• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Acrylic bath than clean home remedies. How to wash an acrylic bath - tips and tricks

New acrylic bathtub looks flawless - unusual design, glossy surface and perfect smoothness. In order for the bowl to retain its gloss for as long as possible, you should adhere to the basic rules of operation and follow the recommendations for care.

The primary task is the competent choice of a means for cleaning acrylic bathtubs, taking into account the technical and design features of the polymer "font".

The popularity of acrylic bathtubs is due to their excellent appearance, variety of shapes and colors, smooth surface, low thermal conductivity and affordable cost. However, polymer plumbing, unlike metal products has a couple of significant drawbacks: susceptibility to mechanical stress and painstaking maintenance.

Service acrylic bath must be carried out without any abrasive agents. The use of metal brushes, washcloths and brushes with hard bristles is excluded. If the banal rules of care are not observed, the appearance of a network of micro-scratches is ensured, as well as the "scratching" of the upper glossy layer.

Acrylic is a thermoplastic durable polymer, but it does not withstand strong impacts and scratches easily. Even minor mechanical damage and roughness acquire a yellow-gray tint over time.

There are also a number of restrictions on detergents. As part of household chemicals must not be present:

1. Small components. Powders, including dry soda, contribute to the appearance of micro-scratches - the shiny surface fades and becomes matte.
2. Chlorine. The substance corrodes the polymer - the structure becomes porous, the surface becomes rough.
3. Solvents. Regular use of acetone, oxalic acid, white alcohol leads to partial dissolution and deformation of the top layer. As a result, the bowl loses its former attractiveness.

Ammonia and formaldehydes have a similar effect with acetone. With prolonged contact with chemicals, acrylic begins to deform.

The category of prohibited substances includes concentrated alcohols, acids, gasoline, alkalis. All substances change the color of acrylic, provoking the appearance of microcracks.

An arsenal of cleaning products and technologies

The basic requirement for caring for the "font" is quite standard - to remove the pollution that has appeared in time. To maintain the bowl in good condition, improvised or universal purchased funds. To rid the surface of old stains and “revive” the bath, you will have to try and carry out several cleaning cycles.

Folk methods - light artillery

Relatively recent pollution can be removed with improvised means. To the verified folk recipes sparing actions include:

• lemon acid;
• toothpaste;
• baking soda;
• vinegar and salt;
• hydrogen peroxide.

Limonka. The acid helps in the fight against rust stains and helps to keep the bathroom white.

For a bowl of standard volume (200 l), you need a bag of dry lemon for 50 g. Acid granules must be dissolved in half a liter of water at a temperature of 50-60 ° C

Following actions:

1. Fill the bathtub with water at 40-50°С up to the overflow hole.
2. Add lemon juice and stir.
3. Leave to "sour" for 2 hours - salt deposits soften during this time.
4. Drain the solution and rinse with water.
5. Wipe the surface dry with a soft cloth.

Old deposits are removed with a "cooler" emulsion. The cleaning composition is prepared at the rate of 50 g of lemon per 2 liters of water. The affected areas should be treated with a solution, left for 20 minutes. Evaluate the result and repeat the procedure if necessary.

"Lemon" cleaning should not be abused. In order not to damage the enamel, the procedure is recommended to be performed no more than twice a year.

Toothpaste. The method is expensive, but quite useful for express cleaning from yellow plaque. For the procedure, a white paste or powder is suitable. The dry composition must be diluted with water to a state of thick sour cream.

Spread toothpaste with a soft brush over contaminated areas - a layer thickness of about 1.5 mm. Wash the surface after 15 minutes

If the desired effect is not achieved the first time, the procedure should be repeated, increasing the waiting time to 40-60 minutes.

Baking soda. Sodium bicarbonate - soda will help maintain the whiteness of the bath. In dry form, scouring powder is not used, as it can damage the coating. Soda is pre-diluted with a small amount of water.

Prepared slurry processed "affected" areas of acrylic. It is impossible to rub soda into the surface, it is enough to leave the solution for half an hour, and then rinse with water.

Based baking soda you can make a cleaning cream for the gentle care of acrylic sanitary ware.

Compound homemade remedy: water - 0.5 l, soda - 100 g, laundry / baby soap - 15-20 g, aromatic oil

Cooking technology:

1. Rub a bar of soap, pour hot water(60 ° C), "insist" the solution for a couple of hours.
2. Add soda and a few drops of aroma oil to the soap mixture.

