Homemade stand for a soldering iron. How to make a stand for a soldering iron with your own hands? Do-it-yourself soldering iron stand is a sign of good work style Foldable soldering iron stand
The main working tool of a radio amateur or equipment installer is an electric soldering iron, which cannot be used in the absence of a stand that is suitable in size and reliable in operation.
In amateur radio practice, a home-made stand for a soldering iron is most often used, the design of which is selected depending on the specific conditions of use.
As a rule, it consists of a base and two support posts, on which a tip and a handle-holder of a heated soldering tool are placed.
Make a high-quality stand with your own hands, used for soldering various products and metal parts can be from any improvised means that meet the following requirements:
- reliability and stability of the base;
- fire resistance of the material of the support posts;
- availability of space for containers with rosin and solder.
The simplicity of the device in question does not mean at all that low-quality parts can be used to assemble it and treat it as something not very important.
On the contrary, for the manufacture of a stand for a soldering iron, you will need strong and reliable materials suitable for working under conditions high temperatures, as well as an accurate calculation of the dimensions of the base with holders and containers placed on it.
The jars of rosin and solder attached to the base should be arranged in the order corresponding to the sequence of operations performed during soldering and not interfere with the work with the soldering iron.
Some craftsmen place soldering irons on such stands along with a power regulator, which significantly complicates the design of the entire device as a whole.
Unlike small-sized factory samples, self-made stands must have dimensions sufficient to accommodate all of the above elements.
Sometimes such devices are equipped with a special holder for a soldering iron (the so-called "third" hand), which allows fixing workpieces or parts to be processed. One of the simplest product options is a crocodile holder.
Simple version
Easy to assemble by hand comfortable stand with a minimum of parts, the following consumable may be required:
- a wooden flat blank made of beech or oak about 25 by 12 cm in size, necessary for making the base of the soldering iron stand;
- duralumin plates with a thickness of not more than 1.5 mm;
- miniature metal containers (brass cups from an old type of telephone call can be used for their manufacture).
After all this material is prepared, you can proceed to the assembly of the soldering iron stand itself, starting with the preparation of seats for containers with rosin and solder.
In the case of using brass cups from the ringing device (bell), they are simply screwed to wooden playground at a predetermined location.
After that, triangular or oval support elements are made from a duralumin plate (the distance between them is selected along the length of the soldering iron).
The supports formed in this way are attached to the base of the stand using self-tapping screws or large screws.
If necessary, the height of the supports for placing the soldering iron can be increased by lengthening them due to short metal racks with threaded ends.
All prepared parts should be carefully processed with a file, and then their surfaces should be cleaned. sandpaper, which will smooth out sharp edges and remove dangerous burrs.
Third hand holder
for soldering individual parts or products, it is very convenient to fix them in a certain position, freeing the hand in which the soldering iron should be located. For these purposes, a special device is used, which is sometimes called a “third” hand soldering iron stand.
To assemble it, you will need the materials and tools shown in the above photo. Parts required include crocodile clips, decorative candle holders, and any spring that fits.
Such a design can be based on a Chinese-made product equipped with a magnifying glass and containing all the necessary elements.
When assembling such a stand, first, at some distance from the center of the base, a spiral holder for a soldering iron is attached, after which holders from under the candles are inserted into the pre-drilled niches.
Before installing them, it is necessary to pay attention to the wall thickness of the cups, which is chosen for reasons of optimal thermal conductivity. And only after that it will be possible to insert them into the already prepared niches, pre-lubricating the bottoms with glue, and then align the edges flush with the plane of the wooden base.
After installing the containers for rosin and solder, it will be possible to fix the "crocodiles" by crimping them around the spiral. The height of their location is chosen in such a way that working with the soldering iron and the part does not cause any difficulties.
For the convenience of soldering, the spiral design can be provided for adjusting the position of the clamps vertically.
If necessary, a magnifier (magnifying glass) can be added to the soldering iron stand. However, the experimental operation of such devices has shown that the simultaneous installation of auxiliary clamps and a magnifying glass on a stand creates certain inconveniences in working with them.
The choice of options for making a stand with your own hands is quite diverse, and depends on the materials that are at the disposal of the master.
If you don’t want to do it yourself, you can always buy a ready-made stand at a soldering supplies store.
Every radio amateur or just a beginner in this business knows how to work with a soldering iron, and a stand is needed for its convenient use. It is in this article that I will talk about how to make a homemade budget soldering iron stand.
