DIY crafts at home from plastic bottles. Crafts from plastic bottles: basic ideas and options for using household plastic (90 photos). Master class from plastic bottles. Mobile phone holder
Plastic bottles can breathe a second life into a garden plot.
Plastic bottles are readily available and inexpensive. In addition to the direct purpose, there are many incredible options for their use. Plastic as a way of decorating was to the taste of those who like to build something with their own hands. And this is not surprising - products made from it are quite durable, the bottle body bends effortlessly, the strength of the material is also pleasing. With your own hands and without problems, you can make incredible crafts for a summer residence, a garden, a front garden and an ordinary living space. So, the main task is to collect as many colorful and different-sized plastic bottles as possible, and the rest is fantasy.
Bottle and tire sun
Wasps from plastic bottles
Peacock from plastic bottles
Wasp and bottle flowers
Palm from plastic bottles instruction
It is important to know that most tree-related plastic bottle crafts follow a similar pattern. In the work you will need - a plastic bottle, scissors, paint for plastic and wire. The execution of the palm tree takes place using the middle and lower sections of the dark-colored bottles, it is advisable to make foliage from green bottles. The next similar bottle is inserted into a plastic bottle with a cut bottom until the required height is formed. All elements are strung on a wire passing through the neck, the neck of a green bottle without a bottom is attached to the top. Further, strips of green plastic are cut in equal parts and lean to the bottom, imitating palm foliage.
Palm tree with sharp plastic leaves
Bottle palms in the country
Bottle palm with flat leaves
A simple palm tree made from plastic bottles
Thus, three or more palm trees made from such improvised material as plastic bottles can decorate any suburban area and garden. This element of decor will delight the eye all year round, rain, snow and wind are not afraid of it. If there is a baby in the house, do not forget to melt the cuts on the bottles. In addition, do not be afraid to involve the baby in joint work. Most likely, he will gladly respond to help.
Original and bright flower beds in the garden from plastic bottles with your own hands
It is very easy to create useful trifles and landscape works from plastic bottles for summer cottages, including flower beds, gazebos, supports for greenhouses and canopies, frames for climbing plants, etc.
Flower beds made of plastic bottles are quite common not only among amateur gardeners, but also just near high-rise buildings. To make a flower bed, you need to pick up plastic bottles of the same shape and color. If you have time and desire, you can decorate them both in one color and using a whole palette. To design the borders of the flower bed, it is enough just to dig containers along the perimeter to a sufficient depth. The result is an original fence.
Flowerbed sun with borders
Fencing a flower bed or garden
Making a flower bed out of bottles
Flowerbed decor from plastic bottles
Cache-pots and pots for outdoor flowers from plastic bottles
Also, plastic bottles can be used as table and hanging pots. If you cut off the bottom of the bottle, a cylindrical planter will come out, when using the upper part, you will get a cone-shaped one. If such pots are decorated with colored corrugated paper, fabric, yarn, or simply decorated, an unforgettable element of the interior will appear. Slightly heated plastic will be easy to give absolutely any shape, this makes it possible to create the most unusual flowers.
Cache-pot from plastic bottles
Hedgehog from grass and a bottle
Flowerbed-swan from bottles
Reindeer team of bottles and tires
And here is a video of ideas on how you can use bottles to decorate the garden and in order to make it more functional:
Arbor from plastic bottles in the country - elegant and comfortable
If there is a need to build a gazebo, supports for climbing plants, greenhouses, you should stock up on a large number of identical plastic bottles, as well as patience, imaginative thinking and ingenuity. The arbor is fastened with small screws. If whole containers are to be used, it is advisable to fill them with sand or earth in order to add reliability. If a frame is being made, do not overload it unnecessarily. Fabric or other light protective fabrics attached to bottles to decorate the side parts will look good.
house made of bottles and wood
Canopy from plastic bottles
Arbor from plastic bottles
House of cement and bottles
Decorative country curtains from plastic bottles
Curtains made of plastic bottles on windows or in doorways are an interesting design solution. To create them, you will have to take a large number of these same plastic bottles - in direct proportion to the size of the window (or doorways). Cut off bottoms from containers (of low height) must be connected to each other. A fishing line or thin wire is suitable as a fastener. An unusual composition of bottles will turn out if you take bottles of various sizes and colors. If there is a desire and time, a curtain made of transparent identical bottles, painted with acrylics, will create an unforgettable feeling.
Decorative bottle curtains
bottle bottoms
Curtains in the bathroom from plastic bottles
Bottle bottom curtains
DIY animals, birds and insects from plastic bottles
Not everyone is happy with real animals, birds and insects in the garden. Indeed, who will like it when a mole digs in the garden, a live wolf or a bear wanders, owls fly or mosquitoes and wasps attack. But bright crafts from bottles can easily decorate your dacha. More ideas for animals and birds from plastic bottles in this article.