Store the finished product in a plastic or glass container. How to use a homemade "cream": soak a soft sponge with the composition, wipe acrylic coating. Wash off after half an hour and pat dry. The result of the treatment is a clean bath and filling the room with a pleasant aroma.

Vinegar and salt. In the struggle for cleanliness, acetic acid showed itself perfectly - it removes yellowness from the bottom and walls of the bowl. There are two possible applications:

1. local cleaning. Apple cider vinegar (20 g) diluted with water (200 g). Moisten the problem area with vinegar solution, rinse with water after 10 minutes. The procedure should be performed with rubber gloves.
2. Full update. fill the cup warm water, pour 1.5 liters of weakly concentrated acetic acid into the bath and leave overnight. Drain the solution, wipe the walls and bottom with a soft sponge. Treat uncovered sides of the bath according to the “local cleaning” method.

Minor rust contamination can be treated with salt. Salt crystals are a hard abrasive, so you need to be very careful. For work, it is better to use finely ground salt.

Prepare a thick saline solution by mixing grains of salt with water. Apply "gruel" on the stain, hold for 5 minutes. To enhance the effect, wipe the contaminated area with a rag soaked in turpentine. All work must be done with gloves

Hydrogen peroxide. A more radical method is the use of hydrogen peroxide and ammonia. In a glass container, combine 100 ml of ammonium hydroxide and 50 ml of peroxide. Apply the solution to the dirt with a cotton pad or sponge, leave for 10 minutes.

Wipe the cleaning composition with a soft cloth, then rinse the bath. “Overexposing” the solution for longer than the allotted time is not worth it - prolonged and frequent contact of acrylic with ammonia can harm the polymer coating

Household chemicals in the fight for cleanliness

This group of drugs is universal means for cleaning and maintaining the attractiveness of acrylic bathtubs, designed for regular use. Names of popular items for the care of polymer plumbing:

• Ravak Cleaner (Czech Republic);
• San Klin (Ukraine);
• Bagi Acrylan (Israel);
• Frosch Green grapes"(Germany);
• Bas "Team-Profi" (Russia).

A sanitary ware manufacturing company has introduced its own line of preparations for acrylic surfaces.

Universal Cleaner does not contain chlorine, gently cleans the coating from particles of lime and grease. Sold in a 500 ml bottle with a convenient spray dispenser

Cleaner cleans and glosses the acrylic finish. To remove old dirt, the liquid must be sprayed over the bath bowl and left to act for 10 minutes. After - rinse with water.

SanKlin. Despite the relatively high cost, means has an extensive spectrum of activity. Liquid emulsion copes with traces of calcium soap and rust without damaging the capricious coating of the bath. Contains no phosphates, acids or abrasives.

SanClean is suitable for cleaning jacuzzis, showers, glass and mirror surfaces.

The drug has won many positive feedback users. Cleaning foam is effective in fighting fungus, limescale, soap residue, mold and rust.

The composition of Acrylan is surfactants in tandem with citric acid. Such a symbiosis of components explains the cleansing and disinfecting qualities of the drug. After processing, a protective film layer remains on the bowl, which reduces the accumulation of dirt.

Possible volumes of Acrylan bottles: 400, 500 and 750 ml. Use cautions: use gloves when applying, do not mix with other "chemistry"

The main advantages of Acrylan:

• high efficiency;
• ease of use;
• quick action - it is necessary to distribute in the bath and rinse;
• versatility - applicable to various coatings.

The disadvantages of the tool include high cost and toxicity. Cleaning should be done with the hood turned on, as Acrylan has a pronounced smell of chemicals.

The drug is made from biodegradable components. The basis of the composition: tensides and tartaric acid. Frosch- best option for allergy sufferers and adherents of environmentally friendly products.

The product gently removes traces of water drops, mud and lime deposits, and also fills the bath with a fruity aroma. Minus "Green grapes" - does not disinfect and does not cope with "packed" salt deposits

Environmentally friendly cleaning mousse Russian production. Suitable for complex care of plumbing: processing of acrylic, plastic, stainless and chrome surfaces. The solution penetrates into the structure of pollution, destroying particles of salt deposits and removing unpleasant odors.