In order to assemble our stand you will need:
* A chipboard sheet, 18 mm thick, can be thicker, but it seems to me that this thickness is the most optimal.
* 4 self-tapping screws 20 mm and 4 smaller bolts.
* Sandpaper coarse.
* A couple of rubber stoppers from chemical test tubes.
* Hacksaw for metal.
* Phillips screwdriver or screwdriver.
* A thin screwdriver, an awl will also work.
* Pliers.
* Iron plate.
* metal mount from the antenna.
* A tin can from an old receiver that covers the board.
* Spring from a fountain pen.
* The soldering iron itself for testing.
The first step is to sand the already sawn chipboard sheet. We grind carefully, and give the edges a rounded look. We bring the blank for the stand to this type. The photo shows which workpiece was before grinding, and which after.
Thinking that many store-bought coasters are so simple that they don't have legs, I decided to make rubber feet for my coaster.
We cut rubber stoppers taken from chemical test tubes with a hacksaw, make their thickness the same with sandpaper, if it was not possible to saw off exactly.
After that, we screw a 20 mm self-tapping screw into each leg.
And in the pre-prepared hole we twist the leg with the screw.
Screw on the first leg.
Similarly, we fasten the second, third and fourth. We figured out the legs, now the stand will not go anywhere and will not scratch the table.
The next thing I did was bend the iron plate into a hook shape, as shown in the photo.
Using a screwdriver for small parts, I made a hole for two bolts that will hold this hook.
We tighten the bolts, as we see the hook is holding well.
We try on how the soldering iron will sit.
With the help of pliers, bend one end of the hook, it should look something like this.
So, the heating part of the soldering iron is not going anywhere now, so let's move on to the back of the soldering iron, or rather to the handle.
I decided to make this holder from a long-lost mount on the antenna, there are already holes there.
There is also a notch where the soldering iron handle fits well.
We fasten this mount with two screws.
And now the soldering place, since the tin needs to be taken from somewhere, for convenience we will make it closer to the soldering iron tip.
I punched a hole in the plate, which I took out of the radio, and screwed a bolt into it, he firmly pressed it to the stand.
From ballpoint pen, which had just ended, I removed the spring and decided to put it on our hook, first bent one end of it, then made a hole with a screwdriver in the board of the stand and launched this end of the spring there, and soldered it to the hook at the top.
The stand is almost ready, the next thing I did was melt the tin at the place of soldering, now, if necessary, you can warm up this place and tin the wires there.
The main tool of a home radio amateur is a soldering iron. Unlike other appliances, it cannot simply be placed on a table (workbench) during operation. Why? Right! He is hot. Therefore, you will need a special stand.
- 1 Required minimum for stand
- 2 Flipping through old magazines
- 3 Third hand - work comfortably
- 3.1 Best Options
- 4 Stand and power regulator for soldering iron
- 4.1 You will need the following items
There are many different devices on sale, from a simple holder to a whole complex called a soldering station.
In most cases, a soldering iron is needed to perform urgent repair work. If you are not a professional "homemade" - the instrument usually gathers dust in a box on the balcony, appearing once or twice a year. In such cases, many use the first object that comes across as a stand.
However, if you put in quite a bit of effort, a hand-made soldering iron stand will look no worse than a factory one. Especially if you regularly make electrical circuits.
Required minimum for stand
Flipping through old magazines
In old Radio magazines, you can find drawings on how to make a stand with an economical load switch.
- As a basis (1), a board with a selected middle is used, or a U-shaped structure made of a strip of plywood and two bars along the long edges
- Located below the surface contact Group 220 volt relay (2,4,5) with large collector pads. The wiring diagram transfers power either directly or through a diode. The radio element "cuts off" the half-cycle of the alternating voltage of 220 volts, reducing it to a value of 110
- Through the rod (6), the spring-loaded (7) button (8) presses the contacts when the soldering iron lies on the stand. Electricity is spent half as much, while the soldering iron almost instantly warms up to full power. The rod is attached to the console (9)
- The tool itself is located on the brackets (3) and (10)
- At the rear is a soldering iron socket connected to the relay output contacts. The power cable is connected to the input
- Between the racks, they usually nailed a tin of shoe cream or petroleum jelly to store rosin
The design is simple, but convenient and effective. If you don’t want troubles with contacts, we make a simple functional stand. Again, from the experience of Soviet radio amateurs.
