Warm shower in the country projects. Layout and materials for the construction of a country shower with heating. Shower equipment with water supply
We create a warm shower in the country: we find out the technical points
Of course, before you start building, you will have to make blueprints. warm shower in the country with their own hands to calculate all the materials, and in addition, technical capabilities with which you are going to endow this structure.
Indeed, often heated water occurs in such buildings only in hot weather, that is, it heats up naturally, depending on weather conditions, but it can also be forced heating.
Country shower with heating
It is about this forced method of heating water, as well as about the insulation of the architectural structure itself, that we want to tell you, and also bring to your attention in this article.
Warm shower box
How to supply hot water
- The main problem for a separate shower from the house is hot or at least warm water - if this can be arranged in the building from common system, then autonomy is needed here. IN this case most convenient option- it is flowing electric heater, because almost any Vacation home connected to the mains, therefore, the installation of such a device is a minor technical problem, where the safety instructions against electric shock must be observed.
- Let's say right away that this is not any super option - to very high temperature the device does not heat the water, especially if it is cold, but, given the very specifics of a country shower, it will be enough for you and warm water . In most cases, even if the price of the device is high, it will not heat water above 40 ⁰C, but you are unlikely to need more.
- Another option is an underlay. hot water from the house- pipes are laid underground and insulated, but during transportation too much heat loss occurs, and if this does not bother you, then this option is better than the first one.
How to heat a shower
Infrared wall heaters
Of course, in the summer you will not have a question about how to heat the shower stall - it will already be warm or even hot there, but in spring or autumn, when you plant a garden or harvest, in your soul you will most likely feel too chilly. But you can make such a box with heating, and here, infrared heaters are the best suited for heating, and there are good reasons for this.
Firstly, the IR panel will heat up very quickly small room, since there is a special principle of giving off heat calories - the panel will not heat the air, but nearby objects, which will just become a source of heat.
Secondly, such devices can be installed in any place convenient for you - on the floor, on the ceiling and on the wall, and, thirdly, they can be easily turned off and removed. This very “third”, perhaps, is the dominant factor in favor of IR systems - they will not be stolen, since you will have the opportunity to bring them into the house for the winter, or even take them to the city.
Note. Infrared heaters There are not only different capacities, but also different configurations.
That is, it can be a device in the form of a panel, but it can also be a film type - the latest models can be installed under wall and ceiling cladding.
How to keep warm in the country shower
Insulation of the box with foam
So, we need an insulated shower in the country, that is, given that our construction will be quite simple, most likely from boards or OSB, this will not be enough to keep the cold from the street inside. Two materials are best suited as thermal insulation here - mineral wool(glass or stone (basalt), but not slag) and polystyrene (in extreme cases, extruded polystyrene foam, but it is much more expensive).
The process of laying such insulation is actually no different from installation in other rooms - all the same frame and fasteners that are most suitable for the material used.
But there is one very important nuance, which arises in connection with the specifics of the shower box - it is constantly humid there, therefore, the thermal insulation must be protected from water splashes. If you are doing installation from the side of the street, then this question disappears, as it were, by itself, but inside it is extremely important, otherwise you risk getting fungus and mold there.
Foil - excellent waterproofing
So, it is best to cover the insulation with an ordinary thick cellophane film, and then cover this entire structure with foil or any thin foil insulation, as shown in the photo above. Here you immediately, as it were, "kill two birds with one stone" - protect the insulation from moisture penetration and create an infrared reflector.
The fact is that the foil has an excellent property - it reflects infrared rays, therefore, the excess of heat calories in boxing will be minimal.
Note. It is very important that you insulate not only the walls, but also the ceiling, since according to the laws of physics, heated air rises and if there is poor thermal insulation, then warm air fade away very quickly.
The same applies to the waterproofing of the ceiling - the steam, rising up, will be reflected by the foil insulation.
Plumbing nuances
Since we are insulating the shower box on the street, it is quite natural that we will not make a drain (lattice) floor there, since cold air will flow from below and all heating will be useless. In such cases, of course, it is best to fill the floor concrete screed with insulation, which is most often used as an expanded clay pillow laid on a layer of sand.
That is, the screed is poured here according to all the rules - the soil is planned, then a waterproofing film is laid with a twist on the walls, then a layer of sand 2-3 cm is poured and after that - an expanded clay cushion, the thickness of which depends on the coldness of the soil, but not less than 4-5 cm.
Do not think that we made a reservation about the waterproofing of the shower floor - the film is needed here not so that water does not get into the soil, but so that the pillow is dry - thereby reducing the thermal conductivity of materials.
You will need to mount a drain on the floor and take it to public sewerage, into a septic tank, or dig nearby cesspool, only it should be used exclusively for soapy water. But still, the best option there will be a septic tank - you will not only not pollute the soil, but also will not breed unpleasant odors, which exudes stagnant water.
