How to set the time on the starline alarm. How to set the time on the Starline keychain
Setting the clock, timer and alarm clock of the Starline car alarm is necessary for accurate activation of timed functions. For example, to use remote automatic engine start. You can do it yourself using the user manual.
[ Hide ]
Instructions for setting the time
The procedure for setting the time on the Starline key fob may differ depending on the alarm model.
How to put and set the time on the remote:
- Take the pager and hold down the key under the third number, it is used to adjust the clock settings security system. Hold down the key until the key fob speaker emits one melodic pulse. After that, another short beep will sound, and then two more short melodies will sound. This indicates a successful entry into the clock programming mode. On the key fob "signaling" the indicator with the clock will blink. With the key under the first number, the hour values are increased, and with the second button, this parameter can be decreased.
- Then briefly press the third key to set the minutes. This will cause the minute indicator to flash on the display. Key 1 increases the minutes, and the second button decreases them.
- After that, click on the 3 key, this will cause the pager to enter the alarm parameter activation mode. When the corresponding indicator starts blinking, the first key will increase the readings, and the button number two will decrease them.
- Click the key again to set the alarm minutes. Similarly, the procedure for increasing and decreasing parameters is performed.
- With the subsequent short-term click on the key 3, you can activate or deactivate the alarm clock. Button 1 of the “signal” turns on the function, and the key number 2 turns it off.
- If you continue to press the key number 3, the menu for setting the alarm timer will open. When the option indicator starts flashing, the first and second keys decrease or increase the parameters. With the subsequent short-term click on the third key, the minutes indicator will flash. Adjustment of value is made by similar buttons. After setting, pressing the key number 3 will activate or deactivate the option.
- To leave the clock setting mode, you just need to not touch the buttons on the pager for five seconds.
Irina Belousova showed how to independently set the time on the Starline pager.
How to set the time on the key fob, E91, B94:
- To enter the settings menu, you need to click and hold down the key at number 4. The button is held until the pager of the security system emits one long, and then two short beeps.
- After that, you will hear another long and two short beeps. On the pager screen, you can see the indication of the first option. The first and fourth keys select necessary function. F1 is used to adjust the time and date settings.
- After selecting an option, click on the fourth button and hold it down until two short beeps sound.
- Specify an adjustment option. The pager allows you to set not only the minutes and hours, but also the day, month and year. To select the desired value, click on the fourth or first key.
- Once a parameter has been selected, the values are adjusted by using the second and third buttons.
- When all values are set, you must exit the setup mode. The alarm will automatically leave it if you do not click on the pager buttons for eight seconds. You can exit the settings menu by holding the first button on the transmitter. Exiting the mode will be signaled by two short beeps from the pager.
Causes of settings failure
If the wrong time is displayed on the control device, then first of all it is necessary to diagnose the battery condition in the pager. All remote controls of modern Starline security systems are equipped with the option of indicating the battery charge. When the battery loses its capacity and cannot perform its main function, a low indicator will be displayed on the screen. In addition to the icon on the display, the remote control will emit a characteristic melodic signal.
The cause of the failure may be the replacement of the battery. When a new battery is installed in the pager, it will reset the time automatically. Please note that changing the power supply will reset the anti-tamper alarm settings. After you change the battery, you need to activate the security mode. Only then is it possible to set time indicators. The problem of settings failure may be due to the fact that the car owner made mistakes during the adjustment.
Andrey Sharshukov showed how the time values are adjusted on the key fob from the Starline A93 complex.
Trouble-shooting
To fix the problem, it is necessary to diagnose the key fob and, if necessary, change the power sources. If the malfunction consisted in the failure of the pager itself, then the device must be repaired or replaced.
After eliminating the cause of the malfunction in the Starline key fob, you will have to re-adjust the clock readings.
There are two options:
- Traditional. Setting the time parameters is carried out according to the instructions described above.
- Radical. The power supply in the pager is replaced at 00-00. All time parameters will automatically reset to zero, and the time will start counting from the set point.
What happens if you don't set the clock?
The ICE remote start options may fail. The power unit of the machine will not be able to start on time by an alarm clock, after a certain time interval, or by a timer. After implementing the remote start option, the power unit will remain unheated, which, due to increased loads, can lead to damage to the starter device.
On the Starline alarm key fob, not only useful system information is displayed, but also the time that is manually set.
