• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Small bench made of wood do-it-yourself drawings. How to make benches with your own hands from different materials

In a country house or in the country, every person wants to have only high-quality and multifunctional garden furniture that will not take up much space, and at the same time will perform maximum functions in the garden. Therefore, a transforming bench will be an excellent solution for a joint tea party with the family. Here you have both a bench and a table at the same time, and most importantly, you can make such a design with your own hands.

Bench-transformer - design description, principle of operation

This bench is for country house is a fairly simple design that can easily be transformed into a table with two comfortable benches. And when folded, it is an ordinary bench with a back and handrails. It will not take up much space on the territory of the personal plot and at the same time will be able to perform all its functions in full.

Functions and convenience of the bench

This is a compact and practical bench that easily turns into a fairly roomy table and two comfortable benches. Due to the high degree of mobility, it can be installed anywhere in the garden.

The only drawback of such a bench is its rather large weight, since it will take a lot of wooden boards to manufacture such a complex structure, but it will be quite stable, reliable and durable if everything is done correctly and accurately according to the developed instructions in compliance with all technological processes.

Preparation for the construction of the structure: project drawings with dimensions

Before you start building a bench - a transformer, you need to prepare all the materials and tools, as well as draw up good drawing or find it online.

We offer you a typical drawing - a diagram of a bench - a transformer with the dimensions indicated on it. The most difficult action is the creation of a movable mechanism, so initially it is necessary to prepare all the blanks, which will then be assembled together into a single transformation structure.

To make a bench - transformer will need to purchase planed edged boards and timber. Larch, birch, pine, beech, ash or oak are best suited for such a design (if possible, since it is very expensive).

The board must be well sanded, of high quality and meet all compliance standards. If you buy a board at a sawmill, be sure to ask about the quality certificate for their products, since under the guise of an oak edged board, they can sell you a completely different product, and if you are not well versed in wood, it is best to take a carpenter with you who understands the types boards and their quality.

Material calculation and tools

To assemble a bench - a transformer, we need:

• Two beams with a section of 90x45x1445 mm;
• Five bars with a section of 90x32x1480 mm;
• Two beams with a section of 90x45x1445 mm.

To work, we need the following tools:

Stages of making a bench-table

1. The first step is to make the legs of the frame. To do this, you need to cut out 8 absolutely identical bars 70 cm long and make oblique cuts on them at the bottom and top (also the same), so that you can get perfect balance when you further install the structure under a certain slope.
2. Next, we make a frame for two benches from a polished edged high-quality board. We cut out four segments of 40 cm each and the same number of segments of 170 cm. On all boards, the corners must be cut so that then two completely identical rectangles of a slightly oblong shape can be made. For their joining, we use special prepared screws or nails. But first, we drill the same holes in the boards with a drill (the length of the boards is 1.7 meters).
3. In the frame of the structure, several strong reinforcing elements must be made, which will further form a comfortable seat. To do this, we take a wooden beam and nail it in increments of 500 mm. So we will divide the structure into sections and protect the future bench from lateral deformation.
4. The legs must be screwed to the seat at a distance of 10 centimeters from all corners diagonally. We do this so that the joints are near the "seams" or a little further. Here it is very important to make the highest quality structural elements, that is, fasten them to 2 or 3 bolts that pass through the timber and the upper part of the prepared legs. It is necessary to make grooves in the beam in which we will hide the bolt heads. And under the nut, we cut off the excess with a hacksaw.
5. Next, we make a rectangular element of 70x170 cm from the beam, which we connect from the inside with additional details that ensure the rigidity of the structure. In the future, we use this element for the device of the back or countertop.
6. At the moment, we do not cover the frame with shields, as it will be difficult to assemble the entire mechanism into a single whole. It will also complicate the transfer of the structure.
7. We combine the three resulting elements into a common system. This work is quite difficult, since it will be necessary to work with large parts of the future bench - transformer. It is best to do all the work on a flat floor or on a special large table. We make all connections movable and fasten them with hinges or ordinary bolts.
8. We cut off two bars 40 cm long to fasten them between the bench and the table shield in the corners. They will be at the bottom of the shield, but on the side of the bench itself.
9. We cut off two more bars 110 cm long to make the back inclined. We fix them with screws or other fasteners at the other bench, but in this case the fasteners are not placed on the near side, but in the very center. Otherwise, we will not be able to correctly connect the two benches together.
10. After we assemble the entire structure, and carefully check the operation of each moving element, it will be possible to start sheathing the frame from the outside. To do this, we take a well-sanded edged board, but you can take a bar or chipboard (if the bench - the transformer will not constantly stand on the street). Thus, we have completed technical stage work.

The bench - a transformer can be covered with a stain and then with a water-repellent varnish, which is used to paint the decks of yachts. The varnish dries about 36 hours. But still, a varnished bench is not recommended to be kept outdoors in the rain and snow.

If the design is done correctly, and you take care of it, then it will serve you for at least 20-25 years. Very often, craftsmen replace wood with metal, which does not look so beautiful and aesthetically pleasing, but the service life increases significantly.

The second version of the transformer bench made of metal profile and wood

Materials and tools for construction

A bench - a transformer made of a metal profile is made similarly to a wooden one, but only with some changes.

To make such a bench, we need:

Construction steps

1. Cleaning up everything metal profiles from rust so that later it would be easy for us to work with the material - to weld pipes and paint them.
2. And then, according to the drawn up drawing, we cut the blanks size to size.
3. We make a seat frame. To do this, we weld the pipes as shown in the figure and, if necessary, strengthen the structure.
4. In the future, this design will serve as a table, as well as the back of a bench. We also had to change the angle a bit.
5. We weld another seat.
6. After carrying out all welding work, we begin to drill holes and twist everything onto special furniture bolts (their length must be at least 60 mm). Then we insert washers between the iron elements of the structure so that it unfolds more easily.
7. Here we see the final version of the transformer bench, where an additional strong leg was added to one of the benches and the angle and lunge of the leg in the second bench were slightly changed, since the angle of inclination was changed in the back, and it became steeper. In order for the bench not to be thrown, it was necessary to digest the structure.
8. For the legs, we cut out “heels” measuring 50x50 mm from a metal sheet so that the bench is more stable and does not “sink” into the ground if it stands on soft ground.
9. Depending on the size of the structure, we cut the boards and grind them well. These will be our bench seats and the surface of the table.
10. As a result, we get an excellent finished bench design. - transformer.

