≡× MENU

• Repair
• Repair
• Interior Design
• About everything
• About plumbing

How to get rid of the smell of dampness in the apartment once and for all. How to remove the unpleasant smell of dampness from clothes

Probably everyone in his life met with mold. And few people attach to this thing great importance. But it would be worth it ... After all, mold fungi are carriers of dangerous diseases. Moreover, it is not so easy to get rid of the fungus in the house, but all because the mold develops very quickly and is easily fixed on any surfaces. And her smell is a nuisance.

So what to do about the smell of mold? I must say that it is not possible to get rid of the smell without eliminating the very cause. Therefore, we will talk about the elimination of the fungus, and the smell will pass with time.

Signs of mold

Detecting the presence of mold in the apartment is not difficult. This can be done, even if the mold itself is not yet visible, by the characteristic smell of dampness, which exude fungal spores from the very moment they appear.

Mold fungi can settle in the most different places The main thing is that they have the conditions for growth. Most often, the appearance of mold and its smell is observed in products, and it is not necessary that they be spoiled. But mold can also grow on walls, ceilings, and even clothing.

Effects of dampness and mold

Apart from bad smell fungi with their spores can seriously harm the body, especially for children. And don't be fooled into thinking that mold is healthy because it's used to make medicine or eat it in certain foods. All this is specially grown mold, and the one that is in your apartment is a thing that will not bring you happiness in life.

Causes of dampness

Now let's talk about where this annoying muck comes from. Mold develops from dampness, which means that it is necessary to deal with it.

Dampness appears in old houses, places with poor ventilation, humidity and heat. All this is a sign of the imminent appearance of rot and mold.

Possible locations for mold growth:

• Ceiling and walls in the bathroom;
• Corners and surfaces of the outer wall;
• In places close to the ground or plumbing;
• Ceilings and walls in the kitchen;
• Any other place with high humidity.

Ways to eliminate mold and its smell in the house

Before removing mold from the house, you need to deal with dampness. But first you need to find out the reason why it appeared.

If dampness appears in a newly built house, then: either the house has not dried up yet, or some points were not taken into account during the construction. Therefore, before building a house, you need to carefully consider all the points, including correctly arranging ventilation.

If dampness appears in an old house, then either the ventilation is broken, or the house is simply living out its last time. Then a complete restructuring or repair of the building is required.

With poor ventilation, it may be necessary to completely or partially replace equipment, or even completely revise the system in the house.

It must be remembered that not all situations can be corrected. And sometimes you have to completely change the housing, because it is no longer possible to remove the mold. Therefore, it is necessary to fight mold and dampness from the first days of its appearance.

Home mold removal products

Sometimes, especially severe cases Of course, you have to call the master to eliminate mold, but for the most part, you can deal with it yourself using conventional means.

Namely:

• Bleach;
• Vinegar;
• Baking soda;
• Hydrogen peroxide;
• Ammonia.

Bleach (chlorine)

The most powerful tool available. However, it is also quite dangerous for humans, so it must be used with caution.

To do this, you need to prepare an aqueous solution with bleach in a ratio of water to bleach 1:10. Carry out cleaning strictly in a respirator and rubber gloves!

Vinegar

The next tool is table vinegar. It should also be used with caution. It does not need to be diluted with water, just spray on places with mold and wipe it with a damp cloth after a couple of hours. All this will need to be repeated in a couple of days.

Baking soda

By using baking soda You can also get rid of mold. Moreover, it does not pose a danger to humans. Therefore, you just need to apply a strong solution of soda to places with mold. Do not rinse with water.

Hydrogen peroxide

It can also perfectly eliminate mold with its antiseptic properties. However, it is only suitable for white surfaces, due to the bleaching effect. Just like soda, it is rubbed onto the surface as is and is not washed off. By the way, you don't need to dilute it.

Ammonia

For good result ammonia needs to be applied several times. The solution is prepared with water in a ratio of 1:1 and applied to mold spots, washed off after several hours.

It is important to know that the ammonia solution must not be mixed with other products, as a chemical reaction can easily be caused.

