Glowing trees for the street - a fairy tale with your own hands. LED trees - a new type of holiday lighting How to connect an LED tree with your own hands
Content:Currently, there is a huge range of decorative lighting products that are successfully used for decorating rooms and streets. LED trees are becoming especially popular. various types, which serve not only as a decoration, but also perfectly complement the illumination of buildings with adjacent territories. Due to their qualities, they fit perfectly into almost any interior. IN daytime artificial trees look quite natural, and with the onset of darkness they begin to delight others with all the colors and shades.
There are many for sale finished products, however, if you wish, you can make an LED tree with your own hands. An important positive factor is low energy consumption, so such trees are increasingly used for decoration in offices, shops and restaurants, attracting the attention of potential customers.
LED tree for house or apartment
Most often when self-manufacturing Indoor LED trees use two main methods.
Tree with LED garland
The manufacturing process begins with the frame, for which the best way fits aluminum wire. It easily bends to any angle future design any configuration. A more realistic color is obtained by wrapping the white insulation of the wire with black electrical tape.
Then, the finished frame is evenly wrapped with a garland, fixed to the wire with black electrical tape. If desired, you can create additional decorations for LEDs in the form of decorative nozzles made of transparent plastic. Upon completion of the work, the manufactured tree just needs to be connected to the electrical network and its performance can be verified. Thus, the question of how to make an LED tree with your own hands can be considered resolved.
The main advantage of this method is the ease of manufacture. The main disadvantage is the impossibility of making wood large sizes. This is due to the standard length of the garland, which is not enough to fit the entire tree. Therefore, this method is most suitable for the manufacture of miniature products, which are also very popular.
LED tree
Making a tree from individual LEDs is considered a more labor intensive process. However, this method does not have the disadvantages inherent in ready-made garlands, which makes it possible to manufacture structures of any shape and size. The main material is 5mm LEDs. Resistors are needed to equalize the voltage.
Direct manufacturing begins with soldering. The LED contacts have different lengths, so the legs of the resistors are pre-shortened on one side. You need to solder the contacts of both elements very quickly so as not to damage the LED.
Heat shrink tubing is then cut for the wires to cover solder points and resistors. It is necessary to leave a place for soldering the power wire. The tube is inserted onto the leg of the resistor and warmed up a little with a lighter to give the insulation the necessary shape. This operation is performed for each LED.
After that, you can start making the tree itself. Most often, the trunk is made of thin plumbing pipes, and the branches are made of wire, about 50 cm long. 45 cm is left for the main part of the branch, and 5 cm remains for attaching it to the trunk. Small branches are cut up to 10 cm in size. The number of LEDs on one branch must be calculated in advance.
At the next stage, small branches are taped to large branches with electrical tape. The number of LEDs on each small branch is recommended to be equal to the number of LEDs on the large branch. Each LED is fastened with electrical tape.
The wires must be stretched along the entire length of the main branches, after which they are cut off taking into account the bends of small branches. The ends are wound to the trunk, after which all the pluses and minuses are connected on each branch. Their number must match the total number of branches. The wire connections are insulated. It remains only to evenly hang decorative ornaments and connect finished tree to the electrical network.
Outdoor LED Trees
Artificial trees with LEDs can be installed in any place as a decoration of the landscape and surrounding areas. The attractive power of beauty actively attracts visitors to restaurants and cafes, in shopping centers and boutiques, offices and others public places. Each luminous tree in their configuration, in many respects they resemble real plants, and sometimes they completely imitate them. Artificial bark is used to cover metal branches. The maximum similarity can be achieved thanks to silicone or plastic leaves and life-size flowers.
The entire structure of the artificial tree is decorated with multi-colored LEDs. Most often, they operate from the mains, but in some cases, autonomous power can be used, which leads to some increase in the cost of the design. Sometimes applied led garlands, however, they do not give the same effect as LEDs used alone.
Advantages artificial trees with LEDs:
- Long service life of at least 5 years.
- Artificial structures do not require the maintenance required by real trees.
- Low power consumption. Even the most big trees consume electricity in an amount not exceeding 700 watts.
- The simplicity of the design allows you to install it yourself, without involving specialists.
- Structural resistance to low temperatures, dust, high humidity and other negative impacts.
