How to choose an electric heat gun (220V)? Rating. Which heat gun is better: features of using different types and calculating the required power Electric guns for heating
Heat guns are used to quickly warm up unheated or poorly heated rooms during the cold season. Compared to other heating options, heat guns are the fastest, cheapest, and most effective way to raise the temperature in a room.
Which heat gun is better
There are three types of heat guns, depending on the principle of air heating used, these are electric, gas and diesel. Electric guns are suitable for raising the temperature in residential premises, and gas and diesel ones are best used exclusively in non-residential and well-ventilated premises. Each heat gun has its pros and cons, and you can evaluate them by looking at the rating of the best heat guns.
They operate on the same operating principle as conventional fans. The difference in design, power and performance, guns are much better at handling heat.
Electric heat guns are ideal for heating residential areas because they do not emit harmful compounds and do not affect the quality and cleanliness of indoor air in any way. As heating elements, a spiral or ceramic plates are used.
Gas
The efficiency of such guns is much higher than that of electric guns, so they can be used in large rooms. But it is important that in this room there is good ventilation and permanent access fresh air. Also, when working with gas, safety precautions should be observed, as it is explosive.
Diesel
For heating, a diesel engine and liquid fuel are used. There are two types diesel guns— with direct and indirect heating. In guns with direct heating, combustion products immediately enter the surrounding air, so they must be used in ventilated rooms. In guns with indirect heating, the products of combustion are only partially released into the air, so they can be used in rooms with medium ventilation.
There are also infrared diesel heaters that do not heat the air, but objects that are in the room.
The best electric heat guns
This is an electric heat gun with a ceramic heating element. She has two power levels - 1 and 2 kW., This is enough to increase the temperature in a room of 20 square meters. meters, 43 degrees. The cannon itself weighs only 3.5 kilograms, so it can be easily carried between rooms. The model is suitable for heating small living spaces because it is safe, compact and convenient to use.
- There are two power levels;
- Compactness and lightness.
- Cannot be used around the clock, after 22 hours of operation a break is required to cool the heating element;
- There is no temperature indicator, so the gun cannot turn off and cool down on its own when overheated.
Eugene, 54 years old. This gun is not suitable for professional use because it doesn't have enough power. I constantly use it more as a heater in rooms where the design of the heater is not important, such as the basement, garage. For its price, a fairly high-quality assembly and a compact size and normal power. Overall happy with the purchase.
The electric heat gun, unlike the previous model, reaches a power of 5 kW, which allows you to heat the room more quickly, but at the same time, according to the manufacturer, it can only increase the temperature by 40 degrees.
It is also impossible to use this gun around the clock, after 24 hours of operation it must be turned off and cooled for two to three hours. The capacity of this gun is 400 cubic meters of warm air per hour, which is about three times more than the previous model. But the increase in power affects the size of the device itself, it weighs more than 6 kilograms and is not so compact.
- High performance and power of work;
- Possibility to use it continuously 24 hours.
- Size and weight, this cannon is difficult to carry between rooms;
- The absence of a temperature sensor, so it is necessary to constantly monitor the temperature of the gun so that it does not overheat.
Anna, 35 years old. We bought a cannon for the house to quickly heat the rooms. We tried, as a result, from a temperature of -2 to 27 degrees, a room of 16 square meters. meters warmed up in an hour, then tried in the kitchen, 10 sq. meters in about 40 minutes. At the same time, I heated at a power of 5 kW. After the test drive, I thought about buying a second one of the same kind to heat the rooms faster, an indispensable thing, especially if there is no wood heating in the country house!
This heat gun is similar in its characteristics to the first option, but it has a significant advantage - it is compact, the model weighs only 1.7 kilograms. Otherwise, its power reaches the level of 2 kW, and the productivity of warm air is 130 cubic meters per hour. It is not recommended to use it in rooms with a large area, as it will take several hours to heat them up.
- The presence of a drip thermostat, with high heating, the gun should automatically turn off for cooling;
- Possibility of use in residential premises;
- Compact and lightweight, the heat gun weighs less than two kilograms and even a child can carry it.
- Low power and performance, it takes more than a few hours to heat large rooms;
- Do not use the cannon continuously for longer than 20-22 hours.
