• Repair
• Repair
• Interior Design
• About everything
• About plumbing

How to make an aroma lamp for essential oils with your own hands. Do-it-yourself aroma lamp from a light bulb. Do-it-yourself electric aroma lamp. Algorithm for making an aroma lamp Aroma lamp from improvised means

Aroma lamps have become widespread relatively recently. Experts in the field of aromatherapy assure that with the help of smells you can control the mood of a person, his well-being. For example, some aromas effectively relieve nervous tension, while others have an invigorating effect. Using an aroma lamp is the most affordable and popular way of aromatherapy today. The stores offer lamps for every taste, but often at unreasonably high prices. It's not necessary to buy such a device. An original hand-made aroma lamp will be a unique piece of furniture and an excellent assistant for aromatherapy.

The principle of operation of the aroma lamp

Almost all aroma lamps, in which the liquid is heated with a candle, operate on the same principle. Typically, such a lamp consists of two parts located one above the other. The top - the bowl - should be solid, but not flat, with a small recess into which the aromatic mixture is poured. This part must be made of refractory material (glass, ceramics, metal).

The upper part of the aroma lamp must be made of refractory material.

In the lower (the so-called "arch") there is a candle, usually small, in the form of a tablet. This part can be of any material. The main thing is to avoid contact with fire and ensure a stable location of the bowl and candle. The liquid heated by the flame will slowly evaporate and fill the room with aroma.

For an aroma lamp you need small candles-pills

The composition and number of drops in the mixture is calculated based on the size of the room. As a rule, 1-2 drops of oil are enough to aromatize 5 m 2 of the room area. The effect can last for several hours, after which the aromatherapy session can be repeated many times.

Photo gallery: types of modern aroma lamps

Clay aroma lamp with curly cuts resembles a gazebo
Metal aroma lamp with a glass bowl looks exquisite
Pill candles are inserted into the aroma lamp stand with a metal bowl Aroma lamp made of colored glass with a square bowl of transparent glass - a bright spot in the interior Purple aroma lamp made of wire is made in the form of a ball with a glass round bowl with wavy edges
Ceramic aroma lamp Green colour depicts a frog holding a bowl in the form of a leaf
Aroma lamp with a metal base and a glass candle holder is suitable for a high-tech interior
Black ceramic aroma lamp with a red bowl has holes in the form geometric shapes On the sides

How to make an aromatherapy lamp

Today there is a huge range of lamps on sale, but it is quite possible that you will not find exactly the aroma lamp that will suit you in all respects. In this case, the right decision would be to make this attribute at home from improvised materials.

The material for the manufacture of aroma lamps can be the most unexpected

From a tin can

It will take a small can from under any drink and a small candle in the form of a tablet. Turn the jar upside down. The recess in the bottom will serve as a bowl into which the aromatic mixture is added. Cut two holes in the sides in the form of windows in order to make it convenient to put a candle and provide air to the fire. Place the candle inside and light it. Homemade may not be very beautiful, but the efficiency will be maximum!

A regular tin can is great for making an aroma lamp.

Clay

It is a little more difficult to make a clay aroma lamp with your own hands. For this:

1. Blind a round or oval bowl, and leave a hole for a candle in one of its sides.
2. After that, roll a small piece of clay into a ball, flatten it into a plate and attach it to the top of the bowl.
3. Using an ordinary toothpick, you can decorate the future aroma lamp with various patterns.
4. Dry the workpiece thoroughly, after which the product needs to be fired in a kiln. Consider the characteristics of clay - it does not tolerate sudden changes in temperature. To comply with this rule, it is recommended to keep the oven door open for the first 10-15 minutes. After closing the door, slowly bring the temperature up to 200°C and continue to dry for 2 hours.
5. When the product has cooled, insert the candle into a special hole, pour aromatic oil into the plate on top.

Your aroma lamp is ready! The fire will warm the walls of the lamp and the bottom of the plate located on top, the oil will slowly evaporate and fill the room with aroma.

If desired, you can make an aroma lamp from clay

Aroma lamp "Elven arbor": step by step instructions

Particularly diligent craftsmen make real works of art from clay. However, if you really want, then such a masterpiece can be made with your own hands. Everything you need can be purchased at stores that sell goods and tools for making ceramic items.

For this you will need:

• plastic white clay;
• stacks - ceramic sticks for modeling;
• stationery knife with a small sharp blade;
• slip - special glue for polymer clay;
• finished glaze mixture;
• latex gloves for hand protection.

Step-by-step production of the aroma lamp "Elven arbor":

1. First you need to blind the candlestick. It consists of a base (an arbor is attached to it), a curly leg and a flower on which a candle will be installed. The base is a flat clay circle about 1 cm thick. A flower stem is attached to it - three clay sticks are twisted in the form of a spiral. The flower is assembled from 14 curly petals as follows:
2. Fix the candlestick flower on the figured leg. Leave the structure for a while so that it hardens a little, but does not dry out completely.

   After connecting the parts, they must be left to dry.

3. Make gazebo stands. To do this, roll out the clay in the form of a thin sausage 10–15 cm long and twist a spiral consisting of two such sausages. Keep in mind that when twisting, the length of the rack will decrease. Try not to make very long spirals, as the stability of the gazebo will depend only on them. Ideally, you need such a length that a candle is placed between the candlestick and the bowl and there is a small space for the fire to burn. After you make 6 posts-racks, fix them with a slip on the base of the gazebo. Coat the joint with clay. To prevent the racks from squinting during drying, support them with chopsticks or pencils. Leave the structure to dry a little.

   Racks for gazebos should not be very high

4. Make a bowl for the aromatic mixture. The diameter of the workpiece should be the same as the base of the gazebo. Thickness - no more than 0.5-1 cm, otherwise the design will look bulky, and the racks will bend under its weight. Make sure that the depth of the bowl is not too large. Attach it to the racks, coat the joints with slip and clay. To prevent the racks from creasing under the weight of the bowl before drying, you can substitute a lump of newspaper.

   A wad of newspaper will support the bowl on the racks

5. When the workpiece is dry, you can remove the newspaper. Cut it with small scissors or just set it on fire. Carefully, with the help of ceramic stacks and stationery knife, clean up all the bumps and roughness on the workpiece.