- In the event of a burnout of one or more LEDs, the rest of the chain will continue to work, and faulty elements are easily replaced by others.
- Right choice artificial trees and bushes allows you to emphasize and complement the elements.
Sakura is especially popular among LED plants. These trees are especially beautiful due to the highly durable covering of the branches with plastic or aluminum alloy. Their appearance as close as possible to the present. Despite the relatively small size, this tree gives as much light as taller structures. Sakura has a soft and delicate light range, predominantly white, pink and golden tones.
Self-made tree for the street
When making a tree with LEDs for outdoor use, it is imperative to take into account the aggressive influence of the environment. Therefore, before you start making a do-it-yourself LED tree for the street, you need to determine in advance the entire procedure.
The general scheme of work will be approximately the same as for conventional structures intended for premises. IN street version it is recommended to pay attention to a more thorough covering of the trunk and branches with quality materials.
It is also necessary to take care of good insulation of the LEDs after soldering them with resistors. The heat shrink tubing should completely hide each pair. If necessary, all unreliable places can be additionally insulated with black electrical tape. The same goes for wire connections at the plus and minus points. Decor items should be fixed more efficiently so that they are not torn off by strong gusts of wind.
Master class: do-it-yourself luminous tree
You're totally wrong to clean up after winter holidays glowing garland. There are many interesting ways to decorate your home interior with it.
1. Lay a garland around the mirror office of some interesting shape.
2. Wrap paper lanterns with a garland around the branch and hang over the bed.
3. Create a drop down light by decorating the garland with large bulbs.
4. Create an original tree from a garland.
Draw a contour on the wall, drive in carnations around the perimeter and wrap a luminous garland around them. As easy as pie!
5. Attach photos to the glowing garland with clothespins.
6. Create your own canvas with a pattern of glowing lights.
7. Thread the garland into flower baskets or put it right there.
8. Fill wine bottles with lights to effectively illuminate them from the inside.
9. Create an angel wreath from paper napkins.
Using wire cutters, form a round holder for snowflakes and wrap it with an electric garland with small bulbs. Then glue decorative snowflakes onto the holder.
10. Or use napkins to make a wedding wreath.
Just make small holes in the napkins and thread the lights through them.
11. Cover disposable cardboard cups with fancy paper, this will help create interesting light shades with the help of an LED string.
12. Crochet a glowing rug with a rope and a garland.
13. Decorate your Christmas garland with tulle bows.
14. To create a festive mood, decorate the garland with old decorations.
15. Create colorful twine balls and decorate them with a glowing garland.
16. Make flaming snowflakes out of store-bought flower holders.
17. Tie rope with a garland for a nautical room decor.
18. Create a network of glowing garlands in the bedroom.
19. Hang air clouds with hanging luminous garland.
Pictured is a 2D version of the cloud.
20. You can also use egg cartons to create the effect of flowers.
21. Write a letter-by-letter message on pendant lights.
Make letters by punching holes in the paper.
22. Create a romantic headboard.
Bring down the simple wooden frame and add traverses. Drill small holes and insert sockets at the bottom of each niche. Paint the frame and screw it to the wall. Fill each niche with a garland and connect it to the outlets. Cut transparent panels from polycarbonate sheets and attach them to the frame with fasteners.
23. Use glitter wrapping paper to create giant glowing candies.
Required materials and tools:
- disposable Plastic container with lid;
- electric garland;
- scissors;
- wire or pipe cleaners;
- wire cutters;
- multi-colored wrapping paper;
- scotch.
Preparation method:
- Cut off a piece of wrapping paper measuring 45x45 cm from the roll.
- Wrap the garland with wrapping paper. Remember to leave both ends of the garland outside in order to connect it to the network and connect the element with other candies.
- Put the wrapped garland in a plastic container and close it. Wrap the container in wrapping paper and secure with tape.
- Use brushes or wire to shape the garland container into a candy shape.
- Decorate the entire garland in this way, leaving between the links free space(20-40 cm).
- Connect the finished bunch of candies to the network.
24. Insert flashlights into tiny canning jars.
Take special covers with a hole for the garland. Close each jar with a lid and insert a light bulb from the garland into it.
25. Insert an LED string into an old toy.
You will need:
- old toy (made of cotton fabric);
- PVA glue;
- tassel;
- scissors;
- threads;
- light garland.