Oleg, 43 years old. The manufacturer claims that there is a capillary thermostat, I did not find it. At the same time, there is a thermostat in the gun at the same level as in a conventional iron, which does not work to heat the air, but to heat the body. Another significant drawback is that the mode switches are not set to current, the input wires are simply inserted and pressed by spring-loaded plates. Also, when the thermostat is activated, the fan turns off at the same time as the heating element. But if you refine it, then for your money it’s a pretty good device.
According to its technical characteristics, the model compares favorably with the previous versions. Its peculiarity is that when heated, it does not dehydrate the air, so it can be used for an apartment without additional problems.
In addition, despite the low power - 2 kW., It has a fairly high performance of warm air - 190 cubic meters per hour. This is enough to warm up in an hour small room to a comfortable temperature. It can also be used both for a summer house and for a garage, because it is compact and easy to carry.
- There is an air humidity control system, that is, when using this heat gun, the air in the room will remain with normal humidity;
- There is a thermal control, that is, the gun will automatically turn off when overheated, this will help to avoid fires and short circuit;
- Lightweight and compact - this gun is easy to carry between rooms.
- Loud fan that is very audible during operation.
Artem, 32 years old. I bought it to heat the locker room at the facility, this is a basement with bare concrete, an area of \u200b\u200babout 12 square meters. meters. With the help of a cannon, I heated it up to a comfortable temperature in about two hours, while the room became very warm, during the night even wet clothes and shoes on hangers had time to dry. A month has passed since the purchase, I use it around the clock, without turning it off, until it fails, but there are several drawbacks. When operating at 1 kW, it blows cold air from below. The fan is also very loud, you can hear the roar at night. Insensitive thermostat.
Unlike the previous ones, this is a gas heat gun. Therefore, by using a different principle for heating, it is more efficient. Its maximum power is 10 kW. and the productivity of warm air is 300 cubic meters per hour.
The package of this gun includes a thermal sensor and protection against overheating, that is, when the permissible temperature level is exceeded, this device automatically turns off. This avoids dangerous situations. Its disadvantage is that there is no fuel indication level, so it is impossible to determine how much fuel will last and when to change the cylinder. But fuel consumption can be roughly calculated from the manufacturer's data, he claims that no more than 0.86 kilograms of gas is consumed per hour.
Since this gun gas heating, it should not be used in residential areas, it is only suitable for a garage that has good ventilation, as well as for technical work.
If you need to quickly warm up an unheated garage or any other room, you can use the appropriate equipment. An excellent example is a thermal electric gun (220V). How to choose such a device, you can find out if you read the article. Similar units they save when construction or finishing work stretched out for an indefinite period, and the cold is already approaching.
If from time to time you need to warm up a frozen car, then you can’t do without a heat gun at all, because quite often the car refuses to start in the cold. Given the fact that the range of such devices is truly huge, you must understand how to choose a gun. This task can be quite difficult. But if you follow certain rules and take into account important factors, then you can make a profitable purchase.
It will be possible to use the gun not only for the garage and construction needs, but also for, as well as, if necessary, drying the room after finishing works. Experts advise to determine the power of the device, design features and manufacturer.
How to make a choice based on technical characteristics?
The first thing you should pay attention to is what parameters will be optimal for the operation of the gun. The choice must be made according to the appropriate voltage and power. As for the last characteristic, one of two calculation options can be used when choosing it. Most simple technique, which will allow you to determine what power to choose, is as follows: for every 10 m 2 of the room you will need 1 kW of power.
If a room of 4 x 6 m is to be heated, then the simplest calculations will show that the power of the gun should be equal to 3 kW. This value can be determined as follows: 4 times 6, which is equal to 24 m 2. Taking into account the recommendations, we can conclude that the power reserve is approximately 20%. The calculation will look like this: 2.4 times 1.2, which will give 2.88 kW. The closest value is 3 kW, it is with this in mind that you need to select a device for heating the garage.
Alternative power calculation option
If you are faced with the question of how to choose a thermal electric gun (220V), then you can use another calculation option. The result will be more accurate. This approach is relevant when choosing a heat gun for the home. In this case, the formula takes into account not the area, but the volume of the room, as well as the coefficient of thermal conductivity of the walls.