Type-Pro does not contain abrasive components. After use, a protective dirt-repellent film forms on the acrylic surface. The tool returns the coating to a mirror shine

Removal of scale and rust

In the "running" state of the bath, universal preparations may be powerless. Specialized products will help restore the former whiteness and shine:

• Triton Acryl cleaner (Russia);
• Sanoks " Clean bath" (Russia);
• cleaning paste "Astonish" (Great Britain).

The tool can be classified as a universal preparation with a pronounced cleansing effect. Acril cleaner copes well with greasy, calcareous deposits, rust stains and water stone.

Main active ingredients: cationic and neon surfactants, antiseptic, organic acids and fragrance.

How to use: spread on the surface and leave for a quarter of an hour. Wipe with a soft sponge, rinse and rinse thoroughly with running water

Inexpensive product from the category of "Green Technologies" with a whitening effect. In the composition - surfactants, complexing agents, flavorings and glycerin. The absence of acids makes the preparation safe for acrylic coatings.

With a “gentle” filling, Sanox is effective against most bathroom contaminants, including potassium permanganate and rust. The drug is applicable for cleaning any plumbing and tiles - it gives gloss to surfaces.

Main advantages: affordable cost, efficiency, safety. Cons: a rather pungent smell and uneconomical consumption due to the liquid consistency. For getting good result the agent must be kept for about 30-45 minutes.

Astonish pasta. Despite the fact that the main purpose of the product is to care for kitchen surfaces, the paste is often used to clean acrylic bathtubs.

Astonish acts carefully and efficiently. The composition contains soap, mild abrasives, orange extract. The tool is produced according to innovative technologies and meets stringent European quality standards.

The cleaning paste is safe and multifunctional, thanks to its consistency it is economical to use. The disadvantage of Astonish is that it is difficult to find in a retail network

Whitening products

Cif Ultra White (Hungary) is considered the leader among “soft” products with a whitening effect, Mister Chister (Russia) is in second place, according to consumers.

The composition of the cream includes the smallest microgranules - whitening components that enhance the action of cleaning agents and provide snow-white acrylic.

Cif Ultra White has a cumulative whitening effect - the more you use the product, the whiter your plumbing becomes. The cream does not leave streaks and micro-scratches

Contraindications for use: wallpaper, wooden surfaces, textile, galvanized metal, vinyl, linoleum and aluminum.

Mr Chister. The product effectively removes the yellowness of the bathroom bowl. In addition, Mr. Chister does an excellent job with rusty areas, fatty deposits on polymer surfaces and has an antifungal effect. Additional advantages: low cost and saturation of the bath with shine.

Bathroom disinfectants

Any bath once a year should be “passed” by disinfection, hydromassage systems are subjected to sanitary cleaning monthly. The procedure is aimed at the destruction of fungal spores, mold and pathogens. Specialized tools will cope with this task: Ravak Desinfectant and Triton Desinfectant.

Both concentrates are chemically potent agents that are not capable of harming acrylic. Suitable for disinfection of sanitary ware, including hydromassage systems

Highly concentrated emulsions, depending on the purpose of use, require dilution with water - the ratio of cleaning agent and water is indicated in the manufacturer's instructions.

The nuances of cleaning the bowl with hydromassage

Hydromassage systems are equipped with nozzles connected to circulation pump. The technique creates an overpressure of the water flow, which, under pressure, exits through the nozzles in the bathroom.

With regular use of the hydromassage option, the nozzles do not have time to dry out - constant humidity provokes the reproduction of microorganisms, the growth of mold and the accumulation of lime deposits.

The procedure for the disinfection procedure:

1. Fill the tank with water so that the nozzles "gone" under the water by 5-7 cm.
2. Pour a cleansing concentrate into the bath and turn on the hydromassage for 20 minutes - the liquid should make several circular cycles through the system.
3. Drain the water and refill the bowl.
4. Turn on the sprayers for 5 minutes and empty the bath.

Upon completion of the procedure, it is necessary to perform a standard cleaning of the walls and bottom of the "font".

Prevention of the appearance of pollution

Compliance with the basic rules for using an acrylic bath will save you from extra costs, will facilitate the care of plumbing, extending its service life.

No. 1. Do not soak laundry. The constituents of washing powders are not always comparable to a polymer coating. In addition, if bright clothes fade, then the bath has every chance of “absorbing” the paint. This property of acrylic should be taken into account when washing your hair after a "fresh" painting.

No. 2. Taboo on bathing animals.

