• Repair
• Repair
• Interior Design
• About everything
• About plumbing

What can be done from wood with your own hands. We create a simple and amazing decor from wood with our own hands What and how to make from wood

decorative trees from artificial materials It is ideal for decorating your home or office. They will perfectly fit into the design of any interior, creating cozy atmosphere in room. Such hand-made crafts do not require special conditions of maintenance and careful care compared to living plants. From this article you will learn how to make artificial trees with your own hands in different ways.

artificial pistachio tree

You will need:

• Gypsum;
• Pot;
• Pistachio shell;
• Spray paint gold;
• Wire.

How to make a tree with your own hands from pistachio shells:

• Using a drill, make a small hole in each shell;
• We cut the wire into segments 15-20 cm long and fix one shell for each of the segments. Next, we twist the wires and get blanks;

• We connect several leaves together by twisting the wire. Thus, a branch is obtained;
• We make several branches and twist them together - we get the trunk of a tree;

• We wrap the branches and the stem part with FUM tape. Instead, you can take a thread or rope;
• Let's paint the craft;

• Let's prepare the base: we will prepare a pot suitable for crafts, which we will fill with plaster and insert our “golden” masterpiece into it;
• Let's wait until the plaster dries. We paint the pot with paint;

• Additionally, we make out the finished craft with coins.

Similar ideas for hand-made crafts can be found in the article.

Master class on making decorative poplar

Such a beautiful "poplar" is a great decoration for a house or street.

Required materials:

• Candle;
• Glue;
• Needle;
• Matches;
• Thin and thick wire;
• Pot;
• Gypsum or cement;
• Gray and green threads;
• Green plastic bottle;
• Scissors.

Step by step master class with photo:

• We separate with wire cutters from a thick wire 3 segments that are identical to each other, connect to each other by twisting. We wrap the ends of the blanks on one side;
• We dilute the fixing mixture, pour the solution into the pot, put the “poplar” trunk with curved ends there. We are waiting for the mass to solidify, and at this time we are making artificial branches;
• Cut into squares from a bottle different size, cut out leaves from them. We heat a needle over the flame, make holes in the upper part;

• We insert into them thin wire, fold in half, twist. We combine three branches into one and make several identical blanks;
• Next to making crafts for home interior we take several blanks, which consist of three branches, and connect them together;

• We close the wire part with the help of gray threads, fix the ends with glue. We leave the lower part of the branch free, which we attach to the trunk;
• Using the same method, we make the entire “poplar”, we wrap its stem part with a gray thread;
• To imitate grass, cut green threads of the same size, fold them in half. Lubricate the bending points with glue, fasten the blanks to a cement or gypsum base.

Thus, we get beautiful artificial trees in pots that can safely stand both at home and on the street - they are not afraid of rain and bright sunlight.

artificial home apple tree

It is advisable to place such decorative artificial trees only indoors, because their flowers are made of yarn.

You will need:

• Glue;
• wire cutters;
• Cardboard;
• Hook;
• Scotch;
• Wire;
• Pencil;
• cement or plaster;
• Scissors;
• Brown and green fabric;
• Pot;
• Red and brown threads.

Stages of work:

• We cut off with wire cutters six wire blanks of 30 cm each, five - 25 cm each, and twenty-two - 4 cm each;
• We attach with tape to a large wire branch 3 small ones. Let's make some preparations. Branches can be wrapped with matter, for example, velvet or fleece;

• We cut strips 2 cm wide from brown fabric. We wrap them with blanks of branches (several pieces), leaving 3 cm free at the bottom. We fix the ends of the matter with glue;
• We collect the blanks into a single "apple tree". We cut off a strip of 3 cm from the fabric, wrap it around the canvas and the branches connected to each other. We also fix the fabric ends with glue;

• To make a decorative apple tree further, we install it in a container with a narrow neck. If such dishes could not be found, then in order to fix the “plant”, we pour cement or gypsum mortar. We straighten the branches and begin to decorate our craft;
• Now we will cut leaves of different sizes from green matter, and singe their edges over the flame, not bringing them very close to it so that they do not spread;

• We glue the leaves on the branches and begin to create fruits that are made from. Cut out 2 circles from cardboard, 3 cm in diameter. We draw a smaller circle inside and cut it out, we get 2 cardboard rings;
• We connect them into a single part, we wind a red thread on it with a hook. The yarn should completely “hide” the workpiece. We cut it from the outer edge, lay the thread Brown and with its help we tighten the resulting pompom;

• Cut out leaves from green material, glue on a brown thread;
• We hang ready-made "fruits" on the branches. You can also decorate the pot as you wish.