The formula looks like this: P \u003d (V * dT * Kt) / 860. Here, the volume of the room is denoted by the letter V and is defined as the area, which is multiplied by the height of the ceiling. The temperature difference between indoor and outdoor is dT. Thermal conductivity coefficient - Kt. If the room has walls with good thermal insulation, then this value will vary from 0.6 to 1. When the equipment is selected for a room with medium thermal insulation or brick walls in two rows, then the coefficient will be equal to the limit from 1 to 2.
It is also necessary to select a heat gun for rooms whose walls are made of single-row brickwork. In this case, thermal insulation is usually poor, and the thermal conductivity coefficient will reach 3, while its minimum value is 2.
When choosing a heat gun for a dilapidated hangar from a profiled sheet or boards, you must take into account a coefficient from 3 to 4. The number 860 is the number of kcal in one kilowatt. Before deciding how to choose an electric heat gun (220V), you must understand the essence of the calculation, which can be considered with a specific example.
If we are talking about the choice of equipment for the garage and heating the car, then you can take into account the same volume of the room 4 x 6 m. And the ceiling height can be taken equal to 3 m. Inside the building, the air temperature should be +15 ° C, while outside -20 °C The difference is 35 °C.
When the garage is well insulated, the coefficient will be equal to 1. The calculation formula in this case is as follows: 72 x 35 x 1 = 2520 kcal / h. In order to convert this value to kilowatts, you should divide it by 860, which will give you 2.93 kW. At the same time, it is important to take equipment with a power reserve, as a result, the desired parameter will be equal to 3.5 kW, which is quite enough.
For reference
When deciding how to choose a thermal electric gun (220V), you should pay attention to the fact that there is a conditional classification of equipment by power. Fan heaters are those units whose power reaches 5 kW; everything above is guns.
How to make a choice based on the duration of work and noise level: reviews
Experts advise to pay attention also to the duration of the gun. When heating a room, such devices should work without interruption for a fairly long time. A thermal electric gun (220V), reviews of which you can read below, may have a value that looks like this: 24/1 or 24/2. In these cases, the duration of work is around the clock with a break of one or two hours.
To do right choice according to the characteristics, consumers are advised to pay attention also to the noise level during operation, as well as the operating temperature range. Familiarizing yourself with the range modern devices, you will be able to understand that they are capable of operating at temperatures ranging from +5 to +40 ° C.
Choice by room type
Another rather important criterion for choosing a heat gun is the type of room. If you want to purchase a device for the home, then it must work on the principle of not direct heating. But before buying a device for a greenhouse or heating a car, it is better to pay attention to simple options which eliminates the need to overpay.
When choosing a gun for temporary heating, you must take into account the fact that a portable case is better suited for these purposes. If the heater will have to be in one place for a long time, then you should choose a stationary device that allows you to fix it in a certain place in the room.
Choice by additional options
A thermal electric gun (220V) is also selected taking into account additional factors, for example, the presence of a temperature controller. Modern technology necessarily has such functionality, however, if you want to save money, it is better to select a device with at least a step regulator. It will allow you to control the efficiency and performance of the device.
It should also contain the function automatic shutdown if overheating occurs. When the case accidentally falls and the heating element overheats, a fire hazard situation arises in which the thermostat should work. When choosing a thermal electric gun (220V), you must also take into account the material at the base of the body. It is better to prefer metal than composite or plastic.
The first option is more durable, in addition, in the event of an accidental power outage, a hot heating element will not be able to damage the metal case. As for plastic, it can melt if overheated and cause a fire.
If one of your goals is to quickly warm up the room, then it is better to choose a cylindrical type device, because they have a spiral as a heating element. This option is great for heating the garage, which is especially important if you need to warm up the car in cold weather.
What else is important to consider?
When choosing an electric heat gun (220V) for a garage, you must also take into account the presence of a service center in your city, because if the equipment fails, repairs can be very expensive. But if the gun is selected for a summer residence or a private house, then it is better to purchase a rectangular design, which seems more rational, because there is a grid heating element inside, which does not dry the air so much and is not so dangerous in terms of spontaneous combustion. The most powerful air flow can be achieved if using equipment with a one-piece stamped impeller. When choosing a heater for a construction site, for example, for installing a stretch ceiling, you should prefer a device with just such a fan.