Conclusion
You understand that building a wooden box is easy enough, but how to make it so that you can wash in it during the cold season is a completely different question. So such a seemingly insignificant building in this case will turn out to be a capital object, but if you bring water underground, you can wash there at any time of the year.
http://hydroguru.com
How nice it is to escape from the stuffy metropolis and find yourself in your dacha! Fragrant greenery, birds singing and friendly sun - it's wonderful. But, if there is no summer shower on your site, hot days will turn from relaxation into torture. But it’s not at all difficult to build a garden shower for a heated cottage with your own hands. It is only necessary to approach this process in detail.
Choosing a place for a shower in the country
Before starting construction summer shower, it is necessary to determine exactly where it will be located. Basic selection rules:
- Locate the shower stall in a sunny location. It is desirable to find an area where the sun penetrates throughout the day. Then you can rinse with refreshing water at any time.
- The shower stall should be on a hill for the best outflow of water. Showering will use a lot of water. Stagnation of water under the booth is fraught with erosion of the soil and, as a result, loss of stability of the structure. Also, stagnant water will lead to unpleasant odors.
- Lack of drafts and visibility. Despite the fact that the wind is warm in summer, the presence of airflow can bring you a lot of trouble. And the location of the shower in the most prominent place is not desirable from an aesthetic point of view.
Organization of draining warm water
The best solution is to connect the drain to the gutter. If it is missing, dig a hole not far from the shower stall. Use a hose or pipe to connect drainer with a hole.
The platform for the summer shower should be tilted towards the drain pit.
In this case, the used water will flow freely along the inclined pipe.
Equip the bottom of the shower cabin with a tray or make a container for draining water yourself. To do this, fill the area with concrete of the size you need. Place bricks around the perimeter that will serve as a side. 
The shower drain cover must be provided with a waterproof cover. The following materials are suitable for this:
- ruberoid,
- hydrostekloizol,
- concrete with the addition of PVA,
- PVC film.
It is a mistake to use clay for drainage. Such flooring will wash out with water over time.
Shower cabin and dressing room
Designing a cabin for a country shower
The width and depth of the shower cabin must be at least 1 * 1 m, and the height of 2 m and above. The space inside the finished structure should be enough to turn around, raise your arms and bend over without obstacles.
It should also be noted that in the booth there should be a place for a dressing room where water will not penetrate. For the locker room, it will be enough to allocate 60 cm. Thus, optimal size the shower will be 1.6 m * 1 m. The material for the frame can be wooden beam. The standard diameter of the racks for such a structure is 100 * 100 mm.
Various methods can be used to give stability:
- Concrete every part of the frame;
- Attach the lower corners of the structure to pegs driven deep into the ground.
When designing a shower stall, consider the design of the buildings in your yard. The shower room should not stand out from the general style.
Installation or how to do it yourself
Cut the timber to the length you need. Connect the side parts of the frame in the form of frames. Reinforce each frame in the middle with jumpers from distortions. Jumpers are made from the same beam and should be installed at an angle of 45 degrees.
If you decide to make a shower cubicle with a size of 1.6 * 1 m, then the side parts will be 1 m, the back - 1.6 m, and the front 1 m, since in the front part it is necessary to leave a space for the door equal to 60 cm. For for a convenient passage to the shower room, it is not recommended to make a door less than 60 cm. Then you should connect the frames.
Before fastening the frames together, make sure that their diagonals match.
Having fastened the frames, reinforce them with jumpers at the top and bottom. Thus, you will get a solid frame, which can be closed with polycarbonate or any suitable material. It will be interesting to know that along with a shower, you can also build a toilet, as well as a utility block, but how to do it correctly will help you understand the contents of this
Install the resulting structure over the prepared inclined platform for water drainage. Use a spirit level to level the shower frame horizontally and vertically.
Stuff the slats on the bottom jumper. Leave a distance between them so that the water drains freely down onto an inclined platform.
For the shower door, make a frame in the same way: assemble a frame from 4 planks of timber and reinforce them with jumpers crosswise to protect the door from distortions. The size of the frame should be approximately 1 cm smaller than the opening for the doors to open freely.
- slate,
- lining,
- moisture resistant OSB,
- cellophane,
- plastic,
- glass.
Please note that any of the materials listed must be opaque.
After choosing the base, cut out the walls right size and install them on the frame frames. The top and bottom of the booth do not need to be closed completely for good ventilation. The door must be cut separately. Install the doors on the hinges and sheathe the door with cellophane so that water does not get on the timber. But, so that it would not be expensive and very simple, it is indicated in the article.
Capacity: tank, barrel or water tank
The minimum volume of the water tank should be 100 liters, the maximum - 500 liters. Installed on support posts above the shower.
Please note that the material from which the outdoor shower tank is made must not be subject to corrosion. 