Third hand - work comfortably
When soldering by weight, it becomes necessary to hold two parts and a soldering iron at the same time. This is where the term "third hand" comes from. In the next review, a homemade stand with such a device.
The materials and tools that will be needed for manufacturing are shown in the photo:
Factory made parts - crocodile clips, decorative candles(more precisely, cups from them), a flexible leg from an old mini lamp and a spring holder. The donor was a Chinese stand for a soldering iron with a magnifying glass.
Although you can make such a spiral with your own hands by winding a steel wire around a pipe or a screwdriver handle. The rest of the blanks are also replaceable, homemade is shareware, from improvised trash.
With a drywall crown, we mill recesses for cups from candles. Two niches for rosin and solder, and one niche for cleaning cloth.
In a convenient place (not in the center) we mount the spiral holder for the soldering iron. Practice has shown that such a scheme is more convenient than the classic horn stand for a soldering iron. The appliance is inserted in one motion, without fear that it will fall on the table.
We install aluminum cups in prepared niches, cut off the edges flush with the board. The use of thin-walled containers justifies itself when working with low-power soldering irons. The less metal, the lower the heat capacity. The thick walls of the solder cup can cool the small tip of the soldering iron when touched. A thin aluminum foil surrounded by wood, on the contrary, retains heat.
We crimp the "crocodiles" on a flexible rod, and fix the "third hand" on the stand. There are designs with a magnifying glass. Work experience shows that the stand for the soldering iron, on which the clamps and magnifier are installed, is inconvenient to use.
Best Options
- the magnifying glass is combined with the "third hand", the soldering iron is separate
- "third hand" on a stand with a soldering iron, a magnifying glass on a separate pedestal (our version).
The only thing missing is the ability to change temperature conditions work. This is especially true when mounting LEDs.
Stand and power regulator for soldering iron
The simplest and relatively affordable option, this is the purchase of a Chinese soldering station kit. You will assemble such a KIT yourself, so we will classify it as homemade.
It can be assembled in a stand case or as a separate device. The convenience of this design is undeniable, but we consider the least expensive options. There is a 220 volt soldering iron in almost every home, it remains to assemble a power regulator.
Important! Dimers for incandescent lamps can be used, taking into account the power of the soldering iron.
But again, you have to buy them. Consider a simple scheme for a home-made regulator with a power of up to 200 watts.
You can use an autotransformer, but this is a bulky device with low efficiency. Let's leave such "devices" for the museum of radio engineering. Our triac circuit is miniature and economical.
You will need the following items
The circuit provides continuous operation with a load of 200-300 watts. Short-term load up to 500 W is allowed.
Drawing of self-etching circuit board:
We carefully assemble the board, carefully soldering the legs of the parts. If the contact is broken, uncontrolled voltage surges can be obtained at the output.
The circuit is compact, it can easily fit on a soldering iron stand. At power up to 100 W, triac cooling is not required. Bree greater load - a small radiator is attached to the case.
After reviewing the material, you yourself will decide which stand to make. Or look visual video a lesson on making a stand with your own hands.
Many of us work with radio components, some are professional, some are at the level of a radio amateur, but this is not important, since soldering anything is interesting and fascinating process, and everyone has a soldering iron for this, and, of course, no matter what kind of stand, whether it’s a simple lid twisted from a can, or a ready-made design bought in a store, nevertheless, all these devices simplify our work, the more convenient it is done, the easier it is to work. For these purposes, it was decided to make something universal, a good assistant with good functionality, and at the same time use the material and mechanisms common in everyday life, which will not be difficult to find if desired. And now I will tell you how to do it.
Initially, I wanted to make something simple, namely a soldering iron holder with a temperature controller, since the soldering iron overheated, but once I started, I could not stop. All necessary fixtures did gradually, and therefore every time there were new and new ideas.
So, we need:
Material:
Chipboard board;
Bolts of different diameters;
Screws, self-tapping screws;
Nut-Lamb (10 pcs.);
Crocodiles (3 pcs.);
Door hinge (1 pc.);
Unnecessary flashlight;
3 motors (2 from the printer, 1 weaker from the typewriter);
4 LEDs (3.5 volts);
5 switches;
Collet;
Small sharpening nozzle (from the set for the engraver);
Helium paste (adapter for nozzle);
wires;
soldering iron;
3 corrugated tubes (from a gas lighter);
Cigarette case;
Tin coil;
Socket;
Door knob;
4 meters of cable;
2 power supplies (from a 5-volt phone charger and a 9-volt router);
Self-adhesive film, edge;
Black paint;
Tool:
soldering iron;
Glue gun;
Chisel;
Metal scissors.