Pets with their claws will damage polymer coating. Alternatively, you can put “anti-scratches” on the paws and put the animal on a litter

No. 3. Caring attitude. Do not put heavy objects, metal basins, etc. into a plastic tank. They can deform acrylic, leave dents and scratches.

No. 4. Regular care. The best prevention the formation of pipe stains - cleaning the bath after each bath. It is enough to rinse the bowl with warm water, remove drops with a cloth.

Conclusions and useful video on the topic

The video compares the effectiveness of traditional cleaning methods (toothpaste and soda-soap solution) with household chemicals:

To maintain the impeccable cleanliness and whiteness of the “font”, there are many operating funds. Improvised preparations do not always cope with the task, so it is better to use specialized household chemicals, created taking into account the characteristics of acrylic plumbing.

When the bath is clean, then it is not only pleasant to spend water procedures, but you can also be sure that nothing threatens your health. Therefore, bathroom care plays a very important role and it needs to be given enough attention. Sometimes the question arises about how to wash acrylic bath not to spoil given material and still get the desired result.

At the same time, it must be taken into account that pollution will occur due to poor quality water, which you are used to using or when there are certain harmful components in the water. Gradually, under the influence of these unpleasant factors, any bath begins to become more yellow and dull, loses its attractive appearance and whiteness. This cannot be avoided even when it is cleaned daily with special detergents.

It is better to wash the acrylic bathtub regularly than to clean it afterwards

How to disinfect an acrylic bath

Of course, acrylic is not one of those materials that lend themselves to the very rapid appearance of mold or fungus, but still it needs to be further disinfected. It is especially important to do this when there are small children. This is necessary not only to make it pleasant to carry out water procedures, but also in order to provide children with maximum protection and safety.

So, the procedure for disinfecting an acrylic bathroom at home is very simple and everyone can do it, because it does not take too much time.

1. Pour water into the bath at room temperature.
2. Add a small amount of a special disinfectant to it;
3. stir the product and leave for about ten minutes;
4. drain the water and then rinse the tub thoroughly several times to remove all traces of the disinfectant.

How to properly care for acrylic surfaces video

If you don’t know how to wash an acrylic bathtub at home, then ask the experts for advice and they will help you choose the best and highest quality product that will help remove all the dirt and at the same time will not harm the surface.

Everyone has a desire to keep their home clean. Special attention is given to the bathroom and the bathroom, because it is in a warm and humid environment that undesirable microorganisms thrive. In our lockers you can find a lot of tools in order to clean everything in the world, but not every housewife knows how to clean an acrylic bathtub.

Why? Yes, because the good old cast iron bathtubs are still quite popular, but many are already taking steps to replace an old bathtub with an acrylic marvel.

In this article:

Acrylic bathroom basics

Despite a lot of advantages, acrylic bathtubs have one serious drawback - low mechanical strength. It is for this reason that it is worth paying due attention to the issue of maintaining the bath in exemplary condition.

What Not to Use to Clean an Acrylic Bathtub

• metal and simply hard brushes are categorically contraindicated;
• cleaning the surface "dry";
• cleaning products containing abrasive particles;
• washing powders;
• any products containing acetone, ammonia, chlorine, formaldehyde.

In fact, cleaning an acrylic bathtub is not that difficult - you can use any liquid all-purpose cleaner that does not contain aggressive substances.

The surface of the bathtubs is very smooth, so it is easy to clean it. It is enough to rinse it with warm water after each use and wipe it dry with a soft cloth. For a more thorough cleaning, you need to apply a liquid agent to a damp sponge, wait 10-15 minutes and thoroughly clean the surface of the bathtub with water.

What cleaning products can be used

In fact, finding a cleaner suitable for acrylic bathtubs is not at all difficult, since sanitary ware manufacturers are constantly developing and selling household chemicals designed to care for their products as well. All these funds have high quality and they can be easily interchanged with each other.

So, we offer you a small list of special tools that you can safely use:

• Acrylan is a popular remedy with a memorable name. It acts quickly, gives good results - perfectly removes soap residue, mold, rust stains and limescale. At the same time, its effect on the surface of the bath is very gentle. The bath after washing will acquire a pleasant shine, since acrylan forms a thin protective film on its surface.
• Rawak is also a very well-known remedy. Or rather, even a whole line of products, each of which has its own purpose: they can clean acrylic, restore the protective layer, remove scale and grease, and disinfect the bath.
• Acrylic Polish is a line of products from the well-known manufacturer Kolpa. Designed for the care of acrylic, also used for repairing and polishing surfaces.
• Tim Profi is a modern professional biodegradable product. Does not contain abrasive particles, quickly and efficiently removes old dirt, makes the surface shiny.
• Mr. Chister is a relatively inexpensive and very popular product on our market that contains a special polymer that allows you to clean the bath well from rust, grease and lime. It also has antibacterial and antifungal properties.