The best option would be plastic or stainless steel. If you chose the plastic option, you need to not only install it on supports, but also tie it to them. Since in the event of strong gusts of wind, an empty container may fall.
It is best to purchase a flat tank with a fitting thread for screwing in a tap. If this is not found, make a hole for the faucet yourself.
In a plastic barrel, a slot is made using a drill with a pen drill. If the water tank is metal, use a metal crown. Having cut the tap into the tank, install a water diffuser on it.
It is good if your container is equipped with a lid, thanks to which the water will not clog. The cover can be made of metal, plastic, glass or cellophane.
Water supply to the tank can be carried out manually or using a pump. The latter option is preferable.
Sources of water heating in the summer shower
The water in the garden shower can be heated in various ways.
Firewood
To increase the temperature of the water in the summer shower with firewood, install a stove next to the cabin. On its surface, place an expansion tank that will push hot water into the main shower tank. The principle of the expansion tank is the constant circulation of water.
Hot water from the heating system will go up, cold water from the tank above the shower will go down. The connection between the expansion tank and the main tank will be a metal pipe.
With a wood-burning heating system, you need to use a metal container for water, not a plastic one.
Electricity
Install a boiler or heating element with a power of 2 kW or more in the water tank. If you use a heating element to heat water, it must be inserted into the bottom of the water tank. The boiler is lowered into the tank from above. But be sure to monitor the water level during the heating process. Otherwise, your appliances may burn out.
To not happen short circuit, the wire stretched from the outlet to the shower must be one-piece. 
A thermometer should be installed on the water tank, which will indicate when the heating devices can be turned off. Or purchase a tank with automatic heating, where there is control not only of the temperature, but also of the water level.
A good option for a summer shower with electric heating 2 tanks will be used at once: a large one for cold, a small one for hot water. In this case, each family member will be able to choose for himself comfortable temperature. For mixing hot and cold water get a mixer.
As in the case of heating with wood, plastic tank not recommended for use with heaters.
Sun
The most economical and hassle-free heating option - Sun rays.
In this case, your shower stall should be in a place that the sun heats up all day. If this was not found, decide at what time it will be more comfortable for you to use the shower.
It is more convenient to rinse in the midday heat - which means that the shower stall should be in the place where the rays penetrate in the morning; If you prefer an evening shower, choose an area that receives the sun during the day so that the water has time to warm up.
How to enhance the effect of heating by sunlight?
- Paint the water tank black. The sun's rays warm up dark colors the most.
- Wrap the shady side of the tank with foil, as this material will keep the heat inside the tank.
- Using an additional frame, stretch a plastic film over the open tank, which will create a greenhouse effect.
Conclusion
After the final installation of the summer shower, you can create a certain style by adding a few details to it. Plant moisture-loving plants around the booth, which will not only please the eye, but also contribute to accelerated drainage. Decorate your shower room with decorative elements to turn an ordinary booth into a bright accent of your garden plot.
Most summer residents think about creating a shower in the country with their own hands.
Firstly, it is an opportunity to improve comfortable conditions without high costs.
Secondly, a properly equipped outdoor garden shower allows you to meet the necessary sanitary needs, as it is suitable for use at any time of the year.
And besides, crafts for decorating it make any garden area exclusive.
Design features
If the shower will be used exclusively in the summer, then a simple quick-mounted structure, such as a shower rack, a camp shower or a toptun, is sufficient.
You can install a simple camping summer shower with your own hands in a fairly short time.
If long-term operation is planned, including in the cold season, then it is necessary that the design of the shower-craft is reliable and provides for the possibility of installing equipment for heating not only water, but also air in the cabin.
It is more difficult to install a winter shower in the country with your own hands, since its design needs a frame and a foundation.
Regardless of the modification, the country version of the design provides for the following equipment:
- base or foundation;
- drain ladder or drain;
- pallet and floor;
- cabin;
- holder-diffuser and stop valves;
- pipeline;
- devices for pumping and heating water, as well as for heating the cab.
As a material for such crafts as a country shower room without a foundation, film or plastic is used.
For booths installed on the foundation, it is preferable to choose more durable materials - wood or brick. A good option is a do-it-yourself polycarbonate shower.
The most famous modifications of the shower craft used in summer cottages:
- Toptun - mat with pump and hose. The water supply is provided by pressing the feet on the mat;
- Camping - a compact portable plastic container equipped with a hose and nozzle. It can be stationary, mobile;
- Circular. The circular option provides water supply from all sides;
- Alekseev. Provides hydromassage by supplying water under high pressure;
- Tropical. The flow of water entering through a special grate looks like a tropical downpour.
Making a circular shower with your own hands is quite difficult, but the result of this work will please any summer resident.
Toptun - the most popular shower among summer residents
Simple designs-crafts of shower devices intended for summer operation are considered the best solution to the issue of country hygiene.