Popular rating participant: "Interskol TPE-2 286.1.0.00". Reviews
The rating by popularity will not be complete if one of the models from the Interskol company is not included in it. This device is bought a little less often than those described above, therefore it occupies only the third place. Considering equipment for space heating, according to consumers, you should definitely pay attention to the electric gun, the brand of which is mentioned in the subheading above. Its cost is 2119 rubles, and the equipment itself, according to users, can be used for rooms up to 20 m2.
The body is cylindrical and made of steel. Its surface has an anti-corrosion coating. made of fechral spirals. Air consumption reaches 240 m 3 per hour. The equipment weighs 4.5 kg. Its dimensions are 240x240x310 mm.
This thermal electric gun (2 kW, 220V) has many positive features, namely:
- protective grille;
- stable support;
- bimetallic safety thermostat;
- ease of management.
During operation, the device is able to increase the temperature in the room by 25 ° C.
Making a gun with your own hands
You can make a gun from thin sheet metal, which will go to the body. In the process, you will need a heating and electric motor. To fix the spiral, you should take care of the presence of an insulating block. It is important to include switches, terminals and wires in the design.
Work methodology
Homemade electric heat guns (220V) do not have the same level of security as factory models, so you need to be nearby when they work. The spiral is attached inside the body with insulating pads. Having prepared the bent halves of the metal, you can make a body out of them, which is fixed into a single whole with self-tapping screws. An axial fan is installed at the end of the resulting pipe. It and the heating element must be connected to the network through the switches, after which we can assume that the electric gun is ready for operation.
Conclusion
Before choosing one or another model of an electric heat gun, it is necessary to evaluate all its characteristics. Among the strong, but the most important is the power, which is selected taking into account several factors. Before making a purchase, you should take into account the insulation of the room, as well as its area.
It has become much easier to monitor the air temperature in poorly heated rooms during the cold season with the advent of special equipment. But most of it is not able to solve the problem instantly, which can be critical in various industries and warehouses. The only right decision in this case would be to pay attention to the best heat guns that will create the desired microclimate in just a few minutes. After reviewing our rating, you will be able to decide which model you need - running on gas, diesel fuel or electricity, as well as form an approximate budget. As a result, choosing the most reliable equipment will not be difficult.
In the early 1990s, all products were supplied mainly from Western Europe and Asia. In the 2000s, good alternatives from the field of developing climate technology began to appear on the CIS market. And for more than 15 years, some Russian brands have been successfully competing with their foreign counterparts, while adhering to a sparing pricing policy. Who they are, these leaders, you will learn from this list:
- Resanta– the year of birth of the Swiss company is 1932. It is a leader in the manufacture of heaters for both commercial and private use. It provides a 3-year warranty on all of its products.
- ballu is a leading manufacturer of climate technology for home and production, which began its activities in 1980 in Thailand. The sales geography of its products covers all of Europe, Asia and partly even North America.
- Frico – European brand, under which equipment is created to control and control the temperature in the room. All products have AMCA and ISO quality certificates.
- Master is a manufacturer of air handling systems for both large and small areas. It offers both direct and indirect heating models.
- Kraton- one of the few Russian brands that produce climate equipment from the "budget" category and at the same time European quality. The firm has been operating since 1999 and has representative offices in 80 cities of Russia.
- bison- Another one Russian manufacturer building tools and equipment, which has its own laboratory for pre-sale product testing.
- Interskol- a company that produces construction equipment and tools, which has its own factories and showrooms. This is the only trademark in the CIS in its niche, officially recognized by the EU.
Rating of the best heat guns
So that you can choose the best option for you, we have selected about a hundred good models and 9 winners have already been determined among them. In this, we relied on the opinion of experts, customer reviews, the cost and brand of the product, various technical specifications. These include:
- Fuel consumption;
- Dimensions;
- Thermal power;
- Type of power - electricity, gas or diesel fuel;
- Ignition method;
- Degree of protection against overheating and human;
- Noise level;
- The degree of wear resistance of the body;
- The quality of thermal insulation;
- Performance.
