Simple ways to remove scale from a kettle. How to effectively descale the inside of a kettle and remove dirt from the outside using simple home remedies Homemade kettle decalcifier
The water in our taps leaves much to be desired, and the question of how to descale the kettle does not lose its sharpness. For electric kettles, the sediment on the walls is not just a terrible internal one, but a deterioration in the thermal conductivity of the metal in proportion to the thickening of the layer, which provokes a decrease in the power of the heater and its service life (wear work has not done anything better yet). Boiling water requires increased time and energy costs. Scale has a similar effect on ordinary kettles - the burner also needs much more time. Outcome: overspending, premature wear household appliances.
The scale that has settled on the heating elements of heating boilers often leads to rupture of pipes. Whether she can break the heating element of the kettle is unknown. Apparently, because the housewives are used to descaling kettles - let's figure out how they do it.
How to clean the kettle from scale at home
There are enough ways to clean the kettle at home. The stores offer a wide range of special tools. Some of them work instantly, and some do not work at all. It depends on the manufacturer, his honesty. The vast majority of descaling tablets/liquids/gels are based on acetic and citric acids.
regular teapot
At home, vinegar and citric acid are added:
- brine;
- baking soda;
- fanta, sprite, coca-cola;
- potato and apple peels.
Not all products suitable for cleaning ordinary kettles are suitable for treating electric ones. The point is the duration of exposure and the proper temperature: if you need to boil for a long time on a quiet fire, in this way it will not be possible to descale an ordinary electric kettle, but a thermos kettle can.
How to clean a kettle with vinegar
Kettle-thermos
This descaling method is suitable for regular kettles and thermos kettles with temperature control. Vinegar must be diluted with water in a ratio of 1:10 (100 ml of vinegar per liter of water), fill the kettle with the solution and put it on the stove (turn it on). As soon as the water boils, you need to see if the scale has exfoliated. If the walls of the dishes have not yet been freed from sediment, leave to boil on a quiet fire for about 15 minutes (the electric one will not boil quietly, therefore the method is not suitable).
Important! After the procedure, the dishes must be thoroughly washed, boil several portions of water in it, and ventilate the room well.
How to clean the kettle with citric acid
Descaling the kettle with citric acid is a universal method that is equally effective for conventional and electric (metal and even plastic) models. Citric acid must be dissolved in water at the rate of 2 teaspoons per liter. Pour the solution into the kettle and boil.
Tip: Don't let your cookware get to the point where descaling will require hard cleaning. With the help of citric acid, carry out prophylaxis: fill the kettle with a solution, as soon as plaque appears on its walls, and leave it for several hours.
How to remove scale with soda
With soda, they do the same as with vinegar, but they boil longer. It is necessary to pour soda with water at the rate of 1 liter per tablespoon, put on the stove, let it boil, reduce the heat to low and keep for half an hour so that the solution barely boils.
After half an hour of boiling, the liquid must be poured out, the kettle thoroughly washed and boiled in it already. clean water and then pour it out too.
Non-format: soda, pickle, cleaning
Obvious vinegar and citric acid can be replaced by non-standard, even unexpected, means. The scale in the kettle is perfectly handled by food and drinks.
soda
Excellent tool - "Sprite"
Soda is so "safe" that it does a great job of decalcifying kettles. Why are there dishes - they successfully wash car carburetors with sweet water. Sprite, Coca-Cola and Fanta do the same, but it is better to use Sprite - Coca-Cola and Fanta may well leave colorful stains on metal walls instead of scale.
The method is suitable for any kettles - you don’t even have to keep it for a long time (such a “fusion” composition): you need to half fill the kettle with a miracle drink and bring it to a boil. It is first necessary to rid the water of the gas (it does not clean the gas - the caustic substance is contained in the water itself). The method is beautiful in its clarity. It can serve as a help and evidence base in educating children about the harm of purchased soda.
Brine
Same good way cleaning electric kettles from scale - no need to simmer for a long time. The same vinegar works as an active substance - brine is not an independent remedy. To clean the kettle, it is enough to fill it with brine, boil, cool, empty and thoroughly wash. Cucumber pickle is especially effective.