After all, installing the same circular or tropical shower is not as easy as it might seem at first glance. That is why, choosing which shower to make in the country with their own hands, summer residents most often stop at a trample.
To build a toptun shower with your own hands, you will need a car pump, two corrugated hoses, a container with a lid, and a shower head. You don't even need a holder.
The sequence of operation of the toptun:
- Water of the required temperature is drawn into the container. Considering that the volume of the container is small, a do-it-yourself shower tray, if it is a toptun, is not needed;
- Crafts are attached to the lid - a wooden or rubber cork equipped with holes and tubes, the diameter of which corresponds to the diameter of the hoses;
- The container is covered with a lid with attached hoses - one from a car pump, the second - a shower head holder. Under the pressure of air from the pump, water enters the hose. The watering can is held in the hand or attached to any surface.
By the same principle, you can make a camping summer shower. To do this, you will need a rubber mat or pedals equipped with built-in valves, as well as two hoses.
As a container for water, an ordinary bucket is used, covered with a lid, in the hole of which the inlet hose-holder of the watering can is fixed.
As in the first option, the pallet is not required, and the earth replaces the drain drain.
The water supply to the hiking version is carried out by alternately pressing the pedals with your feet.
Each step provides one serving of water. As a rule, the marching method saves water and is used in conditions with limited access to water resources.
Also, a camping outdoor shower can be used to wash a car.
A circular shower can be considered as another option for a country house, but in this case, the actions listed above will not be enough. You will need a special holder for it.
How to expand functionality?
The functional purpose of a shower room, even in summer cottages, should not be limited solely to hygienic considerations.
For many summer residents - this is an important part of the suburban area.
But not everyone knows that a do-it-yourself country tropical shower in a bath can fully replace many of the procedures offered by spa salons.
In practice, the available functionality of the shower room is the result of the choice of its type.
That is, in order for the built country shower in the bath to live up to expectations, you need to learn more about its functionality and installation steps.
In the minds of most people, a bathhouse is associated with a healthy lifestyle, and visiting it is considered a preventive measure.
Therefore, the famous shower of Alekseev will come in handy in the bath.
Alekseev's shower is a new generation design, an analogue of the well-known Charcot's shower with hydromassage properties.
But Alekseev's shower, an invention of the Russian doctor of the same name, is equipped differently and has no analogues in the world in terms of the effectiveness of the impact.
The use of a device created according to the Alekseev method provides healing through massage and is recommended for many diseases.
To independently install Alekseev's shower in the bath, you need to understand how it works.
The unique difference of the device is the high-speed streams formed using the special design of the holes in the nozzle for the watering can.
If you make such a nozzle yourself, then installing Alekseev's device in your own bath is not difficult.
To do this, it is necessary to drill cone-shaped holes in the nozzle for the watering can - wide on the side of the water flow and tapering towards the outlet.
Then the craft nozzles are installed on the holder. The holder must be chosen carefully.
Considering that Alekseev's device gives a strong flow of water, care must be taken that the ladder ensures its full drain, or use a pallet.
At the same time, Alekseev's shower can be operated not only in a summer cottage, but also in an apartment.
Features of self-installation of various types
The functions of the device used in summer cottages can be expanded if you use the non-standard capabilities of its structural varieties.
For example, a circular shower, along with hygiene, will also provide a healing effect.
According to the principle of the device, the circular type of shower is a few systemically located pipes equipped with small holes and a faucet.
In the center is a holder with the main watering can. With the help of a tap, the water supply pressure is regulated.
Thus, the circular shower additionally provides a comprehensive hydromassage of the body.
You can install such a device yourself both in the country and in the apartment.
To create an original shower craft, it is necessary to connect several pipes equipped with small holes in series with the central riser, on which the mixer holder is located.
In shape, the circular type of shower resembles the back of a chair with transverse or longitudinal crossbars.
Then you should take care of the flow of water - the ladder will cope with this task. The owner of the cottage has the right to decide whether he needs a pallet in this case, or a ladder will do just fine.
An excellent alternative to a regular shower can be a rain shower. This is a device whose water flows mimic a tropical downpour.
Functionally, the tropical shower type is a hydromassage device.
However, not every apartment has the opportunity to install a rain shower, but if such a design is installed in the garden, the impression of authenticity will be complete.
It is not difficult to build a rain shower in the country on your own. To do this, it is enough to increase the area of \u200b\u200bthe watering can of the mixer and strengthen its holder.
A ladder will help control the discharge of a powerful stream of water, which distinguishes a rain shower. It is also convenient to use a deep pan.
But you need to remember that both the holder, and the ladder, and the watering can must be of high quality.