Shop decoration

Then we soak all the boards well with an antiseptic, fire retardant and let them dry. We paint with water-repellent varnish, oil or acrylic paint. We apply varnish or paint in several layers.

We will send the material to you by e-mail

To make your household plot comfortable to use and beautiful, you need to use landscape design elements such as flower beds, paths, gazebos and. Garden furniture is especially important. It is she who guarantees your convenience.In our review, we will find out how a do-it-yourself garden bench with a back is constructed. Drawings and detailed photos will allow you to make the best design.

Comfortable garden furniture is a wonderful addition to the garden ensemble

Before you make a bench for a summer residence with your own hands, let's see what varieties of this design exist. Classification can be made taking into account factors such as material, functionality and characteristics.

Benches can only be a piece of furniture designed for sitting, or have a multifunctional purpose. For example, to be used as a rocking chair or a table.Popular and original benches - swings. Designs with backs that are stationary are in demand. They are made of brick or concrete. There are also folding benches.

For the manufacture of products, the following materials are most often used:

• plastic options they are light in weight, and also endowed with resistance to all kinds of climatic changes;

• wood a great solution for any garden. This is a traditional option that has many advantages;

• metal can be used in two configurations, from profile lines or as a forged structure;

• the most durable material stone. For a bench, you can take two boulders, as well as use purchased material.

You can even make a product out of concrete. There are also combined options do-it-yourself garden benches with a back. Drawings will help to build a structure from any material. You can combine a metal frame with wooden planks. You can also combine stone and wood.

Benches can have a different design:

• a simple option - a bench without a back;
• you can build a bench with a backrest with your own hands;
• a bench with a table is suitable as an option for the garden;
• a bench with a canopy is used as a miniature gazebo.

When creating designs in an artistic style Special attention given to appearance. All kinds of shapes can be used instead of the side parts.

When creating drawings, it is important to consider general form products, as well as all dimensions of the structure. Furniture made of wood, wrought iron or stone will fit perfectly into a garden created in classical style. And plastic products are suitable for landscape design in a modern style.It matters where the bench is placed. You can put it near the porch, and also place it in the depths of the garden under a beautiful tree.

For your information! A bench made of wood can be comfortably used at any time of the year, since the level of thermal conductivity is lower than that of stone and metal.

Original benches for summer cottages made of metal and wood

You can try to make a metal or wooden bench with a backrest with your own hands. Metal products are known for their exceptional durability. However, they do not require constant attention. They can be coated with a special anti-corrosion compound only once a year.Modern designs using forged elements are performed using a welding machine.

From wood, benches with a beautiful design are obtained. Such products are suitable for almost any landscape design. To protect such structures, you can use special varnish compositions.

This will protect the wooden surface from the development of mold, fungi, as well as from sunlight. Rarely who uses fully hardware, as they cool down a lot in the cold season and heat up in the heat. Most often from this material load-bearing elements and legs are made, and the back and seat are made of wood.

Rectangles are made from the profile pipe, and then jumpers for support are welded to the side walls. You can build more functional design with armrests soft pillows and back.

To create smoother lines, you can bend the pipes. This will result in furniture with rounded edges.Board benches are popular. The design can be made in the form of a sofa, and pillows can be placed on top.

You can also build a simple bench with your own hands from wood. In this case, the legs can be in the shape of the letter X. From the boards, you can make a bench in the form of the letter P. In this case, it is necessary to ensure a rigid fixation of the seat and legs.

For your information! The use of special coating compositions will allow for for a long time preserve the natural pattern of such materials.

Photo of do-it-yourself benches made of stone

Do-it-yourself garden bench with a back can be made of stone. This material is characterized by high performance properties, as well as significant strength. Stone structures can be used for any garden style and design. The use of stone elements to complement the overall design. Such furniture looks good against the background of a building that has separate details made of stone.A bench made of stone will make a wonderful combination with stone beds, steps, ponds and paths. Similar benches are often combined with wood.

For your information! Often marble is used for the construction of such benches. Sometimes quartzite and even coarse-grained granite are used.

Photo of garden benches with your own hands: how to make from improvised materials

Plastic products are also endowed with certain advantages. Here they are:

• low weight of the structure, which ensures its ease;
• affordable price;
• a wide variety of colors;
• practicality.

You can use all sorts of combined combinations that will differ or combine in texture, color palette and materials. A good solution is a combination of stone and wooden parts.

Try to make original combined designs. It can be a sandbox bench for children, as well as a flowerbed bench.

How to make garden benches and benches with your own hands: popular technologies and ideas

To make a bench with a wooden back with your own hands, you first need to understand its design. A simple device involves a seat on some kind of support. But there are also products that have a non-standard configuration, designs with forged or carved parts, as well as furniture with armrests.

An easy solution is to use two drawers and a couple of boards. In this case, the boxes will be installed as supporting elements. They can be filled with soil and made into them beautiful flower bed. A seat is mounted from the boards, which is installed between the boxes. Be sure to sand the surface with sandpaper. For more practical design, you can replace the boxes with stone or concrete pedestals. Seats can be built from halves of logs or from processed boards. The seat must be secured with metal corners. Dowels are used to attach them to concrete foundations. And fixing to the tree can be done using self-tapping screws and through bolts.

Image	Stages of work
	You will need a detailed drawing with all dimensions
	The blanks must be polished. The rear legs are also a support for the back. All blanks are pre-marked.
	At a height of 40 cm, mark the place for fixing the seat. Then the board is cut at an angle of 20 degrees. The front and rear legs are attached with a beam.
	The side parts are attached with seat boards. They are screwed in with screws. To fix the structure, you need to strap with a beam. Two boards are attached to the back.
	Finally, a special coating is made that protects against precipitation.

Helpful information! As supports, you can use flowerpots with ornamental bushes and dwarf trees.

Bench with storage box

You can build a convenient design with storage boxes. In this case, it is worth using old furniture. Before work, you need to choose the right screws. Their thickness should correspond to the thickness of the wooden elements.

A bench with a drawer is a wonderful solution for a loggia and a balcony. In this case, you can use the old balcony. The design with a box consists of two walls, a seat and sidewalls. It is also recommended to make the bottom of the box. As fasteners, you need to use metal corners.The design can be varnished. And in order to make it comfortable to sit, additionally arrange soft pillows.