   The newspaper needs to be removed, bumps cleaned up with stacks

6. Decorate the top of the design with decor. To do this, you can use small curls and clay sticks.

   You can decorate the top of the aroma lamp with clay curls and sticks.

7. Decorate the lower part of the gazebo with ivy shoots with leaves different sizes. Leaves can be cut out using stacks or using culinary stamps.

   For decorative leaves, you can use culinary stamps

8. Leave the gazebo to dry at room temperature, then slowly raise the temperature in the oven to 200 ° C and continue to dry for 2 hours. The exact temperature and firing time will depend on the type of clay (this must be clarified with the seller when purchasing materials). After the time has elapsed, turn off the oven, but do not open the door - let the product cool completely.
9. Cover the lamp with the finished glaze mixture. Dry to fix required temperature in the oven (drying temperature is determined by the type of glaze mixture). If the glaze is fired at the wrong temperature, the piece may crack. Remember to use protective latex gloves.

   At the end of the work, the lamp is covered with a glaze mixture.

10. Enjoy your new aroma lamp!

Aroma lamps from improvised means

It is not difficult to make an aromatic lamp with your own hands. Even if you don't feel like going to the trouble of making a custom lamp, there are ways to indulge in your favorite scents using the materials you have in your home. For example, a glass with a candle, decorated with cinnamon sticks, can create a festive mood not only with its appearance, but also serve as an excellent aroma lamp.

Home is a place where everyone can feel in complete harmony with the surrounding reality, but this requires an appropriate atmosphere. A simple accessory, an aroma lamp, will help you relax or, conversely, tone yourself up. Such a useful and beautiful interior detail can be made at home with your own hands. To make a lamp with your own hands, you do not need any special knowledge or any rare materials.

Aromatherapy has been successfully practiced by people for a long time as a way to get rid of stress and restore health. Essential oils can work wonders: have a general strengthening and stimulating effect on the human body, help to gather or relax. The easiest way to start your acquaintance with the magical world of smells is with the help of an aroma incense burner.

Coming from the East, today this device enjoys well-deserved popularity, filling the house with enchanting aromas: juicy citrus, sensual woody, delicate floral. An aroma lamp is indispensable for practicing meditation and yoga, creating a comfortable psychological environment in the room, not only at home, but also at work.

Types of lamps

Aromatization of premises, including for healing, is so popular that there are many types of aroma lamps, among which everyone can find the right one for him.

Examples of homemade aroma lamps:

Candle lamp

Such a thing will not only useful tool, but also an original accessory for interior design. This is a kind of closed candlestick, which is also a source of fragrance.

Extremely simple: a special recess on top is filled with water with the addition of a few drops of essential oil, and a recess for a candle is provided below. The liquid heated from the flame evaporates, filling the room with aroma. The effect is quite long - up to several hours, after which the procedure can be repeated as many times as necessary.

An aroma lamp with a candle can be of any shape. As a material for its manufacture, ceramics, porcelain or glass are used. This is something you can do yourself at home. The accessory is very convenient, due to which it can be used anywhere.

Electric aroma lamp

Along with traditional, wide application received aroma lamps, the source of heating of which is electricity. They can be of various shapes, sometimes bizarre, due to which they are suitable for installation in any premises. The fire safety and versatility of such devices makes it possible to use them not only at home, but also in public institutions: kindergartens, offices, hospitals, etc.

The principle of operation is simple: oil is poured into the recess, and the device itself is connected to a power source. Heating occurs very quickly: in a few minutes the room is filled with aroma.

Berger lamps

At first glance, an exotic device, in fact, has been used for more than a hundred years. Once popular among the French bohemia, Berger lamps not only fill the air with aroma, but also help to cleanse the room. Their action is based on the method of catalytic combustion. For such devices, special aromatic compounds are used, that is, ordinary essential oils won't fit.

Berger lamps today are true works of art, they are made of glass and have the most different shape. The cost of products is quite high due to their artistic value. But unfortunately, such a lamp cannot be made at home on your own.

Aroma diffusers

A diffuser is not exactly an aroma lamp, since the aroma is distributed in the room not due to heating, but through natural evaporation. Typically, a diffuser is a glass flask for liquid, into which long wooden sticks are placed. The latter absorb part of the aromatic essence and gradually evaporate it from their surface.

Such a device can be easily made with your own hands by taking a small glass container (jar, glass) and filling it with a mixture of essential oils. Sticks are sold in any flower shop.

Do-it-yourself aroma lamp - is it possible?

But even despite the entire assortment that is presented in stores, it is sometimes quite difficult to find an aroma lamp that is suitable for the price or design. Then the only solution will independent production this accessory at home from improvised materials.

The easiest way to make an aroma lamp with a candle with your own hands. It consists of two parts:

• The main thing is that oil is poured into it. It is made of refractory materials: glass, ceramics, metal, etc.
• Bottom - it contains a candle. It can be made from any material, even wood or plastic, but make sure that it does not come into contact with fire.

Those who know how to work with ceramics, polymer clay, glass and similar materials can create their own aroma lamp by watching the corresponding master class (since production requires certain skills). If there is no possibility, and the do-it-yourself aroma lamp has become a fix idea, then seemingly the most unnecessary items - tin cans - go to the rescue.

Aroma lamp from a can

To make an aroma lamp at home you will need:

• Tin can or coffee can as a base. Even a can of soda or beer will do. It should be made of thin tin so that the material can be easily cut.
• The evaporator can be made either from a steel cocotte maker, which is easy to find and inexpensive; or cut also from tin; or make ceramic.
• Soft hot pad.
• Awl, scissors, sharp knife for work.

On the bank with a marker, the places of the incisions are marked: big window in the lower part for a candle and several holes for the exit of combustion products from above and in the middle.

With a sharp knife, make neat cuts at the marks. Punctures are made in the corners of the window with an awl. With scissors, we continue to give the incisions the necessary shape, bending the edges inward.

The evaporator (cocotte maker) should be installed in the upper hole, securing with pliers. If there is a handle, bend it, so you get a convenient holder for the lamp.

At the bottom of the lamp from the outside, we paste a disk in size, cut out from the hot stand.

If you wish, you can decorate the finished aroma lamp at your discretion: paint with heat-resistant paint, stick decorative elements etc.

Before you make an aroma lamp with your own hands, it is worth considering that:

1. The distance between the heat source and the liquid must be at least 8 cm.
2. The optimal volume of the bowl for uniform filling of the room with aroma is 50 ml.