Volumetric tree on the wall

This unique 3D decoration can be made by hand on the wall (and even on part of the ceiling) without any problems. To get a real masterpiece, it is not necessary to have the knowledge of a sculptor or artist.

Important: This decor requires a lot of space.

You will need:

• Master OK;
• Bucket;
• Marker and scissors;
• Acrylic paints and brushes;
• Scotch;
• A bag of dry gypsum;
• Large sheet of cellophane film.

Progress:

• Let's draw a contour mirror image on a cellophane film with a marker, and when we cut out the traced middle, we should get a stencil;
• We stick it on the wall with adhesive tape;
• Pour water into a bucket and dilute gypsum;
• Carefully fill in the empty stencil space with the help of a trowel;
• Remove the film after the mixture has dried;
• We apply a few more gypsum layers, the last one is rounded;
• When the solution dries well, paint the sculptural image with acrylic-based paints.

You can choose from a variety of palettes. In the living room, a “natural” image will look great, in a children's room on the wall - a fabulous tree, unusually painted.

decorative tree from branches

To decorate the interior of your home, you can make large artificial trees with flowers.

Necessary materials:

• Glue hot gun;
• Twigs;
• Sea pebbles;
• Square flowerpot;
• Decorative flowers (you can - paper);
• A piece of foam.

How to do decorative tree independently from the usual branches:

• We fill the bottom of the flowerpot with sea pebbles and put foam plastic on them, and insert the prepared branch into it;
• We sprinkle it again with sea stones for good stability, insert moss on top;
• Now we decorate the branch. To do this, decorative flowers using glue gun glue randomly to a branch;
• After the end of this procedure, such a decorative craft will rightfully serve as a decoration for your house or apartment.

On the Internet, you can find many photos of trees made by yourself, choose the option that suits you and create your own masterpiece based on it. One more interesting idea to create faux wood look at the video below.

Video: How to make a do-it-yourself LED tree

Things made by hand are distinguished by their beauty and decorativeness. They add a piece of warmth and comfort to the interior space. Wooden crafts for home and garden have an aesthetic appearance and allow you to reveal your inner potential. They help to decorate the residential interior and add a kind of zest to the backyard.

Both adults and children can make such products. Modern drawings wood crafts will help to cope with the task. A good imagination and a little patience allow you to get the desired result.

Original wood decor ideas

Since ancient times natural array wood has been widely used as finishing material. The beautiful texture and unusual coloring amaze the human imagination. From wood, luxurious furniture and decor items are obtained.

For creating unusual crafts. you cannot do without plywood, plywood, on the site https://faneramonolit.ru/katalog-fanery/fanera-1520-h-1520/ you can choose the size and place an order.

DIY wood crafts add a piece of warmth and conciseness to the environment. For example, beautiful photo a frame with carved patterns will be a wonderful decoration in the reception area for guests and loved ones. To do this, you can use different types of tree crops. Special stains and impregnations will help to add colors and emphasize the texture.

For a suburban area original solution there will be animal figures. This will require flat wooden elements. For example, thin saw cuts are used to create an owl.

The design consists of five main parts: head, torso and eyes, tail wings. The head and body are made from round cuts. For wings you will need bark or vine, previously fixed to each other.

Crafts from saw cuts of a tree will become a real decoration of a personal plot. Thin parts of wood are used for the manufacture of many tiered racks and shelves, which will later be located flower arrangements. The surface of the array can be processed with sandpaper or left in its original form.

Wooden saw cuts are widely used as a basis on which various decorative trifles are subsequently located. For example, crafts in the form of a picture. In the foreground there will be flat pebbles. They will help to imitate the torso and head of little men.

From gift paper, you can make beautiful clothes. Other small items draw with a thin marker.

Natural landscapes are made using the same technique. Marble or granite chips will help add luxury. For these purposes, you can use small amber. It will help to fix the result paintwork. The photo of wood crafts shows exclusive decoration options. They add sophistication to the environment.