So, let's begin
We take a chipboard board, mark and cut out G- figurative form, dimensions attached.
At a specially selected place, we mark and cut out holes for push-button switches (4 pcs.).
In order to conveniently place our devices, and they could be adjusted, double L-shaped levers were made, cut out of tin, for each individually.
The cheapest soldering iron stand was bought.
And now we will refine it!
It was decided to make 2 crocodile holders, for this we drill 2 holes on the sides, take a steel wire, and push it through the bottom.
Next, we bring the ends to the top, level them flush with each other, bend them so that they look solid? we take 2 corrugated tubes taken from a gas lighter, put it on a wire, and then we attach a crocodile on each side, and also drill a hole in the saucer in order to screw it tightly to the surface of the board, as a result we get.
We make the third vertical crocodile, bend it in this way.
It is attached to the bottom of the stand.
It was decided to make a mini drill, as well as a sharpener for small parts. For this, 2 unnecessary motors were taken from the printer.
A sharpening nozzle was attached to the motor, using an adapter from a helium pen. The motor itself was fixed to the found metal form, in such a way that it could stand upright.
In order to be able to work at night, we make lighting from an unnecessary flashlight, in my case of this type.
We remove the excess, and leave only the part with the LED.
In order for the lamp to move up and down, an adapter (lid) was taken, drilled through hole, a long bolt is inserted, holders are cut out, and everything is clamped with a wing nut, in this way.
Sometimes you have to work in hot weather, so I wanted to add such a nice little thing as a fan. We take the most common motor and make a case for it. The broken charger from nokia was optimally sized. We cut off the plug, take out the core and cut out a place for the motor.
The wires were soldered, assembled it looks like this.
To be able to solder small items we take a magnifying glass, remove the excess and make a backlight using 4 LEDs of 5 volts each, and fix it with a glue gun.
 |
 |
We fix everything in place and get it.
We put the switch.
 |
 |
We cut out two plates, bend them in the form of a slingshot, drill, and thread a long bolt, this is how it all looks.
We fix to the body of our mini drill, in this way.
In order for the stand to be used anywhere, add 4 meters of cable and the usual door handle, for its winding.
Drill 2 holes for the fork.
 |
|
We drill 4 holes for fastening, we make partitions.
We put together everything you need.
We make the main holder for the soldering iron, handle and tip.
Cut out 2 plates, bend, fasten to door hinge, and from below to the board itself.
The door hinge is needed so that when unwinding the cable, we can remove the soldering iron to the side, and it does not interfere with us.
|
|
|
Since the soldering iron overheated a lot, and it was almost impossible to solder, it was decided to make a temperature controller, after looking at the diagrams, etc., I decided that it would be easier to buy an inexpensive dimmer (dimmer) of this type.
Having disassembled it, and cut out a place for the board in the board, brought 2 wires to the bottom, left one half of the case, and drilled a hole in the middle for the regulator wheel.
 |
|
Attached to board with 2 screws.
I'll post the wiring diagram below.
In order to be able to work in one place, as well as for convenience, we put an outlet, which makes it possible to connect glue gun, phone charging, etc. things.
We make such a delivery, where you can put a jar of flux, or something else. Cut out of an old watch case.
When all the fixtures are ready and painted black, glue the self-adhesive film onto the surface of the board. Was chosen light color, since all the details are clearly visible on such a surface, the side faces are glued with an edge.
The stand for the soldering iron is an indispensable attribute of the soldering station. It can be purchased at any hardware store or market. However, its cost is quite high. To save our own money, a stand is made for Except financial issue, its functionality is considered. That is, it can be used for various needs in the household or in the production workshop. There are a lot of manufacturing options. All of them differ in the complexity of the design and the amount of time spent.
General information
As mentioned earlier, a do-it-yourself soldering iron stand is convenient fixture which performs many functions. First of all, it is a protective surface, which prevents damage to property.
Before working with the soldering unit, it must be warmed up. In this case, the metal body is heated to high temperatures.
Soldering iron stand - what is it for?
A quality part is necessary for those people who perform a lot of soldering work. For the manufacture of such a device as a stand for a soldering iron, special skills and abilities are not required. The process uses simple and available materials and tools. Finished device easy to handle. A homemade stand for a soldering iron should consist of separate elements. First of all, special containers are provided for rosin, flux and a department for mixing them. Some models are equipped with a box where small parts are stored. The soldering iron stand is suitable for any device, regardless of its power and degree of heating. In the manufacture of the structure, the location of these containers should be taken into account. Everything should be located so that it is convenient for the master to solder.