Work on the creation of an aroma lamp is creative. Here, as in any other business, the easiest way is to repeat what others have already done. There are proven ways to flavor the air in a room, and they work like iron. But not all technical discoveries have been made yet, and not all design features are known. Therefore, prepare ideas and materials - we will create.

Aroma lamp - what is it

The aroma lamp is a device for conducting hot inhalations. In the very simple execution it is a one-piece body, where at the bottom there is a platform for placing a heat source: candles or spirit lamps, and on top there is a bowl where hot water is poured and oil is dripped. As the fire burns, healing compounds evaporate from the surface. The device is designed so that the water does not boil during the operation of the lamp - if the temperature is too high, it changes natural composition essential oil, which is undesirable. You can repeat the analogues of finished house models from clay, dough, metal and glass jars.

Why do you need such a device:

• to sanitize the room. Essential oils almost all have bactericidal and antiviral properties;
• How natural freshener and air freshener. Essential oils have a very unobtrusive aroma - so sometimes people complain that their aroma lamp does not work. In fact, everything is in order;
• to prevent diseases and improve immunity;
• for relaxation and mood improvement.

When essential oil components evaporate from the surface of the aroma lamp, they irritate the sensitive fiber of the olfactory nerve. The signal carried by essential oils enters the brain: namely, its most ancient system - the limbic, which is responsible for our memories, desires and feelings, for the production of certain hormones and neurotransmitters. It is important to choose for aromatherapy not synthetic, not falsified oils, which are mainly sold on the domestic market.

For information: the cost of 20% essential oils starts from 500 rubles. The aromatic extract is diluted in vegetable oil, which is much cheaper, the percentage of essential oil content is indicated on the package. The production of 100% natural professional oil is quite expensive - up to 1 ton of raw materials is processed to obtain 10 ml of ether. So a quality product will cost not 90 rubles and not 200, but from 1000 to 5000 rubles.

Transmission of nerve impulses - commands to the body from the central nervous system The process is electrochemical in nature. It proceeds normally and without failures when the brain assimilates organic compounds from natural essential oils. In response to the received signal, the body independently begins to produce the necessary hormones. The reaction to artificial information obtained with pairs of cheap pharmacy ethers can be unpredictable.

The aroma lamp should work no longer than 20-30 minutes, during which time all useful compounds will have time to evaporate from the surface of the water

catalytic lamps

Catalytic lamps or Berger lamps work according to a different principle: a composition is prepared from alcohol and essential oil diluted in it. The liquid is poured into a glass bottle - it is filled by about two-thirds. The bottle is similar to the one in which eau de parfum is released. Only instead of a spray gun, there is a carved lampshade and a cap on top that closes the end of the wick placed inside. The cap and lampshade are removed before lighting the wick. The burner is catalytic: made of ceramic and platinum, it is set on fire for only two minutes, then the flame is extinguished. Top cover the bottle with a lampshade. For aromatization of a room with an area of ​​18–20 m 2, 20 minutes are enough. The combustion process continues all this time, but passes without fire and smoke, so there will be no burning impurities in the air. To extinguish the lamp, you need to remove the lampshade and replace the cap: it is important to check that it is firmly pressed against the body. From above, you can put the lampshade again and remove the lamp away from heat sources.

The combustion process in an aroma lamp with a catalytic burner leaves no burning smell in the air

Electric aroma lamps

In electric aroma lamps, the oil reservoir is heated by a thermal block, which is an incandescent lamp, so, in fact, the device is a small lamp, and the ability to heat oil on it is an additional function. The lamp base is attached directly to the power supply, which is equipped with a Euro plug and an on / off button. A glass or ceramic case is put on top with holes for air circulation and a recess on top where water and oil are poured. Batteries can also be used as a power source in such a device.

USB lamps

A convenient option, especially for work, is to connect a heated USB platform to a laptop and use it for aromatherapy. True, the models produced so far do not differ varied design: plastic case and minimal decor. Therefore, it also makes sense to copy the principle of the device to another case and adapt a technically convenient model for the home.

A USB aroma lamp can be assembled at home based on any convenient body of a conventional aroma lamp.

Ultrasonic diffusers

A modern development for room aromatization is an ultrasonic diffuser, which additionally ionizes and humidifies the air in the room. The device works from a network with a voltage of 120V, therefore, before operation, you must either change the power supply and adapt the device to a 220V network, or use an adapter. The upper part is removable, under the hood there is a water tank where a glass is poured cold water and 5-6 drops of essential oil. Then the device is connected to the network and left for 6-8 hours. The vapor is cold, the liquid evaporates very slowly, so that the aroma lasts almost all day. As a rule, the diffuser is also equipped with a changing backlight function.

The aroma diffuser usually has a lot of additional effects - lighting, modes, a large water tank, and among the disadvantages is the formation of condensate on the surface where the device is standing

Safety

Prepare for an aromatherapy session. Rinse the bowl where the oil is poured, check that there are no traces of the oil mixture on the outside - it is highly flammable. Heat water in the kettle - only hot water can be poured into the tank, optimum temperature- 50–60 o. Candles are best taken without smell, in metal tablets. The coasters themselves, by the way, can then be reused - they are comfortable, and on the bottom they have a ready-made wick clip.

Before the procedure, it is recommended to ventilate the room for 20-30 minutes. When you light the aroma lamp, close the door, windows and vents. Natural essential oil gives a very unobtrusive aroma - it will not hurt or make you dizzy and you will not want to go out Fresh air. If such a desire nevertheless appeared in those 10–15 minutes that the aroma lamp was working, you have low-quality oil. Find another use for it: economic purposes, for example, for washing clothes or mopping the floor. Remember the dosage: 5-6 drops of oil or oil mixture are enough for a room of 18–20 m 2.

Do not place the aroma lamp on the surface of plastic, foam, it is also undesirable to place the device on a table covered with a tablecloth or oilcloth. During operation, the lamp should not be near heating devices and open flames.

Do not leave the device unattended: the principle “you never know what can happen” has not been canceled, especially if you are dealing with a combustible mixture. Remember that small children and pets create an additional risk of fire - it is recommended to remove them from the room during the procedure. Only 20, at most 30 minutes is enough to aromatize the room, because during this time the oil evaporates. Only diffusers can work for several hours, but there is cold vapor and the evaporation process is much slower.