Conclusion

Everything is ready, the mold is removed. To protect against mold in the future, it is necessary to constantly ventilate the room, and after washing, things must be dried to the end and do not forget about them. Keep the walls in the toilet and bathroom dry and prevent them from getting wet for a long time.

You can use auxiliary things such as an air ionizer or a dehumidifier. Also a good remedy to get rid of the smell there will be an air freshener. However, it is important not to mask the air, but to eliminate its root.

mold photo

High humidity in a house or apartment is a favorable condition for the appearance of mold on the walls, an unpleasant smell. The situation leads to a feeling of discomfort and deprives the home of comfort. Eliminating the cause of moisture will help get rid of the smell of dampness. Then resort to derivation unpleasant consequences: fungus, mold, heavy air.

The method that allows you to remove the smell of dampness that has arisen in the house depends on the coating on which the cause of the smell appeared - mold. Various things absorb moisture in the home: upholstered and wooden furniture, carpets, wallpapers, mattresses, bed dress, cloth. In the bathroom, the tile joints, the painted surface, the plastic sheathing are covered with mold.

It will not work to remove the smell of dampness without eliminating the cause of its appearance. To get rid of the feeling of discomfort in the house, apartment, in the country, in the garage, you should find out and remove the source of excess moisture. After proceeding to dry the room, removing the fungus.

The methods by which you can destroy dark spots on the walls and remove the musty smell depend on the specifics of the room:

Living room

If mold appears on the walls, ceiling in the living room, use "Whiteness" or another chemical agent containing chlorine. Before surface treatment, please note that the prepared solution (per 1 liter of water 100 ml of the product) can harm the color of the wallpaper.

To increase the effect of the method, dilute household chemicals should hot water. Spray onto the problem area with a spray bottle or wash off the dirt with a sponge. Do not forget about safety precautions: the use of gloves and eye protection - required condition when working with caustic substances. Table vinegar can replace the chlorine-containing agent. Ventilate the room well. Repeat the treatment after 7-10 days.

In parallel, it is possible to eliminate the unpleasant aroma of dampness absorbed into the sofa and carpet covering. If there are no pockets of mold, and a musty smell causes discomfort, it is enough to process the upholstery upholstered furniture and floor covering purchased means for cleaning carpets. Don't forget to ventilate the room.

For moldy stains on carpets, use the home method: a mixture of vinegar, baking soda, detergent for dishes. In a separate container, 100 ml of vinegar, 0.5 l are mixed hot water(temperature 70-80 o C), 1 tbsp. l. detergent or washing powder and so much soda. The components are mixed, the composition is poured into a spray bottle. The liquid is sprayed onto problem areas. Left for 20 minutes. With the use of a sponge, the stains are rubbed, and the remnants of the soda-vinegar mixture are washed off with warm water.

Kitchen

If the walls in the kitchen are tiled, then the accumulation of mold is observed in the seams between the tiles. A remedy containing hydrochloric acid will help to cope with the problem. Affordable, inexpensive, effective is "Suntri gel".

If the problem occurs on the wallpaper, use the above method. In case of severe damage by the fungus, it is necessary to remove the wallpaper in the problem area and process the wall.

Sometimes the penetration of mold is so deep that it is necessary to remove the plaster, treat it with an antiseptic and putty the wall again.

Bathroom

The bathroom is a damp place in the house. You can get rid of fungal plaque on the walls and ceiling using the same methods as in the kitchen. If the walls are painted or sewn up plastic panels, should, armed with ammonia and a brush, walk on the surface. You can use bleach, vinegar, an antifungal solution purchased at a building materials store, housekeeping department. Towels should be washed in an automatic machine and rinsed with "Whiteness", ironed with a hot iron.

Bedroom

In the bedroom, blankets, seasonal clothes, shoes, bed sheets, the right things that absorb the aromas of the home. To remove the musty smell of dampness from jackets, sheepskin coats, blankets, pillows will help Sun rays, fragrances for linen in the form of sachets, gel plates, sachets, pads.

Dry bedding, other things you need on outdoors on sunny side, periodically turning household items, clothes on different sides. Microorganisms are killed by ultraviolet radiation, the heavy smell disappears from things in a few days.