Master class on creating a three-dimensional wooden appliqué

Wooden appliqué impresses with its beauty. Modern technologies allow you to create a complex pattern made of thin wood. We bring to your attention a detailed master class on creating an application from a natural array.

Before starting the workflow, you need to prepare the following tools and materials:

• thin wood;
• simple pencil;
• image based on which we will create an application;
• paper;
• thin plywood;
• glue for wood;
• impregnation. It will be needed to give color to future crafts.

The workflow is divided into several stages:

• On a piece of paper we draw a future sketch. The weight of the part is signed and numbered.
• Next, we cut the whole drawing into separate parts;
• Cut sharp corners carefully.
• We grind every detail with sandpaper.
• After the surface is prepared, each element of the application begins to tint. To do this, you need a thin brush and a water-based stain.
• When all the details have dried, you can start making a wooden panel.
• Each element is covered with glue.
• After that, we fix them on a sheet of plywood.
• When all the elements are in place, leave our panel to dry completely.
• You can give a clear outline with a thin marker.

As you can see create beautiful thing simple enough. The main thing in this matter will show a little imagination and perseverance.

Even more instructions on how to make crafts can be found on the site of our friends.

Photo of wood crafts

If you want to diversify your leisure somehow, then we advise you, dear friends, to do carpentry. This exciting activity will drag you so much that time will simply slip away unnoticed, and in that case you will learn how to make all kinds of decorations for your home, summer house, garden and, of course, the yard with your own hands. In addition to all this, you will not be tormented by the age-old question of what to give relatives, friends and work colleagues for their name day and other holidays. Moreover, at least a dime a dozen improvised materials for creativity, at your disposal are all the old trees that are on your personal plot.

Even from nondescript stumps and snags, when you turn on your own imagination, you can create incredible masterpieces of art that will be admired by everyone without exception. So, we strongly recommend that you visit our article, which will provide you with 10 photos of beautiful and interesting DIY wood craft ideas for prepared beginners. They will serve you a prime example and impetus for their own extraordinarily cool work. Videos from step by step wizard classes will complement and consolidate your acquired knowledge in the field of carpentry.

Original log feeder

If your child is 11-12 years old in a labor lesson, they asked homework at school or kindergarten, make a bird feeder, then you should like this wooden craft. You will not spend a lot of time on its manufacture, and the result will please you and surprise others. Let's look at step-by-step instructions and understand how to make an interesting log feeder with your own hands.

You will need:

• Log,
• Chainsaw,
• jigsaw,
• chisel semicircular,
• Hammer,
• Chain - 1 m,
• Carbine,
• Mounting loop - 2 pcs.,
• Self-tapping screws.

Progress:

1. Even a novice carpenter, through our master class, will be able to build a simple and original log feeder with his own hands. From the log we saw off two circles on both sides, of small thickness with a chainsaw.
2. We cut a wedge along the length of the log at approximately 45 degrees.
3. We take out the wedge from the log.
4. We make longitudinal and transverse cuts inside the log, without cutting about 5 centimeters to the contour.
5. With the help of a chisel and a hammer, we hollow out the middle of our log. Align the chips by doing inner part log is smooth.
6. From 2 sawn circles we cut out the side plugs. To do this, we apply a circle to the log and outline the size of the plug along the inner contour, and cut it out with a jigsaw.
7. We insert the plugs along the edges of our feeder and fasten with self-tapping screws.
8. Our craft in the form of a feeder is ready, now we will make fasteners for it.
9. To do this, we screw the mounting loops on the sides into the upper part. We put a chain on them.
10. It remains to attach a carabiner to the chain and hang it on a tree.

Video: interesting do-it-yourself bird feeder

Frame made of tree branches

Photography is a surviving piece of happiness captured in different periods life. Having made an unusual wooden photo frame with your own hands, you will bring zest to the interior and surprise your guests. This frame will be especially relevant for a gift to loved ones. Even a novice carpenter can easily and quickly cope with such a simple task. The result is an amazing craft for the joy of everyone!

You will need:

• Branches of various thicknesses,
• Frame,
• glue gun,
• Electric jigsaw.