At the end of the procedure, extinguish the wick / unplug the device from the mains and wash the tank in soapy water and then rinse with clean water and vinegar. So next time you can use a different flavor, and it will not mix with the old one. Then wash the outside of the case and wipe dry.

A lamp that is cracked or otherwise damaged should be discarded.

Caution during the operation of aroma lamps should be observed due to fire safety

How to make an aroma lamp at home

• the oil tank should be easy to clean;
• bowl volume - not less than 30 ml (2 tablespoons of water);
• the distance from the fire to the bowl is 8–10 cm so that the water is hot, but does not boil away;
• in devices that run on electricity and USB, the bowl can be closely attached to the power source.

metal

Materials, in general, are taken the same for several simple models:

• a tin can, preferably narrow and elongated, as from under olives or beans;
• marker;
• construction knife;
• candle / spirit lamp;
• container for oil (saltcellar, socket).

Method one.

It is assumed that the lid is already missing in your jar - it is not needed for the aroma lamp.

1. Decide what your lamp will work on. The width of the opening for a candle and a spirit lamp is different. Estimate the width of the opening and mark with a marker a contour in the form of a hemisphere.
2. The bottom should be flush with the bottom of the jar, the top - so that the fingers pass freely.
3. Draw the same hemisphere on the opposite side of the jar.
4. Cut out both phalanges.
5. Place a socket upstairs, fill it with two-thirds of hot water, drip oil.
6. Light a candle / spirit lamp and place it on the bottom of the jar.

Method two.

1. It differs from the previous one in that an inverted tin can will become the base.
2. Mark the height also along the phalanx of the fingers, draw a contour with a marker and cut holes on both sides of it so that the hand passes through.
3. It is not necessary to adjust the width - such a lamp does not have a bottom, you can light a candle and simply put a jar on top of it.
4. When the side openings are made, turn the jar upside down and make it in the center round hole for fire.
5. The bowl can be made from a cup from a flask, a tank from alcohol burner, glass salt shaker or socket.
6. Pour water, oil, light a candle / spirit lamp and put it inside the jar.

Through holes are needed to ventilate the air in the case

Method three.

From the materials you only need a beer can and a 2.5 mm wire 20–25 cm long.

Method four.

You need a cut beer or low tin can and a piece of wire 2.5 mm thick and 10–15 cm long. Any piece of board will go into the base. To work, you need a drill and an awl.

1. Drill a hole in the board to a depth of 1.5 cm.
2. Bend the wire with the letter G and insert the long end into the drilled plank.
3. Make two symmetrical holes in the jar, pierce it with an awl and hang it on a wire.
4. Pour water and oil into the bowl. Put a lit alcohol lamp on the board.

If the holes in the jar are loose and the bowl is heeling, you need to press the edges more tightly against the wire

Method five.

What you need:

• 2 low sprat or sprat cans;
• sheet thick paper A4;
• spoke;
• silicate glue;
• linen or cotton threads.

How to assemble the structure:

1. Cut sheet A4 into 4 parts, twist each strip into a tube using a knitting needle. To make the paper curl tighter, you can roll the needle on the table.
2. Glue the edge of the strip on silicate glue, iron the tube on the table a few more times.
3. Remove the knitting needle, do the same with the remaining three strips of paper. Tape the paper tubes first to the jar, which will be the water bowl.
4. Then put the structure on the second jar and fix the base tubes in the same way. Coat the threads both above and below with silicate glue, so they will not be combustible.
5. Now you can pour hot water into the top jar, and put a lit candle into the bottom jar.
6. To make the oil evaporate longer, it is recommended to dilute it in an emulsifier - drop the oil into a teaspoon with salt, and then add it to the water.

The support legs are made of paper, but if the threads on which they are attached are smeared with silicate glue, the structure will be protected from fire

Method six.

The aroma lamp is a little more complicated than previous models. For manufacturing you need:

• 2 beer cans;
• small CD;
• candle-tablet;
• glue;
• long scissors;
• copper wire;
• rubber feet for crafts.

What should be done:

1. Cut off the bottom of one beer can and the neck of the other.

   Cut off the bottom of one can, the top of the other, any soft metal cans will do.

2. Dissolve the cut part into tapes 7–8 mm wide, bend the plates at a right angle.

   The cut can will be used to make the evaporator wall

3. From metal tape make a ring equal to the diameter of the jar, insert it into the part of the jar with stripes. The ring will be covered with stripes. If they are too long, cut off the excess, but do not throw away the pieces of metal - they will be needed for decoration.

   The metal ring is wrapped around with ribbons so that the wall is more dense

4. Insert the bottom of the second trimmed can into the ring with the bottom up. This will turn out an evaporator with a double bottom and an air gap - the oil will evaporate much more slowly than just in a tin can.

   When a second bottom is inserted into the ring, an air gap is formed: in this design, the oil evaporates more slowly

5. Twist spirals from scraps and decorate the wall of the structure. decorative function wire rings will also be made - wrap them around the evaporator from above and below.

   Spirals of scraps of strips and wire around the perimeter of the can, as well as a metal overlay on top, perform a decorative function

6. cook load-bearing structure by gluing the legs to the disk.

   Rubber feet for added stability

7. Install evaporator racks from wide metal strips.

   Metal strips are bent several times and attached to the disk with glue

8. Assemble the lamp body. Pour water and oil into the bowl, put a lit candle down.

   The metal legs of the case can also be decorated with metal spirals.

From a glass jar

Aroma lamp from a glass jar, according to the principle of the device, is somewhat reminiscent of a catalytic lamp, which looks like a bottle of perfume. A model made at home will look different, but it will also decorate the interior.

Lamp with wick

What you need for the lamp:

• transparent glass jar with tight-fitting metal lid;
• finished wick;
• awl;
• paraffin oil;
• eco-materials (branches, cones, needles, dry flowers, berries and leaves).

Put pre-selected decor elements in a jar - flowers, leaves, twigs, pour paraffin oil. Make a hole in the center of the lid in advance - such that the wick can easily pass through. When all preparatory work completed, thread the wick under the lid, lower it somewhere to the middle of the jar, maybe even a little lower. The aroma lamp is ready. Do not use it during the day, wait until the wick is saturated with oil. When burning, the aroma of fruits, herbs and spices will spread throughout the house. To enhance it, you can drop a few drops of essential oil into the jar.