While things are drying, it is necessary to get rid of the musty aroma of cabinet furniture. Shelves and doors should be wiped down with a cloth soaked in vinegar or ammonia(the latter should not be used for wooden furniture). Place containers with vinegar on the shelves, close the doors, leave the product overnight. The next day, the shelves are again wiped and dried. The cabinet should be left open for several days. Then spread the flavors in it and put the dried things in place.

Overview of folk remedies

Means against fungus	a brief description of
soda ash	Soda ash (3 tablespoons), water (0.5 l), essential oil(10 drops). The solution is used to treat tiles, painted and puttied surfaces.
Bura	For 2-2.5 liters of water, 1 glass of borax is diluted. Apply to the affected area with a brush. The solution does not need to be washed off.
blue vitriol	From copper sulfate, which is an antiseptic, a solution is prepared: per 1 liter warm water 30 g of powder and 1 tbsp. l. vinegar. The finished product is applied to pre-cleaned with emery, washed soapy water and dry wall. After drying, the treatment with the mixture is repeated.
Essential oil	Eucalyptus, tea tree, grapefruit, fir oils have a strong antiseptic effect. To remove mold and eliminate unpleasant odors, a solution is prepared (1 tbsp of water and 1 tsp of oil). The product is applied with a sprayer and is not washed off.
Lump lime	Quicklime is a method used against mold on walls and ceilings. Apply in pure form or mix with copper sulphate. A method suitable for whitewashing a basement, pantry, cellar, garage.
Furacilin	Pharmaceutical agent should be used in tablets: 10 pcs. per 0.250 l. water. The product is applied to the dried wall. You can put a plate of salt in a damp corner - it will absorb moisture. The fungus is then removed sandpaper or spatula. Then proceed to the disinfection of the surface with furacilin.

Special remedies for dampness

If it was not possible to remove the smell of dampness and mold on your own, buy ready-made antiseptics:

• Dali is a universal antiseptic used for all surfaces (wood, brick, concrete, painted or varnished surface, drywall, ceramics). Effective against different kind fungus, mold, moss.
• Alpa fungicide is used indoors and outdoors. Before use, it is recommended to remove the top layer of loose surfaces. The tool does not affect glossy paint or varnish.
• Stop mold Olimp. Antiseptic without chlorine and toxins is made for use in bathrooms, basements, greenhouses, garages, damp apartments.
• Biotol spray will help get rid of fungus and mold on the balcony, kitchen, bathroom. Can be used for fences in a private house, monuments.
• Mavix-BIO is a complex remedy effectively using a water repellent. Mold and smell should be removed in two stages: first, the treatment of the wall with impregnation, then with an antiseptic.

How to eliminate the cause of the smell - mold

The smell of dampness in the apartment occurs for various reasons, which lead to one result - a high indicator of humidity. The problem can be caused by:

• flooding by neighbors;
• lower or upper floor (basement influence and roof leakage);
• corner apartment (cold walls);
• not insulated walls of a private house;
• poor ventilation or heating;
• dilapidated water pipes.

To remove the cause, you have to make a considerable investment in repairing the roof or replacing the old sewer. However, without eliminating the main source, get rid of the smell of dampness and dark spots won't work on walls.

As soon as you cross the threshold of the house, you smell the aromas that are characteristic of your home. But what if these odors are unpleasant and dangerous to health? These include the smell of mold, which appears with excessive humidity and poor ventilation. You can save yourself from the fungus, but you need to act very quickly.

Where does moldy smell come from?

Mold can appear in any house or apartment. It is provoked by condensation that appears on walls, in corners, ceilings and inside cabinets. The main risk areas are the kitchen and bathroom. But even in your bedroom, fungus will appear if droplets of liquid accumulate on the walls from time to time.

The smell of mold indicates fungus infestation in wet areas. They are easy to notice - the squares of walls or corners turn black. If you look closely, you can see microscopic dots in the blackness. It is they who are spreading and, if no measures are taken, in the future they can capture the entire apartment.

If the smell has appeared, some no longer hope to get rid of it. But this is because the usual disguise with aromatic agents cannot get rid of mold - you need spring-cleaning and the destruction of the fungus by effective means.