Animals from plastic bottles with a photo
Making crafts from bottles is not at all difficult, anyone can find the material in any quantity, and multi-colored paints will give life to crafts. Therefore, the main problem that may arise before you is what exactly to do? Why not animals? Here, for example, cats, mice and penguins made to decorate the site:
Piglet from plastic bottles - step by step instructions
The easiest way is to make various animals from plastic bottles. For example, you can make bright pink piglets like this and put them in your garden for decoration:
All you need is either a large five-liter plastic bottle for the pig's body and a few regular bottles for the legs and ears. Here are instructions on how to do it:
After the pig is ready, all that remains is to paint it pink. You can do several different crafts. Here are a couple more photos for you:
DIY bottle birds
Or maybe put some bird in the garden? Why not make funny crows and place them on an apple tree branch? Or make a penguin with a chic tail that you can put in a clearing or under a tree. You can also make an owl and attach it to a fence or near a tree hollow in the garden, or yellow ducks that you can use to decorate a pond, also made by yourself.
Swan from plastic bottles - simple instructions for making
And of course, the most popular bird, which is often made from bottles, is a chic snow-white swan. There are several options. The simplest one is to paint the bottles white and stick the neck into the ground, forming the contour of the swan's body - at the same time it will be a fence for a miniature flower bed, inside which you can plant any colors. What else to make a fence for flower beds and beds - read the link. After that, it remains to make the neck and head of the swan - from the same bottles, from papier-mâché, corrugated tube, plaster or other materials, and this is what we get:
But there are more complex ways. For example, you can make the frame of the body of a swan, and on top of the feathers from plastic spoons - they are already white, so you don’t even have to paint. Or cut openwork feathers from bottles - long, dreary, difficult, but the result is really worth it, it’s not a shame to send such a craft even to a competition. And do not forget to create a pair for the bird: you can make a white and black swan.
And here is a video master class on how to make a stork from bottles with your own hands:
Master class: wasp, ladybug and other animals from bottles
Also, various insects can be made from bottles, so do not rush to throw them away. During the winter, you can just collect enough material for summer crafts. The leader here, of course, is the ladybug. It is very easy to make it from the bottom of a plastic bottle, a step-by-step master class is not even required - just cut off the bottom, make a head with wire horns out of caps or some kind of ball, paint it red or any other color, draw dots and eyes - here is a craft and ready:
From what else you can make a ladybug for garden decor - read in this article. By the way, it is also easily made from plastic spoons - then you can decorate trees or a fence with them. Other insects that can be made from bottles are predatory wasps and bees, bright dragonflies or butterflies, which we will now tell you how to make.
Butterflies from plastic bottles: a master class for decorating a gazebo
Bright butterflies will decorate any room, they will look especially original on the gazebo. To make these insects, you should cut out the middle of the capacity of a plastic bottle (color does not matter), make a cardboard blank in the form of butterfly wings, attach it to plastic and cut off at the edges. Next, attach the wire to the bend line. Beads of various sizes will help decorate the body of such a “resident of the gazebo”. Butterfly wings are painted with acrylic paints according to the desired image. It is desirable that the color of the butterflies matches the color scheme of the design of the place of rest.
Butterflies from plastic bottles
Draw and cut out a butterfly
creative butterflies
Go for butterfly flowers
Figures of people from plastic bottles
If you are already familiar with animals, let's go ahead and try to make something more difficult, for example, figurines of a man from bottles. For example, look at what a cute black baby came out of brown bottles, and how easy it is to make it:
By the way, Negro is a popular topic of plastic crafts. This is probably due to the fact that after winter a lot of brown bottles accumulate, which can be used for crafts without even painting. Well, another option is garden gnomes, a man and a woman, who are also not at all difficult to make:
Flowers from plastic bottles with step by step instructions
Why not decorate the cottage with flowers? And not necessarily alive, although that would be a great option. But in addition, you can add various flowers from plastic bottles. For example, it is very easy to make poppies out of them - here is a short step-by-step instruction for you:
Actually, there are no special steps here - we cut off either the bottom or the neck, depending on what kind of flower you want to make, and form the petals with scissors. Next, paint with varnish or paint. From green bottles we make a stem and leaves, collect them with glue or wire into a single structure and “plant” the flowers in a flower bed. In this way, you can make poppies and bluebells, daisies and gladioli, irises and roses, forget-me-nots, carnations, tulips and many other flowers that will not be difficult to recognize.
Unusual crafts for giving from plastic bottles
Flowers and insects, animals and birds, palm trees and gazebos - all these ideas are popular, but also hackneyed. And if you want to stand out, you have to come up with something of your own. But almost anything can be made from this material. We have selected several non-standard options for you. Of course, you can use them, but it would be ideal to come up with something of your own. By the way, we personally really liked the bright yellow minions made from a whole bottle - despite the absolute simplicity of execution, it looks really unusual.
Also a good idea for those who love winter more than summer - why not make long-lasting snowmen that will not only attract attention in summer, but also decorate your garden in winter?