In addition to alcohol or paraffin oil, you can add 3-5 drops of essential oil to fruits, berries and herbs - so that the smell is stronger

An old incandescent lamp is also suitable as a housing.

In addition to it, you will need:

• metalwork hammer;
• thin screwdriver;
• coin of large diameter;
• glue or silicone glue gun to him;
• cold welding;
• syringe;
• wick;
• alcohol;
• essential oil;
• match.

How to assemble such a lamp with a wick:

floating candle lamp

The floating candle option works when the jar is filled with an infusion with a strong scent, such as citrus. Therefore, it will be practical to put such an aroma lamp in the kitchen - for freshness.

For a 0.5 liter jar you will need:

• 0.5 l of alcohol or vodka;
• 1 orange;
• 1 lemon;
• candle-tablet;
• essential oil of any citrus.

Peel the fruit, cut the zest into cubes or strips, put half in a jar, leave the other for decoration. Pour a glass of alcohol and leave for a day to get a tincture. Transfer the remaining zest to the jar, set the lighted candle to float.

Clay

The lamp will last a long time if you make it from polymer clay and bake it in the oven.

What you need:

• 150–200 g of polymer clay;
• mineral paints for painting;
• thin brush;
• stack;
• toothpick;
• wick or candle;
• foil to cover the work surface.

How to do:

1. Cover the table with foil, knead the clay until it becomes soft. Divide the mass into two unequal parts - one will go to the base, the other to the walls.
2. The bottom of the future lamp is made in the form of a circle, just roll out the smaller part into a cake 1 cm thick.
3. Form sausages from the remaining clay and stack them one on top of the other until you reach the desired height. It is convenient to level the walls with water and a stack. Next are two options:
   • you cut a large hole in the wall for a candle, several small ones for ventilation, and sculpt the top of the lamp in the form of a bowl;
   • you turn your blank into a bowl, pull out the spout where the wick will lie - you get an oil lamp.
4. The drawing is applied with a knife or a toothpick, as it is more convenient. Dry the clay in the air, then put the mold in a preheated oven to bake. For the first 10 minutes, it is recommended not to close the door so as not to test the strength of the material with sudden changes in temperature.
5. Gradually increasing the heat, bring the temperature to 200 ° C and dry the lamp for 1.5–2 hours.
6. Do not remove the finished product until the oven has completely cooled down.
7. When you take it out, the applied ornament can be painted with mineral paints - they are discreet, soft tones. If you want a more interesting decor, you can use acrylic paints.
8. It is recommended to use the aroma lamp every other day. Pour the oil mixture into the lamp in the form of a bowl, put the wick so that its edge lies in the elongated spout and set it on fire. For an aroma lamp with a candle, do not forget to preheat the water.

The oil mixture is prepared from any vegetable oil with the addition of 1-3% essential oils

Author's master class on making aroma lamps from clay

A user under the nickname DisLikE shared her experience in making an aroma lamp-candlestick in the shape of an apple on her blog. To repeat her model, of course, you need a lot of patience and accuracy, but the finished thing, however, is beautiful.

The materials that I used

• clay;
• rubber spatula;
• stack;
• brush;
• pencil;
• paper;
• glaze for coloring;
• rolling pin;
• sponge and rags.

Progress

1. Work begins with drawing a stencil. There will be through cuts on the front wall of the aroma lamp, for which you need to draw a pattern. The stencil must be cut out immediately and then set aside.

   Using this stencil, we will then cut holes in the front wall of the aroma lamp

2. It is easier to sculpt according to ready-made sketches. We make several sketches, determine the dimensions of the finished product.
3. We knead the clay, roll it into a tight ball, make a recess on top and begin to gradually increase the cavity. It is important to ensure that the wall thickness around the entire circumference is uniform (3–6 mm).

   The walls of the workpiece should be 3–6 mm

4. Trim uneven edges with a stack and smooth with your fingers. We form a hollow ball - for this we stretch the edges, collect them in folds, cut off the excess clay. Level the top of the ball with a knife and water or a rubber spatula.

   Align the edges of the ball, and cut off the excess clay

5. Now the ordinary ball should turn into an apple. Glue a small patch on top of the liquid clay in the center (thickness is about 5 mm), press it well and smooth it, then do through hole. The same must be done on the other side - put a patch, smooth it and make a round hole with a stack, then expand it with your finger. The holes should be symmetrical, then it is easier to outline the cut line along them.

   We make holes at the top and bottom of the workpiece to mark the border of the cut.

6. We cut off part of the future apple, lightly tap the remaining apple on the table to give it stability.

   In the large half there will be an aroma lamp, the small one needs to be rolled into a cake and decorated with slits

7. From the convex side of the workpiece, you need to cut a hole for the candle, having previously estimated that it fits in size. Do not forget that after drying, the clay shrinkage can be up to 30%, that is, the hole will become smaller.

   The hole must be made with a margin, because after firing the clay will "sit down"

8. We roll out a small part of the workpiece into a cake - it is more convenient to roll it through a rag, so the mass does not stick. We attach an apple to the workpiece, circle the outer contour. On the same contour, you need to circle the prepared stencil. We retreat 5 mm from the edge so that the hole does not fall on the seam line, and begin to cut. This will be the front wall of the aroma lamp, it is glued to the liquid clay.

   We glue the carved front wall to the workpiece on liquid clay

9. From a piece of clay we sculpt a leaf and a stalk, then we apply clay to a real leaf so that the veins are imprinted. Then the clay must be carefully separated and glued to the apple. Dry in the air, but so that the sun does not fall. Then fired, painted with glaze and fired again.

   Ceramics is always an experiment, it is difficult to predict what color will turn out

From an orange

If you want to make an aroma lamp from an orange, do it, but you need to use it right away, it won’t stand for a long time.

What you need

• 1 large orange;
• olive oil (1 tbsp. l);
• citrus essential oil (2-3 drops);
• candle-tablet;

Cut the orange, remove the pulp from both halves, grease the walls with an oil mixture. Place a lit candle at the bottom, cut a round hole at the top and connect the two halves. You can take more oil - pour it into the lower half and make an oil lamp out of an orange. A cotton thread is suitable as a wick.