Construction stages
To build a summer shower with your own hands, you need to know the basic rules of the process:
- Preparation - determine the dimensions and draw a diagram;
- Choice of location - a sunny place on a hill, which is not too far from the house and the water supply, but with the possibility of arranging a drainage system if a ladder is provided in the shower equipment, or a drain pit if a pallet is installed;
- Construction of the foundation - level the site equal to the size of the building, then fill it with concrete;
- Installation of the frame - piles are installed and fixed at the corners of the site, then they are tied up, constructing the shower floor. The racks of the frame are fixed with self-tapping screws. Build walls and roof;
- Summing up communications - installation of a tank, equipment for draining, lighting and ventilation;
- Mount pipes and a pallet - it is necessary to drain water. Sometimes they do not use a pallet, but a floor in which a large ladder is mounted. The best option for a drain system is a ladder with a lock and a grate. The shower drain performs the function of a sewer, but may have a different throughput;
- Waterproofing, wall cladding. For operation in the cold season, the walls need to be insulated;
- Decorative shower cubicle. Beautiful crafts increase the aesthetic appeal of the entire suburban area.
If the weight of the structure is small, then a foundation is not required for its installation. For example, a metal frame for a polycarbonate booth is installed on fittings driven into the ground.
In addition, it is physically easier to build a do-it-yourself polycarbonate shower than a brick one.
A properly built base will allow you to upgrade your shower room in the future and enjoy its new possibilities endlessly.
If it is not possible to conduct hot water to a private house or country house, then in this case it would be advisable to build an outdoor shower.
How to build a summer shower with your own hands from wood?
To build a wooden shower in the country with your own hands, you can follow the following instructions:
First you need to choose appropriate place for building a building. When choosing, it should be borne in mind that such a country shower will be constantly exposed to moisture both inside and outside.
Tip: it is better to build such a structure in a well-ventilated area. This is necessary so that the wood dries faster. Also, do not plant bushes, trees and tall plants near the shower, as they retain moisture, do not allow air to circulate, and as a result, prevent the wood from which the country shower is made from drying out.
Production earthworks. For a shower, we dig a hole 1x1 m in size, 40 cm deep. We lay a layer of rubble on the bottom of the pit, which will help the soapy water soak into the soil faster. Next, cinder blocks should be laid out in the corners. They must be leveled.
Next, we proceed to frame manufacturing. To do this, we take boards whose thickness is 30 mm and a width of 15 cm. A base measuring 1x1 m will be made from them. 4 beams with a section of 70x100 mm are attached to this base. For dressing the frame, side and two transverse jumpers are used, which are inserted into the grooves. They also serve as a reinforcement for the roof, on which a hundred-liter tank will be installed.
Works on frame sheathing. For these purposes, you can use lining, blockhouse or false timber. The gaps between the grooves should be two to three millimeters. This is necessary so that the timber can expand freely when regularly wet. In our case, a material imitating logs was used for shower cladding.
do-it-yourself shower for giving step by step instructions. Photo
Finishing work. Before painting, it is necessary to prime the wood. For these purposes, a bioprotective antifungal impregnation is suitable, after drying of which the surface is painted with at least 3 layers of facade acrylic water-borne varnish.
The next stage in the construction of a soul in the country is tank installation for water.
building a shower in the country. Photo
Tip: for a summer shower, it is advisable to use a tank with a minimum volume of one hundred liters.
You can build such a wooden shower in the country with your own hands in one or two days.
building a shower in the country with your own hands. Video
Do-it-yourself summer shower
For the construction, it is necessary to prepare the following materials:
- timber;
- fasteners (self-tapping screws);
- shower kit, which includes a bracket, a mixer, a curved pipe, an adapter and a nozzle;
- rubber hose.
How to build a summer shower in the country with your own hands?
Construction order:
Drafting drawings. For such a structure, it will be necessary to make a wooden pallet in the shape of a circle from dense wood. As a template, we will have cardboard of the required size. First you need to lay the cardboard on a flat surface and fix it with tape. Next, using measuring devices, draw a circle with two squares located inside. According to this template, the construction of a wooden floor will be carried out.
do-it-yourself summer shower drawings
Construction pallet. The floor will be three-layer. The order of the base for the floor is as follows:
Works on pipe installation. Connect all the elements that are in the shower set.
do-it-yourself summer shower step by step instructions. Video
do-it-yourself summer shower step by step instructions. Video instruction
Summer shower for giving from pipes and polycarbonate
This option attracts with its low cost, resistance of materials to the action of sunlight and moisture, as well as ease of processing.
The procedure for the construction of the foundation and floor
Before you start building a polycarbonate outdoor shower, you need to decide on its location. For such a structure, an inconspicuous place with a flat surface, away from wells and wells, is suitable.
Site preparation. To do this, we fill it with sand and ram it.
Drill or dig four holes into which posts for the foundation will be inserted.
Lay a layer at the bottom of the hole rubble 10-12 cm thick.