Anti-calc cleaners
This method is ancient - it was successfully used by our grandmothers and great-grandmothers. Potato and apple peels are used as a cleaning agent (not starch works, but acids). Descaling is simple: you need to load the peel into the kettle, pour water and put on fire.
After the water boils, you need to remove the dishes from the stove, leave for a couple of hours, then rinse thoroughly, draining the solution. Before the procedure, cleanings are also thoroughly washed, if they are potato.
How to descale a particularly neglected kettle
Unfortunately, this method is not suitable for an electric one, but an ordinary kettle, even if it is in a very neglected state, can be cleaned. The success of the method is ensured by complex processing. You need to act in three stages:
- Fill with water, add a tablespoon of soda, boil and drain the solution.
- Fill with water, add a tablespoon of citric acid, bring to a boil and leave for half an hour over low heat; drain the solution.
- Fill again, add half a glass of vinegar, let it boil, leave for half an hour on a quiet fire; drain the solution.
Metal kettle that can withstand tough cleaning
After the procedure, you need to thoroughly wash the dishes, boil several portions of water “idle” in it.
It happens that the sediment remains on the walls, but after such an impact treatment it is easy to remove it with a dish sponge.
Important! Do not use hard brushes, especially those with metal teeth, and abrasive sponges.
Tip: Buy a glass electric kettle with a heated bottom. It is impossible to start it: transparent walls will not allow; scale does not settle on the walls, but floats in flakes; a special cleaner for dishes, glass, ceramics (Cillit, for example) can easily get rid of plaque.
Model with heating bottom and glass walls
At home, it is not so difficult to clean the kettle from scale, but it will take time. Sediment appears due to excessive mineralization of water, but this can be avoided by using purchased water. It is inexpensive (especially when it comes to health: the body does not rejoice when salts and minerals are excessively introduced into it), and you do not have to periodically remove scale.
The water flowing from the taps is not the most best quality. Scale on the walls not only gives an unpleasant aftertaste to brewed drinks, but also increases the heating time of the device, reducing its thermal conductivity.
The same applies to regular enamelled metal teapots. The resulting plaque requires a longer stay of dishes on the stove. As a result, electricity or gas is consumed. Therefore, the question of how to clean the kettle from scale at home remains relevant for many.
It doesn't matter which kettle you use Everyday life- electric or metal. Scale can appear on each of the appliances. And no filters or even boiling artesian water High Quality will not help to avoid this trouble.
For scale - more terrible threat, since the product can not only begin to fulfill its purpose worse, but also completely fail. And simple appliances can also become so "overgrown" with lime on the inner surface that the use of the strongest cleaning agents will not help get rid of it.
Therefore, any care must be timely. No need to delay this, postponing the process for later. Otherwise, you risk being left without the device.
For the process of scale formation on each of the kettles, several points are characteristic.
All scale is formed from tap water, containing many different salts that settle during boiling on the walls of containers.
Therefore, the question of how to clean the kettle inside from scale worries us much more, because it is much easier and faster.
The rate of scale formation depends on the concentration of salts in tap water and increases in proportion to their number. All newfangled filters can, of course, soften water, but they will not be a panacea for scale.
But not only teapots suffer from scale. It can also harm our body. And, above all, the organs of the urinary system and kidneys.
Citric acid is one of the most effective means in the fight against scale. Its use will not cause difficulties, but it will help to quickly clean the kettle.
Pros - accessibility this tool and its effectiveness. But how to clean the kettle with citric acid? The process is carried out in several successive steps.
- Count the right amount"lemons". It is related to the degree of contamination of the device. The more scale, the correspondingly more lemon powder should be taken. The best option will use two or three packs per unit.
- Fill with water, about 2/3 of the volume of the dishes. If the localization of scale falls on the upper walls, then pour water to such an extent that it covers it.
- Pour the acid into the water and stir until all the crystals are dissolved.
- If the scale is fresh, then there will be no need to boil the "lemon". You can simply prepare the solution in the above way and leave for several hours. After that, rinse the dishes and boil it clean water.