Before lighting the candle, brush the orange halves with an oil mixture - olive oil and 2-3 drops of any citrus oil

The second version of the orange aroma lamp involves more ingredients, in addition to the orange you will need:

• paraffin;
• olive oil;
• citrus essential oil;
• needles;
• 2 wicks.

Cut the orange in half, remove the pulp, and grease the halves with the oil mixture. Place a wick in each bowl. In a water bath, heat the paraffin, add chopped needles or zest to it and fill the halves of the orange. The tail of the wick should protrude 1–1.5 cm from the bowl. Leave the candles to cool for several hours. It is not necessary to clean the refrigerator, the paraffin will seize unevenly. Such an aroma lamp is also prepared shortly before use.

From dough

What you need:

• 1 glass of flour;
• 0.5 cups of vegetable oil;
• 0.5 cups of water;
• wick;
• acrylic paints;
• thin brush.

How to do:

1. The dough should be dense, so do not pour all the water into the flour at once, add gradually.

   The dough is kneaded from flour and water

2. Roll out part of the dough into a cake, form the walls of the bowls from the rest, make an elongated spout for the wick. You can make a pattern with a knife or a toothpick.

   One piece of dough can make several blanks

3. To bake, preheat the oven to 200 degrees, grease a baking sheet and bake for 15 minutes.
4. Cool the product, decorate with acrylic paints, let dry.
5. Fill the lamp with oil, for example, olive, drip 5-6 drops of essential oil. Put the wick into the bowl, leaving the tip on the surface.

   Oil lamps made from dough can be used several times, but they are short-lived

How to make aroma lamp candles at home

To make candles with your own hands, you need:

• wax or paraffin, melted old candles will do;
• cotton thread on the wick;
• candle molds;
• wooden sticks or toothpicks for attaching the wick.

Let's start creating candles:

1. Grate wax (paraffin) on a coarse grater and melt in a water bath, stirring constantly. In order not to spoil the dishes, you can melt the wax in cans, in width they must be different so that one freely enters the other, in height you can take the same. If desired, wax can be tinted by adding grated wax pencils of suitable colors.

   Make sure that the paraffin is completely melted, there should not even be small pieces in the candles

2. Place a piece of cotton thread in each form, so that the end with a margin remains on top - it is convenient to fix it on a wooden stick.

   For small tablets, toothpicks are suitable as a holder.

3. When the wax is ready, pour a little at the bottom of each mold to fix the wick underneath. Well, if you still have metal tablets from old candles, they usually have a convenient wick holder.

   A little paraffin at the bottom of the mold needs to be poured in order to fix the lower edge of the wick

4. Wait about a minute for the wax on the bottom to set and fill the mold to the top.
5. Candles should stand for about a day for the wax to completely harden.
6. Then you can cut off the tip of the wick - it should be well saturated with wax. Recommended length -1–1.5 cm.

Ready-made store-bought candles can be scented, then they will replace the aroma lamp. Pick up your favorite essential oil, or use a combination of several essential oils. Lubricate the entire surface of the candle, wrap it tightly in plastic bag and store in a cool place for 2-3 weeks. During this time, the wax will be saturated with your favorite aroma, and when burning, you will feel it.

Do-it-yourself electric aroma lamp

The easiest way is to assemble a two-in-one unit: an aroma lamp and a lamp. From the materials you will need:

• incandescent lamp 15 W with base;
• cartridge-fork adapter;
• lamp stand;
• can;
• steel wire;
• oil tank (socket, saucer).

1. The bank will act as a lampshade. At the bottom, make a hole for the cartridge.
2. screw in the lamp low power(15 W). At the bottom, make two small holes for the wire, and two more holes for ventilation on the side.
3. Bend the wire at the base with the letter P, then measure the same height on each side of the can and make a fold here and there.
4. Make the second fold to fix the jar on metal frame. The wire inside the jar should not interfere with the ceiling. For reliable fixation, process the ends of the wire with a soldering iron.
5. When the lamp is used as a lamp, direct the light to the side, when for aromatherapy - fix the homemade ceiling in the upward position, put a socket of a suitable diameter on top. The oil will evaporate from the heat of the lamp being turned on.

An energy-saving lamp for heating oil is not suitable; a low-power incandescent lamp must be screwed into the cartridge

How does an electric aroma lamp work - video

How to assemble a USB aroma lamp

As an aroma lamp, it is quite possible to use a heated USB stand: instead of a mug, put a saucer with water and oil. If this option is not interesting, you can assemble a design that will work on resistors.

1. The USB 2.0 port is 5V 500mA, will withstand resistance up to 10 ohms. If you count on 11-12 ohms of resistance, and there is a desire to protect the device from possible overloads, you need to get a total of 4 watts of power. The developer of the USB lamp circuit, when assembling his model, found 0.5 W resistors at home, that is, he needed 8 pieces.

   For convenience, there is a switch in the circuit to turn the aroma lamp on and off without pulling out the USB cable

2. Resistors are located in the same plane, the conclusions must be soldered.
3. It is supposed to fix the structure to a flat surface so that the heating is uniform. That is, you need to find an ordinary aroma lamp, where the oil tank does not come into contact with the body.

   Glue from heating creates impurities in the air, which is undesirable in aromatherapy, so it is better to use paper clips for fastening

4. To connect to USB, power is taken from the red and black wires. The wires are glued to the lamp body.

   The wires in the assembled lamp are not visible; that the lamp is working, it is clear from the burning LED

What can replace the aroma lamp

It is possible to aromatize the air in the room and arrange a relaxation session for yourself without an aroma lamp. Simple analogues of this device will help.

aroma stones

You can make aroma stones from salt dough.

1. For 2 cups of flour, add 1 cup of finely ground salt.
2. In glass hot water stir in any dry food coloring and 5-10 drops of essential oil.
3. To flour and water, add 1 tbsp. l vegetable oil and knead the dough.
4. It is convenient to use silicone molds for molding.
5. If desired, the dough can be decorated with a pattern, then left to dry. The stones are porous texture and long-lasting fragrance. As you exhale, it can be refreshed by adding a few drops of oil to the surface.

