Water heating of the house from a bar. Heating in a house made of timber: what is the best way to heat a log house? An important note on the issue of heating a house profiled from a bar
In the commercial market for electric heaters, there is a large selection of devices through which indoors you can achieve the optimal comfortable temperature for living in the winter. Electric heaters and devices based on UV radiation or special technical oils are quite suitable for heating wooden structures, but they are not suitable for 100% heating of the entire area. Bathroom, toilets and technical rooms remain in the cold zone, so the best option is to install an autonomous system based on electricity.
Electric heating
Heating installation
Electric heating of a house from a bar consists in observing the phased installation of equipment and devices, namely:
- installation of a warm floor: preparation of the floor base, installation of heating elements in the form of a pipe system, then installation of a decorative floor covering,
- installation of all heating points: pipes, radiators, expansion tank,
- installation of an electric boiler, boiler, pump and all electronic equipment,
- start-up and adjustment of the system.
Installation of the entire heating system is recommended to be ordered by a professional company, otherwise the installation will be too expensive. Yes, only a professional company will provide a guarantee of the quality of heating equipment and the uninterrupted operation of the system!
▼ Electrical heating: ▼
1 ELECTRIC HEATING - AUTONOMOUS HEATING2 Pros3 Cons ELECTRIC HEATING - AUTONOMOUS HEATING To make your country house or cottage as cozy and comfortable as possible for life, you need heat, which means you need a reliable and efficient heating system. One of the most common options if there is no access to gas networks is electric heating. Autonomous heating from an electric boiler in this case is perhaps the best choice. In addition, the installation of electric heating is quite simple, and this is another plus when choosing. Electric heating can be in the form of an autonomous water heating system, electric convectors, underfloor heating, etc. Autonomous heating is a vicious circle in which water is heated in a boiler, then it enters radiators through pipes, bypasses the whole house and returns to the boiler to heat up, that is, the water goes in a circle. Today, with the help of modern...
1 Heating with wood-burning and electric boilers2 Wood-burning boiler2.0.1 For all its merits, heating a house with a wood-burning boiler has a number of disadvantages:3 Electric boiler3.1 The main advantages of heating with an electric boiler:4 Installation of heating with a wood-burning and electric boiler The heating system of the house is the boiler. Currently, boilers, depending on the resource used, are divided into electric, wood and gas. In this article, we will consider the advantages and disadvantages of heating with firewood and electric boilers. The efficiency of the boiler as a heating element in the heating system lies in the ability to heat the liquid heat carrier, while spending the least amount of resources. Of course, everyone chooses a boiler at their own discretion, based on the opportunities and resources that are readily available in the region. Of course, the most efficient and cheapest to operate is a gas boiler. But if there is no possibility of connecting to the gas main, it is worth ......
In the process of building a cottage or house, each owner thinks about the heating system. Creating a heat system is one of the most important issues. There are various systems that help heat the room. Each of them has its own advantages and disadvantages. Electric heating is a relatively new type of heating. Heating of the room occurs without the participation of heat carriers, just electrical energy is converted into heat. Therefore, the air in the house heats up quite quickly. 1 Ways to implement electric heating of a private house2 Convector heaters3 There are several ways by which you can heat a house4 Underfloor heating system5 Infrared heating6 Advantages and disadvantages of heating with electricity6.1 Advantages of electric heating:7 Entrust heating installation to professionals Ways to implement electric heating of a private houses Convector heaters There are several ways by which you can heat the house. This is the use of electric convectors, the "warm floor" system and infrared long-wave heaters (ceiling). Electric convectors are especially popular.......