The best heat guns
This equipment is selected for instant heating of air in residential premises, garages, trading floors, and in industries. Its functioning is possible due to the heating of a special element that passes the air flow from the fan through its design, which ultimately creates a warm air stream. It can be powered by electricity, gas (butane or propane) or diesel fuel.
The best electric heat guns
This is the most reliable technique in terms of fire safety and release of toxins. It can be used in both small and large spaces. It is characterized by neat dimensions, due to which it can be easily carried and transported. The advantage of this option is also that as a result of the work no odors are emitted and strong noise is not generated.
Resanta TEP-2000K
The electric model will provide heat to a room up to 25 square meters. m. It functions due to the round heating element in the heating and ventilation mode. If necessary, you can choose any power up to 2000 watts. The body is equipped with a metal grill that protects the device from debris. The equipment is not in danger of failing due to overheating, since it is protected from this by a special system. The unit is not subject to corrosion and is easily transported due to the presence of a handle. Another advantage is the absence of strong noise. The temperature returns to normal in 15-20 minutes. The only negative is not long enough network cable, you will need to carry.
Advantages:
- Ease of carrying;
- Easy to manage;
- Small size;
- Impact-resistant case;
- Work in two modes;
- Operation is completely safe.
Flaws:
- In large rooms it will be irrelevant;
- Short cord;
- Warming up.
What to expect from this gun, see this video:
KRATON DH-30/1000
Diesel heat gun operating on the principle of direct heating. It can only be used in rooms where a person is not permanently located. It is characterized high level Efficiency (about 100%), up to 2.8 kg of fuel is consumed per hour, which is loaded into a 33-liter fuel tank. The product weighs 28 kg, so wheels are provided for its transportation. Users can control fuel consumption with a special regulator. The tightness of the product is at a height, the device is protected from combustion by an automatic shutdown system that is triggered when the fuel supply is cut off.
Advantages:
- Good performance;
- Large fuel tank;
- Shows fuel level;
- Comfortable handle;
- The presence of wheels.
Flaws:
- Heavy;
- Fuel consumption is not economical;
- Does not always ignite the first time;
- The warranty is not long.
User manual for KRATON DH-30/1000 can be found here.
Zubr Master DPN-K9-21000-D
This is one of the largest heat guns, designed for 55 liters of fuel, which is consumed at a rate of 1.6 liters per hour. To control this process, there is a level sensor. This option is suitable for rooms with good ventilation, it can heat the air up to 30 ° C. The device operates at a power of 21 kW. No foreign objects will get inside thanks to the metal grill on the case. It is very convenient to display information about the current temperature on the display and the presence of air purification filters.
Advantages:
- Reliable flame control system;
- Case made of heat-resistant steel;
- Convenient form;
- The presence of wheels;
- High power heat gun.
Flaws:
- Too much weight;
- bulky;
- Noisy work;
- The handle is short.
More detailed instructions from the manufacturer.
The best gas heat guns
This equipment is less popular than electric or diesel, it is made of high-strength and heat-resistant metal. The engine is usually electric. The main components are thermostat, burner and heat exchanger. The device requires butane or propane to function. It can work continuously and heat an area up to 200 square meters. m.
RESANTA TGP-10000
This is a relatively powerful model that runs on gas with direct heating. It is mobile, as it weighs almost 6 kg, has a comfortable handle and a neat oval shape, suitable for rooms up to 100 square meters. m. In an hour, the device “eats” about 1 liter of butane or propane. There are no problems with pressure, it can warm up the air to 60 ° C, if necessary, it can be used as a fan. The device requires an electrical connection. This option cannot be used for personal use.
Advantages:
- Low fuel consumption;
- High efficiency;
- Easy transportation;
- Light weight;
- Protected from overheating.
Flaws:
- Short warranty period;
- Complicated maintenance;
- Compressed air must be used to clean the inside of the product.
RESANT TGP-10000 sometimes has gas leaks, in which case it is necessary to shut off the gas supply valve on the fuel cylinder.
See more to make your choice.