How to start fighting mold?

You need to start by looking for an infected area. Check the corners and walls in the bathroom, in the kitchen. To pay attention outer walls and don't forget about the cabinets - there is also mold.

If you see black dots, you need to fight them. The fight against mold will take place in two stages:

1. Removal of infected areas;
2. Subsequent preventive measures against increased dampness.

For those apartments that are under renovation, use a primer to finish the walls. It is the antiseptic primer that is reliable protection against the formation of the fungus in the future.

The fetid odor and the source of its appearance are removed by industrial preparations, which are easy to find in the housekeeping department. The main advantage of the aerosol is the ability not only to fight the fungus itself, but also to prevent its appearance by absorbing excess moisture.

But folk remedies cope no worse than industrial aerosols. Their use must be constantly supported preventive measures against dampness. But remember, if the affected area is more than 3 square meters. m, you need to contact the experts. Such large areas cannot be processed on their own.

bleach with chlorine

Bleach, which contains bleach, perfectly copes with mold. The main element that destroys fungal spores is sodium hypochlorite. It is also used in cleaning sprays.

The solution performs well in domestic premises, on tiles and on non-porous surfaces.

Mix one part of bleach with 10 parts of lukewarm water. This composition wipes the affected area, taking into account the following nuances:

• If there is little moldy blackness, then use an old toothbrush for cleaning. Dip the brush into the solution and scrub the affected areas.
• For processing hard-to-reach places use the spray gun, spraying the composition on the fungus. Then thoroughly clean all surfaces with a toothbrush.
• It is necessary to work with chlorine-containing bleach with gloves and a mask, because the composition of the substance is toxic, and its contact with the skin and in Airways highly undesirable.

After treatment and removal of the mold, the cleaned area must be dried, otherwise the fungus will reappear very quickly.

Vinegar for non-porous materials

A spray bottle is used to process apple cider vinegar. It is poured into a bottle and sprayed over the entire moldy surface several times. The fungus is removed with a hard brush. After complete removal the mold area is dried.

• Vinegar is used only on non-porous materials, such as tiles. For a tree, this method is not allowed.
• The difference between acetic acid is non-toxicity, but its weakness does not allow the fungus to be completely destroyed. That's why large areas it is better to treat with chlorine bleach. Where bleach will clean everything, acetic acid is only 80%.

Borax solution

Borax dissolved in water not only removes mold, but also suppresses it. further growth. One cup of borax is diluted in 4 liters of cool water.

Mold spots are cleaned with a brush. It is necessary to work with gloves. After the complete removal of the fungus, the remnants of the borax are wiped off, and the place itself is additionally washed with a damp cloth. The cleaned area is thoroughly dried.

• Borax solution is most effective on tiles.
• Borax itself is toxic, but natural, because it does not emit chemical fumes.
• Borax is used not only to remove already existing mold, but also to prevent it in places with high humidity.

Wet areas of the room are dried for at least 24 hours to prevent the recurrence of mold.

Hydrogen peroxide

For cleaning, a 3% peroxide solution is required. It is added to the spray bottle and liberally applied to the surface with mold. Wait 10 minutes and only then start cleaning.

For work, use toothbrushes and sponges. To prevent further occurrence of the fungus, the place is dried very well.

The advantage of hydrogen peroxide is that it is non-toxic, which means it can be used on any surface, such as lamps, clothing, household appliances. But first, it is still worthwhile to test the reaction of the material, since sometimes peroxide eats colors.

Ammonia for large pockets of mold

Mix equal parts ammonia and warm water. The composition is added to the sprayer and applied to the affected areas. The fungus is removed with a brush, and the place itself is wiped with a dry towel that absorbs moisture.

If the mold stains do not give in, spray the infected area with an ammonia solution and leave for 3 hours. Then clean and dry.

This substance must be handled very carefully. It is important to make sure that you are using pure ammonia for cleaning. Never mix it with chlorine bleach because their combination is a harmful and dangerous substance.