Most keyrings car alarm, which have a screen, can also display the time. This is not only practical in terms of controlling your schedule and time awareness, but also convenient for implementation. additional features automatic start. Starline does not lag behind its competitors and also uses the clock function in its arsenal. Setting them up is not difficult, you need to know the main principles of controlling the alarm key fob.
ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!
Even though Starline has simplified the time setting procedure to the maximum, some issues related to failed installation attempts continue to arise.
Possible Causes of Failed Time Settings
If you find that the time is no longer displayed correctly on your Starline keychain, then you should check the battery condition. It is quite easy to do this, thanks to the built-in battery indicator function. If the battery loses the necessary quality work energy, the corresponding picture appears on the display, accompanied by a sound signal. And although this reason is extremely rare, especially for Starline, check any possible options necessary.
The second reason could be a battery change. After installing a new battery, the time is automatically reset.
Be careful, replacing the battery inevitably entails resetting the anti-hacking protection, so the first thing to do is not to set a new indicator, but to put the car on the Starline alarm.
Another reason is incorrectly adjusted clock values or an incorrect set-up procedure.
Debugg
Regardless of the conditions that caused the failure or reset, you will have to restore the watch. You can do this in two ways:
- Classic. The time is set by service commands on the alarm key fob;
- Radical. Replace the battery at zero hours zero minutes. The time values will be reset to zero, the countdown will start from the given point.
Setting new indicators on the Starline alarm display has general principles for most models. They are performed using a specific algorithm of actions, which can be conditionally divided into three types, depending on the generation of the Starline alarm and some of its features.
Making settings for E, D, B series
Car alarms Starline markings , D and allow you to set the time period by performing the following actions: 
Press the fourth button on the control panel and hold it until the countdown of three signals - one long and two short. After that, 4 menu functions will appear on the screen. Select the desired one by pressing the fourth key again. You can set the date and time using the first function. It is designated as F-1. After that, hold down the fourth button again, wait for two signals and start setting the time using the first two service keys. 
Making settings for the A series
Setting the necessary parameters on the Starline A series alarm depends on the model number.
And it provides for the presence of four service keys, which determines the features of the commands produced.
It is possible to set the time parameters on these devices by long pressing the fourth key. After three consecutive sound signals the hour digits will flash and the values can be changed using the second and third keys. To set the minutes, press the fourth button again and repeat the above steps. 
And they have a simplified look and are content with the presence of three service buttons.
To carry out this procedure on the key fobs of these models, you will need to press and hold the third button with the image of an asterisk for up to three characteristic signals. After that, you can adjust the hours and minutes. The keys to open and close the lock allow you to decrease or increase the numbers, and the asterisk button to move between hours and minutes. 
What happens if you don't set up
The least that can happen in this case is that you lose additional information. More - such autorun parameters as starting on an alarm clock, at a specified interval or on a timer will be lost for models a91 and b9.
The consequences of this can be a cold engine and increased collection time, failure of the starter due to high loads during a standard start in the cold season, as well as the need to replace the battery during long periods of non-use. vehicle at low temperatures.
Liberal legislation aimed at protecting the rights of car thieves does not allow the car owner to use such effective means in the fight against this evil, like bear traps, electricity and explosives.
Therefore, every motorist cannot do without installing electronic security on their movable property. There are a huge number of models of such devices, for correct operation which require not only professional installation, but also the correct setting during the operation of the vehicle.
All radio technical parameters of the device are clearly fixed in the process of manufacturing the alarm control elements and cannot be changed, but such user settings as precise setting time must be correctly set.
How to set the time on the Starline A91 keychain will be described in detail in the article, but first you need to figure out why it is necessary to carry out such actions.
Why you need to set the time on the keychain
A modern car is not a luxury, but a means of transportation that can be controlled from a distance. Setting the time of the Starline key fob is necessary, first of all, in order to correctly set the moment for automatic engine start.
Despite the fact that it is not necessary to warm up the engine to start driving, due to the presence of minimal thermal gaps in the engine modern machines, V winter time such a feature would be very useful. To pre-program the car for certain actions, you will need to perform a simple setup of the alarm pager.