- If the case is more complicated, then the prepared solution should be boiled in a kettle for 10-15 minutes, then pour it out, rinse the product with clean water and boil again.
- It is better to repeat the procedure for fixing the result a couple of times.
Vinegar is another tool that helps to descale the kettle at home.
To do this, water is poured into the device in the same volume as in the previous method, and vinegar is added at the rate of half a glass of vinegar per 1 liter of water. If there is no vinegar, then vinegar essence will do.
In this case, its amount should be reduced (take 3 teaspoons of essence per liter of water). Boil water for 3-5 minutes, let it cool completely, drain and rinse the kettle with water. Repeat boiling only with clean liquid at least two times.
If the old plaque does not go away the first time, then the process can be repeated. Also, softened plaque is removed by rubbing it with a sponge.
However, vinegar should not be used to clean kettles powered by electricity.
Soda is suitable for enameled and electric kettles. She is affordable but at the same time universal remedy, very effective in the fight against lime deposits on the walls of kettles.
However, you need to be careful with it, because hard grains can ruin surfaces by scratching them.
Most likely, cleaning the kettle with soda will have to be repeated. Since it is quite mild, one application for a heavily damaged surface will not be enough.
You need to fill the kettle halfway with water and pour two teaspoons of soda into it. Bring the water to a boil, then, reducing the flame, boil for 25-35 minutes. Drain the water and rinse the inside of the kettle.
If the kettle is electric with an auto-off mode, then simply leave the water with soda in it until it cools down completely after the appliance boils.
other methods
It will also help to solve the question of how to descale an electric kettle, ordinary soda. To prevent the inner surface of the appliance from becoming dark color, it is better to use colorless drinks. Sprite is perfect. It must be poured into the kettle and let the product boil. The scale will evaporate after such a process without a trace. The same method will work for a regular metal teapot.
Before you start using soda, you need to let all the air bubbles out of it. You can leave the bottle open or pour the liquid into a spacious dish.
Another effective method removal limescale will be peeling potatoes, pears or apples. They need to be washed, put in a kettle, pour water. Then boil for 5-10 minutes.
In addition to limescale inside the kettle, another unpleasant phenomenon is the appearance of rust. It is associated with an excess of iron contained in tap water and its hardness.
You need to get rid of rusty plaque in a timely manner, because in addition to giving bad taste tea or coffee, it can be harmful to health.
Citric acid and vinegar, which were mentioned above, will help not only to remove scale from the walls of the appliance, but also to remove rust. You need to do the same with them as when removing scale from the inner surface of the kettle.
Other available and original means and methods will help get rid of rust.
- Washing powder and potatoes. Sprinkle the powder on a moistened surface and rub these places with half a potato. Rinse thoroughly with water.
- "Coca Cola". Pour the drink into the teapot and leave overnight. In the morning the device will be ready for use.
- Cucumber pickle. Pour it into the kettle and boil for 5-10 minutes. Drain and rinse the dishes with water until the smell is gone.
- Spoiled milk. It is also boiled in a kettle.
Prevention measures
To prevent the appearance of scale and rust, it will not be superfluous to observe a few points.
- After use, leave kettles dry by pouring out all the water. Its residues produce calcium. It is converted into scale and affects the walls of products.
- Clean kettles at least monthly. The more often the procedure is performed, the less effort will have to be expended in the future. In addition, it will help to maintain the performance of the product for a long time.
- Boil in the kettle only distilled water or filtered water.
- Rinse the kettle with a sponge after each use. So it will turn out to remove scale at its initial stage.
There are many tools and methods to help clean the kettle from scale. But their effectiveness will depend on how quickly you get to work.
The longer the kettle will accumulate scale, the more time you will have to spend on washing it. In any case, use the best proven methods, otherwise the risk of damaging the device increases.
Even if you have got home system water filtration and boil only purified water for making tea,
Still, the formation of scale cannot be avoided. Filters are not able to remove all substances dissolved in the water that are responsible for the formation of lime deposits.