1 Electric heating with antifreeze2 Electric heating3 Installation of heating4 The following antifreezes can be added to the system during the cold season:5 Home heating6 Electric heating with antifreeze Electric heating with antifreeze Installing heating appliances in an apartment or house is a vital norm. Without warmth, there will be no coziness and comfort. A house without these two components does not attract, but rather repels. Who wants to freeze even if the rooms have super high-quality furniture and ultra-modern repairs? Therefore, all designers are primarily interested in solving a technical issue related to the choice of heating equipment, and after that they take up options for decorating the living space. Typically, the coolant in autonomous heating systems is water. It does not matter what fuel the boiler runs on, wood, natural gas, diesel or electricity, hot water of a certain temperature has a large heat transfer, heating huge areas.......
1 Autonomous electric heating2 Advantages of home electric heating3 Design features of heaters4 Choice of thermal devices Autonomous electric heating Thanks to a wide variety of heater models, modern consumers are given the opportunity to choose the optimal system for any facility. Advantages of electric home heating When installing home heating equipment, not only the financial costs of the equipment are taken into account, but also the cost and amount of thermal resources allocated for the operation of the system. The traditional home heating system in the private sector involves the development of a technical project, the purchase of pipes, plumbing fixtures, fittings and consumables. The cost of services of professional masters is determined individually for each object. Heating installation is best ordered from a company that works with turnkey facilities. Equipment and installation costs can be reduced by ordering installation and purchasing autonomous heating system equipment from the same company. Design features of heaters Modern models of devices for......
1 Electric heating of a cottage2 Choosing a heat generator3 Advantages of electric heating4 Electric heating devices4.1 All types of heat generating systems are suitable for electric heating of a cottage with an autonomous substation: Electric heating of a cottage During the winter cold, every living creature needs warmth. A person needs double comfort, as he has to do work not only inside the building, but also outside it, regardless of weather conditions. The activity and health of people depends on the quality of the system designed for heating the house, the supply of hot and cold water, as well as the way food is prepared. Each type of heating device requires the right selection. Choosing a heat generator The main criterion for choosing a system for heating a house is the physical and technical characteristics of the object, taking into account the climatic zone. Often, the old heating main of the centralized system does not withstand the workload, and at low temperatures, residential areas remain without heat. The most optimal...
Heating, especially in the harsh and changeable climate of Eurasia, is a necessary and obligatory thing. A lot of heating systems have been invented, but water heating has the greatest practical benefit at minimal cost. Heating is necessary both in the apartment and to a greater extent in a private house. Moreover, a private house, if you are building it, will specifically require from you such a technological operation as the installation of water heating from start to finish. From design to final coupling and flange. 1 Installation of water heating: the basics2 Basic recommendations Installation of water heating: the basics To begin installation, you must strictly calculate everything. If the installation of water heating is carried out by an installation company, this is done by heat engineers and engineers. A lot of factors are taken into account, such as the area, the volume of the room, the number of windows, the insulation material and the number of residents. After that, the preferences of the residents are taken into account and after that the installation company offers the most suitable equipment that takes into account the tastes and......
The company "DESIGN PRESTIGE" is an official dealer and carries out a full range of works with engineering systems... Heating water supply boiler room: Installation of heating in the country Sale and installation of drazice equipment Sale and installation of baxi equipment ......
De Dietrich (De Dietrish) is the largest and oldest French company for the production of boiler equipment in... Heating water supply boiler room: Installation of heating in the country Sale and installation of warmann equipment Sale and installation of meibes equipment ......
It is well known that natural gas is the most economical source of energy for home heating. Therefore ... Heating water supply boiler room: Installation of heating in the country house Installation of wall-mounted boilers Installation of a diesel boiler Installation of gas boilers Placement of ......
Our work is guaranteed for at least two years. Installation of a gas boiler is carried out ... Heating water supply boiler room: Installation of heating in the country house Installation of a diesel boiler How heating is arranged Heating services Installation of wall-mounted boilers......
Our work is guaranteed for at least two years. Minimum installation time. Coordination ... Heating water supply boiler room: Installation of heating in the country Installation of gas boilers How heating is arranged Heating services Installation of wall-mounted boilers......
Home heating - what are the heating systems and wiring diagrams? In the desire to make your home comfortable and independent of various climates......