And the most interesting thing we managed to find: at the very beginning of the article, we said that you can easily make a gazebo for summer holidays in the garden from bottles. But this craftsman went further and made not only the gazebo itself, but also the entire environment in it exclusively from bottles. These are walls, and armchairs with a coffee table, and a curtain, and decorative elements. How do you like the idea?
Thus, there are a huge number of ideas for decor. The main thing for their implementation is desire and imagination, as well as the presence of plastic bottles. And from them almost always there are traffic jams, which are most often not used in the usual crafts. But do not rush to throw it away, in the end we will tell you how you can decorate the cottage with the help of these same traffic jams. In the meantime, watch a video about the 5 most simple and easy-to-implement ideas on how you can use plastic bottles to decorate your summer house and garden:
We decorate the cottage with crafts from bottle caps
And it is very simple to do this - we will lay out a mosaic from multi-colored traffic jams. It can be animals - below there is a ready-made scheme for a cat and a dog, flowers or any other pattern that comes to your mind. Or you can lay out a whole panel, as in the photo above. Of course, this will require a considerable number of traffic jams. But the plus is that you can use ready-made patterns for embroidery to calculate exactly how many corks you will need and what colors. You can decorate the walls of the house, the space around the windows, the fence, the barn and any other horizontal and vertical surface with a mosaic of bottle caps in the country house. For example, why not make a door mat out of corks?
That only skillful hands do not make from unnecessary (junk) items. Crafts from bottles with their own hands are made for arranging summer cottages, playgrounds. And they look very attractive and original. Plastic is the cheapest and most affordable and very flexible material. From it you can create figures of animals, flowers, dolls, children's transport, borders. Some craftsmen use them in the construction of arbors, fences, greenhouses, garden furniture and even boats.
Features of plastic as a material
Many people throw away plastic containers, considering them garbage, but this is a unique material for crafts that will certainly find application in the household. Its features as a material for creativity are that:
- For the manufacture of crafts and work, you will not need any complex tools or devices, except for those that every good owner has in the house: scissors, sharp knives, candles, glue, stapler, drills, glue gun and so on.
- Not only the bottle itself will fit in the work. From the covers you can create colorful panels, paths, decorate old furniture with them.
- Thanks to the flexibility of the fluorescent bottle, even flexible structures can be created both indoors and outdoors.
- Crafts can have different shapes and sizes, so both very small bottles and large bottles will come in handy.
- Plastic is considered a safe material, so you can create crafts from it for playing at home or in kindergarten.
What bottles can be made for kindergarten or kindergarten
Creating characters and all sorts of figurines for children is a special area of amateur creativity. It is advisable to do them together with them. So it is easier to accustom them to perseverance, to teach attentiveness, concentration, to develop imagination. Consider, using the example of master classes, how to create simple figurines and fairy-tale characters for children.
Chamomile
There are several options for making this delicate flower.
Option 1
White bottles are required for work. They usually sell their milk and should be picked up a little. In extreme cases, you can use transparent, but then repaint it in white. For each chamomile we need 3 bottles. All of them must have the same neck diameter, otherwise we will not be able to put together the magnificent parts.
We cut off the upper part (neck with a lid), just below the place of expansion. We do this with only two bottles, we leave one. It is desirable that the lid is yellow.
Cut out about 8 petals on each neck. Only so that they hold on, and do not fall apart. Bend them one by one in the opposite direction.
Let's start collecting the flower: we put on one of the blanks on top of the one that remained uncut.
Then the second in the same way.
We unfold and bend the petals so that the chamomile looks natural and lush.
We fix all three layers with a lid, we try to make it tighter.
Such flowers can be left as is, or you can paint them in different shades after assembly. They can be planted on a wire stem or attached to a fence.
Option 2
This daisy is more complex in design, but it also looks more natural and beautiful.
We cut circles from the cylinder of the bottle (about 8 cm in diameter, more if you want to create a large chamomile). Each will require three mugs
Each circle is subsequently cut into 16 strips and we form flower petals from them.
In the center with an awl, hot on fire, we make a hole.
A little later, when we collect the workpiece, you need to hold it a little over the fire. So the petals wrap themselves, creating the correct shape of a camomile.
We cut out the core of the flower from the yellow cover, pierce it and fasten it with wire with the inflorescence.
We make a sepal from a green bottle, also melt it a little over the flame.
We first attach the sepals to the stem, then three blanks of petals, the core and bend it with pliers so that the chamomile does not fall apart. After bending, we draw the wire through the sepal again and twist it with the stem.
The stem will be a wire, on which thin strips (about 5 mm) of green plastic are wound. In order for the layers to stick together well, they also need to be scorched.
If you want to create a whole composition, make leaves by cutting them out of green plastic, singe them a little, wind them around the stem.
You can bouquet and diversify the bouquet by combining them with cornflowers. Here you need blue plastic, the petals are cut out in the shape of cornflowers. A flower is going to be similar to a chamomile.