How and how to remove a water stone

Scale deposits are, unfortunately, a very common problem with acrylic bathtubs. But you can deal with it with simple improvised means:

1. pour water into the bath at a temperature of about 25 degrees;
2. pour 500 ml of a 7% solution of citric acid or vinegar into it;
3. mix the water with a stream from the shower and leave for 12 hours;
4. drain the water and rinse the bath well with a shower;
5. wipe the surface dry.

If you have allowed a strong overgrowth of the bath with lime, then you can clean it chemicals like Acrylan or RAVAK Turbocleaner.

How to disinfect an acrylic bath

Although acrylic does not encourage mold and germ growth, the tub still needs to be disinfected. Especially if there are small children in the house. To make bathing not only pleasant, but also safe, it is enough to perform a simple procedure once a year:

1. fill the bath with water at room temperature;
2. add a disinfectant like Tim Pro or RAVAK Desinfectant to the water;
3. thoroughly stir the product in water and leave for 10 minutes;
4. several times diligently rinse the bath with water, removing the remnants of the disinfectant composition.

So, from all that has been said, it follows: in the care of an acrylic bathroom, the main condition for success is the regularity and thoughtful selection of care products.

Almost every modern housewife faced the problem of how to clean an acrylic bath at home. It is these fonts that are most popular today, because it is these models that differ in the most exquisite design and good operational characteristics. But the polymer material requires special care and the use of certain household chemicals. In this article, we will share with you the secrets and recommendations for cleaning acrylic surfaces.

Features of acrylic bathtubs

Acrylic - plastic material, which has a certain level of rigidity and durability. Acrylic bathtubs are lightweight, comfortable and easy to maintain, and therefore quickly replace cast iron products with modern market sanitary equipment.

Acrylic sanitary ware is manufactured according to one of the following technologies:

1. Extruding - A certain amount of fiberglass and epoxy is added to the plastic to stiffen it. Such plumbing products are installed on a specially made frame made of metal or moisture-resistant wood.
2. Casting - allows you to create a stronger and more rigid structure that can be installed directly on the legs. These products are resistant to mechanical damage and therefore much easier to clean.

Important! Acrylic bathtubs are easy to care for thanks to special additives, which prevent the growth of bacteria, fungal infections and mold.

Another advantage of acrylic is its resistance to corrosion, and, accordingly, the absence of rust streaks.

How often to clean?

To keep your acrylic bathtub clean at all times, it needs to be cleaned as often as possible. It is much easier to regularly wash off minor stains from an acrylic surface than to spend a lot of time looking for ways to wipe off serious and deeply ingrained stains:

1. After each bath, the tub should be rinsed with water and a small amount of detergent, such as liquid soap.
2. After performing the procedure, dry the surface with a clean soft cloth or terry towel.

Important! It is necessary to clean the bath with more aggressive products once every 2-3 weeks.

All recommendations for cleaning an acrylic surface are similar to the rules for caring for other materials, but they have certain features. To quickly and efficiently get rid of any contaminants, use the following materials:

• Foam sponge with soft surface.
• fabric material

As detergents, you can use as folk methods cleaning, and household chemicals - various powders, pastes and gels.

Use of household chemicals

If you appreciate a quick and high-quality result, then when deciding how to clean an acrylic-covered bathtub, pay attention to one of the following cleaning products from trusted and well-established manufacturers:

cif

One of the main positive qualities This detergent is the versatility of use. The cleaning composition is available in the form of a gel or spray, which does not contain abrasive substances that can scratch or otherwise damage the surface of the bath.

This product is suitable for cleaning both acrylic and other surfaces - ceramics, plastics, stone or enamel coating. This detergent trademark has a high efficiency of cleaning stains of rust, grease, yellowness or lime.

Important! It is also worth noting that this detergent has an affordable cost.

Bass

A liquid cleaner designed specifically to remove dirt from the surface of bathtubs and showers. To achieve the desired cleansing result, this substance should be used according to the following algorithm:

Important! To restore the shine of the surface, treat it with a special polish, which can be bought at any household chemical store.