Features of a do-it-yourself wooden garden bench

It is easy to make a bench out of wood with armrests. To do this, you will need special bars for supports, boards for the back and seat, glue, saw, dowels, milling machine.First, a drawing of a wooden bench with a back is made. Then, according to the schemes, templates are cut. Contours are placed on all blanks, and why parts are cut with a saw. Sections must be polished. Holes are made in the backrests. First you need to fill them with glue, and then insert the dowels into the carrier beam. Planks are fixed with dowels. Then the bench is covered with a special varnish composition.

The secrets of designing a country bench with your own hands from a log

A practical solution is a garden bench made of logs. For sitting, the tree trunk is sawn into two parts. The backrest can be constructed from a trunk that is thinner than the seat element. Legs can be built from the remains of a log. Connections are made with metal pins. Here's how it's done:

• holes are made in the details for the pins;
• the pin is driven into the middle of the length;
• on top of the free edge is the second part and is also clogged.

Fasteners are installed with a hammer. Pins suggest a strong connection to enhance fixation. The surface of the structure must be sanded.

How to make garden benches with a backrest in ethno style with your own hands

A rustic and ethno style bench will fit perfectly into the courtyard setting. With its help, you can create a magnificent natural corner. To build such structures, wood is used with or without bark. In the manufacture of benches, you can use a variety of curved shapes. Before construction, all parts must be sanded and processed.To create a seat, an unedged board is used. All construction details are rounded.

Ethno-style benches are perfectly combined with wicker fences. In this case, you can build a back in the form of weaving. Branches should be placed tightly. But you need to leave gaps between them. Materials such as stone, wood, bamboo or even rattan are suitable for creating ethno-style furniture.

Here are some popular designs:

• For Moroccan style threaded parts can be used;

• bamboo benches are suitable for Chinese-style landscape design;

• small furniture is used in Japanese style;

• furniture in british style involves the use of solid wood species, as well as intricate patterns.

Do-it-yourself drawings of benches for giving: photos and diagrams

When performing the bench, individual needs are taken into account, as well as certain parameters. To create a quality design, you will need a drawing with all dimensions.An important point is the calculation of the amount of materials, which will depend on the final design parameters. Profiled timber is especially convenient. To round the edges, you can use a special cutter.

Do-it-yourself garden bench with a backrest drawings: double designs

Benches can have different capacities. Most often they are designed for 2-4 people. For a double structure, you will need bars and boards. To build such a product will take no more than one day. Before cutting, you need to choose the right drawings.

Do-it-yourself bench for giving from a tree: how to do it step by step

First of all, boards for sitting are being prepared. In this case, the material is cut and processed. A grinder or milling machine will help in this matter. You can also use sandpaper, but it will take much more time. With the help of bars, you can build strong legs. The areas where the fasteners will be placed must be marked.

Metal pins are used as fasteners. For greater strength, you can use special glue. The pins are also used for reliable fastening of the backrest. After marking, you need to measure the distance from the edge.

The assembly goes like this:

• the bars are stacked on top of each other;
• all parts are fastened with clamps;
• holes are made in the center and along the edges;
• through the holes made, the parts are fixed with studs.

How to make a simple design look at the video:

The seat boards are then attached to the legs with nails. After that, the nail heads can be masked with a mixture of mastic and sawdust. Be sure to cover the surface with paint or varnish.

Do-it-yourself garden bench from improvised materials: from pallets

You can make a bench from pallets with your own hands. Photo interesting options you can see on our website. Such furniture can be placed not only in the garden, but also in a country house or on a veranda. For installation work you will need three pallets.

This is how the assembly goes:

• the pallet is divided into two halves. These halves will be used for the back;
• two pallets are connected together with nails;
• then the back is attached to them;
• a mattress of suitable dimensions is placed on top.

For your information! Soft objects can be fixed with straps.

Video: how to make a simple pallet bench

Do-it-yourself drawings of a garden bench with a wooden back: a transformer option

A transforming structure is independently constructed. To do this, you need boards and bars.

Do-it-yourself transforming bench manufacturing technology

You can build a structure by doing the following:

• 3 boards are attached to the supporting part, a seat will be made of them. Insert 4 screws into each board;
• when assembling units, it is necessary to apply carpentry glue to these zones;
• legs for backrest support must be sawn from the end side. Then the legs must be connected in pairs;
• then you need to make a back, which, when transformed, will transform into a countertop.
• boards are fastened so that there is a gap;
• in the support board, it is necessary to make 3 holes with a diameter of 0.8 cm.

Here is a convenient transformer design:

To create an axis of rotation, you need to make two holes on the back leg. The backrest is attached to the base with bolts.

Article

A bench as a household item in antiquity competes with a stool. Because if a stump or boulder is already a stool, then a fallen tree is a bench or, if a bough leaves it, on which you can lean with your back - a bench. In the last two forms, she has successfully survived to this day, to which we will return.

A bench, with or without a back, “on a piece of paper” is not a piece of furniture, not a building, not gardening equipment and is not classified at all. Therefore, it exists in many different types, and no restrictions are imposed on its construction and design. The requirements of ergonomics, strength and reliability must be observed in it, but for oneself, no one has the right to make claims.

Most often, this kind of seat is street: courtyard, garden, country, park. It can be the simplest bench from a board on a pair of logs, a classic rustic bench for gatherings, no less classic garden sofa and a park bench, top row in fig.

A wooden bench is an exquisite and largely defining face of landscape design, therefore it is the object of close attention of specialists of the corresponding profile. In the 2nd row from the top in Fig. individual results of their investigations. But the prices are my respect, sometimes more expensive than a good furniture set. Here and unique material, and design, and wages of craftsmen who embody all this in the product. And most importantly - the complete absence of restrictions on cheating, because they are luxury goods.

Exclusive samples of benches / benches are technologically not so complicated that they cannot be made by yourself. However, in this article we will see how to make a bench with our own hands, being content with the usual carpentry work methods and not even the most difficult of them. It will turn out something like those on the 3-4 rows of Fig. And the acquired skills will be quite enough to create a unique one later, there would be material. You may have to master only the simplest methods of weaving from a vine on your own.

And at home?

The bench, in fact, has never been completely forced out into the street. In business and utility rooms benches-shops were, are and will be. Now they are gradually returning to living rooms: the increasingly popular studio apartment is essentially the same hut where they lived all together in one large room. And the shop for centuries has proved its ability to establish a cheerful and benevolent life in housing not for biryuks. And we will further highlight the section on some types of indoor benches.