With this technique, you can make any kind of wildflowers, and even roses, if you can roll them correctly.
Option 3
Now let's try to make a giant daisy.
As you can see, to create such wonderful decorative flowers, it will take only a few hours of time, a bottle, an awl, a candle, glue and scissors.
Penguin
Plastic Coke bottles are useful for creating a penguin, due to their narrowed shape in the middle and expansion at the bottom, a believable penguin body is obtained from it.
Tools and materials:
- 2 bottles of the same size;
- scissors;
- cool gun with silicone pencils;
- brushes;
- black marker;
- a piece of dense fabric;
- white, black and red colors.
Step by step penguin assembly:
- We cut the container in this way: the first, acting as the bottom, is cut in the middle or a little closer to the bottom, the second is the top of the penguin, so we only need the bottom. Rice. 1
- Now we connect both parts with slices to each other. Fig.2
- When connected, fix with glue (you can use a silicone gun). Fig.3
- Next, according to the plan, we will paint the body of the penguin. Select the type of paint so that it is not afraid of moisture. We paint the future toy in several layers. Rice. 4
- When the paint coating dries, outline the chest and muzzle with a black marker. Fig.5
- Paint over the outer part (behind the contours) completely with black paint. Leave only the top - this will be the place of the cap. Rice 5. and 6.
- In principle, the penguin is almost ready. It remains only to paint the place left under the cap with red paint. You can, as shown in Figure 8, decorate it with black dots.
- Draw eyes and a beak on the muzzle. This can be done with a thin brush and paints, or you can use colored markers. Rice. 9.
- Cut a scarf from a small piece of fabric, tie it on a penguin.
Crocodile
Let's try together to make another toy for kindergarten - a crocodile.
Prepare for work:
- two plastic bottles, 0.5 l;
- twist plugs from the same container - 4 pcs;
- sharp knife;
- stationery scissors;
- thin cardboard;
- glue;
- brushes;
- waxed paper;
- paints for drawing;
- eye buttons.
Manufacturing and assembly instructions:
Cut the bottles first in half, then so that a distance of about 7 cm remains to the neck.
It is necessary to form the edges so that the body of the crocodile is slightly bent during assembly. As shown in the photo.
Glue the covers in place of the legs.
Form dense balls from cardboard - eyes, attach to the body.
Cover the entire body of the alligator with green colored paper.
Cut out eyes, teeth, paws from paraffin paper.
Paint the teeth (white), nostrils (black), eyes (also black) with a brush, or use dark buttons as eyes.
bees
These funny insects are very easy to make.
Option 1
Prepare ahead of time:
- plastic containers with a capacity of 0.33 l;
- sharp scissors;
- acrylic paints;
- cup 0.5 l;
- brushes;
- glue;
- black tape;
- wire;
- stationery knife.
Instructions for execution:
From a plastic cup, cut out the wings of a bee, as shown in the photo.
The bottle does not need to be cut completely. We make only small cuts on the sides, with a clerical knife. These will be the placement of the wings.
Insert the wings into place, glue them.
Next, proceed to painting the bee. There are two ways to paint: paint the body black, then make yellow stripes, or vice versa, make it completely yellow, then draw black stripes. Let's use the first one - paint it dark.
Draw the eyes in white on the lid, and the mouth in red.
Option 2
You can make it in one copy, you can create a whole hive
To create a hive, prepare:
- plastic bottles according to the number of expected number of bees;
- yellow enamel or paint;
- black electrical tape;
- wash brushes - 4 pcs;
- for the eyes - beads or buttons;
- glue gun;
- synthetic thread;
- leg-split.
We paint plastic bottles yellow. You can do it a little differently - pour yellow paint inside, twist the bottle so that the paint evenly lies on the entire inner surface.
This method is a little more difficult and longer, but the coloring will turn out to be more effective and with gloss. In addition, it will not wear out, break or deteriorate.
This should be done in several stages to evenly paint the entire surface. Fill the bottle with paint, shake and lay on its side. As soon as the first layer of paint begins to set, twist it to paint the next area and so on until the end.
When the bodies of the bees take on a yellow color, we make transverse strips with black electrical tape.
On the lid we glue eyes, a nose from pre-prepared beads and buttons.
From another plastic container, we cut out shapes that look like wings. To them, at the same stage of work, we attach threads. For them, we will then hang the bee to the tree.
To the body of the bee, with the same glue gun, glue the thread with wings.
Color it yellow too. You can, again, use the complex method of painting. Or, in order not to lose a lot of time, just paint on top with a brush.
We will make the roof of the hive from wash brushes. We take them in a pile, tie them with twine.
On the lid of the bottle - this is our roof area, we apply a thick layer of glue. We spread the wash brushes on it so that they are evenly distributed on all sides. If somewhere they are a little unstuck, glue it.
Leave the craft for a while at rest to dry.
Everything is ready and the bees and the hive. It remains only to take it to the kindergarten and hang it on a tree.
