground, and then slats are attached to this structure. All this is ultimately fixed with self-tapping screws. A plastic support for currant bushes is also widely used. It is durable and at the same time it has a decorative appearance.
You can also apply in gardening, it would seem, spoiled solar lanterns. Using this material will allow you to build a completely stable structure, but it will not work for too large loads. However, if you need to support young currant bushes, the plastic construction is a good solution.
The most decorative and at the same time strong enough is a support made of metal-plastic pipes. They are recommended to be cut into three identical parts. The rest of the material is converted into two circles. It is best to purchase green pipes: in this way, the design you have made will merge with the green foliage of the currant. Remember: currants on a homemade trellis are a great solution for any gardener.
Video “Supports, supports, garters for garden shrubs”
From this video you will learn how to make high-quality supports, supports and garters for garden shrubs on your own.
To maintain the bushes in the summer cottage, special fences are used. They are intended for plants such as currants, raspberries, viburnum, blackberries, gooseberries, as well as bushy flowers - roses or peonies. Thanks to this fence, the bushes have a more compact neat appearance, and the crown of plants is formed correctly.
An example of a homemade fence stand for currant bushes
Benefits of using bush stands
In addition, the designs of fences for bushes are simple and can be done by hand.
Ideas for creating bush holders from improvised means
Coasters for currant bushes are presented on the market in a fairly wide range. In finished form, they appeared relatively recently.
But amateur gardeners have long been using fences for bushes from various improvised materials.
Some ways to create bush holders are very simple and do not require much time and complex equipment.
Fencing with pegs and twine
Four pegs are hammered along the perimeter of the bush so that about 50 cm is left above the ground (more pegs can be installed). Twine, twine, wire or any suitable material is tied to the first support.
A variant of the device for fencing from pegs and twine
The branches are lifted and the twine is tied to the next peg. The rest of the racks are tied in the same way.
Tip: The rope can be replaced with thin bars. In this case, a beam is attached between the pegs to the screws.
Stand for bushes from spears and simple branches
Four horns about 70-80 cm long are driven around the bush. Rogatins can be made from branches of fruit trees. On top of the clogged horns, you can put even branches.
Fence with iron base
The most durable and strong will turn out. It is not difficult to make such a bush holder with your own hands. Four steel pipes are driven in along the perimeter of the bush, a suitable bar, a piece of wood, is hammered into the pipe hole from above.
An example of a homemade metal fence
Further, narrow boards or a beam with a small section are attached to the bars with the help of self-tapping screws.
Fencing for currant bushes made of plastic pipes
You can make fences for shrubs from the following materials:
- fiberglass reinforcement from 4 mm - about 4 - 5 m;
- plastic pipes - 4 m;
- plugs for pipes - 7 pcs.
Stages of work:
The design is quite strong, durable and has a presentable appearance.
Shrub holder made of metal-plastic pipes
A reliable and simple stand for currants can be made from metal-plastic water pipes:
For work you will need:
- metal-plastic pipe;
- self-tapping screws;
- a piece of flexible hose;
- pieces of wood;
- hacksaw;
- screwdriver;
- hammer.
Assembly steps:
Another option for a bush holder made of pipes
Another way to make a bush stand allows you to assemble the structure without screws, but you will need a soldering iron for polypropylene pipes.
Wooden shrub fences
A simple do-it-yourself square stand can be made of wood. For work, it is better to use a bar with sections of 1x2, 1x3 or 2x2 cm.
- From a wooden block, you need to make blanks of 4 pieces of 60-70 cm each. Sharpen the lower ends of the bars.
- Four more strips of the same length are cut out of the timber - 1 m.
- Pointed racks are installed around the bush, slats are screwed to the upper ends of the bars.
Needs to be painted or varnished to extend its life.
An example of a wooden fence for currants
Buy coasters for bushes
Stands and fences for bushes are presented in a wide variety, and these practical products are in good demand.
Metal fencing for bushes
Made from powder coated steel. They can be of various colors and configurations. Forged metal fences look especially beautiful.
Scheme of the device of a metal holder for a bush
the most durable and have a number of advantages:
- presentable appearance;
- anti-corrosion protection;
- high stability and ability to withstand heavy loads;
- easy assembly with your own hands;
- metal products can not be removed for the winter;
- durability.
A steel bush holder can be bought from 350 rubles. Wrought iron coasters will cost a lot more.