What to do?

The seat and back of the bench are almost always wooden. The metal cools, rusts, which is why it requires annual painting, and gradually wears out. Plastic is cheap, requires minimal maintenance at first, but is uncomfortable and does not last long outdoors and / or with intensive use by random people. We are talking here about the arrangement of private properties, so we are most interested in a bench made of wood, as a harmless, most pleasant to the eye and touch material.

Note: the wooden parts of the benches are impregnated with biocides before assembly. The most affordable in this case is used engine oil. Varnish (prime, paint) the entire product after a week of drying after impregnation. Lacquer is preferable to take acrylic on water based, it somewhat protects the tree from darkening under the influence of ultraviolet radiation.

However, the supports / legs or the power frame of the bench may not be wooden. For example, profile metal is better resistant to shocks and impacts and in contact with the ground is more durable than wood, especially concreted. Therefore, for benches common use- street, courtyard - such a performance is preferable, especially since a simple country bench on a steel base will cost less, if only due to the smaller volume of blanks to be delivered to the assembly site.

Bench and stone

A very good garden bench is obtained on a stone base. For example, in pos. 1 fig. flagstone only adds naturalness to the tree and masonry seams do not detract from it at all. The creators of the one in pos. 2, just poured bout in wire baskets, serving at the same time as supports for the tray-table. A bench with flower girls on pos. 3, nothing prevents them from leaning instead of them on mini-rock gardens. If you build a pergola over such a bench, you get a very cozy alcove, pos. 4.

Note: there are also benches with a stone seat, but a suitable slab will be expensive, the stone for it needs quite valuable rocks, very viscous, resistant to fracture and chipping.

To take a rest

In the country, I want to have a good rest, especially after agricultural work. Therefore, it is highly desirable that the dacha bench meet the requirements of industrial ergonomics:

• Seat height 400-500 mm.
• Seat width 500-550 mm.
• Back height 350-500 mm.
• Backrest tilt 74-78 degrees.
• Seat profile (back with seat) is smooth, without a dip under the buttocks.
• In the region of the neck and knees, smooth bends of the profile are made back and down, respectively, so that you can tilt your head and tighten your legs without feeling a sharp rib.

Note: The dimensions of the bench are selected within the recommended limits individually for height and physique.

Drawings of a garden sofa suitable for such conditions are shown in fig. Its design is quite labor- and material-intensive, but technologically not complicated: there are no parts whose configuration would require the use of patterns or templates. Its significant drawback is a large waste of expensive timber, 1.3 m from a 6-meter workpiece, and a 3-meter one is small. Garden bench-sofa on the trail. rice. it is simpler and a thick beam is not needed for it, but 4 parts need to be cut along the grid. Which, however, in the presence of a jigsaw is not scary.

And the kids too

How children love to play on the benches, it is known whether it is a noisy flock with elbows banging, or the whole puppet world of a little housewife. As well as the fact that at the same time they fidget with enthusiasm, crawl, and, not feeling lateral support, slap. There is nothing wrong here, it's a child's business. But there will be less roar and pouting faces if the children's bench is equipped with low railings. However, she does not need a back, so that several slobs can approach both front and back, or sit on a seat astride, legs dangling.

A suitable hybrid of a bench, bench and sofa in this case is shown in fig. It is better to put this building near the nursery playhouse. However, see how it will be more convenient for you, this shop is suitable for adults in size, and it is much easier to make it than the previous one.

By the whole world

A table with benches in the country to each other and ask. On the already equipped, with overgrown trees, the site will have a cozy family recreation area: a table with benches. Scheme with the dimensions of one of the designs of the combined country table with benches in one block is shown in fig. Its design is characterized by ease of assembly and disassembly and the almost complete absence of metal fasteners.

One-piece and several technologically complex connections there are only 4 in this product: T-shaped bench-beams in the section are assembled on dowels or dowels, depending on what you have manual frezer wood or not. But for the winter, the whole complex is easy to disassemble, fold into a compact package and put away in the pantry. Material - weather and pest resistant wood: tar pine, larch, oak. On the base panel you will need plywood 24-30 mm, waterproof or double impregnated with a water-polymer emulsion.

Note: to the lower edges of the base panels, it is desirable to attach square-section wooden bars with glue and self-tapping screws. This will additionally protect the plywood from delamination. Gluing the connection is mandatory, otherwise, due to capillary blocking, the service life of the panels will only decrease.

Combi for two

Fans of philosophical and romantic tête-à-tête in the bosom of nature may like a paired garden bench chair with a back and a table. For a volume of favorite poems, of course. The scheme of its device is shown in fig. on the right, and the drawings and assembly diagram in fig. below. Material everywhere - 30 mm board. This product is already designed for enough experienced craftsmen, because patterns are given only for shaped parts (there is a grid pitch of 10 mm), and other dimensions will have to be restored according to the base grid (see appendix); forming a radius of recesses for the backs in the rear support of 1300 mm.

metal based

A professional pipe 40x40x2.5 with welded ends, thrown directly to the ground in the Moscow region, rusts through and through in more than 15 years. And after that, the remaining box can hold the bench no less. There is no need to talk about strength: even Hollywood superheroes do not cut steel with their hands. True, in the USSR they once bungled a rather stupid movie in which the late Lev Durov pierced a metal tank with his finger. Tin, for drinking water.

So, with the strength and durability of metal benches, everything is OK. Garden benches from a profile pipe can be quite attractive, see fig. But pay attention: a pleasant appearance is achieved by using parts bent along the radius. To achieve the same aesthetic effect with straight pipes, at least twice as much work and material is required, as in the lower right in Fig.

To smoothly bend workpieces, you need a fairly expensive and complex pipe bender for profile pipes. Alternative option- hot bending of a pipe filled with sand. But, firstly, at current prices, he needs a forge with a forge: in order to bend the sides of the bench in the tutorials using a propane burner, at the bottom left in the figure, you need to almost completely burn a 20-liter gas cylinder. Secondly, hot bending is a delicate matter. If you manage to ruin no more than 3 blanks before the part comes out without wrinkles and with the ends in the same plane, you are a born blacksmith.

The next circumstance is that the strength of the metal profile bench is significantly excessive. Therefore, if you do this, the main thing is your own taste and invention. And we give a couple of drawings of benches from a professional pipe 40x40x2.5 for a purely utilitarian purpose. On the left in fig. - a large economic, and on the right - Scott's shop. Why she and what to do with her is well known to fans of bodybuilding and fitness.