Install pipes made of plastic, used for laying sewers. We make them inside and out.
do-it-yourself summer shower step by step instructions. Photo
In the central part it is necessary to dig drainage pit and fill it with rubble.
We also cover the area around the blind area with rubble.
From a bar with a section of 100x150 mm we make base for the construction and attach it to the foundation posts. For these purposes, it is necessary to drill holes in the cement and insert plugs into them.
It is also necessary to fasten jumpers to the frame with self-tapping screws and reinforce the structure with steel corners. Between the pipe and the beam we lay waterproofing.
Tip: before installing the jumpers, you need to try on the pallet, as it will subsequently be installed between them. Therefore, if necessary, it will be necessary to adjust the frame to the dimensions of the pallet.
Next, you need to remove the floor height from the timber 50x50 along the entire perimeter and after that you can proceed to the device floor covering. The result should be a base with a built-in pallet.
The order of the construction of walls and roofs
Let's start building wood frame shower. At this stage, it is necessary to provide a doorway. In our case, the height of the walls will be 2.5 meters.
summer shower made of polycarbonate step by step instructions. Photo
A solid one is attached to the rafters crate.
Making a layer waterproofing from roofing felt or bikrost.
From the sides we produce sheathing finished board.
For coverage roofing use soft tiles.
After that, we process the entire wooden frame wood stain two coats, and then varnish in two or three coats. For such a structure as a half-carbonate summer shower, about 7.5 liters of stain will be needed.
Frame cladding polycarbonate from the outside. For these purposes, it is recommended to use special thermal washers, for which it is necessary to cut holes on polycarbonate using a cutter.
Door made in the form of a wooden frame. Its height is two meters. To give rigidity, jumpers and jibs are used. Next, the door frame is painted, hung on hinges and lined with polycarbonate.
After that hang water heating ba k, faucets, curtains, hooks, rugs and other accessories.
At the bottom of the pallet it is necessary to bring the drain into drainage pipe, inserted 20-30 cm into the crushed stone base.
At the final stage we produce entrance improvement in the country shower. To do this, we dig a hole, fill the foundation with concrete and lay reinforcement in it. After the concrete has gained strength, we lay bricks on it, on which steps made of wood will be installed. You can decorate if you want. To do this, you need cement and stones.
Attach steps.
Do-it-yourself shower for giving
The first thing to do before starting construction is to decide on location summer soul. For such a structure, a well-lit, calm, slightly elevated place is suitable.
Tip: it is desirable that the shower is not located too close to the buildings and is built in the same style as them.
Stages of building a soul in the country
Drafting project. It is planned to build a shower consisting of two small rooms. The minimum size of the bathing compartment should be 100x100 cm, changing rooms - 60x100 cm. In our case, the optimal shower size is 200x150 cm.
At the chosen site mark out the rectangle dimensions 140x190 cm. We drive pipes in the corners. The foundation for the shower will be piled from two-meter asbestos-cement pipes, the diameter of which is 90-100 mm. They must be buried in dug pits to a depth of about 1.5 m. 20-30 cm should remain above the ground. After that, drainage and a drain system are arranged.
Summer shower project. Photo
To organize the flow of water is done waterproof layer. It can be made from a PVC film or roofing felt, which must be laid on an inclined surface. Alternatively, a reinforced concrete screed can be made.
Making the top and bottom strapping frame.
Plank floor covering.
Tip: In order for water to flow out of the shower cabin, it is recommended to install floorboards with gaps that are 10 mm wide.
The shower room should be separated from the dressing room by a high threshold and curtain.
Finishing work. Outside, the country shower is sheathed with clapboard or siding, moisture-resistant plywood, fiberboard, etc. Inside, for finishing, materials that are not afraid of moisture should also be used.
It is necessary to install a water tank on the roof, the water heater is installed indoors.
Hozblok with a do-it-yourself shower
The order of construction of the structure:
After a suitable place has been chosen for the construction of a shower, you can proceed to earthworks: dig foundation pit, fill it with PGS and lay out point brick foundation.
After the foundation is ready, you can proceed to the device wooden frame designs. For these purposes, a beam is used.
For plating shower on the sides and back in this project, a board with a thickness of 10 mm was used. A window and door opening should be provided in front.
Device roof frame from a wooden beam. In this project, window openings should be provided on the folding roof.
Corners should be lined with boards.
Can be used for roofing shingles.
The door is made from boards. Handles for doors and steps can also be sawn out of wood.
All wooden elements are necessary paint paint or varnish.
Arranging benches, installing a shower tray, cladding walls with plastic, attaching hooks, etc.
Summer shower projects for a summer residence
Project No. 1
For the shower, you can also use not only a wooden frame, but also a metal one. This design can be installed directly on the ground. A curtain is used as a door in this project.
Project No. 2
The shower can be made from a corrugated metal sheet that can be bent into a semicircle. For this option, there is no need to install a water heater. It will be enough to connect to the water supply.