Aroma stones can be molded from salt dough, gypsum or clay

Gel flavor

How to make gel flavor:

1. To a glass of boiling water, add 2 tbsp. l gelatin, stir.
2. Add 1.5 tbsp. l glycerin to reduce water evaporation.
3. Take cinnamon powder or any other extract with your favorite scent and 2-3 drops of your favorite essential oil - cinnamon in this case.
4. Based on what your fragrance will smell like, choose a color. Any natural food coloring will work. You can take, for example, ground instant coffee.
5. Stir all the ingredients, pour the mixture into a glass or a jar that can be placed in a visible place in the living room.
6. After preparing the mixture, put it in a cool place for 2 hours. When you get it, decorate as you like.

Try to add only natural food colorings to the flavoring.

Aroma sticks

How to do:

1. Add 25 drops of essential oil to a glass of any odorless vegetable oil.
2. Add 2 teaspoons of alcohol and mix thoroughly.
3. Pour the mixture into a bottle or narrow-mouthed vase.
4. Put a few bamboo sticks 15–25 cm long into the oil.
5. When the aroma becomes weaker, you can add a few drops of essential oil to the bottle.

It is better to take bamboo sticks, they absorb aromas well

Fragrance with hydrogel

Hydrogel is a small elastic balls of polymers. In everyday life they are used as wet ground, but the flavoring of them will also come out quite good. For a sample, one bag is enough (the package is similar to the one in which beads are produced) and 7-10 drops of any essential oil.

1. Oil is added to water - what volume is needed is indicated on the label.
2. Balls are placed in water and left for 12 hours. Take a large container, because the hydrogel will increase in size.
3. When the balloons are saturated with your favorite smell, transfer them to transparent vases and banks and arrange around the apartment.
4. As needed, the fragrance can be refreshed by adding a solution of essential oils to the hydrogel.

To fill a vase, you need one small bag of hydrogel - the balls increase in volume by almost 100 times

flavor with soda

Making this flavor is easy:

1. Soda retains odors for a long time. Sprinkle it with a centimeter layer on the bottom of the jar.
2. Drip 7-10 drops of essential oil.
3. Close the jar with a lid and shake well.
4. Make holes in the lid for ventilation with an awl. If there is no lid, you can close the jar with a layer of foil, and make small holes with a needle.

To prepare the flavoring, soda with essential oil added to it must be tightly closed with a lid, and small holes should be made in the lid.

Making an aroma lamp with your own hands from improvised materials is a simple process. Materials are usually always on the top shelf in the pantry and in the kitchen. And if something is missing, you can adjust the model for yourself, change and add something. After all, creativity is a space for experiments.

Since ancient times, people have known the magic of aromas. They relax and concentrate, awaken passion and soothe, relieve headache, increase immunity, create an atmosphere of comfort and harmony. Having understood what miraculous power scents carry, a person has learned to use them for his own purposes.

To saturate the room with incense, special aroma lamps have long been used, the main elements of which are essential oils. various plants and a wick or candle.

When the oil is heated, esters begin to be released, which envelop every corner of the house with their aromas, plunging those present into a special state, somewhat reminiscent of a trance.

You can buy a censer in a specialized store. However, if you want to have a little thing with an original unique design that will fit into the interior in the best possible way, or if you need a romantic atmosphere right now, and you don’t have time to drop into the store, a home-made aroma lamp will save you. It is not difficult to make such a device with your own hands. In this article, we will look at some of them.

Aroma lamp from cans

An aroma lamp made of tin cans does not require any special expenses; it is suitable for those who want to saturate the air with the aromas of essential oils in a matter of minutes. Also, if you are not sure about the need for a more expensive or complex aromatherapy unit, you can make a temporary aroma lamp from improvised materials to make sure of its usefulness.

How to make an aroma lamp from cans

How to make a budget aroma lamp with your own hands? There are different types and methods, let's look at the simplest one.

So, what is required for this version of the aroma lamp with your own hands:

Progress

• On the jar chosen for the base, we draw a drawing with dots and mark the place where the candle will be inserted.
• We pierce the marked points of the pattern with an awl, and cut a hole for a candle with a construction knife.
• On open side jars install a cocotte maker, beautifully bending the handle, or any other suitable container.
• We put a small candle in the recess

Now you have an aroma lamp, made from improvised means with your own hands.

Clay aroma lamp

To get a clay aroma lamp made by yourself, you will have to put in a lot of effort, time and diligence. But your efforts will be rewarded with a stylish exclusive thing that will delight you and your loved ones for a long time.

The advantage of creating a product from such a material is that its shape, color and pattern is determined only by your imagination.

How to make a clay aroma lamp

Materials that you will need to create an aroma lamp with your own hands:

• Ready-made clay for modeling.
• Foil or a dense piece of polyethylene.
• A special knife for clay or plasticine (although you can use a regular toothpick).
• Paints.
• Water.

Progress

• Lay out on a work surface polyethylene film or foil.
• We knead a piece of clay the size of a future lamp.
• We roll out the mashed material into a cake about a centimeter high and cut out the shape of your choice.
• Lay layer by layer on the carved clay sausage base until the product reaches the desired height.
• If the idea requires it and you decide not to use a candle in your aroma lamp, but to set fire to a wick dipped directly into a mixture of essential oils, pull out the spout for the wick on one side of the future lamp.
• Use water to level the surface of the clay product until smooth.
• Apply special knife or stick an embossed pattern and stick patterns.
• You need to dry the lamp as follows: first, place your work in the sun on the street if you live in a private house, or on a balcony if in a multi-storey building. After it dries, place it in the oven, increasing the temperature by 30 degrees every fifteen minutes. After you turn off the oven, leave the aroma lamp in it until completely dry.
• Color if desired ready product paints.

Clay aroma lamp, made by you, will suit any interior and create a feeling of comfort and harmony at home.

Electric aroma lamp

Most safe way saturate the house with a pleasant magical aroma - an electric aroma lamp. It is safer than a lamp that uses a candle or wick. Also in this way you will get a purer aroma of essential oils, since notes of paraffin or burnt wick threads will not be mixed with their smell.

The principle of operation of such a lamp is that, under the influence of an electric lamp, a mixture of oils and water reaches high temperature, esters are released and begin to mix with the air of the room.

How to make an electric aroma lamp

Let's look at the basic principles of how to make an electric aroma lamp with your own hands.