And sooner or later you will find that the walls and bottom of your favorite whistling kettle or the heating element of an electric boiler are covered with a layer of dirty yellow coating. This means that it's time to remember how to descale the kettle and restore its cleanliness both outside and inside.
When cleaning, do not forget that not all products are equally suitable for conventional and electric vessels.
Why you need to remove limescale
There are several reasons for this, and each is quite serious.
- The lime layer prevents heat transfer. If this is not fatal for an ordinary stainless steel kettle, then an electric one can simply burn out. The heat from the spiral or disk is not transferred to the water, the metal is subjected to thermal overload. In conventional kettles, this increases gas consumption: water heats up more slowly.
- The scale layer makes it difficult to keep the vessel clean. Particles of lime sediment get into your cup, and all this garbage is not useful for the body at all.
Descalers
In the store you can buy ready-made products that remove scale. Some of them are quite effective, others may not give the desired effect.
And it's not just about the quality. household chemicals how much from other parameters: the composition of the water in your water supply, the thickness of the layer of lime deposits, etc.
How to clean the kettle from scale at home
Lime deposits are successfully removed by simple and cheap means:
- citric acid;
- table or apple cider vinegar;
- soda;
- lemons, apple peels or potato peels;
- pickle from cucumbers or tomatoes;
- carbonated drinks: Coca-Cola, Sprite, Fanta.
♦ citric acid you can descale any kettles: stainless steel, ceramic, enameled, electric plastic or glass. This simple substance removes small and medium build-up.
Ingredients: water - about 500 ml and citric acid - 1-2 tbsp. spoons (depending on the degree of contamination).
Pour water into the kettle and boil, then pour citric acid into boiling water and wait for the water to cool for about 1-2 hours (be careful - the acid that got into hot water, "hiss"). If the scale is not old, then it will come off on its own, otherwise you will need to make a little effort: carefully clean the walls and bottom with a plastic washcloth or brush.
Metal hard washcloths should not be used to remove scale.
Citric acid can be substituted fresh lemons: coarsely chop one or two lemons, boil them and leave to cool.
♦ Manufacturers of electric kettles do not advise using vinegar to remove mineral deposits - after all, it is too aggressive. But sometimes you can't do without this powerful tool.
The method is suitable for: plastic, glass and metal teapots with very big amount old scum.
Ingredients: water - about 500 ml and vinegar 9% - a little less than 1 cup or vinegar essence 70% - 1-2 tbsp. spoons.
Pour water into the kettle and boil it, then pour acetic acid into boiling water and leave the scale to soak in the solution for 1 hour. If the scale has not gone away on its own, but only loosened, then it will need to be removed with a sponge. Remember to boil water in a clean kettle once or twice, and then rinse it well to wash off any remaining vinegar.
♦ enameled and aluminum cookware afraid of aggressive acids, so the first 2 ways to remove limescale are not suitable for them, but the usual one can help you soda solution.
The method is suitable for: descaling both in ordinary enameled and aluminum kettles, and in any electric kettles.
Ingredients: baking soda, and preferably soda ash - 1 tbsp. spoon, water - about 500 ml (the main thing is that it covers the entire limescale).
Recipe 1: to remove scale from the walls of an enameled or aluminum kettle, you must first mix soda with water, then bring this solution to a boil, and then leave it to simmer over low heat for half an hour. At the end of the procedure, we wash off the remnants of soda, for which we boil clean water 1 time, drain it and rinse the kettle.
Recipe 2: to clean an electric kettle with baking soda, you need to boil water, make a soda solution, and then let it cool for 1-2 hours. A more gentle way is to pour soda into boiling water, and then leave the solution to cool completely - during this time, the mineral deposits will become softer, and it will be easier to wash them manually.
♦ Removes small deposits successfully boiling apple peels or potato peels.
This product is suitable either for preventive care or if the limescale is still weak.
The method is suitable for: descaling conventional enameled and metal kettles.
Ingredients: apple, pear or potato peelings.
I put block, pear or washed potato peelings in a kettle, pour water and bring to a boil. As soon as the water boils, leave the peel to cool for 1-2 hours, and then wash the softened plaque with a sponge.