Is it just a pipe?

Professional pipes are pulled from ordinary structural steel, and nowhere has anyone said that any other metal will not fit on the bench. For such cases, in Fig. a few examples of metal benches. Pos. 1 - a shop for secluded and little visited places. It makes no sense to steal it: the “fat” is scanty compared to the fuss of robbery and disassembly, and the secondary tree is not yet accepted anywhere. Material - steel strip 4-6 mm thick. Violent fun legs from it will not stand, so this shop is mainly for the cemetery.

Pos. 2 - bench / wicker lounger for sun and air baths. It does not press anywhere, the body breathes from all sides. The base is from an old Soviet clamshell, so a child will rearrange it much more conveniently. load-bearing frame instead of now expensive aluminum, it can be assembled from propylene water pipes.

Complete functionally and aesthetically garden bench on pos. 3 is assembled on the basis of worn parts of agricultural machinery and vehicles. The latter, however, is not necessary: ​​instead of leaf springs, the same steel strip or corner will go.

About transforming benches

Convertible furniture saves a lot usable area. In a city apartment, this dignity is decisive. Unfortunately, it is the only one: transformable furniture is more complicated, more expensive, serves less than its usual functionality and requires additional user operations when transferred to a different use case.

“Transfurniture” came to the garden/cottage, probably only under the influence of fashion. A transforming garden bench is most often either a twin bench or a lounger, laid out with a table with benches, see fig. However, basking in the sun is more pleasant after all on something soft, like the braid described above. And if the transformer is a double bench, then it is a garden bench, not a park one. It is not customary to sit with your back to each other between relatives, friends and acquaintances.

There is one more circumstance: there is many times more dust and climatic influences on the street than at home. therefore, if, say, a transforming apartment table, with careful use, will last 7-10 years, then a garden one will last 3-5 years, especially with wooden hinges.

In general, transformable garden furniture is an amateur business. If you want to practice mechanics with kinematics - your will. But it’s really easier and more sense to think over the layout of the site so that everything you need fits there separately.

Benches indoors

A bench as a piece of furniture is absolutely necessary in a bath: they change clothes on it, douse themselves from a gang, rest, having steamed, drink tea with lime blossom, dried raspberries or blueberries. Very helpful, by the way. But to suffice after something cold or to get strong is a devastating perversion for health.

But for a bench, a bath is not a pleasure, but hard labor: every now and then dampness, the temperature can jump from -30 to +60 in 2-3 hours. Therefore, firstly, a tree for a bath bench is required to be resistant to decay, but without resins, tannins, salicylates, aromatic compounds and other natural chemistry. And it needs to be treated only with biocides from refined mineral oils or based on silicone. Steamed skin is sensitive to substances that are harmless to it under normal conditions, and when sweat is reabsorbed, unwanted “additives” penetrate the body.

Secondly, in a small bathhouse, where the beds do not fit, they steam on the bench. And what is this steam, if it squelches under the stomach? Therefore, a bench in the steam room is made in the form of a lounger with gaps or a lattice of small slats, see fig. But even in this case, a porous tree is required, which easily absorbs moisture and just as easily releases it into the air.

Thirdly, there should be no metal parts in the bath bench that can be accidentally touched. The thermal conductivity of the metal is high, therefore, it gives off heat easily. A piece of wood heated to +80 can be touched fearlessly, and a piece of iron at +60 (which is normal for a bath) will burn.

The best bath benches are made from the Asian Tughrak poplar. Its almost complete replacement is aspen or black alder. Linden and birch are much worse, easily rot. Silvery poplar, sycamore will last longer, horse chestnut or, in the southern regions, ailanthus. All these types of wood in the bath will not slip only if the bench dries well, for which there should be no gaps in the structure that can retain moisture for a long time. And it is desirable to have the entire product easily disassembled for maintenance and, if necessary, replacement of unusable parts.

Brand shops do not meet the latest conditions and the roads, because. made from special varieties of tropical wood. And a home-made bench in the bath is no worse than a “company” can be made at least according to the drawing in fig. With a thickness of 50 mm seat / lounger boards, its length can be increased up to 2 m in order to bathe while lying in full height. Then the width is needed from 60 cm; it is obtained by adding a board and a pair of its heels with legs. The red arrows show the oak leg pads, they greatly increase their resistance to decay.

Not only in the bath

In addition to the bath, the benches, as mentioned at the beginning, are also returning to the living quarters. And not only in studio apartments: in a country house or in the kitchen, a bench will save a lot of space. Do not be surprised, a bench under the wall, equivalent to a pair of chairs in the same place, saves about 0.5 square meters. m area. Is this a small oven? corner fireplace, plus you can sleep on the bench. Of course, the view of the house bench should be more elegant, but it is assembled “in furniture style”, from wood on dowels or from chipboard on confirmations. A technologically simple version of a home bench for two riders is shown in Fig. It is also suitable for urban cuisine, if there is no place for a soft corner.

Note: in fig. on the right - options for making the well-known household mini-bench from cash scraps. Height - on the knees; seat dimensions - according to their own fifth point.

Whatever

antique

Here we will talk about benches from improvised materials. Since the log shop is perhaps its oldest variety, we are looking for logs of a suitable thickness, from 200 mm. Because independent logging is prohibited by law (although it is practiced in some places) and does not benefit nature, we pay attention primarily to dry fallen trees (easier to process) or unusable trees cut down in the garden. Curves, knotty - so much the better; visible roughness gives the log bench only more rustic charm, see fig.

Next, you should turn the log into a bench. Here you can find instructions like: “Precisely (carefully) sawing the log along.” Without a sawmill with a centering and feed mechanism? Advisers of this kind about the processing of wood have a clearly vague concept. In fact, a log bench at home can be made in 2 ways.

The first one gives a large waste of material, therefore it is suitable only if there is an excess of it, but it is available to any amateur, and you can work with an ordinary crosscut saw, even a hand one. For those who don't know: the wood is sawn along the fibers with special longitudinal saws. So, first we make cuts on the log to the desired depth more often, pos. 1 in Fig., and break out the pieces with a crowbar (this is by no means only a thieves' tool), a nail puller or a mount. They jump out of dry deadwood as if by themselves, but on damp timber you will have to sweat over the first ones, and remove the others with a chainsaw, it also cuts along, pos. 2.