26. Write a light message.
27. Arrange the luminous garland in waves.
28. Cut out black cat shapes to make this cute garland.
29. Wrap the garland around the wire wreath.
Probably one of the most simple options creating homemade wreaths.
30. Light up the canopy over the bed with a garland.
31. Cut the paper into strips to make the same fringed lanterns.
32. Use foil from a cupcake pan to decorate your garland.
This is a great idea for any party.
33. Make sparkling decorations with mirrors and lights.
Take:
- brushed aluminum bar;
- hooks for hanging;
- garland with mirror pendants;
- electric garland.
Instruction:
- Attach the bar to the wall with two hooks.
- Hang a mirror garland on the rod. To enhance the visual effect, you can cut some of the threads with pendants so that the finished curtain is of different lengths.
- Behind the pendants, stretch a light garland and plug it into an outlet.
34. Use twigs to create a rustic chandelier.
This idea can easily be implemented with a luminous garland.
Take:- dry branches;
- hemp twine;
- stain (optional to darken the color of the wood);
- wood color paint;
- lampholders with a removable cardboard cover for painting;
- plastic ties;
- glue gun;
- electrical cable black and white color;
- black electrical wire with fork;
- branch clamps "nuts".
35. Make a garland of geometric lanterns.
You can make your own lanterns from black wire or natural straw.
Take:What are glowing trees for? Luminous suit with your own hands. The LED tree "Sakura" consists of a frame and an LED garland with nozzles in the form of leaves and flowers. There are several ways to make a glowing tree with your own hands, just like the trees themselves look different. Several ways to make beautiful LED trees with your own hands at home at minimal cost.
In this article, we will look at the process of making LED trees at home. There are 2 main ways to make LED trees. A tree made in this way cannot be made large enough. The standard length of the garland does not allow placing LEDs on all the "branches" of the tree. Therefore, we recommend using this method for making miniature trees. Next, we make a tree trunk.
After that, we make the main branches, for this we take the wire and cut it 50 cm long. of which 45 cm is the main part of the branch, and 5 cm will be on the bend to fix the branch on the tree trunk. We bend 5 cm on each main branch and attach it to the tree trunk, we do it evenly over the entire diameter of the trunk.
After that, you will get the number of pluses and minuses equal to the number of tree branches. It remains only to wrap each branch with black electrical tape to decorate decorative flowers and connect the tree to a power source. How to put a do-it-yourself rear-view parking camera on a VAZ 2112. Step by step video instruction. Head units for Android and Windows.
Video tutorial on how to install a navigator on a radio (head unit) with an operating Windows system with your own hands. Video instruction for connecting DIP LEDs to a circuit with your own hands. Video lesson. How to connect flexible LED neon quickly and easily with your own hands. In this issue we will tell you why it is needed, what it consists of and how to use it.
LED bushes and trees
Flexible neon in outdoor advertising. A step-by-step video tutorial on how to easily make an incredibly beautiful luminous neon costume with your own hands. Step-by-step video tutorial on how to make beautiful retro flexible neon letters with your own hands. Today we will learn how to connect candles without batteries from a 12 volt power supply with our own hands.
We thought a lot about how great it would be to find such a garland, and in the end, she found us herself. Welcome! A small video tutorial on how to make beautiful Christmas wreaths with battery-powered garlands with your own hands. We propose to start New Year along with an unusual, original DIY holiday tree.
The desire to decorate your house or apartment is familiar to all happy owners of real estate, as well as to those who have to live in a rented room. It is to such useful decorations can also be attributed to luminous trees made of polymeric materials and equipped with big amount small LED bulbs.
Decorative luminous tree on LEDs
Depending on the purpose of the lamp and the style of the room or landscape, there are trees completely without decor. Street lights mounted on the site or attached to living growing trees. Some of these fixtures can be purchased in a completely finished form, others need to be assembled and connected.
LED trees - a new type of festive lighting
Of course, in order to get a complete picture, illustrating the equipment of an interior or landscape with a bright LED tree, one cannot do without indicating the prices for such devices.
Glowing trees for the street - a fairy tale with your own hands
LED strip for decorating growing trees (5m) - from 5 to 18 euros (depending on the frequency of placing lamps on the strip). Solder your own electronic design using separate LED bulbs, wires and insulation. Here creativity is manifested in the choice colors future tree and unique combination finished items.