In a similar way, you can make many bees, but without a hive and hang each one from a tree. Thus creating a real children's beekeeping center.
Creating bee crafts is an interesting activity, the work is not difficult. If the child himself makes it, under your strict guidance, it can be a good souvenir for grandparents. Such a craft will look very impressive against the background of the abundant foliage of a tree.
butterflies
Simple in execution and very interesting model of crafts.
Option 1
Let's prepare the materials:
- plastic containers (a few pieces will be enough);
- paper, not smaller than A4;
- stationery scissors;
- silver and brown nail polish;
- sequins;
- gel red pen;
- rhinestones;
- butterfly in a stencil.
Let's start making the insect:
First, let's prepare the bottles for work: wash, preferably with soap, release it from the label, dry it.
On a blank sheet of paper, scan or transfer the figure of a butterfly through carbon paper. For this we need a stencil. You will find it at the end of this subsection.
With a gel pen, you need to circle the contours of the insect on the plastic surface and cut it out.
We got a figure with wings curved down.
Turn it over, we need them to look up.
We take the gel pen again and draw all the lines, as shown on the stencil.
Paint over the middle (trunk) and antennae with silver nail polish. Let's draw the contours of the wings in the same tone.
Now with varnish you need to draw all the rulers, including the smallest ones, which were previously drawn with a gel pen.
Before the edges we put small dots (blotches).
Against the background of the silver drawing of the wings, we also put dots, only in brown.
We decorate the body of the butterfly with rhinestones. To do this, with any nail polish, put droplets and plant a pebble on top.
The butterfly is ready, for everything about everything, it took us a little time and material, which, for sure, will be found at home on the farm and with mom.
Similarly to the previous butterfly, we make another one, only this time it is plain and without pebbles.
We got two plastic butterflies, painted in the same tone.
If you stick a magnet to them, they will serve as a good decoration on the refrigerator or any other metal surface.
Option 2
Let's look at another implementation. We will paint it not with nail polish, but with stained glass paints. In the first version, we drew a butterfly on plastic, cut it out, and only then proceeded to coloring. Here the technology is different. We will draw an insect on the bottle, and we will paint it on it.
Let's prepare everything that is useful in the work:
- stencil drawing paper:
- plastic containers;
- stained glass paints;
- wire or thick fishing line;
- scissors;
- beads (several pieces of small size);
- awl.
Step-by-step instructions for execution:
We transfer the butterfly from the stencil to the paper.
Redraw the insect on plastic. You can do it like this. We cut the bottle, adjust the drawing from the inside so that we can clearly see it from above. With a gel pen we transfer the contours to the plastic.
When we finish drawing, we can start coloring. Recall that we paint without cutting out the insect, the paint falls on the bottle, along the contours. After painting, leave the workpiece to dry. After it dries well, cut it out. Give the desired shape with your fingers.
We form the body. To do this, take the wire or fishing line that we have prepared, string a few beads on it. You can take the same color, or you can make it multi-colored, it's as your heart desires.
A butterfly, or not one, if you have made several of them, are ready. They can decorate indoor flowerpots, hook onto curtains by attaching a pin from below, it is better to glue.
If the insect is made by a child's hand, then it will be a pleasant surprise and a gift for March 8 for mom, teacher or grandmother.
Stencils for making butterflies
hedgehogs
Waste material has a lot of opportunities and ways to extend its life. Moreover, in every family there is at least something. Here you don’t need to buy or invent anything special, much less spend money on them. Let's try to make a hedgehog from the same waste material as used plastic containers.
For work we will need:
- plastic bottle;
- pine cones, about a dozen, as long as they are the same size;
- two white caps, from the same bottles;
- glue (you can use "Moment" or, if there is mounting foam);
- colored plasticine.
Hedgehog creation technique:
First, we bring the container into the proper form: wash it, clean it from the label, wipe it and dry it.
On the prepared container, glue the cone directly on top with glue or foam (you can also use a glue gun if there is such an item on the farm). We start from the center, this will be the back of the hedgehog. We glue each cone as a separate element, after making sure that the previous one is firmly held.
If at least one of them falls, and the neighboring ones hold on tightly, then it will be difficult to “put” it in place. Take this into account and don't rush.
When all the cones - the needles of our hedgehog, are planted in their places, we will begin to form the muzzle. To do this, glue the bottle cap with black plasticine.
For the eyes, you will need white covers prepared by us. On them, in the center, we glue circles from the same black plasticine - these will be the pupils of the hedgehog.
Glue the eyes to the muzzle of the animal.
Now let's embellish our craft a little. What is a real hedgehog without stocks. We will make mushrooms, leaves, fruits with berries from plasticine. Then carefully lay it on his back.
You can create a baby for the company of an adult hedgehog by molding him with their plasticine. And since its dimensions will not make it possible to experiment with pine cones, the needles on the body can be made from sunflower seeds.
Helicopter
An interesting craft that you can do with your son for kindergarten. In this way, you will teach him to use various waste materials as a material for creating toys and other necessary things.