Wood baking soda

Baking soda is used on its own or as a powdered paste. It is soft, non-toxic and effective remedy. Its great advantage is that it not only rids the surface of stains, but also visibly freshens the air, so that bad smell evaporates very quickly.

By itself, baking soda does not even require preparation. It is applied directly to the surface and cleaned with a brush. After getting rid of the fungus, the area is washed and dried.

In powder form, soda is mixed with vinegar and water:

1. 2 tablespoons of baking soda are added to 250 g of water.
2. The composition is poured into a spray bottle and applied to the surface with mold.
3. Vinegar is added to another spray bottle and sprayed onto the same surface.
4. Waiting chemical reaction- it will happen almost instantly.
5. Black dots of mold are cleaned with a brush.
6. The surface is washed and dried.

Soda is convenient to use if the fungus has appeared on wooden surface. In this case, neither bleach nor borax solution will cope. If the fungus reappears on a porous surface, if possible, the affected area is removed, for example, if we are talking about drywall or ceiling tiles. The fact is that in this case the fungus has eaten very strongly, and it is impossible to get rid of it, and all measures will be temporary.

Ammonia

Alcohol is not used in concentrated form, only with the addition of water and only on non-porous surfaces.

Water and ammonia are mixed in a spray bottle in equal proportions. The affected area is treated and left for 3 hours. Then the treated area is washed clean water and dries up.

Mold odor prevention

Elimination of a mold raid is not all. If you want to eliminate the unpleasant smell of dampness, certain measures must be taken. All of them will be aimed at reducing humidity in rooms, especially in those where mold has already settled.

1. Extractors are required in the bathroom and kitchen. From time to time check their serviceability.
2. Washed clothes should not be dried indoors if it is not ventilated. In extreme cases, you need to open all the doors of the window and arrange a draft.
3. After wet cleaning, all rooms are ventilated.
4. Where the hood can not cope, put a household dehumidifier.

Mold usually accumulates in the corners. In these areas, you can place a special collecting mixture. For 100 g of table salt, grind 3 plates activated carbon. The powder is laid out in containers with a wide neck and placed in problematic corners for a week. Then the powder is replaced with fresh.

Mold control (video)

Mold is a household pest that causes an unpleasant smell in the apartment. Therefore, if you want to surround yourself with only fresh scents, you need to remove all pockets of mold. How to do this, the expert will tell you in the following video:

Mold - serious problem, which must be dealt with as early as possible, because the fungus tends to spread. And then the bad smell will be the least of your problems. Cleansing surfaces with household products and keeping them dry will help get rid of the pest, as well as keep the apartment clean and comfortable.

The appearance of mold on the walls of a house or apartment - a big problem. The fungus produces a disgusting smell, poses a significant threat to the human body. Get rid of the smell of mold should be immediately, it is harmful to health.

Experts came to the conclusion that mold loves dampness. To get rid of the problem, you need to find the source. Common causes:

• flooding of the apartment by neighbors;
• bathroom, toilet - the main sources of fungus. After the formation of holes, minor damage water pipes, sewerage appears high humidity;
• if the mold is located in different parts of the apartment, the reason is poor ventilation of the premises;
• the fungus appears if you dry clothes right in the room. Cooking food in the kitchen without an extractor hood leads to mold growth;
• the placement of the fungus on the floor indicates poor waterproofing;
• on outer wall it appears in the presence of cracks, poor ventilation. Perhaps the house is old, collapsing. Or the walls of the new building did not dry out after construction, repair;
• indoor plants, aquariums increase humidity;
• mold forms under carpets, sofas, cabinets.

How to eliminate mildew smell

Fungi quickly colonize the human body. You can't live in a house with mold. A dangerous fungal infection spreads to shoes, clothes, household items. It affects the upper respiratory tract, skin.