Time setting: step by step instructions
In order for the time setting on the Starline A91 key fob to be carried out correctly, you must step by step follow the following instructions:
1. The button at number 3 (an asterisk is drawn) is held until 3 beeps sound. After carrying out the actions described above, the icon with the clock will start flashing. Now you can set the time with buttons 1 and 2. With button 1 the number of hours increases, and with button 2 the time value decreases accordingly.
2. After setting the hours, briefly press button 3 and set the minutes. Similar to adjusting hours, minutes are set by pressing buttons 1 and 2.
3. At the next stage, the alarm clock is adjusted. For this purpose, button 3 is briefly pressed. After the icon starts flashing, the readings of this mode are also set by pressing buttons 1 and 2.
As you can see, there is nothing complicated in adjusting the time on the Starline A91 key fob, but when making the settings, you should be very careful not to confuse the modes. Flashing the corresponding icon on the display helps to carry out correct setting keychain.
Causes of frequent knocking down alarm settings
If the time adjustment has to be carried out quite often, then it is necessary to determine the cause of unstable operation. electronic system. The most common reasons for knocking down temporary settings on the Starline A91 keychain:
- Weak battery.
- Lack of reliable contact between the battery and the terminals of the device.
- Factory defect or malfunction software devices.
In the first case, the problem of frequently changing the time settings is solved by replacing the battery. To carry out this operation, it is enough to disassemble the key fob, remove the dead battery and install new element nutrition.
A new battery must be completely identical to the element being replaced in size and current ratings. If it is possible to purchase a more expensive battery, then this must be done. When using a high-quality battery, the frequency of replacement will decrease significantly.
If unstable work the key fob is caused by bending or destruction of contacts, then this problem can also be solved on your own. In the first case, it is enough to straighten the elastic contacts in order to increase their pressure on the contact part of the battery. If the contact is broken, then this part can be soldered using a low-power soldering iron with a thin tip.
A key fob malfunction caused by a factory defect must be repaired at the expense of the manufacturer. If the performance of the device is impaired due to the fault of the motorist, then the repair or replacement of the device is carried out at his own expense.
In the event of malfunctions that cannot be eliminated by one's own hands, one should contact specialized workshops, where professionals will establish the exact cause of the device's inoperability and perform quality repair or replacement of the Starline A91 car alarm key fob.
P.S. How to set the time on the Starline A91 keychain is described in the article. If a high-quality battery is installed in the device, then this procedure will rarely be required. Over time, the sequence of actions is forgotten, so it is recommended to bookmark this article in your browser for quick search if necessary.
Correctly setting the time on the Starline keychain is necessary in order to be able to automatically start the engine by timer. The nuances of setting the clock and date depend on the specific alarm model and will be different for the A series and versions E, D and B.
[ Hide ]
Time setting for series E, D, B
Instructions for setting the time on the key fob "signaling" StarLine models E90, E91, B94, B64, D94 and D64:
- Press button 4 with your finger and hold it down until one long and two short beeps sound.
- Wait until the beeps sound again (one short and two long) and the main menu functions appear on the display.
- By pressing the keys 1 or 4, activate the F-1 function, which allows you to set the time and date on the key fob.
- Press button 4 and do not remove your finger from the key until two short beeps.
- Using the buttons 1 (back) and 4 (forward) select the settings - step by step add the year, month, day, hours and minutes.
- Install desired value for each of the parameters using buttons 2 (increase) and 3 (decrease).
Additionally, you can set an alarm, set a timer, select the type of signal you like from the list and adjust its volume.
- leave the key fob for 8 seconds, after which the menu will automatically exit with saving all the set values;
- press and hold button 1 until two short beeps, which will help you exit the menu and save all changes made.
How to set the time for A series
To set the time for StarLine car alarms models A91, A92, A93, A94 and A61, you must perform the following algorithm of actions:
- Press button 3. Do not remove your finger from the key until you hear: 1 short melody, 2 short beeps, 1 short beep.
- When the hour display flashes, use the buttons 1 (increase) and 2 (decrease) to correctly set the hours.
- Briefly press button 3 and wait until the minute display flashes. Carry out the minute adjustment, also using keys 1 and 2.
- Quickly click on key 3 and wait until the key fob enters the alarm setting mode. Set the required parameters again using buttons 1 and 2.
- Press button 3 without a long hold to go to the timer setting function. Using keys 1 and 2 in the same way, set the correct values.
- To exit the menu, stop any actions with the key fob and after 10 seconds it will automatically hide the programming functions, saving all the entered parameters.