Prepare for work:
- a small plastic bottle, you can use baby yogurt;
- one tailor's pin;
- 3 tubes for juice;
- scissors;
- one ping pong ball
- stapler.
Step by step work:
First, make a hole in the lid so that the tube can freely enter there.
Cut the bottle so that the upper (with a thickening) part remains intact.
Take the remaining 2 tubes, cut them to the length of the intended propeller blades.
Cross them and pin them in the middle with a pin. Insert the tail of the helicopter into the cork of the bottle. Make skids from the two remaining parts of the tubes, connect with a strip cut from the unnecessary part of the bottle with a stapler.
Attach the main part of the helicopter with skids with a stapler too. Insert a ping pong ball into the hole.
The helicopter is ready. A minimum of time was spent on it, and the child will have a lot of pleasure from a toy created by his own hands.
Matryoshka
Matryoshka is probably the only toy that more than one generation has grown up with. In addition, it is considered a symbol of Russia. Many foreign tourists, coming to our state, buy them as souvenirs. Is it possible to create such a complex figure with your own hands, and even from waste plastic? Yes, you can, let it not be as functional as modern ones in toy stores, but it will be personal and, for sure, the most beloved.
In creating such crafts, not only plastic food containers are suitable, we will consider this a little later. The toys that you see in the photo below are made only from the tops of the flasks. So they will be more stable. So that the edges are not too sharp, they can be processed with electrical tape.
In this photo, the top part is inserted into the bottom, the middle one is generally removed. This nesting doll has a more respectable appearance, looks more natural and believable. Painted with acrylic paints. Children will not succeed in doing the same, but there are many stickers and patterns of a similar image on the Internet. As a last resort, they have a lot of options to learn and draw nesting dolls on such a layout.
The following photo and the model itself can be attributed to multifunctional. Here is a nesting doll in its own design and a pencil case for storing pencils and pens. As you can see, it is not made from a food bottle, and their containers are from shampoo or cream.
Approximate drawings and schemes for creating nesting dolls from plastic containers in kindergartens and at home.
Bottle cut diagram
Plastic bottles are considered to be garbage and sent to the appropriate places - trash cans and landfills. But in the right, creative hands, these things can sparkle with new colors. And you don't have to be a master to breathe a second life into ordinary plastic. You just need to have a little patience and imagination.
Crafts are quite simple and everyone can do such things with their own hands. Or maybe for someone this business will become a real hobby.
Useful things from garbage
Plastic bottles come in different shapes. They are also different in color and size. Therefore, it is quite possible to make small decor items for the garden plot from them. And for a summer residence, plastic furniture or even a summer gazebo built from the same plastic utensils is quite suitable.
And even caps from plastic bottles in skillful hands can turn into real masterpieces - a mosaic on the walls, a hot stand, cute toys for a child and other useful little things.
Everyone can make this or that little thing. This is where fantasy plays the main role. After all, the material for making crafts is almost everywhere. They can be found in the park, on lawns, near the river and in landfills.
And collecting them for his creativity, a person thereby purifies nature from harmful things. After all, plastic today has become a real disaster that threatens the environment. This material is durable, so the constructed crafts from plastic bottles will serve and delight for a long time.
Where to begin
In every decision, the main thing is a plan of action. In order to start working on the craft, you will need the following:
- a detailed description and photo of crafts from plastic bottles or one separate craft to choose from;
- bottles of suitable sizes and colors;
- additional materials and tools that may come in handy: a knife, scissors, adhesive tape, glue, paint, fabrics, etc.
Then you just need to be patient and follow the instructions. And soon the children will enjoy the new fabulous playground, the guests will be happy to spend time in the “almost crystal” gazebo, and the hostess will appreciate the unusual practical appliances in the kitchen.
Boxes
You can make an excellent box from plastic bottles, in which it will be convenient to store various little things: hair ties, buttons, paper clips. To do this, you need two lower parts of plastic bottles of the same size. They are interconnected by a zipper, which is sewn along the edges.
Or a simpler option is to cut off the top of the bottle in the place where it begins to narrow. The container is ready. It remains to decorate the bottle with decorative ribbon, buttons and beads. They are glued on. Sew a cap from the fabric, which is tightened with a cord and glue it to the edge of the container in the same way.
And it’s not at all difficult to make a convenient and original sandwich container that you won’t be ashamed to take to school or work. The main thing is to decorate it with a plan. And it is done in just a few steps.
The bathroom also has a place for a plastic box in which you can put all the necessary accessories: toothpastes and brushes, washcloths and shampoos. If these boxes are hung on the wall one above the other, then you can free up space.
Plastic bottles can make an unusual stand for pencils and pens. It is enough to cut it in a circle in the shape of a muzzle of a cat or an owl and paint it. In the same technique, a vase for flowers is made. Only for its stability, a handful of small pebbles should be poured onto the bottom.