In the apartment

1. Hydrogen peroxide - folk remedy, which destroys the smell of mold in the apartment, its phenomena. The medicine has an antibacterial effect, prevents the growth of fungus on carpets, floors, walls. It has bleaching properties, which allows you to remove black spots. Be sure to wear rubber gloves before handling.
2. bathroom tiles, windows, wooden furniture it is better to treat with ammonia. The agent is diluted in half with water.
3. Acetic acid will help remove the smell of mold. Apply to a rag, wipe colonized walls. Vinegar removes most types of fungus. After an hour, wipe the surfaces plain water, let in Fresh air to the apartment.
4. Baking soda will help remove the fungus and mold smell from the walls. The working solution is prepared as follows: 1 tsp. soda in a glass of water. To kill the smell, add washing powder, soap.
5. Buy Belizna, Domestos, from the hardware store. Products contain chlorine. Dilute bleach with water 1:10. Treat surfaces.
6. The fungus infects the walls, and acts on the wallpaper. To overcome the mold completely, you need to remove the wallpaper, plaster. Apply a special antifungal primer to the walls. Above - plaster.

In my house

Living in a private house requires constant maintenance of the premises. Increased dampness, a flood after rain in the yard, damp walls and foundations, poorly ventilated rooms are a favorable habitat for bacteria and fungi.

Effective methods of struggle:

• apply the above anti-mold products;
• wipe the floor, walls with a special solution: 3 tbsp. l. trisodium phosphate, 100 ml. bleach, four liters of water. The procedure is carried out 1 time per month;
• removes mold ordinary laundry soap, diluted to a state of thick concentrated liquid. It removes fungal colonies, reduces unpleasant odor;
• Tea tree oil can help you get rid of moldy smells in your home. Dilute with two glasses of water. It is advisable to treat every corner with a spray gun;
• charcoal will help remove the odor. Place containers with coal in the corners of the house.

In a wooden house

In old wooden houses gaps appear between the bars. Entrance gates for mold are formed. Main condition effective fight- get rid of the root cause. It is important to treat the holes with a special construction lubricant.

TO effective methods mold control include:

1. Mechanical removal from walls, ceiling. The fungus exfoliates along with top layer wood. When working, be careful, spores can remain on the floor, causing new growth of microorganisms. Try to remove the remnants of an unpleasant phenomenon.
2. It is recommended to treat the walls with copper sulfate, boric acid.
3. To eliminate the mold will help special substances - fungicides. They kill microorganisms, protect the wood from new attacks of the fungus. It is better to process the walls of the house in order to permanently get rid of spores and prevent re-infection.
4. Buy a special antiseptic for wood at the hardware store. Prepare the solution according to the instructions, apply to all walls of the house.
5. Excellent disinfectant vinegar. Pour it into a spray bottle. Spray on walls. peel the tree wire brush. Reapply the solution. Finally wipe with a damp cloth.

Prevention of mold in the room

Simple rules will help to avoid serious health problems:

• air the rooms every day;
• sunlight prevents the reproduction of fungi. Open curtains, curtains, let light into the room;
• install a hood in the kitchen, in the bathroom. Periodically check the draft in the fan;
• the appearance of condensation on the floor indicates that it needs to be insulated;
• check the plumbing, the quality of the connection nodes. Repair problem areas as needed. Do not spare money - health is much more important;
• if you are going to insulate the house, be sure to consult with experts about the materials. It is desirable for residents of high-rise buildings to insulate the entire residential building. This is how the “thermos” effect is formed - the apartment is cool in summer and warm in winter time of the year;
• if you could not identify the cause of moisture, take a closer look at indoor plants. Geraniums, violets significantly increase the humidity of the air. Remove potential risk. Ficus is sensitive to changes in temperature and moisture, it is possible to estimate the humidity of the air by its condition;
• buy silicone sealant. It protects home surfaces from moisture.

Musty, mold in the house is a serious problem that requires attention. Proper handling walls, cleaning will help get rid of the fungus. The procedure must be repeated regularly so that there is no re-infection at home.

Many housewives are perplexed why household items sometimes smell of dampness. Almost everyone has this problem. main reason such a problem is considered high humidity in the apartment.

This phenomenon is mostly observed in the autumn and winter months. Why is this happening? And how to get rid of the smell of dampness on clothes?

Causes of unpleasant stench and remedies

Removing the smell of dampness from clothes is not easy. After all, the main reason for this phenomenon lies in high humidity. In the autumn and winter seasons, there is no opportunity to fully ventilate the apartment and dry products on the balcony under the sun.