♦ Works well with layers of scale cucumber or tomato pickle. The organic acids contained in it dissolve lime deposits. But then it is quite problematic to eliminate the smell of pickles, and it does not harmonize too much with tea and coffee.
♦ Carbonated drinks remarkably dissolve resistant lime layers due to the content of phosphoric acid. Many people know that Coca-Cola can be used to remove scale and rust not only from a kettle, but also from other household items.
Coca-Cola removes old greasy contaminants in the sewer, it dissolves traces of rust on old bathtubs and washbasins, etc.
The method is suitable for: descaling in ordinary stainless steel kettles and for electric kettles, but for enameled and tin ones - with caution. If you want to descale a white kettle, then it is better to do it not with Coca-Cola or Fanta. These intensely colored liquids leave a colored coating on light-colored materials, which will have to be dealt with separately. Better take a colorless soda: "Sprite", 7UP. The effect will be the same as when brushing with Coca-Cola, but without the color effects.
Before descaling the kettle with carbonated drinks, all the gas must be removed from them. Open a Coke bottle and leave open for a few hours before cleaning. Otherwise, when boiling the drink, it forms foam in such quantities that you clean the kettle not only from the inside, but also from the outside, and at the same time the entire kitchen :).
This method is not the most efficient and economical, but why not try for fun?
How to deal with old deposits
The most powerful, old scale deposits are removed in several stages. You will need soda, a solution of citric acid and vinegar.
First, you wash the kettle inside and out as much as possible. Then pour half a glass of soda inside, pour water and boil the solution for about 20 minutes. You can leave the soda solution to cool, or drain it immediately. Soda itself does not remove scale, it will only help to cope with thick deposits.
At the second stage of the fight against scale, you need to pour a solution of citric acid into the vessel: about 40 g of powder will be needed for 3 liters. Acid with soda, absorbed into the layers of scale, will react. In this case, gas will form, the bubbles of which will loosen the limescale.
When you drain the citric acid solution, you can boil the kettle with the soda solution again, or you can immediately proceed to the next step: act on the scale with vinegar, table or apple cider vinegar. Boiling with vinegar will dissolve the most stubborn layers. Pour a third of the volume of vinegar into the vessel, and add the rest with water and boil for 30 minutes over low heat. Drain the solution and wipe the inside of the vessel with a washcloth of medium hardness (but not metal).
Cleaning the kettle from scale with vinegar.
After cleaning, you will have to thoroughly rinse the kettle and boil water in it two or three times, draining it. This method is only suitable for ordinary kettles; for electric kettles, it can be overly aggressive and destructive.
- Do not leave water residue in the kettle after use. This habit increases the amount of calcium sediment on the walls of the container. Pour water for plants or separately into a carafe and use it cold, or boil the amount of water you want to use.
- The more often you remove scale deposits, the easier it will be to do it. Descale the kettle at least once a month if the water is medium hard and once every two weeks if the water is hard. This will help save the device and extend its life.
- Use only filtered or distilled water for boiling.
- Rinse the inside of the kettle with a washcloth after each boil to remove the slightest trace of limescale.
How to remove scale from the kettle? Vinegar, citric acid or Coca-Cola? We check folk ways to deal with scale!
PS. Buy an electric kettle with a closed coil or heating disc. They are much easier to care for than open coil models. It will also be easier to remove the scale that has appeared.
Note to the owner.
Scale in the kettle worries every housewife. She not only spoils appearance device, prevents water from boiling faster, but also leads to breakage. Also, scale is extremely dangerous for the body, as it interferes normal operation kidneys and excretory system.
Using filtered water, you will temporarily postpone the problem, but someday scale will still form and you will have to remove it. Therefore, advice on how to do this without damaging the heating element will always come in handy.
Rules for operating an electric kettle
But first, let's talk about what will prevent it from forming quickly and extend the life of your kettle:
- do not boil the same water several times, it is bad for your health;
- do not put the device to warm up if it is less than half full;
- make sure the lid is tightly closed;
- don't let it hit various items inside the kettle
- do not clean it with harsh abrasives or metal sponges;
- do not touch the heating surface, do not try to clean it mechanically;
- do not clean the electric kettle with soda, it will stain the walls;
- Descale at least once every two weeks.