Mr Chister

This tool is available in the form of a spray, which includes polymeric substances. They provide the following effect:

1. Antifungal effect.
2. cleansing property.
3. Antibacterial treatment.

Important! Before you clean the acrylic bath from limescale with this tool, carefully read the instructions that are indicated by the manufacturer on the package.

Acrylan

Cleaning composition, which is designed specifically for the treatment of acrylic surfaces. A product is produced in the form of foam, which is applied to the surface of the bath or shower.

Important! Particularly effective this remedy copes with contaminants such as mold, rust, soap solutions, fungal formations and limescale.

Folk remedies for cleaning

If for some reason you do not want to use household chemicals, then popular and time-tested products will come to your aid. folk remedies, for example, citric acid and acetic solution. You can use these substances in one of the following ways.

Method #1:

1. Dilute half a packet of citric acid in 1 cup of warm water.
2. Stir the resulting solution until the granules are completely dissolved.
3. Soak a soft foam sponge in the resulting product.
4. Treat the entire surface of the acrylic bathtub with the solution.
5. Leave the treated plumbing for 10-15 minutes.
6. After wetting the sponge again in a solution of citric acid, treat the contaminated area.

Important! To fully restore the appearance of the acrylic surface, the cleaning procedure must be repeated 2-3 times.

Method #2:

1. Fill the bath with water, the temperature of which does not exceed 20C.
2. Add 1.5 liters of solution to the water table vinegar or a pack of citric acid.
3. Stir the resulting composition until the active substance is completely dissolved.
4. Leave the plumbing in this state for 12 hours.
5. Drain the liquid from the bath.
6. Rinse thoroughly acrylic surface using running water.
7. Wipe the tub dry with a soft cloth.
8. polish the surface special composition household chemicals for acrylic.

Acrylic products have become very popular in the world of plumbing today. So, to replace cast iron and steel baths came lighter and more elegant acrylic bathtubs. To make it last as long as possible, you need to find out some subtleties and nuances about caring for it. The material from which such products are made has a number of features that form a number of advantages and disadvantages of acrylic bathtubs. One of the disadvantages is that it can only be cleaned by special means. How can you wash an acrylic bath?

Types of acrylic bathtubs

Depending on the manufacturing method, acrylic bathtubs can be of two types:

1. Extruded - made by heating a sheet of polymer to a certain temperature and giving it the desired shape using a press. Such baths hold their shape somewhat worse and require additional processing epoxy resin or fiberglass. Installed on metal carcass;
2. Cast - molten acrylic is poured into a special mold. The properties of such a bath are somewhat better than those of the previous one, but the price, of course, is higher. For better preservation, it is also treated with epoxy resin. But you can install it directly on the legs, without using a frame, but for this you need to be sure that the product is of high quality.

What is the reason for such popularity of acrylic bathtubs and how do they differ from cast iron ones?

Advantages

• low weight of the product - the average weight of an acrylic bath is 20-25 kg. In this regard, it is easier to solve the problems of transportation and installation;
• variety of forms and design solutions- acrylic allows you to create bathtubs of the most diverse, sometimes even very unusual, shapes;
• high thermal insulation properties- the water temperature decreases much more slowly - only 1 degree per half hour;
• hygiene - not affected by fungus and mold;
• ease of care - easy to clean, even with the use of simple improvised means;
• does not corrode - this is due to the fact that acrylic is a chemically inert material, and therefore the occurrence of rust is excluded, the enamel is not damaged;
• easy elimination small defects - small scratches can be removed with felt.

Thus, unlike cast iron bathtubs, acrylic retains heat much longer. Another important difference is ease of maintenance and the exclusion of certain types of pollution.

Flaws

When it comes to cleaning products, there are many questions. So, the disadvantages of acrylic bathtubs:

• low level of strength - any object that falls into the bath can damage it, up to the formation of cracks and holes;
• fear of high temperatures - high means a temperature of more than 150 °, but if the acrylic is of poor quality, then it can be deformed from hot water from the tap;
• intolerance to some cleaning products - requires special chemicals, cleaning powders are not allowed, because they leave behind traces of scratches;
• short service life - on average, polymer baths serve no more than 10-15 years. Usually, during such a time, the idea of ​​\u200b\u200bcarrying out a new repair is brewing, so you should not worry too much.