Watch a video review of this model:
Master blp 33M
A gas heat gun will work effectively in rooms that can be ventilated, since it supplies air at a rate of 300 m3 / h. The case is resistant to various damages and moisture, does not heat up. The efficiency is about 96%, no waste remains in the combustion process. The flame is controlled by a special system automatically, an electrical system is used for ignition. The product weighs 8 kg and "eats" up to 4 liters of gas per hour. The Master blp 33 M model is suitable for production workshops, warehouses, shops.
Advantages:
- Light weight and dimensions;
- Economical consumption of electricity;
- Ease of maintenance;
- Warms up instantly
- Greater heating efficiency;
- High degree of protection.
Flaws:
- Expensive;
- Poor stability on the surface;
- Cannot be fixed to the wall;
- Requires frequent replacement of gas cylinders.
Before dwelling on this model, it is worth Master blp 33 M.
Interskol TPG-10
A budget heat gun is relevant not only for heating rooms, but also for drying ceilings. According to reviews, gas consumption here is economical, it takes no more than 0.6 liters per hour. The device operates on butane and propane; if there is a threat of overheating, the installation turns off automatically. The device is protected from corrosion by a special coating. The maximum serviced area should not exceed 100 sq. m. The equipment works almost silently, only wheels are missing here for its transportation, although you can do without them due to the presence of a handle, small dimensions and weight.
Advantages:
- Good build;
- High power;
- Affordable price;
- Low noise level.
Flaws:
- Short gas hose;
- No temperature indicator;
- You can not control the level of gas consumption.
Interskol TPG-10 is often used at construction sites and in agriculture.
Here you can use Interskol TPG-10.
Which heat gun is better to buy
For small residential premises, a model with a power of up to 10 kW is enough, but here they should be used electrical devices. For industrial purposes, already gas or diesel plants. When and what product is better to choose:
- For small room up to 25 sq. m., in which people are constantly located, equipment operating at a power of 10 kW, for example, Resanta TEP-2000K, will be quite enough.
- Warehouses, rooms and retail outlets up to 60 sq. m. will help to heat Ballu BHP-M-3 and Frico Tiger P51.
- Technical areas over 800 sq. m. it is better to heat with gas guns - Master blp 33 M and Interskol TPG-10.
- As the main source of heat, diesel plants are needed that can serve an area of more than 200 square meters. m. These include Bison "Master" DPN-K9-21000-D and Master B 35 CED.
All the best heat guns that are included in our rating are very popular and have a large number of positive reviews. Therefore, whichever model you choose, most likely, it will meet all your expectations.
This unit is designed not only for heating residential premises, but can also serve as a drying element, which gives it even more good points. The heat gun is especially popular with buyers whose homes do not have a heating system. The most reliable device for heating a house or a garage will certainly be a heat gun, and its choice, application, types and advantages will be discussed later.
Types of heater guns
A heat gun is a device with many functions. It can serve as a heater, used for technological drying, and most importantly, the presence of a centralized heating system does not matter for this unit, since it is connected directly to the mains.
The heat gun has the ability to quickly heat any kind of premises, whether it be a garage or a large unheated room in an apartment. The device can quickly heat up and also save desired temperature in the room. A detailed study of its existing types will help you choose a heater gun.
Types of thermal gun heaters:
- Infrared heat guns heat the room due to their function of burning fuel and turning it into infrared radiation, which spreads over the entire area, while creating the necessary heat.
- Electric heat gun - in an electric heat gun, a fan installed inside is responsible for heating, equipped with a heating element, which start the process when connected to the mains.
- Air heat gun - the basis of the work is not just blowing air, but shooting it, due to which a room of any type and size is quickly heated.
- Oil heat guns.
The last most economical types of heat guns are certainly oil-based, since their principle of operation lies in the fact that the recycled oil burns and gives off heat. A feature of an infrared heat gun is that it mainly heats objects, not space, which is why it is in great demand when performing repair work.
A gas heat gun is the most durable type of these devices, as they easily tolerate transportation and any temperature changes.
The principle of operation is based on combustion liquefied gas propane in the combustion chamber. The water heat gun has the ability to heat colossally huge types of premises. It takes in cold air, processes it through a water filter and releases heat outside.