1 Cost of heating installation (works) from 36,000 rubles 1.1 Heating calculator here http://resant.ru/kalkulyator-otopleniya.html2 Types of heating equipment Heating installation costs (works) from 36,000 rubles /kalkulyator-otopleniya.html Comfortable living in a private house is possible only if all communications are available - gas, water, heating, sewerage and electricity. But if you can still survive the lack of gas and sewerage, then you can’t go anywhere without heating, especially in winter. The choice of electric home heating is based on a number of factors. First of all, it saves space. Installation of equipment is carried out at any time of the year as quickly as possible, since it is not required to obtain special permission from regulatory authorities and carry out special maintenance. It is also worth noting that such heating allows you to save money by heating a specific area or a separate room, and not the whole house (unless, of course, this is required). Financial benefits are also achieved through...
1 ELECTRIC HEATING - BOILER INSTALLATION2 Benefits of an electric boiler.3 Boiler installation.4 Boiler installation installation steps. ELECTRIC HEATING - BOILER INSTALLATION Installing an electric boiler in a house or apartment is a convenient and fairly popular way to organize an autonomous home heating system. Sometimes this type of heating is installed as an addition to gas or wood. Advantages of an electric boiler Light weight; Compact volume; Silent operation; No harmful emissions; Relative ease of installation. Electric heating can be installed in any room, the boiler does not require a separate boiler room. The only negative is the expensive electricity, it is more expensive to heat with electricity than with gas, coal or wood. In addition, our electrical networks as a whole are not yet powerful enough for electric heating. Electric boilers are most often wall-mounted, without a built-in boiler for autonomous hot water supply at home. Boiler installation. All work on the installation of the boiler must be carried out only by qualified specialists with a permit from SRO according to......
A months-long cold period is a strict examiner and does not forgive anyone for miscalculations in the design of the heating system. Properly calculated and reliable electric heating, as one of the options for heating a private house, can protect yourself and your family from weather disasters. Compared to other types of heating that use gaseous, liquid or solid fuels, electric heating has higher tariffs, although the principles incorporated in modern heating can significantly reduce this negative factor. On the other hand, considered the cheapest, gas heating is called such only due to the low cost of gas. At the same time, gas heating devices are much more expensive than an electric heating boiler. Add to this the costs of connecting natural gas or installing a gas tank, as well as a lot of various approvals, and it turns out that you need to pay a very tidy sum, which not everyone can afford. At the same time, it is worth summing up the costs of laying yard ......
1 Electric wood heating2 Electric heating3 Wood heating4 Combined (hybrid) version Electric wood heating combined (double) electric-wood heating. Electric heating Among all heating systems, electric has the highest efficiency - almost 100%. In addition, electric boilers are cheaper than gas boilers and the cost of their installation is less. Electric heating is the only one that does not produce any harmful emissions. With its help, rooms quickly heat up, and the equipment works automatically. A significant drawback of electric heating is the cost of electricity, and in the countryside there are often power outages, and in the winter cold you can be left without heat for a long time. Wood heating Wood is the cheapest type of fuel, so it is profitable to heat houses with wood. Wood heating is...
1 Water heating. 2 About the "cheapness" of gas heating. Water heating. Many developers in the countryside have difficulty choosing a heating source in the absence of gas networks. The way out of this situation can be electric heating, which does not require large initial investments and is put into operation in the shortest possible time. Devices for heating with electricity are available in many residential buildings, these are various spiral heaters, heaters, and heat fans. Electric boilers are used much less frequently and this is due not only to the high cost of electricity, but also to the lack of public awareness of modern devices that can largely compensate for electrical tariffs. About the "cheapness" of gas heating. I would like to dispel the myth about the cheapness of gas heating compared to electric heating. There was such an established opinion when people received apartments in houses connected to gas mains. Gas tariffs for residents of such houses......