Next, first, with an ax and a chisel, we remove the remains of chips, pos. 3, and then we rough-out the surfaces with a plow (planer). The finished product is processed with a grinder, pos. 4, or just hand sanded. In this way, a solid log bench is obtained. Debark the sides or leave it as is, and biocide, stain, and varnish the same as you would for any outdoor wood. Slightly rotted deadwood (with dark spots) will first have to be treated with a wood reducer (clarifier).

For the second method, you only need a chainsaw, because. she cuts both along and across. It requires a sure eye, a steady hand and a strong grip, but the result is a full-fledged bench with a back, as in fig. above, with virtually no waste. Technological process in this case, it is elementary, and the bench is completely ready for gatherings 2-3 hours after starting the saw, see video:

Video: a log bench without nails

Rough but fast and easy

Summer residents-developers, as a rule, do not immediately think about benches. And soon they realize that in vain: on bricks, a box or a random block of wood you can’t rest and don’t really eat. If by this time the first pallet from under the brick has been released, then it will go to the bench, which can be built within an hour, just right.

Pallet benches can also be made in two ways. According to the first, a standard pallet 110x80 cm is sawn into 2 unequal parts, on the left in the figure, which will go to the seat and back. Simple and fast, but on the side struts and legs, on the right there, additional lumber is required, or you need to remove the board from the seat with the back, and an uncomfortable gap forms under what they are sitting on.

The second method requires additional work on disassembling the pallet, see below, but it allows you not to touch the boards prepared for the construction site and the bench comes out more conveniently, because. its back is slanted. The first cut is made across the top, where more boards, sides of the pallet, pos. 1 in fig. The next one is across the lower side (red line in pos. 2), but from the opposite side of the upper side of the middle bosses (shown by the red arrow).

Next, the part with 2 rows of bosses is disassembled, as shown in pos. 3. The bosses of the upper shield are inserted into the openings of the remainder, pos. 4, for which they will have to be moved apart with a crowbar or mount (double-sided arrows in the same place), and fastened with nails or self-tapping screws, as shown in pos. 5. Remains visible in pos. 4, will go on legs, pos. 6.

How to disassemble pallets

The pallets are assembled on nails with sunken caps, and the nails sit very firmly in them, especially those that have rusted in pallets that have been used for a long time. If you disassemble them as usual, then one or several boards will definitely crack. Therefore, the board being taken away is first slightly gently lifted; it is more convenient to do it with an ax, because. it gives a large footprint. Then the same board is put in place and the nails are pulled out by the hats that have appeared with a nail puller or tongs.

Simple and economical

Construction pallets are made of high-quality wood, which can later be used in a variety of ways; at least for the construction of a barn or the construction of a rack. If we already disassemble the pallet, then it is advisable to put less wood on the bench from it. A simple bench, which will require hardly half the boards of the pallet, and the bars will all be left for best use, is shown in fig. on right. Its back is somewhat flatter than ergonomics requires, due to the smaller width of the seat; so this bench is quite comfortable.

A bit about technology

Bolted connections are often used in garden furniture. If it is one-piece and not articulated, it is better to hide the bolt heads with washers and nuts with them. The first for aesthetics, and the second so as not to get scratched.

For a hidden connection of wooden parts with bolts, in addition to a twist drill for wood, you will also need a feather drill, on the left in fig. Use a pen to select holes for the head and nut. After assembly, the rest of the threaded body of the bolt is cut off with a grinder and the connection is tightened again, because. when pruned, it weakens. Then the holes are filled with wood putty; you can thickly knead the sawdust yourself on the Express glue (liquid nails) or PVA for wood. Not on office PVA for paper!

As for the hinged joints, steel clips must be inserted into the bolt holes in both connected parts, their diameter must be taken into account when drilling. Without clips, the bolt will quickly break the tree and the hinge will go floundering at random.

Clips for the bolt can be rolled from tin or galvanized. In this case, twice a year, at the beginning and end of the season, 2-3 drops of engine oil are allowed into them. If it is nevertheless rusty and seized, brake fluid will help out, the same 2-3 drops. The rust from it becomes limp and the hinge "lets go" almost instantly. After the "brake" it is again dripped with oil.

The manufacture of furniture for summer cottages also requires thorn-groove joints, on dowels and dowels (through round wooden bosses). In that case, first, wooden fastener made from the same wood as the parts to be joined. For outdoor use, a certain amount of strength has to be sacrificed in order to ensure that the temperature coefficients of expansion, moisture capacity, swelling and shrinkage of the wood of the entire assembly are the same. Otherwise, the connection will quickly loosen up.

Secondly, it is very, very desirable to make connections for "open sky furniture" with wedging, see fig. on right. The wedges are cut out of hard resistant wood: oak, walnut, boxwood, dogwood. Their thickness is 2-2.5 mm, but not narrower. achievable wood-to-wood connection accuracy plus or minus 1 mm.

An important condition: the wedges must be oriented across the fibers of the attached part, otherwise it may split during landing and subsequently the connection will fall apart. If the parts are connected perpendicular (crosswise), then the wedges in the dowel (nagel) should be oriented at 90 degrees relative to each other. Otherwise, the production of country and garden furniture does not contain anything that would not be subject to ordinary working ingenuity.

Application: how to take dimensions on a grid

Let's look again at the drawing of the paired "romantic-philosophical" bench. How to calculate the missing dimensions? First of all, we visually determine the type of oblique projection; in this case it is an isometry, so both oblique axes are equal.

Then we take a more authentic part, for which the linear size is indicated; in this case, this is a tsarga with a length of 1350. According to the drawing, using the Pythagorean theorem, we determine its length in fractions of the grid step. Correlating it with a known linear size, we obtain a scale factor. If the projection is arbitrary, then it will be necessary to calculate 2 scales for 2 details, for each of the oblique axes.

Then a rather painstaking work begins: the missing dimensions are determined from the drawing in fractions of the grid step and multiplied by the scale. For each pair of parts to be joined, we do a fit check, taking into account that the wood accuracy is 1 mm. If, for example, the spike turned out to be thicker than the groove associated with it, it’s understandable that it won’t fit, you need to look for where the error crept in. If it’s already more than 2 mm, it’s also not good, it will hang out and the error will begin to accumulate in the calculations. And if the spike enters the groove with a gap of 0-2 mm, everything is type-top, they calculated perfectly.

Among the small architectural forms the most common benches and benches. It can be made from any materials or their combinations: wood, metal, stone, concrete, plastic, glass.