How to make a stand for a soldering iron?
It is unprofitable to buy ready-made coasters, as they have high cost and small dimensions which are not suitable for all types of devices. Therefore, many users ask this question: "How to make a stand for a soldering iron with your own hands?".
Before starting production, it is necessary to prepare materials. To do this, you need to purchase the following components:
- duralumin sheets, the thickness of which is 1.5-2 mm;
- small wooden beam ok (you can use different kinds tree);
- varnish containers;
- two metal boxes.
When all these parts are purchased, you can start making the stand.
So, in the plate you need to make several holes. Containers for rosin and alcohol will be fixed on them. Cans are easy to install. Containers should be easily inserted into the structure, and also fit snugly against each other. After these procedures, it is necessary to make a support. It is made by bending the base.
If necessary, each person can make special racks that raise the structure a certain distance. This is done for convenience in the process. Preparatory work end on the processing of a duralumin sheet with a file or sandpaper. Corners should not have sharp ends.
Construction assembly
So, let's start assembling the stand for the soldering iron. The prepared support must be fixed to a wooden beam.
This can be done with screws. Next, the prepared small containers are attached. They are attached to the base with special glue or epoxy resin. Many craftsmen also install a small container between the racks. It can store small parts that will be needed in the process.
From wire
A wire soldering iron stand has gained great popularity among many craftsmen and hobbyists. It can be made from ordinary tin can. In the process of assembling the installation, simple details are used:
- tin;
- large diameter pencil;
- washers and bolts;
- wire.
First you need to make a spring. The first thing to do is to purchase wire from the store. Some people remove it from other room fixtures. It should be thick enough to warm up to high temperatures the soldering iron did not destroy it. In addition, only high-strength material will go into operation. Ready product should spring.
We cut off the required length of wire and carefully align. To create a spring, a large diameter pencil is used. Holding the wire, carefully wind it around the pencil. The result should be a tight spiral. At its end, a special mount is made in the form of an eyelet. For these purposes, pliers are used.
The next step is to prepare the can. A small hole is drilled in its bottom.
This can be done with a nail or a drill. Next comes the stand for the soldering iron. The prepared spring is inserted into the jar and the structure is fixed with a bolt and nut. Washers are used to ensure a stronger mount. This method is quite simple. Anyone can make a soldering iron stand. It does not take much time to make it, as well as special tools.
Soldering iron stand with power regulator
All more people prefer to use this species stands. Its essence lies in the fact that it is equipped with a special device that independently adjusts the degree of heating of the soldering iron. Therefore, the device does not overheat and does not fail. The stand differs from other types in that it requires an electrical connection to function. For the manufacture of a variant with a power regulator, it is necessary to take the following elements:
- copper wire;
- a small piece of plywood;
- transformer;
- LEDs;
- details for fastening;
- resistor;
- wires;
- socket to connect to the network.
After everything necessary details were purchased, proceed directly to the assembly of the stand.
To begin with, the size of the installation is selected. Based on this information, a base is cut out of a plywood sheet. Next, a transformer and other parts will be attached to it.
Fuse holder
The manufacture of this option does not take much time, effort, and also does not require large financial investments. A wooden beam serves as a base, on which the fuse sponges are attached. They can be various sizes. It all depends on the personal preferences of the masters.
Stand Benefits
First of all, the main advantage is mobility. Homemade coasters used by people who often solder, working within several workshops. Such a design is not always at hand. However, it is easy to make. In addition, there is no need to carry rosin and tin separately in different containers, since now they are stored in special jars on a stand. Therefore, home-made installations are successful not only among amateurs, but also among professionals.
How to make a simple model?
It happens that it is urgently necessary to use a soldering iron, but there is no stand for it.
In this case, there is no time to look for the necessary parts and run around the shops. Therefore, it is better to make a simple, but also robust design. There are many options, but there is the fastest one. The stand can be made in a few minutes. An ordinary wooden block will serve as a base, and screws or nails will serve as supports. They are driven into the beam crosswise. This forms a stand on which the soldering iron fits well and holds firmly.
Conclusion
When soldering elements, a stand for the device must be present. Given auxiliary equipment it is expensive, so it is better to make it yourself. Such a process will not take much time, effort, and also save money.