The reliability and efficiency of water heating is provided by boilers operating on various types of energy carriers. So, electric heating uses the current that flows through the heating element and transfers its energy to the working fluid. Gas is the cheapest fuel, but if it is not expected, then electric heating will be the way to effectively and reliably protect against winter cold. Small dimensions, pleasant design, lack of chimneys and simple installation make this heating very attractive. Although many claim that an electric boiler is very expensive, there is only a grain of truth in this. The low cost of heating elements and electrode boilers, low installation costs and modern ways to reduce electricity consumption make it possible to compensate for this disadvantage. Thus, the use of a multi-tariff electric meter makes it possible to redistribute the maximum peak of heat consumption for the period of the night minimum, when the cost of electricity drops four times. In order not to start the electric boiler for a longer time and use cheap heat, a heat accumulator is installed, which gives off during the day......
boiler rooms For private houses And enterprises.In this article we will talk about the most popular and sought-after heating systems in a private house made of timber. Find out what you need to pay attention to when planning home heating, how to choose the best system for your home.
What are the pros and cons of water, air, gas, electric and stove heating of wooden houses.
Wood has high energy-saving characteristics, but organizing the heating of a log house is a responsible matter if you plan to use such housing as a permanent place of residence.
Where to start choosing
Solid fuel boilers work mainly on wood and coal. Nowadays, they are used less often, but not without their advantages.
Heating radiators in a wooden house made of aluminum light in weight, but less durable, do not tolerate pressure drops. Biometal radiators combine the advantages of aluminum and steel. Lightweight aluminum body and heat carrier made of steel pipes, which do not corrode, and due to this they have a long service life.
Local heating houses from a bar are made with the help of heat guns, convectors, fireplaces, heaters, stoves-bourgeois stoves. The disadvantage of this type of heating is that these devices can only heat a small room.
To organize an autonomous system heating a house from a bar requires a centralized boiler and pipes. This installation must be stationary and warm up the room completely. To date, this is the most popular type of heating for low-rise buildings. The efficiency of this type of heating is achieved through an individual approach to the creation of heating system projects for each individual dwelling.
Gas heaters in local systems are not used very often. These designs provide for the presence of an open hearth. In addition, gas burners absorb oxygen in large quantities.
In autonomous heating systems houses from a bar gas is very popular. Heating boilers in a modern wooden house are so advanced that there is practically no need to monitor their work. The system is fully automated, the boilers are economical, they heat large areas at once.
Steam heating of a private house from a bar
Provides continuous movement of water in a circle. The system consists of an expansion tank, a boiler, pipes made of polypropylene. For better water circulation, a pump is inserted into the system. How the coolant is used liquid antifreeze.
Advantages
- It is possible to heat the whole house, even a large area.
- The boiler is installed in a specially designated place.
- There is a temperature control function.
- High efficiency and economy.
- You can use solid fuel.
- Installation of a double-circuit boiler for water heating and space heating.
- One bookmark of fuel is enough for a long time.
Flaws
- Complexity of installation and high cost.
- The high cost of boiler equipment and its maintenance.
- You need to look for a separate room for the boiler.
- Depends on electricity (circulation pump).
Heating a house from a bar using an air system
Here, the coolant is the air that enters the system after heating. This type of heating is suitable for regions with a mild climate.
pros
Minuses
- It must be installed at the stage of building a house. Pipes through which air passes are installed in recesses in the walls, under the ceiling or in false walls.
- The system needs constant maintenance, which is difficult to do with this method of installation.
Underfloor heating
The option in a wooden house also has its advantages and disadvantages. Heated water flows through pipes made of metal polymer.
Any type of floor can be laid on top of the system. If the system fails, the floor will remain warm for several days. The disadvantage of such floors is the complexity of installation, it is necessary to first make engineering calculations.
The screed is made at the level of 8 cm, which in turn steals space. The optimum temperature for heating water should be at 40 ° C.