Project No. 3
Such a summer shower made of pipes is lined with white plastic on the outside, and brown on the inside. The shower cubicle can be erected on a paved concrete platform. For this option, you will need a water heater.
Project No. 4
As a floor in such a shower, you can use a wooden flooring. Inside the room is lined with blue plastic. Instead of a roof, a wooden lattice is used.
Project No. 5
The base of this shower is made of metal pipes. Brown corrugated board was used for wall cladding. The roof is also made of corrugated board. Light enters the shower room through the holes between the wall and the roof.
Project No. 6
For the manufacture of this shower, red polycarbonate was used. For this option, there is no need to install a tank on the roof. To use such a shower, you will need to connect it to the water supply.
Project No. 7
The frame of such a shower is made of metal pipes painted blue. White plastic was used for wall cladding. A metal structure was made for the tank.
Example #8
Rustic shower. The frame is made from dry tree trunks. Branches are used for cladding. Logs are fixed on top of the structure, on which a water tank is installed.
Project No. 9
The frame for such a shower is made of metal elements. Floor and wall cladding - varnished wood. Such a summer shower does not have a door and a water tank.
It is difficult to imagine modern life in the country without the usual comfort. A heated country shower will help maintain the desired level of hygiene and comfort for those who love countryside holidays or work on weekends in the country. A simple shower already greatly increases the level of comfort for the backyard. In order to maximize the level of comfort, a summer shower with heated water will help, it can be used in any weather, thanks to insulation and a fenced-off changing room.
There are quite a few methods to equip country shower cabins with heated water on your site, properly equipping it, starting from a custom design and its turnkey installation at a specialized enterprise and ending with the purchase of individual units and the independent implementation of all work from a sketch and marking to installation towel holders and soap dishes.
Methods for forced heating of water in the shower
If someone is quite satisfied with the average temperature of the water, so as not to catch a cold when using a regular garden shower, then for some it is fundamentally important to have a warm shower with the ability to adjust the heating temperature. Based on this, it is necessary to consider all common summer and all-season models with their pros and cons in order to make it easier to choose the best option.
- Titanium. A country shower equipped with forced heating can be equipped with wood or coal titanium. This method allows you to get hot water, regardless of weather conditions. To increase efficiency, it is necessary to mount an expander that will help ensure the circulation of water - the cold one will go down to the heat exchanger, while the warm one will go up to the tank.
The category of especially dangerous equipment includes equipment whose work is directly related to open fire, and if you do not have the necessary experience, it is better not to try to make a country shower with your own hands with heating based on a boiler, titanium or stove. The best solution in this case would be to buy a ready-made design with the appropriate certificates and a quality guarantee. But even in this case, there are serious drawbacks that relate to security.
In order to avoid fire, it will be necessary to install asbestos or thermal insulation protection. In order to mount titanium inside the shower cabin, you will need to carefully choose the material that will be used to construct the walls, floor and ceiling. If a decision is made on external placement, then it is necessary to take care of the titanium or furnace fencing to prevent children from approaching them.
- Electric heating. One of the most convenient methods of heating is electricity, of course, if all the necessary safety measures are observed during the assembly of the structure. The disadvantages of such heating include a serious load on the network, which comes from heating elements or a conventional kilowatt boiler (this option can be used with a limited budget). When designing a country shower with a similar heating method, it is necessary to optimize the power grid in advance to obtain warm water.
Important: any electrical equipment (whether lighting or heating) is essential to install, in accordance with the requirements of safety rules: all cables, switches and sockets must be waterproof, and in addition, they must be equipped with reliable grounding for better protection.
- Solar panels. The arrangement of a country shower with heating using a vacuum solar collector is quite expensive. Panels with vacuum pipes are accumulative water heaters. The principle of their work is the use of ultraviolet radiation from the sun, and not its heat to generate thermal energy. Equipment for such a shower can be bought, but also if you have special knowledge and skills, then you can make such a heated tank with your own hands.
Proper operation directly depends on the selection (it is necessary to take into account the load recommended by the manufacturer) and the quality of the equipment itself, capable of heating water. Based on these data, it is worth concluding that it is not worth saving on the purchase of equipment, as it may turn out that the money was spent in vain.
Preparing a place on the site for installing a shower
The choice of location plays a major role not only during the installation of a shower with solar water heating, but also for other types of showers. If you install a country shower in an open sunny place, this will allow the shower stall to dry faster, and if you also make an open riser (such as, for example, a drainage ditch), this will avoid the “eternal puddle” even during frequent use of the cabin.
Before starting work, you must also decide on the method of drainage - this detail can have a significant impact on the entire structure, for this it is necessary to foresee everything during the design, so as not to correct the finished structure later.