Progress:

1. Saw the branches into wheels, about 5 mm thick. The more varied the thickness of the branches, the more interesting the finished frame will look.
2. Now glue the frame with the resulting rings using glue, placing them in a chaotic manner.
3. The edges may be uneven, but this will add a special charm to your handmade wood craft.

swedish candle

Such a candle will be indispensable in any campaign. You can cook food or heat water on it, it burns for a very long time. This useful craft, made by hand, will save you on any hike, travel, fishing, and even in the country. It's insanely easy to make. Let's see step by step description and the principle of its implementation.

You will need:

• piece of log,
• Chainsaw,
• Ignition fluid.

Progress:

1. In order to make this interesting do-it-yourself wood craft for beginners at home, you will need to make 4 chainsaws intersecting in the center of the cut along the log. We do not make cuts to the end so that the structure does not fall apart, but a little more than half the length.
2. Now pour the ignition fluid into the middle.
3. When you find yourself on a hike, just set fire to the log in the center. The flame will be strong.
4. In order for oxygen to flow to the place of ignition, take 2 branches, preferably raw, and lay them parallel to each other. Now you can put dishes with food or water on them.

Video: master class on making swedish candle do it yourself

Owl made of wood

To decorate the garden or as an interesting craft for school, an owl made of wood will look good. It is done quite simply with your own hands, so with your help even a novice carpenter - a schoolboy can easily cope with such an owl. Before starting, let's see how to make an owl with your own hands in step-by-step instructions.

You will need:

• Round saw cuts from wood different diameter(1 large, 2 small and 1 medium),
• Saw,
• self-tapping screws,
• Plastic bottle cap - 2 pcs.,
• felt-tip pen,
• Sackcloth,
• Scissors,
• Glue.

Progress:

1. A large saw cut will serve as the body of an owl.
2. On the flat side on top we fasten two small saw cuts with self-tapping screws. These will be the eyes.
3. We cut a medium-sized piece in half and fasten it on the sides of a large cut. Sawn sides in different directions.
4. Make a beak with your own hands from a small piece of log, cut it out. Place from below between the eyes, attaching with a self-tapping screw.
5. We need to make ears out of burlap, placing them above the eyes. Take a small piece, roll it into a tube, making one tip sharp. Flatten and glue over one eye with the sharp part to the side with glue. We do the second eye in the same way.
6. We make eyes from caps. We attach covers to the logs for the eyes with a self-tapping screw, and paint over the pupils with a black felt-tip pen.
7. The owl is ready. It can be hung on the wall, as it has a flat side, or fixed on a tree branch in the garden, decorating it with another interesting DIY craft.

This interesting wooden stool will be an excellent decoration for a summer cottage, bathhouse or garden. You will not spend a lot of effort and energy on making it yourself. Such a stool is distinguished by originality in manufacturing, since by and large it turns out by itself. You will need several actions at the beginning and at the end of the work. For novice masters - this is just great way hone your skills.

You will need:

• Log,
• lighter fluid,
• Saw,
• Round seat blank
• metal brush,
• grinder,
• Nails,
• Hammer.

Progress:

1. We take a log and make 2 cuts, perpendicular to each other, along the log.
2. Pour ignition fluid into the middle and set it on fire.
3. We wait until the fire itself makes legs for the stool and extinguish it.
4. Using a metal brush, remove the remains of coal and burning.
5. Then sand the surface of the stool with your own hands.
6. Attach the seat to the top of the stool with nails.
7. The stool is ready! A great and useful craft made of wood for the whole family.

Video: do-it-yourself stool making master class

Do-it-yourself swing for a child

If you want to please your child with a swing, it is not necessary to buy them. You can make very beautiful and safe swings for small children from wooden planks with your own hands. They are safe because on all sides there is protection against falling out in the form of crossbars. So, let's start the process of doing our homemade interesting crafts at home.

You will need:

• Bar 3 × 4 × 37 cm - 11 pieces,
• Board 4.5 × 1.5 × 37 cm,
• self-tapping screws,
• Rope,
• Hacksaw,
• Pencil,
• Ruler,
• Drill,
• Screwdriver.