And in order not to spoil the acrylic bath with cleaning products, you need to know the features of caring for it.

In order to keep the bath attractive for longer appearance, it is important to follow a few rules:

1. After each use, wash it with warm water and a soft sponge.
2. After each cleaning, you need to wipe the bathtub dry.
3. Avoid contact of acrylic with acetone, chlorine, ammonia.
4. Do not soak clothes in the bath.
5. If you need to bathe a pet, use a bedding to protect the surface from the sharp claws of the animal.
6. You can wash an acrylic bath using chemicals a maximum of once every ten days, and aggressive detergents better to avoid it altogether.

Use gentle detergents for washing, so you will extend the life of the polymer.

With regular care, problems with the removal of contaminants will not arise, because acrylic has an excellent dirt-repellent property. And in order for the bath to shine after cleaning, it must be wiped with a piece of soft cloth.

Among the best means, intended for cleaning polymers, we can distinguish: Acryl Star, Bass, Cif, Mellerud, Triton, Ravak, Acrylan, Acryl Polish, Mr. Chister, Pani Vanna, Sun Clean, Tim Profi.

Cleaning methods and washing order

An important point when cleaning an acrylic bath: you can not work on a dry surface, this is fraught with damage to the polymer. Nessesary to use warm water and mild detergents. Great fit liquid soap, dish and shower gel. Rub with a hard sponge or, God forbid, wire brush is strictly prohibited.

What is the procedure for washing an acrylic bath?

• Cleaning agent must be applied to the walls of the bathtub and areas of visible dirt.
• Let it soak for five minutes.
• Rinse with warm water using a soft sponge or cloth.
• If dirt remains, repeat the procedure.
• Wipe dry.

There is nothing complicated in cleaning an acrylic bathtub, the main thing is to use the right detergents.

Cleaning with improvised means

When there is no suitable chemistry for the bath at home, you can use improvised means. One of these is wine vinegar. It works great on stains and rust. To clean an acrylic bathtub, you need to moisten a cloth in vinegar and apply it to the place of contamination, after a few minutes you can rinse it off. Similar in action is lemon juice or diluted citric acid.

You can also use ordinary soap or shower gel. For greater effect, you can fill the bath with warm water, dilute soap or gel in it and let it stand for a while. After we lower the water and rinse the bath, and then wipe it with a dry cloth.

Removing lime scale from water (water stone)

Dealing with this type of pollution is not as easy as with others. In order to effectively get rid of water scale without damaging the coating of the bath, you need to resort to one simple, but very effective way. This method is really very good, but it should not be used more than once a year.

1. Pour warm water into the bath.
2. Add a bottle of vinegar and stir.
3. After 10-12 hours, drain the water and wipe the bath with a sponge.
4. Rinse and wipe.

You can add baking soda to vinegar.

If it is not possible to wait such an amount of time, you can use special cleaning products or dilute citric acid 1: 2 in a glass. Then the solution is applied with a sponge to the limescale, wait about 10 minutes, then repeat the procedure and gently begin to wipe the smeared area. After rinsing with water. However, this method is unlikely to help if the layer of stone is large enough.

Rust

Acrylic doesn't corrode, but faucet rust stains are a serious threat to a bathtub. To avoid this problem, you can use the same citric acid. The surface of the bath treated in this way will remain snow-white throughout the week. As a preventive measure, clean with lemon once a month.

If the yellowness does not disappear, then you will have to use special cleaning products.

Disinfection

With acrylic baths in this regard, there are no difficulties, because the polymer is not subject to fungal infections and mold. But still, from time to time you need to carry out disinfection in order to protect yourself and your loved ones from dangerous bacteria. To do this, dilute in a filled bath disinfectant compatible with acrylic and leave for 10 minutes, this time is enough. Rinse the surface thoroughly with water afterwards. Now microbes do not threaten your health.

How to remove scratches

A huge advantage of cast acrylic bathtubs is the possibility of their restoration. If there is a scratch on the surface, it can be removed with the smallest sandpaper. And to restore the former shine, rub it with polishing paste.

If there are many small scratches, felt can be used. It is enough to wipe the damaged area with this material, and the bath will look like new again.

By adhering to elementary rules for the care of acrylic bathtubs, you can extend their service life for years. The main thing is to remember how you can wash an acrylic bath, as well as the regularity of cleaning, and then your bath will retain its shine and whiteness, and water procedures in it will only be a pleasure!