The most popular types of drainage in a country shower, perhaps, include the following:
- the simplest is a direct drain to the ground or into a ditch through a drainage hole or cracks in the floor;
- using a pipeline through a pallet or a drainage hole in the floor and transporting them to the sewer;
- use of a septic tank.
Based on these dirty water removal methods, based on the availability of materials, conditions and budget, a huge number of options can be created.
The project is the most important part of the construction of a shower house
Before you start building even the simplest cabin or shower for a polycarbonate cottage with a dressing room, you need to think over a project that will avoid serious mistakes. It is not difficult to do this, the main thing is to think over the end result and build on this topic.
The total height of the structure should not be more than 3 meters, since a person should be able to freely raise his hands up. You also need to remember about space. While in the shower, movement should not be restricted.
During the construction of the soul, you must follow the following characteristics:
- booth dimensions should not be less than 1 × 1 m;
- you need to remember that you will need to allocate space for clothing.
During the construction of a warm shower in the country with your own hands, you need to take into account a small area that can lead to the destruction of the entire structure. To strengthen the structure, you can erect a pile foundation, this will make it more reliable and durable.
Pile foundations are quite popular in construction due to their good reputation. The modern pile foundation is quite in demand, since its price is much less than that of its "brothers", and in terms of quality it is in no way inferior to them.
In order to build this foundation, it is necessary to use pipes whose diameter is 100 mm. For them, holes are drilled in the ground of such a depth that the pipes protrude 15-30 cm above the ground.
How to install a heated shower in the country?
The work on the erection of a country summer shower consists of the following stages:
- Making a foundation (if the foundation is piled, it will be necessary to drill holes for it in the ground, for a filler, dig a small pit).
- Installation of the frame (horizontal and vertical racks) and the upper ceiling for mounting the tank.
- Hanging on one of the vertical supports of the door.
- The frame must be sheathed with the selected material, which will play the role of walls.
- If there is such a need, it is possible to perform thermal insulation of the entire structure and install a roof over the tank space (only necessary if there is forced heating).
- Installation of the tank and heating equipment, reflectors, protective film (it all depends on which type of heating was chosen).
- Hanging hooks, shelves and hangers.
In cases with ready-made options, it is worth mentioning a plastic country shower with a water heater.
Recommendations for choosing a ready-made country shower with heating
Before purchasing a tank for a country shower with heating, it is necessary to study what requirements are imposed on it:
- profitability - low cost, but also the corresponding quality;
- environmental friendliness - the materials used to make a heated country shower should not harm human health;
- fire safety - is a mandatory requirement, if the shower is heated by electricity, all contacts and connections must be of high quality and reliable, taking into account fire safety standards;
- comfort - being in the shower should not cause inconvenience, and the dimensions should be comfortable for swimming;
- modernity - this requirement is imposed on the design of the purchased, as it must fit into the overall picture.
When choosing a purchased shower, it is necessary to be guided by the volume and shape of the tank, the choice of which is characterized by personal preferences. There are models both with booths and without them. It is possible to install various add-ons, such as automatic heating and draining of water, various hygienic devices and additional nozzles.
Additional options for a purchased country shower with heating include:
- indicator responsible for the level of filling the tank with water;
- shutdown timers and heating devices;
- devices for filling and draining water;
- thermostats.
The heaters can be located at the lower, central and middle levels.
There are pedal options and showers equipped with separate changing rooms, their difference lies in the price, the latter are more expensive, but also more comfortable.
Convenience during installation is another requirement for a heated shower, and since the shower is purchased, installation and connection should take a maximum of three hours.
The shower cabin should have a window or mesh elements through which light and air can penetrate, killing mold and fungus.
In the event that the country shower provides for the installation of electrical wiring, it is necessary to remember the elementary safety rules when carrying out electrical work. The shower is a place with high humidity, so you need to take into account all the nuances:
- In order to make it more convenient to use the shower, it is recommended to replace the iron pallet with plastic ladders. Their advantage is that - the air circulates well and the water does not stagnate.
- Thermal insulation is one of the main requirements for the normal operation of a shower with thermal insulation. For such purposes, polystyrene foam is most often used. This material is great for places with high humidity and at the same time it is quite easy to install. To achieve tightness, the womb is covered with an additional dense film. A room with this type of thermal insulation will be quite warm and comfortable. For year-round operation of the shower, the entire structure must be insulated.
- The most common mistake when installing a heated shower is installing a leaky door and thick walls. As a result, due to poor ventilation, various fungi and mold begin to spread.
- To prevent electric shock, the operation of the shower while the heating element is on is strictly prohibited.
- Careful monitoring and maintenance of the correct water level will help prolong the life of the heater. Turning on the heater without water can cause it to simply explode. Repair of this type of product is not provided.
In order to create comfort while bathing in a country shower, water heating is essential. And warm water in the shower is truly a real treasure for avid lovers of countryside holidays and summer residents.