Progress:

1. To make our wood wonderful craft, put two bars parallel to each other. Lay 6 boards on top the same distance between them and fasten them with screws.
2. Drilling holes for attaching the rope with four sides at the corners.
3. Next, take a hacksaw and cut off two pieces of 15 centimeters from the bar.
4. Then we drill holes in the center of the resulting blocks, so we get the front pillars of our homemade crafts.
5. We cut the seven-centimeter cut in half and drill it vertically.
6. We take a new bar and put small bars with holes along the edges. We drill holes in the bar.
7. We repeat the same action with two more bars and three planks.
8. At the new bar, we cut off two bars, 7.5 cm long, and drill vertical holes in them.
9. We take the rope and begin to assemble our swing. We pass two different ends along the sides of the seat so that the middle of the rope is under it. So we do the swing on both sides.
10. We put 15 cm racks on the rope on the front of the swing.
11. Racks of 3.5 cm are put on the back ropes. Then we put a bar with holes on the rear racks, so we will do it ourselves back wall our swing.
12. We put bars on the rear racks, 7.5 cm long.
13. Install armrests. We put planks on the side ropes.
14. We put on the two remaining drilled bars on the back ropes.
15. We put on a board on the front ropes, which will serve as a side for the child.
16. Now you can hang the swing in any doorway or in the hallway.

Video: an interesting do-it-yourself wood craft

Wooden cutting board

Each of us in the kitchen uses cutting boards, so I want to talk about how to make a board with your own hands for beginners. Such an interesting craft can be used in your kitchen, presented to friends and relatives, or used as a basis for wood burning or other works.

You will need:

• Board 20 × 70 × 40 mm,
• Glue,
• Clamp - 2 pcs.,
• Plane,
• jigsaw,
• Drill with drill,
• Sandpaper,
• Creosote.

Progress:

1. In order for the craft to turn out the way it is required, the boards need to be glued together so that one wide board is obtained. To do this, we smear the sides of the boards with glue and, using two clamps, tightly tighten them together.
2. After the glue dries, remove the clamps and work the board with a planer so that it becomes smooth and even.
3. Now draw the desired shape of the board and cut it out with a jigsaw.
4. Drill a hole in the top of the board so that our craft can be hung in the future.
5. We process all sides of our board with sandpaper so that it becomes perfectly smooth and without burrs.
6. After sanding, treat your board with creosote. Wait for it to dry.
7. Board made for short term time with your own hands made of wood, ready to use!

Tic-tac-toe game made of wood

From wood, you can create not only decorative and useful crafts, but you can also make a game of tic-tac-toe with your own hands. Such interesting job will please both adults and children with their unusual design. This game can take time at home and in the country.

You will need:

• Sawn circle, diameter 20 - 25 cm,
• Branch, 3 cm in diameter,
• Cautery on wood,
• Hacksaw,
• Sandpaper.

Progress:

1. In order to make an interesting do-it-yourself wooden craft for beginners without any problems, you first need to cut the branch into circles, up to 1 cm thick. We need 12 of these blanks.
2. With sandpaper, process all sides of the circles, as well as our playing field.
3. Now burn the field for the game, 3 × 3 cells in size, on a large circle.
4. On small circles, we need to burn 6 zeros and 6 crosses.
5. The craft is ready to play!

snowman made of wood

Such an interesting and cute children's craft will become a real decoration of the room interior on New Year 2018 or as a gift for school friends. Children can easily make such a creation with their own hands, only you need to devote a little time and effort to creativity, as well as prepare a few cuts of a tree. Parental help and support, of course, will also be useful for beginners. So, let's get to work.

To create you will need:

• a piece of wood, 5 X 10 cm in size;
• sandpaper;
• white acrylic paint;
• materials for decorating the Snowman: buttons, fabric and anything else you like;
• drill;
• black marker;
• pink paints;
• paper;
• compass;
• orange polymer clay;
• brush and sponge for applying paints.

Work process:

1. To make this craft, you will need to distinguish between work for children and adults. To begin with, a child of 11-12 years old will be able to freely draw a Snowman template on a piece of paper, and then cut it out with adults.
2. Dad or grandfather, in turn, transfers these sketches to the tree, circling the lines with a black marker.
3. Carpentry tool will need to cut fairy tale hero, and then grind all the bumps and roughness.
4. After that, you need to bring the Snowman closer to natural color. To do this, you need white acrylic paint. We cover the entire product with it and take time to dry.
5. We create cheeks with pink paint. With an elementary touch of a finger, we apply a blush to our craft.
6. Draw the eyes and mouth with a black marker.
7. Nose - we make carrots with our own hands from polymer clay. Give this part of the work to your child. After drying, attach it to the product universal glue. In the same way, attach the buttons to the body of the Snowman.
8. We make pens from tree branches, a hat from colored gray or brown cardboard, and a scarf from any piece of fabric. So our fun New Year's craft is ready, created with your own hands quickly and easily. For schoolchildren, you can come up with many similar products that they will create on their own at home. Perhaps this creativity will develop into a real hobby of your child, and later into something more serious.