If you did not know about the rules for using the kettle before, now remember them and follow them. Then it will serve you much longer than its lifespan.
In household chemical stores, you may be offered special products to help clean the inside of the appliance from deposits, but do not rush to purchase them. The composition of such powders contains a lot of chemistry, which is dangerous to health when it comes into contact with the skin and in the body. You better try folk methods, which are also effective, but, moreover, and safe.
table vinegar
The most popular method is to use vinegar. Dilute it with water 1 to 10 and pour it into the kettle to the middle. Let it boil and leave for 15 minutes. Then repeat the procedure two or three more times and rinse the kettle well. If scale particles remain on its walls or heating element, then fill in new water with vinegar and do the whole process again. But next time, don't let it get to that point.
When cleaning is complete, pour plain water and boil the kettle. Pour out, fill in a new one and substitute it again to warm up. Water poured for the third time can already be drunk without fear that the vinegar remains in the kettle.
Lemon acid
Another cleaning method is the use of citric acid. Dissolve 20 gr. powder per liter warm water and pour into the device. Leave to act for 4 hours and then drain. After that, evaluate how clean your kettle is. If there are traces of scale on it, then pour diluted citric acid again.
In the case when the scale layer is several millimeters, this method will not work. We'll have to do it differently. Pour the solution and heat it several times. After citric acid, it is enough to boil the kettle with clean water only once.
Cleaning with vinegar and citric acid
If you have never cleaned your kettle before and have a decent layer of scale build up on it, then try the method below. Pour a solution of vinegar with water into the device, boil it and leave to cool. Then drain and fill with diluted citric acid. Bring to a boil again and wait until the water is cold. Alternate these techniques three times, and then, if all the scale has not been removed, carefully scrape it off with a sponge.
Instead of these solutions, you can use strained cucumber brine. It also contains vinegar and citric acid. Just pour it into the kettle and boil. Then rinse well inside appliance and boil the water empty once.
Soda
You can clean the electric kettle with baking soda. To do this, boil water in it, and then add 3 teaspoons of soda to it and mix well. After half an hour, drain the solution and repeat the whole process. At the end of cleaning, do not forget to boil water without additives once and drain it. This will help get rid of soda residue on the walls.
Do not try to remove scale with undiluted soda powder, it has harsh abrasive properties and will scratch the surface of the heater. If boiling does not help, add one tablespoon of acetic acid in addition to it. When the soda begins to extinguish, it will dissolve even the hardened scale.
The invention of housewives knows no bounds, and they go to new tricks to get rid of the hated raid quickly and without extra costs. Do not repeat their mistakes and do not waste your time on useless activities, in this case it is better to purchase antiscale.
coca cola or sprite
To some, this method may seem effective, but do not flatter yourself with illusions. Citric acid, which is in the composition of each of these drinks, helps to cope with plaque. Only its pure powder is several times cheaper than sweet water and does not have dyes and harmful preservatives.
Cleaning and peeling
The fact is that the main substance that dissolves scale is again acid, but it is contained in a minimal amount that does not affect the result. Besides, if foreign object gets on the heating surface, it will ruin it.
Take care of your kettle, clean it in a timely manner using the methods described above, do not leave water overnight, use only filtered water, and then it will last a long time. Don't forget that clean kitchen appliances is the key to your health.
Video: how to descale the kettle in 3 minutes
Limescale that appears over time on the walls of a new electroteapot, can spoil the mood of any housewife. Existing methods will help keep it clean on an ongoing basis.
Causes and consequences of scale formation
The formation of plaque on the walls and spiral of the electric kettle is due to the use of hard water containing a significant amount of mineral salts.
Important! Scale on the walls of the electric kettle slows down the heating of water, and accordingly contributes to a greater consumption of electricity due to an increase in the time spent on boiling reading. Additional disadvantages - an increase in the noise emitted by an electric kettle during heating, boiled water acquires an unpleasant aftertaste. In addition, sediment microparticles fall back into the water, polluting it.