Playground toys and decorations
To decorate playgrounds, decorations are made in the form of plants, animals and even insects.
For a palm tree, you need about 15 brown bottles, from which the trunk of a palm tree is made, and 7-10 green bottles for leaves. The barrel is assembled from bottles cut across, stringing them on a frame made of a strong rod.
To create leaves, green bottles need to be cut lengthwise, forming the desired shape. To make longer leaves, you need to attach an additional one to the main sheet using a stapler.
You can decorate your garden plot even in winter. Funny penguins in colorful hats and scarves will cheer you up on a cold winter day. You can make penguins of different sizes. For one bird, you need two identical bottles that have a "waist" at the bottom.
This bottle needs to be cut in half. This will be the body of the penguin. At the second bottle, you only need to cut off the bottom with a small margin - these are the legs. Connect the two parts with a glue gun, paint. Make a pom-pom out of wool and a scarf out of a strip of fabric.
Such crafts are not stable, since plastic is a very light material. In order for the penguins to stand quietly in the chosen place, they must be filled with sand or small pebbles before gluing the parts.
Even plastic lids in skillful hands turn into cute ladybugs. You just need to color them accordingly and stick funny eyes.
If the plastic lids are connected to each other by the edges in the form of a small circle, then you get an original stand for a hot pot or kettle. Such a device is useful in the kitchen.
Flowers and plastic bottles
Flower beds can also be decorated in an original way with plastic bottles. If you take the lower parts of the bottles, paint them in different colors and stick them into the ground next to each other, you can create a flower bed that will “bloom” all year round.
The tops of bottles with caps can also be used as flower pots. They are not stable, but in the form of flower pots they will look fabulous.
From plastic bottles with a volume of 3-5 liters, you get a bright flower bed-train. In each bottle, you need to cut one side part. Paint in different colors. Fill the bottles with earth, transplant garden undersized flowers into them. Lay them horizontally and lean against each other, creating wagons.
Furniture and buildings
The construction of a summer gazebo will require more costs and effort. After all, for construction, you will first need to make a frame of wood or metal. The walls are built from whole bottles, which are strung on a wire or rod.
First, a hole is made in the bottom of the bottle, the cap is unscrewed. A rod with strung bottles is attached to the frame in a horizontal or vertical position.
With the help of bottles, you can create a sofa, armchair, ottoman. Here you must first make separate blocks: seat, armrests, backrest. Then connect them, according to the design. Blocks are best made from 2-liter identical bottles.
On the top of the bottle (where the cap is) you need to put on the bottom of another bottle so that the bottom of the bottle is on both sides. All bottles, blocks are attached to each other with adhesive tape. To make the seat soft - you need a foam block of a suitable size. Sew a cover according to the size of the furniture.
Photo of crafts from plastic bottles
Helpful Hints
7. Lift the fabric and thread the string through it.
Master class from plastic bottles. Mobile phone holder.
From a plastic bottle, you can also make a good and very useful mobile phone holder. It is needed when you urgently need to charge your phone, you have found an outlet, but there is nowhere to put the phone.
Prepare a 0.5 liter plastic bottle, and pierce a hole with a knife to further cut off the unnecessary part of the bottle.
Using scissors or a utility knife, cut out the circle for the fork.
It remains only to insert the cord from the charger into the "neck" and plug it into the outlet.
Master class from a plastic bottle. Chandelier.
You will need:
50 plastic bottles (volume 0.5 l)
flower wire
plain wire
Bulb
Paint can
Glue (glue gun is better)
Scissors
Stationery knife
1. Prepare plastic bottles and remove labels from them.
2. Cut each bottle in the shape of a flower (see picture). To do this, use a clerical knife.
3. Spread the "petals" of flowers.
4. Once you've done steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint, or you can spend a little more time and paint each flower with acrylics. You can choose any color. You can also vary the colors by making some flowers one color and others another.
5. Make a circle from ordinary wire. Wind the jute, and use a glue gun to glue it to the wire. You will get the base of the chandelier to which the flowers will be attached.
6. Using flower wire, attach each flower to the circle you made from the wire.
There are two ways to attach floral wire to a flower: wrap it around the neck, or glue it.
Here is what the first layer looks like.
7. Repeat all steps to make multiple layers. In this example, 3 layers were made.
8. Attach the chandelier to the ceiling using jute (see picture).
What can be made from plastic bottles. Sprinkler.
Just make holes in the cap of a plastic bottle with an awl or a nail.
Products from plastic bottles. Funnel.
Plastic products from bottles. Money box.
1. Prepare a plastic bottle. Wash it with hot soapy water and leave to dry.
2. From colored cardboard, cut out details such as ears, eyes, a snout and nostrils.
3. Use glue or double tape to attach all the details.
4. Wrap the bottle with patterned paper.
5. For legs, you can use empty coils that need to be glued to the bottle.
6. Make an incision at the top for coins.
We make a dispenser for plastic bags from a plastic bottle
You will only need one 3 liter plastic bottle to store your plastic bags.