Wooden flower vase

Another one creative work for beginner carpenters, which will be subject to schoolchildren 11-12 years old, this is a vase made of wooden cuts and a metal can. You can give this handmade craft to your mother, grandmother or girlfriend. Take a close look at the photo and start making this interesting product.

For work you will need:

• metal can;
• universal glue;
• small cuts of wood.

Manufacturing process:

1. Adults need to prepare small wooden saw cuts in advance.
2. Clean the metal jar from dust and dirt.
3. In a chaotic manner, we glue saw cuts made of wood onto a prepared container, starting from the bottom to the top. Slots should not be in principle. They need to be masked with small circles. natural material. That's all! Our interesting craft can become a gift, and very valuable, because it is made by hand.

Finally

So our article has come to an end, which has provided you with some of the simplest and also interesting crafts from wood with their own hands for beginner carpentry masters. The photo ideas and videos offered by us are quite diverse and colorful, informative and meaningful. This material is quite enough for beginners who want to open up in the field of this carved art. Take some time for this information, study and apply your knowledge in practice at home to create best work for beauty and benefit. By the way, if your children are also not indifferent to this type of needlework, then feel free to introduce them to your creative company. Together, as they say, work is more fun. For kids, you can find some simple crafts that they can create lightly with their own hands. Fantasy, make your dreams come true, decorate everything around with your creations, please yourself and your loved ones.

After carrying out garden care work, as a rule, a summer resident has a lot of waste at his disposal: from thin twigs to massive logs. They can be used for firewood, but it is much better to make garden crafts made of wood with their own hands, which will decorate your site and attract everyone's attention.

Landscape Design Elements

garden buildings

Wood can serve as a material for construction and decoration various structures: barn, well, gazebo, barbecue and so on. Such wooden crafts for the garden with their own hands look especially attractive against the background. country house from logs or planed timber, forming a single style of landscape design of the site.

It should be remembered here that the construction of even a very small structure will require a sufficiently large amount of wood. Therefore, you need to be prepared for the fact that the missing amount of lumber will have to be bought in addition. However, the result is worth it.

Organically combining rounded logs and branches obtained after pruning trees in the garden, you can create unique and inimitable exteriors.

garden path

Make your country cottage area Paths paved with saw cuts of trees will help beautiful and unusual. For this, pruning of thick branches and sawn tree trunks that remain after cleaning in the garden are perfect. You just need to make sure that they are not spoiled by pests, as this affects the strength and durability of the coating.

The work is done like this:

• the tree must be sawn into segments of the same length (diameter does not matter here);
• process blanks special composition protecting them from decay;
• according to the pre-made markings, dig a trench, the depth of which is equal to the length of the prepared cylinders plus 15-20 cm;
• pour into the bottom of the hole sand cushion, which then carefully tamp;
• only after that you can install saw cuts.

The gaps between large elements can be filled with thin blanks that you have sawn from tree branches.

After work is completed, the remaining gaps are covered with sand or earth. The latter can be mixed with seeds, after the germination of which the path will become even more attractive. appearance.

Fences and supporting walls

Wood is perfect for the construction of various fences. In addition to the main purpose - zoning a site or restricting access to people and animals - a wooden picket fence or wattle fence also performs a decorative function, complementing or emphasizing various design solutions in landscape design. Such a fence can be easily made from improvised materials without spending money on their purchase.

Zoning of the site can be carried out using supporting walls made from dry tree branches or logs of suitable thickness. This solution will be effectively combined with a log house, log paths, wooden garden furniture and so on. It is only important not to overdo it and keep a sense of proportion.

Decorative bridges

The ensemble of wood crafts can be completed by bridges made of logs and branches thrown over streams or artificial reservoirs. They look very colorful and are often used by designers to decorate the landscapes of summer cottages.

They have one drawback - the need to use a large amount of material. It is unlikely that you will find a sufficient number of logs and thick branches in your country house. However, in this case, the nearest forest can help out. Surely there is a sufficient amount of dead wood that can be used to good use.