Usually, convectors, warm baseboards, heaters, underfloor heating and other heating elements are used to heat rooms, but few people know about such a reliable device as a heat gun. Reviews of heat guns can often cause controversial issues and opinions about its use, application and types.
It is necessary to select such a device depending on the type of its application.
Choosing a heat gun was very difficult. The car was constantly freezing in the garage, but thanks to the propane heat gun, we managed to cope with this, and quickly, because this device has a crazy air flow.
Functions that any heat gun performs:
- Quickly warms up unheated rooms (garages, with a large area, including the car in it).
- In large workshops, an infrared heat gun can heat not only the air, but also objects.
- Will defrost any car at any sub-zero temperature very quickly, thanks to its powerful stream of heated air.
- Widely used in construction work, namely during the installation process stretch ceilings, during painting and plastering, etc.
It is also suitable for the home, because it does not make noise - it is a reliable heater. The rating of heat guns varies depending on the price, type and application. Before buying this device, it is best to know what functions it can perform and for how long.
Description of infrared heat guns
Infrared heat guns among all kinds of their competitors play special role and are released due to the fact that the heat that they radiate heats the surface on which the heat gun is directed not with a hot stream of air, but with infrared waves.
The objects that such an electric gun heats up, in the process of heating, transfer heat to the entire living space, a variant of such heating is ideal for giving.
The heating capacity of such a device has only 1 minus: low speed the intake of warm air, but it is better, since it is near it and a person can feel comfortable with pleasure.
Advantages of an infrared heat gun:
- It evenly heats the objects in the room, and consequently the air, which contributes to the low flammability of residential premises.
- Does not dry out the air, thereby improving human comfort.
- The heating elements and the internal component of the infrared heat gun are the same as those of the converter heating system.
The element of the infrared heat gun, which is responsible for the radiation of heat, takes the power of energy from the process of combustion of liquefied gas inside a special chamber, as a result of which it prevents the combustion products from entering the living quarters, which is very environmentally friendly. Many are faced with the question of which gun is better to buy? Choosing such an electrical appliance is not an easy task, since its selection often takes a lot of time.
Characteristics of electric heat guns
The heating system has long lost its prestige with the advent of construction market various heating elements. They are often more reliable and cheaper, and there is less trouble with them. Heat guns are very convenient as they are easy to move, transport and install.
The types of fluffs, of which there are quite a few, will help you choose the right device:
- Diesel;
- Electrical;
- Water;
- Gas;
- infrared and air.
There is something for every taste, depending on the wishes of the owner. The diesel power of any kind of heat gun is 220V, the same and max. electric power. The calculation of the cost and functionality of the heat gun showed that it is more economical than any type of heating.
The positive and negative qualities of electric heat guns are different. An electric heat gun does not have the ability to open the process of fuel combustion, which will protect human life in the event of a fire and protect against gas poisoning.
The electric heat gun does not emit any negative odors during operation.
It can be used even in small rooms that need heating. It has small dimensions. The electric heat gun is equipped with a temperature controller, which will create comfort. When choosing an electric heat gun, you won’t have to worry about filling it with elements, since it is not needed due to the fact that the device works directly from the network and is powered by electricity.
The use of an air gun-heater
In the autumn-winter period, when it is not yet turned on heating system, users always have the opportunity to purchase and connect an air heater heater. The heating capacity of the thermal gun is very large and varied, depending on the type and parameters of the device.
The range of its use is also wide, it can serve:
- For heating greenhouses;
- Even as an electric heater.
It is almost impossible to calculate how long the air gun will heat the room due to the difference in temperature, voltage and conditions. A test of almost every heat gun will show that it is a powerful air and object heating device. For office and residential premises, a heat gun for heating may be needed only as an additional source of heat, since basically such premises already have a centralized heating system. During any renovation, it is often necessary to have an additional heat source in the room so that all painting work dried out faster.
Auto repair shops often install heat guns on oil based, since they do not emit into the air harmful substances and do not pollute the oxygen in the room.
Due to the powerful descendant of warm air, heat guns can quickly heat large rooms, which significantly saves money on the purchase of other heating devices. Since the temperature drops in winter, the plants in the greenhouse need warmth. Infrared heat guns are used to heat outdoor buildings such as gazebos, which heat the structure itself.