The presence of scale reduces the life of electrical appliances, leading to their breakdown.
There are two ways to remove deposits:
- mechanical;
- chemical;
The use of the first method, in addition to requiring certain physical efforts, can also damage the heating element of the kettle or its body.
The effectiveness of the second method depends on the application:
- special cleaning products of industrial production;
- baking soda;
- citric acid;
- vinegar;
- carbonated water.
It is impossible to get rid of scale forever, since even the cleanest and filtered water contains a certain amount of calcium and magnesium salts, which settle in the form of scale on the walls and the heating element under the influence of high temperature.
Electric Kettle Cleaning Methods
Method 1
- A combination of vinegar or citric acid and soda will help get rid of old scale:
- To do this, add 1/2 stack. soda in a kettle of water and bring the soda solution to a boil.
- Turn off and soak for 20-30 minutes, drain the water. Then pour fresh water and add 2-3 tbsp. l. citric acid or 1/2 cup vinegar.
- Bring to a boil again, turn off and let stand for about 30 minutes. Pour out the water and rinse the kettle thoroughly.
- Scale that remains on the walls can be easily cleaned with a kitchen sponge.
Method 2
The use of soda alone has a more gentle effect:
- Pour soda ash into boiled water and leave to cool completely. soda solution soften lime deposits, make them loose, which will allow you to easily clean them with a sponge.
Method 3
- An acetic solution has an effective cleansing property that allows you to remove a thick layer of scale: 2 parts water to 1 part vinegar, poured to the top in a kettle and heated to a boil.
- After that, the electric kettle is left to cool slowly, and then thoroughly washed using detergents.
The disadvantage of this method is a strong smell, which can then be removed only after prolonged ventilation.
Important! Do not use undiluted vinegar, as it can destroy the plating of the heating coil.
Method 4
- Cope with small deposits of plaque on the walls of the kettle can 1 liter of carbonated water: "Sprite", "Schweppes", "Coca-Cola", which is poured into the kettle and kept for 2-3 hours.
- The effect is achieved due to the content of these drinks phosphoric acid - a substance that can remove deposits of lime salts.
Advice! Experienced housewives it is recommended to use colorless soda for electric kettles of light colors first of all, since the coloring pigment of colored drinks can eat into the walls and it will be quite difficult to remove it.
Method 5
Citric acid will help clean the electric kettle with plastic case against moderate and slight lime deposits:
- To do this, pour citric acid into a kettle filled with water - about 100 g and heat to a boil, boil for several minutes. Then turn it off, leave it to cool completely, then drain the water and rinse the kettle thoroughly.
- Then it is filled 2 more times with water and boiled. This method is not as aggressive as the acetic acid method, so it may be necessary to repeat the procedure.
Alternatively, you can also use lemons cut into slices with the peel on.
They are placed in an electric kettle, filled with water and boiled. In addition to the cleansing effect, this method has an additional bonus - a pleasant aroma.
Method 6
- As a cleanser, you can try fresh sorrel, which is placed in an electric kettle, poured with water and heated, boiled for several minutes.
- Then leave to cool completely, drain the water and clean the scale with a sponge. The content of oxalic acid in the leaves of this vegetable crop allows you to soften hard lime deposits, make them more loose.
Preventive measures
- You should not allow the formation of a thick layer of scale, since it will be much more difficult to remove it. Preventive cleaning of the electric kettle from limescale is recommended as needed and at least once every 1-2 months.
- It is also not recommended to leave water in the kettle after boiling, as well as overnight.
- Daily washing of the teapot with a sponge prevents the appearance of plaque.
- Although modern water filters do not protect against the formation of limescale, the use of specially filtered water for boiling allows you to keep the kettle clean longer.
- When buying, it is better to choose models with a heating disc or a closed coil, since the maintenance of such kettles is much easier.
Some of the described methods are drastic methods used in the accumulation of a thick layer of scale. Special funds household chemicals presented on store shelves are also able to clean scale from the walls of an electric kettle. They are used in accordance with the instructions on the package.
Constant observance of simple rules for keeping the electric kettle clean will extend its service life.