Note!
Before cutting down trees in the forest, you need to make sure that by these actions you do not violate the current regulations concerning the use of natural resources.

Decor elements

flower bed

After sawing down an old or withered tree, a massive trunk remains at your disposal, which is most often sawn into firewood and burned in a fireplace or bath. However, with a little imagination, you can turn it into a unique and attractive club that will decorate the yard, barbecue area or outdoor summer kitchen.

For its manufacture you will need:

• trunk of an old tree;
• chisel and hammer;
• chainsaw;
• planer or grinder.

You won't need a how-to guide. You just need to arm yourself with patience and imagination, and then give an unsightly piece of wood any desired shape. Also, do not forget about the recess, which subsequently needs to be filled with soil and plant flowers there.

Advice!
When choosing plants, make sure that they are combined with each other in shape, color and flowering time.
So you will achieve best effect and get rid of the dead wood in the flower bed.

garden furniture

Do-it-yourself garden crafts made of wood, which act as furniture, have recently become widespread. The price of such products made by professional craftsmen is quite high, but you can make a simple chair, table or armchair yourself.

It is only necessary to take into account the following nuances:

1. For the manufacture of furniture, it is necessary to use wood with a thick section, which is difficult to find in a summer cottage.
2. In the manufacturing process are used professional tools and equipment. If you do not have them, you can rent the necessary power tool at the nearest building supermarket.

Wood processing and furniture manufacturing is carried out in the following sequence:

• a log or branches of suitable thickness and length are processed with an ax to remove the remnants of bark and knots;
• with the help of a chainsaw, objects are given the final shape and size;
• after fastening the parts to each other, they are finally finished with a hammer and a chisel;
• at the very end, all surfaces should be cleaned with sandpaper, achieving perfect smoothness.

Advice!
In order for the resulting garden furniture to serve for a long time, it must be treated with an antiseptic, getting rid of pests inside the wood, and varnished to protect products from the effects of negative external factors(sun, water, etc.).

Decoration of the playground

The wood can be used to make various figurines that decorate playgrounds. They will serve not only as a design element, but also as a game item. For example, a wooden horse. Its production will not require much effort from you.

The work is done in the following sequence:

1. The body is built first. To do this, you need to take two saw cut logs of large diameter and connect them using small planks. The thickness of the cut should be about 3-4 centimeters, and the diameter should be at least 25 centimeters. Thus, a box is formed, which, if desired, can later be filled with earth in which to plant flowers.

1. The next step is to make the legs. In order for the horse not to fall during the games, they must be strong and hold the body steadily. Suitable wooden beam with a cross section of at least 5-6 cm or branches of trees of a similar diameter. It is advisable to select the length based on the height of the children.
   Remember that the legs must be firmly attached to the body and planted in the ground. You can use metal corners for rigidity, and bury the lower ends of the bars in the ground.
2. The final stage - decorative details. This includes the head, mane and tail. The last one is the easiest to do. You just need to fasten a few pieces of rope. The head is made of plywood, which is shaped with a jigsaw. You can attach the head to the body with a wooden block 30-40 cm long.
3. Don't forget to color the figure. This will not only give it an attractive appearance, but also protect the wood from negative impact sun, rain and snow. Remember to use wood varnish or paint that is safe for children and does not release harmful substances into the atmosphere.
   Another way to make a horse out of wood is to use trimmings of branches and logs left after cleaning the garden. But in this case, it is necessary to show remarkable imagination by constructing some kind of sculpture out of them.

You can also make children's swings and a sandbox out of wood. With a little imagination, you can design climbing stairs, mazes and many other items that the younger generation loves so much.

Note!
All items installed on the playground must be safe.
Make sure that the base of the swings and stairs is carefully concreted, all parts are securely connected to each other, and there are no nails, splinters, knots and various defects on the surface of the wood that can injure the baby.

By the way, the old logs at your disposal can be successfully used to make cars, trains, and so on. All you need is a chainsaw and some paint. And the delight that will be reflected on the faces of your offspring will serve you as the best reward.

Conclusion

It is hardly possible to give an exhaustive list of garden crafts that can be made from wood. Having shown imagination, you can come up with many more ideas, each of which is worthy of implementation. After reviewing the video in this article, you will learn a lot of interesting things for yourself.