What is better drywall plywood wall. Which drywall is better for walls: choose the material for sheathing. Overview of structural finishing materials

1 140 rubles

600 rub

1 650 rub

990 rub

1 800 rub

200 rub

120 rub

245 rub

1 000 rub

6 000 rub

350 rub

2 000 rub 2 200 rub

These are the most popular materials used in modern construction. They are practical in use, the ability to carry out different kinds finishes, while the materials are available even for budget construction or repair. However, there are differences that need to be noted. Consider the main pros and cons of building materials, the main areas of use in housing construction, the difference in technical indicators.

Application features

Before buying, you need to decide for what purpose it is used. Finishing different surfaces has requirements under which only one of these materials can be used. These include the following criteria:

• Accommodation features. The main difference between building materials is that plywood is a completely environmentally friendly material, the production of which does not use toxic impregnations. This quality makes it possible to use it in a children's room, and the material is perfect for eco-style. At the same time, formaldehydes can be used in the production of drywall (when choosing a cheap material), PVA glue;
• surface in the room. You should not lay one product at the same time for the ceiling, walls and floor. For example, drywall is best suited for finishing the walls of a room; it can be used to carry out various design ideas. Plywood is best suited as floor covering on laminate;
• Room humidity. For the bathroom, kitchen, it is not recommended to lay plywood, since the level of resistance to moisture is not very high. Gypsum works best for this. It can be used in wall decoration even with a high level of dampness;
• If there is a finishing of a wooden structure, then it is also better to choose drywall. Due to resistance to high level humidity, because the condensate that forms during temperature changes will not spoil the material, unlike the use of plywood;
• For creating interior partitions gypsum is also best suited. It has high strength, but the walls will be thin. Very rarely, building components are made of plywood.

Main differences

In addition to choosing Construction Materials it is necessary, based on the characteristics of the room, the following qualities must also be taken into account:

• Further surface finishing. Here it is worth giving the primacy of drywall, as it can be subjected to various finishes, it can be wallpaper, paint, plaster. At the same time, you can change the finish with ease. Plywood finishing options are less diverse, so it cannot be said about the aesthetics of use. It does not withstand painting, only wallpaper can be used;
• Surface leveling. If you want to qualitatively level the surface, it is best to use drywall. Plywood copes with this quality several times worse;
• resistance to the combustion process. It is also worth giving preference to the previous one. It belongs to fire-resistant materials, and plywood burns much better.

Pros in favor of drywall

In addition to the advantages already listed, it is worth noting that according to all the criteria for arrangement, experts distinguish drywall. The following positive aspects of its use can be distinguished:

• Ease of processing and installation. This does not require special tools, installation for any surface can be done by hand;
• Due to the fact that it is not treated with impregnations on top, it is possible to create any decor;
• You can create flexible structures compared to plywood, it is possible to create incredible shapes.

Sheathing can be done both with drywall and with plywood. What is better is up to you to decide. Before choosing which material is better to use for work: drywall or plywood, you need to decide what you want.

plywood is more natural material, since in itself it consists of birch veneer and glue, which fastens all layers of plywood together. There are many varieties of plywood, one more stable and durable, the other more flexible. But in general, the material is quite useful and practical. Plywood can be five-layer, three-layer and simply multi-layer. In general, plywood is used to provide insulation in industries such as: aviation, shipbuilding. In addition, it serves as a material for bushings for bearings.

As for drywall, its materials cannot be called environmentally friendly, because. its surface is a cardboard sheet, and inner part fills gypsum dough with various chemical additives.

Features of both types of materials

Also, when determining: drywall or plywood, consider other features of these materials. The only and main disadvantage of plywood is deformation due to any type of humidity. Therefore, using this material it is better to check the humidity of the room. Although plywood is well suited for laying floors, as well as for extensive installation. Drywall, of course, has more advantages: it is resistant to moisture, suitable for building partitions or ceiling sheathing, in addition, it is great for quick installation.

Disputes as to what is better plywood or drywall are ongoing between builders. Some say that the best drywall material is simply not to be found. It is moisture resistant, difficult to ignite, in addition, profiles can be easily found under it. It is easy to use and quite cheap.

Plywood is being defended by those who fight for environmentally friendly building materials. Plywood may be a little more expensive than drywall, but it's made from natural materials. In addition, the strength of plywood has not been in doubt for many years, and drywall, in turn, is a rather fragile material in this sense.

In general, which is better: drywall or plywood - it's up to you. Those who are more concerned about the environmental friendliness of their premises and the strength of materials, plywood is suitable, but those who prefer a cheap and easy-to-handle material, drywall is more suitable.