One of the main advantages of LED garlands and lamps is their resistance to mechanical damage and exposure to aggressive weather conditions. Bright LED trees were created for such connoisseurs of beauty in environment and setting.
Imitating the shape of a tree or a bush, a frame made of a special light-alloy material, which is enclosed in a plastic shell. decorative elements, which are LED garlands with silicone nozzles stylized as leaves and flowers.
Glowing trees: price and equipment
Twisted with a large number of sparkling light bulbs, LED trees are very similar to real ones. The alley of luminous trees seems to be calling to a fairy tale, causing delight, surprise and anticipation of a miracle even among adults. If you install a glowing tree in your office or store, it will surely increase the accommodating of customers and the willingness of buyers to make a purchase. Very popular LED trees as christmas decoration apartment, house or garden. They give good mood to everyone who looks at them.
Creating an LED tree at home
Decorative luminous trees are not afraid of frost or heat, they are not afraid of rain, dew, hoarfrost. Even if one or more elements fail, the structure will not stop shining. large area it is better to decorate with a tree several meters high, impressive in size, which includes a huge number of LED bulbs.
Brightness and power of LEDs. The method of fixing the tree at the installation site. A variety of colors and crown shapes of LED trees creates a lot of opportunities to draw attention to the building, territory, interior. If you want to decorate your office for a holiday quickly and in an original way, decorate a garden or attract visitors to a store or entertainment center, the best option than LED trees, do not come up with.
With even minimal knowledge in the field of electronics, you can quickly make a luminous tree with your own hands. At easy way making a do-it-yourself LED tree using a ready-made garland, making a tree by connecting LEDs into a circuit on your own is somewhat more difficult.
Natalia Korpyleva
In the previous entry, you drew attention to the design of the hall to New Year holidays in our kindergarten.
Our friendly team discussed the design in advance and all groups began to prepare for the planned curtain of snow-white snowflakes, 100 snowflakes per group. Soon they were ready.
Senior and middle groups took over the design miraculous snowflake curtain.
We also planned to make two carved multifunctional tree to decorate the hall illuminated from Christmas garlands and cutout patterns.
I took care of this business. For we need to make wood:floor insulation(the thicker the better, as it keeps its shape well, felt-tip pen or a blue marker, a stationery knife or scissors, a bucket or any pot, a piece of thick plastic pipe 1.5 meters, colored tape. transparent tape, Double-sided tape, a little cement and water, white needle and thread, ruler, New Year's garland, wonderful mood and fantasy.
We prepare the trunk in advance tree: wrap the pipe with colored tape, fill the pipe in a bucket with cement diluted in water and leave it to harden for a day.
We draw on insulation for the crown of the future tree by attaching the stem.
Then cut out the second part.
Here's what happened.
We draw beautiful patterns with a marker.
Carefully cut out the patterns with a clerical knife.
Fold and trace the patterns with a marker on the other side.
The cut out parts can also be used to decorate the group.
I cut patterns.
Here's what happened.
We cut out such a detail.
We sew like this.
Attach pieces of double sided tape.
On double-sided tape we glue the part that we will put on the trunk tree. And fix it with transparent tape garland on one side of the crown.
We fix it on adhesive tape and the other half of the crown, sew the two sides on the sides and put it on the trunk.
We decorate the bucket beautifully and that's how carved the tree ended up.
Two carved tree fit perfectly into the interior and complemented new year decoration hall for the holiday.
During the holiday.
I have tree dressed as night.
You probably already noticed that at the very beginning of this post I wrote that tree is a multifunctional decoration for the holidays. Its versatility lies in the fact that the crown tree is removed,turned inside out and one side of the crown will be painted in Orange color(to use tree during autumn holidays and the other side will be painted green color (for use on spring and summer holidays).This is wonderful tree we made it!
Thank you for your attention! I will be very glad if my idea and mine master- The class will be useful to you in your work. Happy New Year to all Maam residents! I wish you creative success!
Related publications:
I bring to your attention a tree according to the seasons. The idea was taken from the Internet. In the hardware store I bought plastic that can be cut.
Dear colleagues, at the beginning of each academic year, the question arises of how to decorate the group. In this I was helped a lot by Maam people, ideas and drawings.
