Motion sensor Xiaomi MiJia Smart Home Occupancy Sensor. Motion Sensor Xiaomi Mi Smart Home Switch xiaomi with motion sensor
In system " Smart House» Motion sensor Xiaomi Mi Smart Home Occupancy Sensor is considered one of the most effective security guarantors. The little box is attached to every device in the house (TV, lamps, air conditioning, lighting, etc.) and activates or deactivates them as needed, which saves energy. These amazing abilities are manifested by the presence or absence of a person in the room.
With the fantastic functionality of Xiaomi Mi Smart Home Occupancy Sensor, the sensor can recognize the movement of people and animals with a range of 7 meters and an identification angle of 170 degrees. The housing is made of heat-resistant white plastic, resistant to UV and light damage. Also, the motion tracking object is moisture resistant and works great during humid climate You can take it with you on a trip.
Functionality of Xiaomi Mi Smart Home Occupancy Sensor:
- The device works with a router, is controlled from the Xiaomi Mi Smart Home control unit and obeys only the smart home complex.
- When installing several sensors, it is possible to organize the switching on and off of a number of home electronics in the presence of the owner, and when leaving the reporting territory, all electrical appliances are turned off to save energy.
- It can be configured from your smartphone using a special application. For example, automatic ignition night lamp if the device is near the bed.
- Responsiveness is only 15 milliseconds, without braking and delays.
- The device is easy to install, glued to the surface with Velcro, can be placed vertically, horizontally and upside down.
- Power is provided by one element of the CR2450 format. The battery guarantees 2 years of work without any interruptions.
- With a polyolefin optical lens and pyroelectric infrared sensors heat, the device accurately detects movements around the room.
Buy Xiaomi Mi Smart Home Occupancy Sensor
If you are away or at work and are worried about the safety of your home, then motion sensors will immediately report activity in your home through an application on your smartphone. With the additional installation of the camera, the application also broadcasts everything that happens around the viewing perimeter. Buying Xiaomi Mi Smart Home Occupancy Sensor is an excellent security solution for you and your loved ones.
Manual for Xiaomi Mi Smart Home Occupancy Sensor
It will not be difficult to understand the user settings with the instructions for Xiaomi Mi Smart Home Occupancy Sensor. In just two steps you can connect and configure the device. Start by inserting the key into the sensor connector, then follow the prompts in the application. The characteristics of Xiaomi Mi Smart Home Occupancy Sensor allow you to plunge into the world high technology with the most intuitive interface.
Warranty for Xiaomi Mi Smart Home Occupancy Sensor
All motion sensors are thoroughly tested at every stage of production. Direct deliveries from the manufacturer provide high quality each item. Before sending your order, we re-check the operation of the device, the packaging and the presence of stickers confirming the originality of the product. With the purchase, you get a guarantee for Xiaomi Mi Smart Home Occupancy Sensor.
Specifications of Xiaomi Mi Smart Home Occupancy Sensor:
- Type: motion sensor
- Sensor Diameter: 30mm
- Sensor Height: 33mm
- Devices: any devices with operating system iOS 7.0+, Android 4.0 or later
- Motion detection range: 7m
- Motion detection angle: 170 degrees
Hello, friends
In his next review about the ecosystem smart home Xiaomi, I will talk about the wireless motion sensor - Xiaomi Smart Human Body Sensor. This is one of the most common and necessary sensors for a smart home system; it can also participate in signaling and lighting scenarios, video surveillance. About everything in more detail - further.
Where can I buy?
InspectionThe sensor is delivered in a white box familiar to Xiaomi smart home sensors, all printing is done in grayscale, looks neat and already recognizable.
The main characteristics are written on the back side, as usual - in Chinese, but from the text you can understand that the sensor works using the ZigBee protocol, that is, to pair with the sensor, you need a Xiaomi Mi Multi-functional Gateway, uses a CR2450 battery and operates at temperatures from -10 to +45 C
Inside the box, protected around the perimeter by thick cardboard sides, there is a wireless sensor. The first time - the impression, like from the humidity sensors and the smart cube - "how small it is." I expected it to be small, but still smaller than I thought.
In the kit, from the useful - only the sensor and one round piece of double-sided tape. Spare as in the same temperature and humidity sensors - no.
The sensor has the shape of a small barrel, on one side of which is the Xiaomi smart home logo.
The other side is a battery cover that opens with rotation, on which some data is applied, apparently the year of manufacture, and the type of battery. Also on the lid there is something like a round rubberized leg.
Under the cover is a Panasonic CR2450 cell. Replacing the battery is easy and fast, you don’t even have to peel off the sensor - just turn it, the cover will remain in place and the sensor - in your hand - all you have to do is change the battery.