Now we in the cities are doomed to counters of everything and everyone. The freaking "craftsmen" immediately rushed to teach everyone to twist the water ones. And then was born" typical scheme"installation of a water meter, which includes a valve that prevents manipulations with the device. Because of these valves, problems with boilers climbed and rushed through the forums, groans and panicked cries -" Akhtung! Increasing pressure in the heating pad! What to do?" If there were no this valve, there would be no problems. And manufacturers and traders began to cash in on the so-called "security groups." But that's another topic ...

• 37 responses

Dear builders. I would like to know detailed process CORRECT alignment of the walls (reinforced concrete), with a composition such as Knauf ... In this business I am a teapot, but I want to make my daughter’s bedroom beautiful, but there is not much money to pay professionals for the work, and there is no guarantee that good pros will come across ... So I want to know what and how, and how much a pound is dashing. Thanks in advance for the advice. The walls will be leveled for further painting with Sherwin Williams paint.

• 1 874 replies

Continuation of the "balcony is not like everyone else" .

It came to some furniture on the balcony, they didn’t really turn around, so we decided to get by with a couple of pedestals. The furniture makers did their job in principle normally, but there was a nuance that apparently was beyond their power, or there were other arguments. The hostess was satisfied with everything, except for the design of the adjoining countertops to the windowsill. On the one hand, it seems that you can’t do it differently, all the more so the window sill turned out to be bent, on the other hand

Show something different from the tables on the blog, otherwise I haven’t been for a long time.

Children's themes have recently captured me not childishly. Various items were asked to make in the kindergarten.

The first subject, educational, necessary and useful. This is a traffic light, by which children will learn the rules traffic, an archival thing.

I’ll make a reservation right away, they also made a version of the pedestrian with little men, but simpler from cardboard.

In principle, this three eyes were also asked to make a cardboard-simple one, but how can I do it without problems)) I thought, why not make a reliable academic subject right away, and I did. How much is enough.

The concept of the figure is as follows, large enough for everyone to see, stable, durable and with swivel mechanism, the meaning is that there are 4 sides, one side shows all the signals for a general understanding of the device.

The other three sides on one signal, the teacher can turn and show any color from 3 and ask the kids about its purpose.

In general, I thought it would be right

The initial thoughts about color circles on magnets and other light bulbs had to be canceled, we need a simple, understandable solution that is difficult to break, magnet circles can be lost, battery bulbs fail.

I don't know if it worked out, but time will tell.

The whole base is MDF, which glued the pva, for a temporary tack, also fastened it with a micro-pin.

Separately, I note that it is possible to make circles of various diameters on the circular and, most importantly, of the same size, using a non-tricky device, first we cut square blanks, and then on the device, rotating the part, cut off the corners to the polyhedron, and then rotating the part, we add to the circle.

I glued the box, the visors are halves of the eyes of the circles, I made a groove under them with a milling cutter, so such things cannot be reliably glued into the end.

The whole thing revolves on a pipe from the Joker system, in my opinion, for shelving, so that the stops do not fall out and fail, which I fixed with bedbugs.

I made the base massive and wide from thick layers of MDF, with such a base it is not so easy to tilt the traffic light on its side.

I played the fool and drilled through the pipe, I had to slap a plate from the return line.

I painted everything from a spray can, then varnished it, the thing is ready.

I did not paint the signal mugs, they are cut out of self-adhesive paper, so it is easier to update the demonstration item.

Who has read, look at the slides

Hello brothers in repair! For a long time I didn’t write anything here, and in general I rarely began to come in, everything somehow lacked time: now drinking, now partying, and now a new “attack” has attacked me. But knowing that you, in spite of everything, stubbornly do not forget me, I decided not to be a piglet, and to tell you about my new hobby. I'll start from afar: almost all my conscious life I worked as an electronics engineer, moreover, an engineer-developer of electronic and electrical devices myself. wide class and appointments, and at the same time purely in the "defense industry". It is clear that the scope of my amateur radio interests was limited only by my laziness, there were simply no restrictions in radio components for me, I had EVERYTHING! Well, following the trends of the then amateur radio fashion, I mainly focus on radios and amplifiers, essno, on transistors and microcircuits. I haven’t been working in this area for a long time, and I threw everything into a landfill for a long time, but in my soul all this time a dream was glimmering - to make a tube power amplifier, and not a simple one, but one that would make everyone gasp. And I must say, at work, most of my time I dealt with electric vacuum devices, radio tubes, if in a simple way, so this topic was well known to me. And then there is this fashion for a "warm tube sound", for which people literally go crazy. In short, a year ago I decided to make my dream come true. I immediately decided: the mainstream, conventional tube amplifiers with an output transformer, are not interesting to me, this is not a royal business! Why not invent a TRANSFORMERless tube amplifier for me. Well, I had a good idea of ​​the difficulties along the way, and I had some of my own thoughts on this matter, but still I decided to consult with the radio amateurs. I found a suitable group on Facebook, started publishing in it myself, and somehow asked a question