Experts also identify another, no less common reason. It lies in improper drying.

If the hostess puts things in the closet still slightly damp, then you should not be surprised that the smell of mustiness appears, in order to avoid this, you need to iron the linen well and wait for it to dry completely.

How to get rid of musty smell clothes? To solve the problem, first dry the products thoroughly in the sun. If it is winter outside, then this will not interfere with the removal of the stench. Hang all summer and outerwear on the balcony. In many cases, this measure is sufficient.

If the aroma is distinguished by its durability, then you will have to resort to more radical methods. For such cases, special cleaners, deodorants for products and folk methods will come to the rescue.

At home, you can use:

• 9% vinegar;
• baking soda;
• brown;
• turpentine;
• ammonia;
• oxygen bleach;
• coffee beans;
• lemon juice or acid.

Before using the product, test on an inconspicuous area of ​​\u200b\u200bthe fabric.

Getting rid of mold

The main cause of unpleasant odor is on products. Fungi love moisture. Therefore, they instantly appear in those places where there is even a slight humidity.

Before removing the smell of dampness from clothes, take the following measures:

1. Check the condition of the ventilation in the room. You can do it yourself or seek the help of specialists. If there are any problems, then they must be fixed.
2. Fungi do not like fresh air. Therefore, ventilate the room as often as possible, even in the winter season.
3. We get rid of not only the smell from clothes, but also from the shelves. Take out all the products, and the chest of drawers from the inside with a solution of vinegar or hydrogen peroxide.
4. If mold has appeared on the wall behind the furniture, then use a solution based on blue vitriol. As an addition, apply a special primer with antifungal additives on top.

These activities will help not only get rid of the stench, but also protect the body from the harmful effects of fungi.

Removing unpleasant odors from wool and silk

The smell can appear on any type of fabric. Depending on this, it is selected the right way. How to remove stink from woolen and silk fabrics?

There are several effective remedies.

First method

To eliminate the musty smell, use turpentine. Soak a cotton pad in liquid and treat all damaged areas on clothing.

As an addition, you can use white clay. Apply it to the areas to be treated. And then iron it through a layer of parchment paper with a hot iron. Wash after that laundry soap and dry.

Second method

Washing in ammonia helps to get rid of the smell. To prepare the solution, a liter of cool water and 10 milliliters of ammonia solution are taken. Dip the item in the resulting solution and hold for about 10 minutes.

To complete the procedure, wash the wool or silk product in washing machine with the addition of washing powder. Do not forget that such fabrics are washed only with a delicate mode.

Third method

It will remove the stink of a product proven over the years in the form of baking soda. Add a spoonful of sodium bicarbonate to the powder in the tray and wash at 40 degrees.

Removing stink from cotton, calico or linen

Often the hostess is faced with a problem when bedding smells like mold. Natural types of fabric require different methods.

They are as follows:

1. Use table salt. To prepare the product, take a liter of warm water and mix with two tablespoons of salt. Also add a spoonful of ammonia solution. Put the mixture on the stove and boil for 30 minutes. The finished product is applied to clothes and left for an hour. After the time has passed, things are washed in the usual way and dried in the fresh air.
2. Take advantage onions. Take a small onion and cut it in half. Wipe off the moldy area. If you need to get rid of the musty smell, then grate the vegetable and squeeze the juice with gauze. Mix with a liter of water and soak for 15 minutes. Then wash with powder. Add conditioner at the end of the wash.
3. On the farm, yogurt can also be useful. The tool is very easy to use. Just soak the products and leave for 10 hours. It is better to carry out all manipulations at night. Wash your clothes in the washing machine in the morning.

The advantage of such funds is that they are always at hand.

Preventive actions

Housewives clean up odors various methods. But in order not to ask such a problem, you need to follow preventive recommendations.

Preventive measures are as follows:

1. Clean up periodically. Wipe the shelves in the closet with vinegar solution.
2. Ventilate the machine after washing. Don't rush to close the door. Once a week, you can run the car in idle mode. At the same time, a bag is added to the water citric acid or 30 milliliters of lemon juice.
3. Ventilate the apartment more often. This will help prevent high humidity.