Simply cut off the bottom of the bottle so you can put bags in, and the neck so you can carefully remove one bag at a time.
You can use sandpaper to make the edges of the bottle more even and smooth.
We make bracelets from plastic bottles
You will need:
Plastic bottle
Adhesive tape (the width of the bracelet depends on the width of the tape)
Double-sided tape
Felt (or other material)
Scissors
Stationery knife
Decorations
1. First, wrap the bottle with duct tape. Make several "rings" as shown in the picture. Everything needs to be done neatly and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.
2. Using a utility knife, carefully cut off each ring.
3. Carefully remove the adhesive tape.
4. Glue double-sided tape to the resulting plastic bracelet.
We all know that plastic takes over 100 years to decompose. Therefore, by giving a second life to bottles, we not only create interesting accessories for summer cottages, houses and backyards, but also help to preserve the purity of nature.
Description of plastic bottle crafts
The variety of bottle products is only limited by your mind - there is a huge variety of them: from small flowers to such serious things as boats or fences for flower beds.
Organizers and stands for the design of the workspace
By cutting off the neck of bottles or eggplants, you can arrange storage places for sewing supplies, correspondence, stationery, and cosmetics. If the cut bottles are joined together with glue, then whole sets with containers for different gizmos are obtained.
For example, you can hang a similar design in the bathroom, for rolled towels, or in the office, at the entrance to the office - for letters. The cut off bottom of the bottle is suitable for buttons, pins, paper clips, beads.
Any such product can be decorated with paints, ribbons, ribbons, attach handles, getting a convenient portable "bag" for clothespins, curlers, hairpins and other necessary accessories.
Covers can be made from dense fabric, in the form of beautifully designed hats - such a product will not only be functional and practical, but will also decorate any room.
Curtains from plastic bottles
If you have accumulated a large number of identical plastic bottles - do not rush to throw them away. By cutting off the bottom of everyone, and fastening it with threads, you can get an original transparent curtain that will shine in the sun, protect from the wind and add zest to any veranda. This design will look like delicate flowers floating in the air.
floating facilities
Due to the lightness of the material and the voids, the bottles do not sink in water, which means that if you have a sufficient supply of material, you can design a whole boat or raft.
However, the product must meet all the requirements of reliability and withstand a certain weight, so you must first carefully make calculations, or better, watch a master class in order to create a quality product that will last for a long period and will not leak, creating a danger to life.
The most in demand crafts from plastic bottles for the garden, vegetable garden, and local area.
Bird feeders
There are many schemes for creating such a product. If you take a large container with a handle that was used for water softeners or dishwashing detergent and cut holes in the sides, you get a whole bird house.
If there is only a two-liter blank - you can, leaving the bottom, cut off half of the bottle vertically and pour the food down - on the remaining uncut bottom, it will be convenient for the birds to get to food.
If you make a hole in the side of the bottle, closer to the bottom, suitable for inserting a wooden spoon, you will get a whole feed supply system. Through the hole, cereals will wake up on a spoon, which serves as a platform for birds.
Plant containers
With the help of plastic bottles, you can make a whole vertical garden. To do this, in a horizontally lying bottle, you need to cut a rectangular hole and fill it with earth. Secure the bottle on both sides with ropes and hang.
Seedlings, flowers or small shrubs can be planted in the ground and thus equip the entire wall. Do not forget to make holes for drainage in the bottom of the flower bed.
Caps for seedlings
The cut off top of the bottle can be used to create a microclimate around a newly planted plant or seeds. The convenience of this use also lies in the fact that by opening the lid and without removing the bottle itself, you can water.
Fences for flower beds
The most common way to use plastic bottles is to create fences for flower beds and vegetable gardens. This design looks neat, attracts attention and creates reliable protection against spillage and washing out of the earth. For greater effect, you can tightly fill the containers with sand or earth.
To make the flower bed seem more elegant, you need to use the same bottles. There are several ways to stack them - horizontal, vertical, using whole containers or cut parts. The fence from the bottom of the bottle looks very gentle. In the complex, they create flowers that, by the way, will look great for a flower garden.
Lid products
Lids can decorate walls, flower pots, create paintings, compositions, figures, toys, decorate various surfaces. The greater the variety of colors, the more fun and brighter the product looks. The rug, hot pads, sculptures and other decorations for the home and garden will look original.
You can find thousands of examples and ideas reflected in the photo of crafts from plastic bottles and caps. City officials in many metropolitan areas are deliberately decorating entire streets, walls and pavilions with covers in order to attract public attention and encourage the rational use of plastic.
conclusions
Plastic bottles are an immense field of activity for a creative person. With their help, you can create real masterpieces that can optimize the workspace, create a functional storage place for various things, give the house an original, unique design.
And most importantly, you can make crafts from plastic bottles with your own hands, simply using unnecessary material ready for disposal.
Photo of crafts from plastic bottles