For this you will need:

• The base is in the form of a cylindrical tube without a bottom.
• Bulb up to 15 watts.
• A container for a mixture of oils, the diameter of the edges of which should be slightly larger than the diameter of the base, and the diameter of the bottom should be smaller.
• Cartridge.
• Plug cable.
• Stand on which it will be possible to install a cartridge with a light bulb.

Progress

• Assemble the cartridge, cable and plug into a single structure.
• Screw the bulb into the socket.
• Install the assembled structure on the stand.
• Place the product under the selected base in such a way that the cable with the plug is not pinched or kinked anywhere.
• On top of the base, place a container that serves as a bowl for oil.
• Now it remains to pour a mixture of oils and water into the bowl and plug the plug into the outlet.

As you can see, it is not difficult to make an aroma lamp with your own hands, it is enough to make a little effort, ingenuity and imagination.

Principles of Aromatherapy

Now you know how an aroma lamp is made with your own hands - master classes on its creation are presented above. But, in order to get the maximum benefit from the aromatherapy procedure and not harm yourself and your loved ones, it is important to know a few rules:

• The first step before conducting aromatherapy is to ventilate the room for at least 15 minutes.
• Then you need to tightly close all windows and doors.
• A mixture of oils and water is poured into the bowl, at the rate of 2 tablespoons of water and 4 drops of essential oil for every 15 sq. m.
• They light a candle placed in a special hole, or plug the cable into an outlet.
• The procedure should be stopped after a maximum of two hours.

Oils suitable for aromatherapy

Usually, using an aroma lamp, a person is waiting for a certain effect: relaxation, concentration, treatment, awakening, etc. To obtain the desired effect, it is important to choose the right essential oil.

• Oils such as tangerine oil, tea tree oil, cedar oil, eucalyptus oil, peppermint oil, etc. are suitable for the prevention or treatment of colds.
• To awaken energy, use citrus oils, rosemary, etc.
• To relax, fill the aroma lamp with lavender or ylang-ylang oil.
• For a romantic evening, choose patchouli, rose, neroli or any aphrodisiac oil.

In this article, you got the answer to the question of how to make an aroma lamp with your own hands. Understand the basic principles of aromatherapy.

Experiment and make your life brighter.

What is an aroma lamp? This is a "miraculous" device that aromatizes the room due to the evaporation of essential oils. In the store, these devices cost fabulous money, but the benefits from them are amazing, especially during epidemics. viral diseases. Let's try to make an aroma lamp with our own hands, because the effect will be the same, and its price will be ten times cheaper.

What is an aroma lamp for? Modern psychologists say that the creation of an “aromatic environment” in a room greatly affects the emotions of the people who are in it. With the help of aromas in this way, you can even control the human mood, for example, create romantic evenings, tone up, increase libido, etc. The aroma lamp forms a relaxing aura, heals by killing microorganisms, in particular viruses, activates the internal forces of the body, which is very important, for example, in or.

What are aroma lamps?

The simplest aroma lamp is a container with water and essential oils dissolved in it, under which a candle burns. The principle of its operation is simple: a small candle evenly, but not strongly, heats the bottom of the container at the top, and the essential oils gradually evaporate from the surface of the water, saturating the room with a healing aroma. In the East, water is not used, and only aromatic oils are poured. However, the smell at the same time can be very strong, and this, in turn, can even harm.

For a good aroma, about 10 ml of water and 5 drops of essential oil are needed, but you can choose “your” concentration yourself.

Do-it-yourself aroma lamp: is it possible? How to make it?

Prices for aromatic lamps in stores are very "biting", although in fact the basis of each is only material and design. But the result does not depend on this, right? Let's try to make an aroma lamp with our own hands. Using improvised means, you can create a truly effective weapon against viruses and bad health.

Do-it-yourself "candle" aroma lamp

You will need a can of lemonade or beer and a small candle, even in the manner of those sold in romantic rendezvous sets. Cut off the top of the jar and cut in the sides as far as possible more holes(you can use three large ones so that you can put a candle inside through one of them).

Place a small deep glass or metal saucer on top of the cut of the jar with a bottom diameter slightly smaller than the diameter of the jar, so that its edges extend beyond the edges of the jar. Pour water into a saucer and drip oils. Put the candle inside and light it. Do-it-yourself aroma lamp turned out to be not very beautiful, but its effectiveness is maximum!

Do-it-yourself electric aroma lamp

You will need an empty hollow cylinder without a top and bottom, a light bulb with a base and a glass plate / bowl. Place a light bulb with a base (which is plugged into a socket) inside the cylinder, fasten it, and place a glass container on top into which you pour water and oil.

The bottom of the container can be taken slightly less than the diameter of the cylinder. Take a light bulb no more than 15W. Turn on - the light bulb heats the bottom of the plate, the essential oil evaporates.

Aroma lamp "battery"

The easiest option: take a porcelain or ceramic cup, fill a little warm water(50ml), add 5-7 drops of your favorite essential oil, and place the cup on hot battery. If you need a "quick" aromatherapy session, this is the best thing you can do.

And, of course, aromatherapy can be carried out using an ordinary piece of cloth soaked in a solution with essential oil. Put a cloth on a hot battery and enjoy the aromas!

What else are aroma lamps?

On sale you will find all similar types of aroma lamps described above. There are also diffuser aroma lamps, the action of which is based on the spraying of the essential oil itself without the participation of water in the process. At the same time, the consumption of ethers is minimal, since it does not even touch the walls of the vessel with the diffuser. The prices for such devices are fabulous, but now you can enjoy the aromas by making an aroma lamp with your own hands.

Mixtures for aroma lamps

You can drip not only pure oil, but also mixtures of esters into a hand-made aroma lamp, and depending on the desired result, they can be as follows:

• From unpleasant odors essential oils of rosemary, mint and lemon in equal proportions will help in the kitchen. If desired, the lemon can be doubled. In total, 5-6 drops of the mixture per 10 ml of water are recommended.
• To increase self-confidence: incense 2k, grapefruit 2k, ylang 2k, orange 2k.
• For toning the nervous system: 2k mint, 2k cinnamon, 2k juniper, 3k neroli.
• For calming and relieving anxiety: palmarosa 4k, valerian 5k, ylang 3k or sandalwood 4k, frankincense 2k, rose 3k.
• To disinfect the premises during an epidemic: 4k tea tree, 2k lemon, 2k chamomile.