Living in your country house made of profiled timber has many nuances. And one of these nuances is associated with the arrival of severe frosts, when it is necessary to independently make a decision regarding the heating of residential premises. What is the best way to heat? There are a huge number of solutions, and we presented many of them in our note.
An important note on the issue of heating a house profiled from a bar
Recently, during a large number of developers prefer to use building material of natural moisture. Because of this, some restrictions are obtained when using heating systems in such buildings, because a log house made of profiled timber should dry out evenly. Otherwise, quite noticeable cracks and other troubles can form in the walls of profiled timber, the consequences of which are not so easy to fix. At first, even the scorching rays of the sun that will fall on the walls can also lead to disastrous consequences, what is there to discuss about the heating system ?!
At the first time after the construction of the building, one should not think about any heating - at the initial stage, there is a significant shrinkage of the building material in natural environmental conditions. In the future, heating is carried out at a temperature regime that does not exceed twelve degrees Celsius. The consistency of this temperature, together with excellent ventilation of the living quarters and moisture control of the profiled timber, will help to dry it under the best conditions - this approach will help reduce the risk of significant cracks. The presence of moisture in the building material should change slowly: during the cold season, it is best if it reaches a threshold of 18 percent, no less. After that, you can gradually raise the temperature in the room, but not higher than two to three degrees in seven days. After the humidity reaches 15 percent, you can raise the air temperature in the rooms to twenty-five degrees - this applies to the first heating season, where this temperature will be maximum.
The most popular types of heating
Before installing the heating system, the first thing to do is to insulate the walls, the floor and, of course, the roof of the house from profiled timber. Otherwise, it will turn out that you will heat the street, from which, therefore, it follows, a waste of money. Currently, there are several popular heating options, but only a few are quite actively used in our country. The first three types, which are listed below, are most suitable for use in a house made of profiled timber for permanent residence. Heating with a stove is gradually leaving the first positions and, as a rule, it is now used most often for heating country cottages.
Water heating
In this case, water is used as a heat carrier, which circulates in a closed circuit "boiler - heating radiators - boiler". There are two more solutions for similar heating for a house made of profiled timber: with forced or natural water circulation. The first solution is perfect for small buildings whose area does not exceed one hundred square meters. The movement of this coolant in this embodiment is due to the difference in the mass of warm and hot water. Heating, where forced circulation of the coolant is used, must be equipped with an electric circulation pump, due to which the necessary water pressure is ensured.
The advantage of heating systems with natural circulation of the coolant is independence from the power supply. The downside is the short range.
The forced circulation system has one advantage - it is that a house made of profiled timber can be heated in almost any area, but there are two drawbacks:
- complex installation, due, among other things, to the installation of additional equipment;
- power dependency.
air heating
In this case, the role of the heat carrier is played by air, which is heated by an air heater. Heat exchange takes place in a special heat exchanger, where air is forcibly supplied from living quarters. After that, the already heated air is distributed throughout the house with the help of air ducts.
Advantages of air heating:
- controlled change in air temperature, which can be controlled both in separate rooms and inside the whole house from profiled planed timber;
- high efficiency.
Disadvantages of heating with air:
- dependence on electricity;
- rather laborious installation;
- a similar type of heating should initially be calculated even when designing a house from profiled timber.
Heating system "warm floor"
Distinguish systems with electric and water heating. In the case of water heating, the coolant, that is, water, passes through a closed circuit, which is a pipe embedded in the floor screed. The heat carrier is heated in the boiler. In the case of an electric floor, an electric heating cable is used as tubes.
Benefits of underfloor heating:
- correct distribution of heat over the entire area of a particular room;
- the air does not dry out;
- absence of drafts, which are caused by the operation of the heating system;
- does not affect the design of residential premises;
- convenient regulation of the required air temperature.
Cons of the heating system "warm floor":
- rather difficult installation;
- the height of the premises in the house is reduced;
- quite an expensive repair.
Stove heating
The classic version of local heating at home, which involves the construction of a fireplace or a massive stove.