Photo gallery of key fobs of various versions of the Starline alarm
The photo shows the detailed location of the buttons on different models:
StarLine D64 StarLine A93/A63 StarLine B64 StarLine A64
Video about setting the time on the Starline A93 key fob
Causes of settings failure
The failure of the set time indicators in the StarLine car alarm key fob, as a rule, is caused by three main reasons:
- problems with the power supply;
- violation of the software;
- mechanical damage.
However, there are other factors that can affect the operation of the device and disrupt the performance of the clock, alarm, and timer.
Why are the key fob indicators reset?
The main reasons for the failure of the key fob and resetting the time indicators:
- My battery is almost done. When the battery is low, the device does not have enough power to function properly. As a result of this, serious violations can be observed in the operation of the pager, including zeroing of the time indicators. To prevent this, you need to regularly check the battery volume indicator, which is on all key fobs. security complex StarLine. When the battery charge drops to a critically low level, the key fob emits a corresponding signal, and a characteristic icon appears on its screen. To replace the battery, you will need standard AAA batteries.
- Replacing the old battery with a new one. When you install a new battery, the time, date and timer settings are automatically reset. All other settings are saved in full and will be activated the first time the unit is connected to the alarm.
- Incorrect operation of the software. In the key fob software system, failures sometimes occur, which can not only reset the time and date, but also violate the settings of the alarm protection function. With this type of failure the only way to optimize the operation of the key fob is to flash the device. It is recommended to entrust this task to specialists.
- Short circuit. The malfunction is a consequence of the ingress of water into the body of the device. To eliminate it, it is necessary to determine exactly which part burned out when the contacts interacted with moisture and whether it must be replaced.
- Mechanical damage. Dropping to the floor or hitting the key fob may cause the device to mechanical damage, such as unplugging some pins.
- Manufacturing defects. Sometimes a manufacturing defect is the cause of persistent failures in time settings. The key fob may stop working immediately after the alarm is set or after a certain period of time, depending on the severity of the assembly flaw. If the warranty period has not yet expired, it is necessary to replace the defective device with a working pager. Before you start using it for its intended purpose (arming the car, turning the alarm on and off), you must bind it to the anti-theft complex.
Trouble-shooting
If, after replacing the battery, the key fob still does not work, then a more serious breakdown that requires repair may have become the cause of the failure.
What will be needed?
To fix a problem in the StarLine car alarm key fob, you need to prepare the following tools, devices and objects:
- a small Phillips screwdriver;
- brush with soft bristles;
- cotton buds;
- a bottle of medical alcohol;
- multimeter;
- soldering iron with a thin tip.
Repair instructions
To eliminate the breakdown and restore all functions of the remote control, you need:
- Remove the battery from the device.
- Using a Phillips screwdriver, unscrew the screw holding the two halves of the key fob body.
- Take a soft brush and gently clean the inside of the pager from dust and other contaminants.
- If stubborn dirt or liquid drops are present inside the device, carefully remove them with a Q-tip dipped in undiluted rubbing alcohol.
- Using a multimeter, check the operation of the motherboard, transistor, diode, and others. important elements. If, according to the results of the diagnostics, any part turned out to be inoperative, it must be replaced with a serviceable one. You can buy components for a key fob from an alarm at a radio parts store or other specialized points of sale.
- Using a soldering iron with a fine tip, install a new part into the device. With the same device, you can return the departed contact to its place.
- Assemble the pager body and tighten the screw with a screwdriver. Insert the battery back.
Keychain StarLine disassembled
How to reset the key fob?
To reset the already configured key fob parameters and return the alarm to the factory setting, you will need to do this:
- Get into the car, turn the key in the ignition and start the engine.
- With the engine running, briefly press the service button 9 or 10 times, depending on the model of the security system.
- Turn off the engine and wait for 9 or 10 short beeps from the anti-theft complex, which indicate successful entry into the reset mode.
- Pick up the key fob and make one quick press on button 1.
- Wait until one short beep sounds from the security system, confirming the reset to factory settings.
- To leave the reset mode, you must turn on the car engine or wait a while until the system is automatically logged out.
If all the reset steps have been completed correctly, the car will respond with 5 flashes of side lights and 1 melodic signal, the duration of which will be longer than the previous ones.