They are everywhere: streets and squares of cities, parks and squares, sports and educational institutions, public institutions and residential premises. Practically required element landscape design, plot of a private house or cottage.

The easiest and most affordable material to process is wood. Do-it-yourself wooden benches provide an opportunity to save money, demonstrate home craftsmanship and be a creator.

Wooden benches: economy option

Make wooden benches using existing "blanks". It is enough to process a little, to assemble a strong and functional structure - with a seat, back and legs.

Moreover, such "modules" are inexpensive, sometimes purchased for "penny". It's about about pallets, or pallets.

But not everyone is suitable for garden furniture. Do not use products from non-grade or unedged board. In the first case, large knots can fall out, in the second, “aesthetic” qualities suffer.

There are cases when the step of fastening the board is clearly not suitable for a bench.

A pallet is better, as in the photo. With a corner chamfer removed along the contour.

The width of the pallet is great for bench seating. It must be cut off, the rest can go to the backrest device.

If the width of the back is not enough, then the bench will have to be made from two pallets.

Seats and back are part of the design. Need legs. Let's make pallets from the board itself.

the bench may not be stable -

rigidity is ensured by the seat, and the area for attaching the legs is quite small. Usually, a lower bundle is added so that they do not “disperse”. A simpler option is to use another pallet as a base (more precisely, part of it)

or two. Do-it-yourself benches, benches made of wood in detail and clearly.

Fixing the back, as can be seen from the examples, can be done with a pair of rails, boards, rope or rope. The assembled shop, its surface is cleaned, sanded, varnished or painted.

You can not cut the pallets in width and make a garden sofa.

There are examples of the use of pallet boards for the manufacture of benches and other products from the class of small architectural forms. There are also flowerpots in the photo.

It is not necessary to spend time disassembling pallets, but it is better to buy standard lumber.

Simple bench forms: board and timber

There are designs and execution options - from the simplest to specimens with wood carvings, worthy of being called real works of applied art.

The easiest option for making is a wooden bench without a back.

The drawing shows a do-it-yourself wooden bench, completely made of a board with a thickness of 75 mm.

Each element consists of two parts.

The seat with beveled ends is assembled from two boards. If the shop will stand on open area or outside a heated room, it is better to provide a gap. It will allow water to drain and compensate for the swelling of the tree.

The leg consists of two glued elements. For the reliability of the end connection, a pin (dowel) is inserted. Two short support beams and seat mounts are attached to the leg. The legs and beams are connected with grooves, fixed with glue and self-tapping screws. When assembled, the leg and beam are attached to the seat board with two pairs of self-tapping screws and dowels, holes are pre-drilled under them.

Benches assembly order:

1. Cut out the workpiece;

2. Process the ends and clean the surfaces for gluing;

3. Glue the legs;

4. Beams are attached to them;

5. Gather a shop;

6. Sanded and varnished (or painted).

Images and drawings of a bench from a 30 mm board with a support beam.

There are already figured elements in the form of legs with radius cutouts. You can make it easier to work and make them rectangular. The drawing is not a dogma - it can be taken as a basis and changed in the direction of simplification, and in the direction of complication. They do the same with sizes - they make the shop wider, shorter, etc.

What is the difference between this option and the previous one?

One long support beam is used instead of four short ones, it also performs the function of a stiffener for the base - the legs and the whole structure are more stable. The connection of the legs and the beam goes through a thorn-groove, and it is much easier to cut the thorn out. That is, this form is a little easier to manufacture, more stable and gives more room for experimentation.

Below are several options for a similar design, but in a different design.

For example, in the style of minimalism - there are not even protruding edges. Splicing according to the tenon-groove principle is used to connect the legs and the seat.

In this model, the task was simplified as much as possible - they even refused to cut out grooves and spikes. The connection between the legs and the beam in this case is best done using confirmations, and not self-tapping screws (they have more area contact). For strength, a couple of dowels are usually added on each side, planted on glue. Hidden fastening of the seat is done on a dowel, open - on a self-tapping screw.

If the bench is not very long, then the beam can be placed below. In such a design, it performs exclusively the role of a stiffener.

In the photo below you can see an unusual case of using a dowel - it fastens the beam to the legs not with a hidden installation, but with an open one.

In this bench, a bar was attracted to the "help" board.

Legs with crossbars and two oblique stops for sitting are made of it. All fastenings are made on confirmations, and the connection of the bar of legs to each other is carried out using grooves.

Here, too, a bar is used for the base. Due to the large thickness of the seat board, it does not require additional support. The lower beam serves as a stiffener.

Making a small bench with a back is not much more difficult. The principle of installation and fasteners is similar to simple benches: grooves, spikes, dowels, glue, self-tapping screws and confirmations.

You can take the design with "solid" legs from the board as a basis. Move them a little from the center to the edge so that the ends of the seat and legs are in the same plane. Attach vertical beams to the legs and screw the back to them.

For a model whose base is made of a bar, the back is even easier to make. Two pairs of legs: front - for seat support, rear (high) - for attaching the carrier beam, seat and backrest.

These were light and “mobile” bench and bench designs made of wood, which can be used with equal success in an open area, under a canopy or indoors. There are more massive forms focused on "stationary" placement.

Benches: large format

Making a bench from wood with your own hands for a summer residence involves the use of any form of material. Including those that are used in the construction of wooden houses.

For example, a bar. For reference: a beam is classified as such if the aspect ratio is not more than 1:2, and the smaller side has a size of 100 mm or more. Reducing the size translates such lumber into the category of "bar".

It is not easy to assemble such a shop, as in this photo, with your own hands, but you can.

Assembling the legs is not difficult at all. The only difference from the board and the bar is that you will need more powerful fasteners. For example, such self-tapping bolts for wood.

Under their head, you will have to expand the hole (but the confirmations also require this) and put a washer.

It is much more difficult to install and install the seat.

To “tie” the beam together, three metal studs are needed, with a length almost the width of the seat, and two - the width of the bench, taking into account the legs. It is difficult to find such on sale - you will have to make them from round fittings (stainless steel). The gap between the timber can be maintained with the help of wooden board plates strung on studs. The thickness of the plates should be the same as the three supporting vertical beams that support the seat in the center of the bench.

And this copy is made of even more powerful timber (150 × 100). Its assembly is much easier. Two seat beams are attached from below through short cross beams, which are then mounted to the T-shaped legs.