The advantage of this heating system is that it can be an effective design element of any interior.
Cons of furnace heating:
- with the help of a single stove it is impossible to heat the whole house, this is possible only for a small cottage;
- low efficiency;
- the oven will take up a lot of space;
- periodic maintenance is required;
- often causes a fire.
Whatever heating system you choose for a wooden house made of profiled timber, first you need to learn how to prevent heat loss. It should be remembered that a significant part of the heat is passed through an uninsulated roof, walls and windows of a house made of profiled timber. And be sure to take into account that how you continue to heat your own home in the early years of its operation can have a huge impact on its longevity.
Once a traditional Russian stove was the only source of heat in the house. Today, homeowners have complete freedom of choice. Log houses are quite suitable for living in them all year round. But their heating is associated with some features. First of all, heating a house from a bar requires strict adherence to all applicable safety standards and rules. After all, wood is a highly flammable material, and any mistake during the installation or operation of the heating system can result in the complete destruction of the home.
How can you heat a house from a bar?
It is desirable to decide on the future heating system at the design stage. Indeed, unlike brick or block houses, unused technological holes, after any alteration, cannot be hidden behind plaster here. As for the main options, the following deserve attention:
- water heating;
- warm floor;
- air heating.
When choosing a final decision, you can be guided by the following factors:
- simplicity and efficiency of system installation;
- cost of equipment;
- the cost of maintaining the system;
- expediency of use in a particular region;
- aesthetics.
Although in general, one can rely on one universal rule here - the simpler the better.
Water heating
At the moment, water is the most efficient type of coolant. Therefore, water heating is the most common solution. The operation of the system is ensured by the circulation of water in a closed circuit "boiler-radiator-boiler". This process can be either forced or natural. Forced circulation with the help of pumps is resorted to in large-sized houses with an area of \u200b\u200bmore than 100 square meters. m. Natural circulation is managed in small houses, where the movement of the coolant will be quite effective due to the difference in the mass of hot and cool water.
The main advantages of water heating:
- low cost of installation and subsequent operation of the system;
- high efficiency;
- versatility (equally effective for heating houses with any area);
- high level of system reliability.
The water heater in systems of this type can be a gas, electric or solid fuel boiler.
Underfloor heating systems
If water heating is considered a traditional solution, then underfloor heating is an interesting novelty that is becoming increasingly popular today. Heating a house from a bar with warm floors is beneficial primarily because it allows you to spend a minimum of energy for high-quality space heating. In addition, heat is distributed evenly over the entire area of the room, which is an absolute advantage, since the air becomes warm, but does not dry out and remains fresh. Another plus is stealth. The system is hidden under the floor covering, without taking up space and without violating the integrity of the interior.
The warm floor itself consists of a heating cable, which is located under the finished floor covering or a system of water pipes. The latter functions by analogy with conventional water heating, however, given that it operates in low-temperature mode, along with gas, solid fuel and electric boilers, heat (geothermal) pumps can also be used as the main source of heat.
air heating
If we talk about log houses, air heating systems can be considered the most profitable solution. Not without reason in the northern states of the United States, as well as in Western Europe, more than 80% of private houses are heated in this way. As the name implies, the heat carrier here is the air itself, which is first warmed up and then supplied to the premises through a duct system. As for the heaters, they come in different types and can run on electricity, natural gas, as well as solid and liquid fuels.
The main advantages of air heating:
- high efficiency;
- lack of pipes and radiators (air ducts are hidden in the walls);
- easy temperature control;
- lack of local temperature drops and condensation on the windows;
- efficient heating of large areas.
As for the shortcomings, only one of the tangible ones can be distinguished - the high complexity of installing the system, which is assembled in stages and in parallel with the construction of the house.
What other options are there?