Although the dimensions are indicated on the box, but out of habit I will take measurements - diameter 30 mm
The height of the "barrel" of the sensor is 34 mm, so geometrically it is almost an equilateral cylinder
Sensor weight - only 18 grams
To pair with the gateway, you will need a paper clip (not included) - such as goes to smartphones, for a SIM tray. I used a paperclip from a Little Square camera, but just a straightened paper clip will do. There is a hole on the side of the sensor, behind which there is a pairing button.
To connect, you need to launch the Xiaomi Mi Multi-functional Gateway management plugin, then go to the devices tab and start the wizard for connecting a new sensor. Next, choose a motion sensor. After that, you need to, using a paper clip, press the pairing button and hold until the sensor blinks blue three times. After that, it remains only to choose the room in which the sensor will be located and one of the three options for icons.
After that, a new sensor appears in the list of devices. A separate plugin is also not installed, as in the case of the cube. When you click on the sensor - go to the control screen. It has two tabs - Log, which records all cases of sensor triggering and a script window. There are several recommended scenarios in the scenario window - all of them offer to turn on and off lamps, sockets, electrical devices by motion detection.
In scenarios, the sensor can only act as a condition, which is generally logical. There are 6 options to choose from - motion detection and vice versa - no movement for 2, 5, 10, 20 and 30 minutes.
Examples practical application such as night lighting. As a script instruction, which is launched upon motion detection by the sensor, it is launched Light up for adjustable period of time - brightness 1% of full s automatic shutdown In a minute.
The duration of the scenario, for example from 22:00 to 08:00 - at finished script displayed in the Chinese time zone (if selected, the local time is indicated)
The next example is lighting control in a dark hallway. We come in from the street, in the hands of the bag, and there is no need to grope for the switch - the light turns on by itself. While the sensor registers movements, the light will be active, and after you leave the hallway, the light will turn off by itself, you won’t have to return.
Another option is a scenario in which, when a motion sensor is triggered, the recording of an alarm video will be activated along with a notification to the control device.
Since we are talking about security, then of course you need to set up the alarm mode on the Xiaomi gateway. To do this, in the scenarios tab there is a special section - Arm, which is responsible for setting up the alarm. Let's go through all the settings - Arm Timer - the days and hours of the alarm, when the parameter is enabled - the alarm is set automatically. Not required condition- can be activated and disarmed manually. The condition for triggering the alarm - put a tick in front of the motion sensor. If there are several sensors, you can select all.
Next, select the alarm activation interval. This is the time between when the alarm was activated - and arming. By clicking on the Alarm on button - you have 15 seconds (in the screenshot - an example) to leave the motion sensor coverage area. And it remains to choose the type sound signal, its volume, duration, sending a notification to the control device. Yelling must be said very loudly, uninvited guests - I think they will not be operating around the apartment when this alarm goes off. It will be fair to note here that due to the jittering of Chinese clouds, sometimes (not always) there is a slight delay - up to a minute, no more, between setting the alarm and responding to the sensor. But after a minute has passed since the activation of the security mode, it works 100%.
I’ll also give an example of a security scenario, in which a motion detection light turns on and illuminates the alien, the camera shoots an alarm video, the gateway creates a pleasant musical background with a police siren, and you receive a notification that the motion sensor has been triggered.
Sensor, due small size and weight - easy to arrange in right place, the complete adhesive tape easily holds it on the surface in any orientation - above or below it. The place must be chosen not conspicuous and so as not to accidentally hurt or knock down the sensor. You should also consider using the sensor in different scenarios at the same time.
For example, in this order, I took two sensors at once and chose the locations in such a way that the entrance to the apartment and the corridor connecting the rooms are controlled. Thus, the sensors work in two directions - lighting control and security. Scenario - "Leaving home" - switches the gateway into armed mode, deactivates all unnecessary scenarios for lighting control, etc. The second scenario - "Returning home" - disables the alarm and activates scenarios in which one of the sensors turns on the light in the hallway and turns it off after two minutes of no movement, the second turns it on at night light backlight if it detects motion along the corridor.
The number of scenarios in which each sensor can operate both simultaneously and separately is essentially unlimited.
The sensor - I consider one of the most necessary for a smart home system - because it will allow the system to recognize the presence of a person, and, depending on this, run the necessary scripts.
Video version of my review:
All my reviews of Xiaomi devices in chronological order- List
Thank you for your attention - see you soon.
Ease of installation.
"> Smart Occupancy Sensor is the guarantor of safety in your home. A small plastic box recognizes the movements of people. It is an essential part of the Xiaomi Smart Home system, as it can activate or, conversely, turn off various electrical appliances. The amazing abilities of Xiaomi Sensor help save energy.
Occupancy Sensor Benefits:
Works with the Mi Home ecosystem.
Allows you to organize the inclusion / deactivation of devices in the presence of the owner. For example, as soon as the owner of the apartment comes home, the lights come on and the electrical appliances turn on. If a person leaves the area, the motion sensor turns them off.