Good day, dear colleagues! Everyone knows how nature changes in autumn. Autumn - the artist paints all the trees and bushes bright.
To create our tree of happiness, you need to prepare a blank. For her, I cut out a heart from ordinary foam plastic, 2 cm thick and put it on.
We need: 2 liter bottle from lemonade, hay, sawdust, twigs, mounting foam - 2 pcs, brown paint, spray SNOW or snowflakes,.
The purpose of the lesson: 1. To promote a good atmosphere in the group and a friendly attitude of children. 2. Formation of cognitive activity.
This creation was inspired by watching the movie Avatar. Remember the fluorescent trees that filled the night with colorful light, an indescribable beauty.
Surely you have seen beaded trees, a man-made creation of an analogue of natural beauty, less affected by time. The advantage of such trees in more " rapid growth”and the ability to set a unique shape, accurately recreating a mental image.
Not so long ago, “eternal flashlights” appeared on the market, in particular, devices with LEDs and solar panels.
We combine the above, and coupled with diligence, we can get a glowing beaded bonsai that looks like this:
In the dark,
at night.
Manufacturing technology
The collection of energy for recharging can be done in one of two ways:
1) Placement of photodiodes in the branches of a tree;
2) Installation of one solar cell next to the tree.
Tree creation.
It all depends on your imagination, skill and diligence. For the above example, it was necessary to purchase about 60 meters of copper wire with a diameter of 0.3 mm and 2160 beads with a diameter of 3 mm. Beads can be any, but in my desire to recreate the effect of leaves, I used transparent green, 80 grams.
The very first stage, we make branches with leaves.
Next, you need to create a strong wire frame with a diameter of about 2 mm, this will be a tree trunk. When placing the LEDs on the branches, leave a margin of length, as shown in the photo. So it will be more convenient for further assembly. You also need a margin at the roots to assemble the circuit.
Mounting the LED on the branch frame:
If you want to use the placement of photodiodes on the branches, then the design will look like this:
I used branches with photo and LEDs and five branches of leaves. To create a natural effect, we place dark photodiodes in the center, and the LED at the beginning of the points with leaves, this will allow them to illuminate the entire branch.
One finished branch:
Wood half finished
Same thing, in the dark:
Now you need to hide the electronic filling, there are many options: solder the roots, thread through the holes, press down, etc. IN this case, holes were made in the bottom of the pot, roots were passed through them, and after placing the electronics, the container was filled with decorative stones.
Pot of pebbles:
The electronic side of the issue
BPW34 photodiodes were used, if you decide to use this direction of providing energy, then you need to use about 10 pieces together to ensure that the lithium-ion battery is charged. We place them in the branches and bring the wires to the roots.
Due to the location "in the foliage" photodiodes cannot work at full power due to the light flux reduced by the leaves.
Consider another solution to the problem of energy supply. Key chains with solar batteries have been sold in stores for a long time, their price is not high.
LED keychain flashlight with solar battery:
At the first stages of the calculation, it was assumed to use a capacitor as the main battery. But when I used solar cell From the key fob, I felt sorry for leaving the remaining parts of the key fob out of work, including a 3.7V and 40 mAh lithium-ion battery. The use of these details made it easier to recreate the circuit.
Scheme:
If you use BPW34 photodiodes, then you need to use blocks of 10 photodiodes connected in series, assembled in parallel.
The solar array is connected via diode D1 and resistor R9, which allows transistor Q1 to act as a dimmer for the LEDs based on light information from the solar cell. Thus, the backlight turns on only in the dark and does not take power during the day, allowing the battery to charge. It remains only to assemble the LEDs and the resistors connected to them in series.
When hiding electronics with stones, leave the solar cell uncovered, otherwise it will not work.
The list of materials required to create:
2160 beads (about 80 g)
60 m of copper wire with a diameter of 0.3 mm
1 bonsai pot
8 super bright green LEDs 3mm 8000mcd
1 a solar panel(or 10 BPW34)
1 Li-ion battery 3.7V 40mAh
2 m copper wire about 2 mm in diameter
8 resistors 1 kΩ
1 resistor 1MΩ
1 diode 1N4148
1 transistor BC327
P.S.:
Such luminous trees will be a great decoration for your windows and interior, bringing a little magic into your life.