At the moment, such exotic things as stove or fireplace heating are still found. But it is used in isolated cases, and its effectiveness, despite all the tricks and technical modifications, leaves much to be desired. Therefore, it will not be practical to use a stove or fireplace in a house intended for year-round living of an ordinary family. The same can be said about electric radiators, convectors, IR panels and other similar options. They are not efficient enough to fully warm up the house in winter and are more suitable for installation in a country house or in guest cottages.
That they are always warmer than brick and wooden buildings. This is due to the properties of the timber and the heating features of such houses. Therefore, the requirements for the heating system of log houses are very high. By entrusting the construction, installation and adjustment of heating to a non-professional, you will lose the most important advantage of a house made of timber - warmth and a special microclimate.
What heating systems are used for log houses
For houses made of timber, the following types of heating are used:
- water with a gas boiler;
- water with a solid fuel boiler;
- water with a liquid fuel boiler;
- water with an electric boiler;
- electric convection;
- electrical infrared;
- Heat pump;
- heating or heating and cooking stove;
- fireplaces;
- combined.
What to consider when choosing heating in a wooden house
When choosing heating, like others, it is necessary to focus on the availability of energy resources. If a gas main passes near the house, then it is advisable to install a gas boiler and water heating in the house. If there is no gas main, you will have to choose between electric, liquid fuel and solid fuel heating. Each heating system has its pros and cons.
- Electric boilers, infrared and convection systems 5-10 times cheaper than any other type of heating, but they depend on the stability of the supply of electricity and energy costs are noticeably higher than for firewood, coal, peat, pellets or main gas.
- Liquid fuel heating systems work not only on diesel fuel or fuel oil, but also on waste oil. Therefore, owners of large car services often install this type of heating, despite the high cost of equipment. Because during the year dozens of tons of used oil accumulate at the service. If you heat the house with fuel oil or diesel fuel, then the cost of energy resources will be 3-7 times higher than when heating with electricity.
- Heating and heating-cooking stoves heat the house for 10-14 hours from one firebox. Their main advantage is thermal radiation, which has a beneficial effect on the body. The disadvantages of such heating are the need to heat the stove 1-2 times a day and the inability to heat remote rooms.
- Solid fuel boilers with a heat accumulator heat the house for 30-60 hours from one bookmark of firewood or coal. Boilers with automatic fuel supply will cost 5-10 times more. In this case, the cost of installing heating is comparable to building a high-quality stove or installing a liquid fuel system.
- Fireplaces are more suitable for the role of additional heating and decoration. The exception is fireplaces with a built-in water heating register and a heat accumulator. In this case, they successfully heat the house and create a place of comfort and coziness, where it is so pleasant to sit on a cold winter evening. But even in this version, a fireplace is the most inefficient way to heat a house.
- Combined heating combines the best features of all the systems listed above. For example, a water heating register is inserted into a heating or heating and cooking stove, due to which remote rooms and a bathroom are heated. Or, in parallel with a gas / solid fuel / liquid fuel boiler, an electric convection or infrared heater is installed.
In addition, when choosing a heating system, other factors must be considered:
- house area;
- house layout;
- the height of the house;
- heat loss of walls, windows, doors, roofs and floors;
- average and minimum winter temperatures;
- wind speed and humidity in winter.
Therefore, only a qualified craftsman with extensive experience can choose the right heating system for a house from a bar. Otherwise, it is likely that it will be hot in some rooms and cold in others. If this happens, the walls of cold rooms will begin to dampen. After all, warm air, in contact with a cold surface, leaves water condensate on it. As a result, a house made of timber will not only lose in coziness and comfort, but will also lose reliability. After all, dampness in the room for 10-15 years will lead to the appearance of mold and rot even on the treated walls themselves.
Why it is worth ordering the installation and connection of heating in Richwood
Our experts will determine the type of heating most suitable for your home, calculate the movement of warm and cold air, and take into account all important factors. After that, our masters will carry out the necessary preparatory steps, install and connect all heating elements, including the installation of a chimney and ventilation ducts. The result is a winter-ready home with an efficient heating system and low energy bills.