Synchronization with a smartphone allows you to customize the Occupancy Sensor for yourself.
The reaction speed is impressive - 15 milliseconds. No delays or slowdowns.
Ease of installation.
The device is equipped with a special Velcro that allows you to fix it on any surface - both in a horizontal and vertical position.
It uses only one CR2450 battery for power. It is enough for 2 years of continuous work.
The installation of an optical lens, pyroelectric IR sensors made the Xiaomi sensor as accurate as possible.
Where to buy Xiaomi Sensor in Russia?
You can place an order on our website by sending the Xiaomi motion sensor to the basket or by calling us at the phone number. If you are at work, and at the same time you are worried about the safety of your home, Xiaomi sensors will become the best choice. They will instantly report any activity in your home. Installing a Xiaomi camera will ensure the broadcast of what is happening. Therefore, buying an Occupancy Sensor will great solution for maximum security of property, people close to you.
Motion Detector Xiaomi MiJia Smart Home Occupancy Sensor is one of the main elements for creating a complete Xiaomi smart home ecosystem, which operates under the control of the MiJia Smart Home Gateway 2 main control unit. mobile application script. Smart Home Occupancy Sensor makes it easy to automate routine and everyday activities without unnecessary movements and button presses. With it, you can customize automatic switch on light, audio or video equipment, or heating just at the entrance to the room.
During your absence in the house, the sensor can be switched to the "Vigilance" mode. If motion is detected, the detector will alarm your smartphone and send a signal to the MiJia Dafang Smart IP camera to start recording. This convenient way The application of the sensor is suitable not only for guaranteeing safety in the house, but also useful for looking after pets or providing control over children or hired personnel.
The sensor itself must be paired with the main control unit for correct operation. You can control and configure sensors using the Mi Home app, which also controls other smart home devices using the ZigBee protocol, such as:
- - this is an adapter for a conventional outlet, which allows you to activate the power supply to the device according to a signal from sensors or according to a schedule. Synchronized with and configured through a mobile application.
- / - light switches, which are also tied to and can switch the light on command from the phone from the Mi Home application, according to a schedule or according to a signal from sensors.
- - sensors for installation on a window or a door. Serve as a trigger to activate predefined scenarios when contact is interrupted. They can be used to automate everyday activities of a routine nature, such as turning on lights or music, as well as to ensure security when switching to the "Vigilance" mode.
- - "smart" Full HD camera is ideal for looking after small children or animals in your absence, and can also be used for security purposes. When it receives a signal from the sensors on the door or windows, or from the motion sensor during the "Vigilance" mode, it will immediately start recording video.
- - a wireless button to create scripts and run them with one click.
- - water leakage sensor, which fixes the leakage already at the level of 0.5 mm. It is equipped with light and sound alarms and is capable of sending alarm notifications via an app to your phone.
- - a thermometer combined with a humidity sensor. Monitors room temperature and humidity levels. You can set a scenario for it, according to which, when a certain temperature is reached, the air conditioner or thermostat will be turned on.
- - a universal device management controller in the Xiaomi MiJia family running . Allows you to facilitate the execution of human scripts, eliminating the need for you to log into the application every time.
Peculiarities:
- The small size and diameter of the device allow it to be placed anywhere, and the use of several sensors simultaneously or in conjunction with sensors for doors and windows further increases the number of possible scenarios and actions.
- Versatility and many use cases - from household tasks to security.
- Wide 170° field of view and high motion detection range up to 7 meters for maximum visibility.
- Support for work in the Xiaomi MiJia Mi Home system using the ZigBee protocol.
- Simple and easy installation without the need for wiring.
- Battery life up to 2 years.
Specifications:
Equipment:
- Motion sensor - 1 pc.
- adhesive tape for mounting - 1 pc.
- User manual - 1 pc.
If you decide to install a Xiaomi smart home system, then you definitely need a motion detection sensor.
The presence sensor is one of the most popular devices in all automation systems. It can be used in both lighting control and security scenarios. Let's analyze it in more detail.
The sensor is supplied separately:
So in the Xiaomi Smart Home Kit automation kit:
Package includes instruction and one piece double sided tape for installation in a suspended state (it is worth noting that in other Xiaomi devices, a spare tape is also included in the kit). Despite the fact that a paper clip is needed to connect the device, it is not included in the kit (it comes with a gateway, without which the sensor is useless).
The device itself has relatively modest dimensions: 33 mm in height and 30 mm in diameter, this allows you to place the sensor absolutely anywhere. But do not forget about the scope of the sensor:
The package of this motion sensor does not include a bending leg-stand (as in).
For a small fee, we get a compact wireless motion sensor that will look good in any room.
If you decide to set up a Xiaomi automation system at home, then be sure to consider purchasing a motion sensor. Leave questions about the operation of the device in the comments or