Another easy-to-execute example using a large-format board. The bearing capacity of the material is such that it does not require the use of reinforcing beams - the seat is attached to the ends of the short legs. The author of the project knows well that the most rigid geometric figure is a triangle. Therefore, both the configuration of the lower part of the supports and their connection to each other by bolts has the shape of an equilateral triangle.

If it is possible to order two non-standard wooden beams, then making such a bench with your own hands will not be difficult: you will need to “add” four short beams (100 × 100) for the legs and two bars (100 × 50) for the back.

But if there is no such possibility, then instead of a non-standard beam, you can use a pair of standard ones.

Such a garden bench made of wood with its own hands already uses logs.

The most difficult thing in this option is to make a longitudinal groove and a spike for connecting logs with an ax (or adze). For reliable fixation, you will need another pair of dowels on each side (this is the same dowel, but only thicker and longer). The seat and back can be made of board (as in the photo) or timber. Do-it-yourself benches, benches made of wood - ideas and solutions.

And this version of the bench is already more complicated.

But not much. The main difficulty is to make a back, or rather a notch on it. All fastenings of the parts of the structure to each other pass through dowels.

In principle, such wooden fasteners are strong enough - log cabins with a couple of floors (including wooden churches) were previously built without a single nail.

And a very simple option: two decks with a groove and half a log, sawn lengthwise.

Wooden bench

In conclusion, a couple of examples of how you can make a bench out of wood, but not purchased, but found in the nearest planting or forest. Benches, benches made of wood with their own hands from auxiliary material.

In this example, only the seat is made of plank, everything else is made of natural material, which had to be selected in thickness and adjusted in size.

To make the seat of such a shop, you need professional tool, so you will either have to order longitudinal sawing of the log, or (which is easier) take an unedged board as a blank.

Note information : , .

• Video

Video

At the cottage, we take a break from everyday worries, merge with nature, contemplate, relax. In anticipation of the upcoming holiday season site offers a selection of ideas wooden benches, which you can do with your own hands, or order from the masters.

It will be enough just to print the bench you like and show it to the specialist. This is quite enough, since a person who knows his business, even from a sketch, is able to understand what is required of him. So, let's see what is now in the assortment of country decorators ...

Solid classic wooden bench with a back. The photo clearly shows the design, which boards were used for work. How nodes are attached.

A simple do-it-yourself shop

A simple bench made of boards and a metal base. This is probably one of the most simple designs. Such a wooden bench can be made with your own hands in just one hour.

Do-it-yourself bench from boards

Modern bench made of boards with their own hands. Pay attention to docking "in a spike". From the inside, the bench should be additionally fastened into a corner with a beam planted on glue and self-tapping screws so that the structure does not “walk”.

Wooden bench from boards

Another idea for such a connection. Only here the shortcomings of the previous version are already taken into account. This bench is extremely stable and reliable. The legs are made from a board 100x50 mm, with jumpers 100x25 mm, the seat of the bench is made from a board 100x50 mm.

Do-it-yourself wooden bench chaise longue

Wooden bench chaise longue. If you make a more gentle slope, then you can rest reclining. The design of the bench is made of thick plywood, sawn with a jigsaw. For stability, three vertical racks are made.

DIY bench around a tree trunk

Bench around a tree trunk. Do it with a margin, as the trunk will become thicker over time.

DIY bench with pallet armrests

Bench with pallet armrests. After construction, a fair amount of this material remains, so it can be put to work.

Set of table and benches made of iron frame

Set of table and benches made of iron frame. If you own welding, then by purchasing a metal channel, you can easily make a reliable set for outdoor gatherings with your own hands.

A simple bench made of saw cuts of wood and boards

A simple do-it-yourself bench made from wood cuts and boards. For one summer season, or to receive a large number of guests. Such shops are common in villages, often, when driving through the village, you can see such structures near houses.

Small wooden garden bench

Small wooden garden bench. On such a bench, you can weed the beds or practice in the flower garden, near the flower bed.

Bench from a cut of a dense tree. This is already a work of art - such masterpieces are worth big money. I met such exotic benches in Asian countries - they are at a premium there.

Bench with drawer tray for things or toys. It will require a certain skill from you during the construction, but it will serve, among other things, also as a repository.

Decorative bench made of slats - very airy and light.

Rural bench made of halves of logs. It will look good in the bosom of nature! If you have a forest near your dacha, then you can easily find dry logs, splitting which you can make yourself an exclusive garden bench.

Swing from crooked trunks. Very decorative and stylish!

Bench decorated with a wagon wheel. The design is complex, I give it just for beauty.

Bench made of thick boards with a figurine of an animal. If you set up such a bench in front of the house, from the side of the street, then for sure there will be those who want to take a picture while sitting on it.

A variant of dies and crooked tree trunks. Bench for lovers of natural forms.

A bench made of halves of a log, taken in one of the city parks.

Bench - pergola. Lianas are skillfully inscribed in the design of the structure.

Bench from a slanting saw cut of a tree. I understand that it is unlikely that it will be possible to make such a cut on my own, without the use of expensive equipment, but the idea is very original.

Bamboo bench with hanging seat made of thin planks tied with strong rope.

A do-it-yourself bench made of boards and timber is also a very easy design.

Family bench with a table for a large family.

Do-it-yourself massive wooden benches

Massive benches and a wooden table. The boards are processed in such a way that they look as if they were doused with water in the sea.

Classic bench sofa.

Rustic furniture is very popular with Western homeowners. The most difficult thing in such things is the collection of branches that are suitable for the curvature.

A simple bench made from half a log. The legs are realized in the form of bast shoes.

Collect the cut trunks of your trees and branches and create decorative furniture from them. For a couple of seasons of filing fruit trees you can accumulate material on a bench or bench.

An example of a rocking sofa. A good option for summer holidays in the country.

An interesting "double" version of the bench - chair.

Bench with pedestals and flowerpots on them.

Round wooden bench around a tree. The elements of the seat are made of thick plywood, which made it possible to make a bench of a rounded shape.

Do-it-yourself fun bench from a board and logs

Cheerful bench from a board and blocks of wood. Very simple idea, the main thing is to paint everything brighter and write something original.

A very rich bench - a swing ... It remains only to lick your lips!

Like these ones original ideas wooden benches and benches with their own hands. This, of course, is not all! There are a lot of ideas around, the main thing is to capture the beauty in the photo, and then embody it on your site!