≡× MENU

• Repair
• Repair
• Interior Design
• About everything
• About plumbing

How to treat a tree from mold, fungus: how to choose a reliable means of protection. How to protect wood from fungus and mold

Almost everyone has experienced mold at least once in their life. It may appear on the walls, ceiling or in the seams tiles. Except that she spoils appearance rooms with ugly black, gray or greenish spots, mold is harmful to health. To get rid of it once and for all, it is not enough just to process those areas where it is visible, it is required A complex approach and the right choice of funds. The article will discuss how to remove mold with your own hands.

Causes of mold

Mold is a colony of microorganisms whose spores are present everywhere, even in space. And with the onset of favorable conditions for mold, microorganisms begin to multiply at a tremendous speed, forming foci in the form of spots. With high humidity, it appears on any material, be it wood, concrete, furniture, paper, food, etc.

Therefore, it is not enough just to deal with the mold that has formed, you first need to understand and understand the reason for its appearance:

• it can get into the house from outside on animal hair, clothes or shoes, food, etc.;
• as soon as such microorganisms get into a favorable environment for them, reproduction begins with high intensity and in just a few days you can find the first foci on various surfaces in the apartment;
• most often it is formed in rooms with high (more than 70%) humidity and insufficient ventilation. Is it a bathroom, toilet or kitchen. But, having appeared in one room, in the future it begins to spread throughout the apartment;
• Most susceptible to mold are apartments located on the first or top floors. In the first case, the cause of high humidity is the basement, in the second - the attic.

High humidity is provoked by the following factors:

• disturbed ventilation of the room;
• high humidity due to the large amount indoor plants and continuous operation of the air humidifier;
• in private houses, poor vapor and waterproofing of the insulation.

Tip: removing the visible focus of the fungus special tool, but without establishing the cause of its appearance, it will soon appear again. It is possible that it will remain in places inaccessible to visual inspection.

Eliminate causes of mold

• The roof is leaking. This is the most common cause mold growth on ceilings and walls.
• Lack of adequate air exchange. Need to design proper organization ventilation in the room or repair it.
• Weak lighting. The sun's rays have a detrimental effect on mold, therefore, if possible, it is worth increasing the intensity of daylight in a problematic room.
• Incorrect room vapor barrier. At the meeting warm air from the inside with cold, which can penetrate through the walls, condensation inevitably forms, which leads to the growth of mold. Recommended under facing material place a special vapor barrier membrane.
• The presence of foci of infection on the other side of the treated surface. For example, if mold has appeared on the ceiling, the cause is often a large amount of mold from neighbors upstairs or in the attic.
• If necessary, install special devices - air dryers. They remove excess moisture, accumulating it in a container that will periodically have to be poured out. In a room with dry air, mold growth is unlikely.

If there is a fungus in the shower, after use, leave its doors open and turn on the fan for 20 minutes.

Do-it-yourself mold removal

The damage from mold is obvious, therefore, at the first sign of detection, it is immediately removed. This will prevent adverse health effects and interior decoration premises. In addition, by removing it with minor lesions, the probability reappearance practically absent.

• Access to the treated area must be free. If it is in the bathroom, then remove all lines from a small room, if on the ceiling, then you need to take care of a stable support.

• If spores are found on a material with high porosity, then it will not be possible to completely remove microorganisms. Therefore, you will have to partially replace the material or throw it away (if we are talking about furniture).
• The hardest thing to clean is a painted or plastered wall. The area with mold will have to be cleaned with a metal spatula along with a layer of paint. Since the hearth itself can be located under decorative coating. At the same time, mold spores will be partially thrown into the air and settle on hands and clothes, so you need to work in things that you don’t mind throwing away later.
• Next, any agent for removing mold is taken and prepared for work (if necessary, mixed and poured into the sprayer).

Tip: you need to work in a high-quality respirator, not only because of the pungent smell of the antiseptic composition, but also because of the likelihood of inhaling spores. And this already threatens with more serious consequences with health. If the room has a window, open it and send a fan through it to blow the air out. Ventilation holes while closing.

• Now spray evenly over the entire damaged surface with a small margin at the edges. The site should be properly soaked with them. Further, depending on the manufacturer's recommendations, the agent is left for several hours or they immediately begin to scrape off the mold with a hard sponge. At the same time, it must be changed several times, otherwise the disputes will stick back.
• Even if visually the area seems absolutely clean, the antiseptic treatment is repeated again. But at the same time, they no longer clean it off, but simply leave it (if contact is not expected with this area). At this time, it is advisable to turn on the heater or open the window.

Removing mold in the basement video

Folk methods for removing mold

These are the means and methods that have been used for decades to combat mold in residential premises. These are the most affordable and cheapest options, but not always effective enough. Therefore, it is often necessary to try several options until you achieve the desired result.

Bleach

• This is the usual concentrated white that is in every hardware store. Its composition is so active (sodium hypochlorite) that it can cope with almost any kind of mold in an apartment or basement.
• Whiteness completely destroys mold spores and increases the resistance of the treated surface to repeated reproduction of the fungus on it. But this applies to smooth materials such as glass or tiles. From porous surfaces, such as OSB, wood or plasterboard, bleach will clean the mold only from the surface, without penetrating inside. Thus, part of the microorganisms will remain intact and after a while they will begin to multiply again.

• The disadvantages include its aggressive chemical composition, which can spoil the appearance or harm the quality of the cleaned coating. And when working, a sharp toxic odor is released, which, if inhaled, can cause dizziness. Work with such a tool is allowed only in a well-ventilated area.
• Before starting work on removing mold with your own hands, you need to put on protective equipment: gloves, goggles and a respirator. In case of severe mold damage, whiteness can be diluted with water in a 1: 1 ratio. But the recommended proportions for processing tiles in an apartment are 1 part bleach to 10 parts water. You need to apply evenly, it is most convenient with a spray gun or a spray bottle, but a plastic bowl with a sponge will do. If the surface to be cleaned will not have direct contact with people in the future (for example, the ceiling), then after application, the solution is not washed off.

Bura

• Unlike bleach, borax does not emit toxic substances and does not enter into chemical reactions followed by hazardous fumes. It is a natural product that does an excellent job of removing mold in homes. Most often, borax is used to clean and deodorize drainage systems. For work, you need to prepare an aqueous solution of borax.
• First, the surface with mold is mechanically cleaned to reduce the number of spores. Then a solution is prepared by mixing borax with water in a ratio of 100 ml / 1000 ml. It is applied to the mold and with a stiff bristled brush they begin to clean it off. Excess moisture is removed and left to dry. After that, the remaining mold is cleaned with a dry cloth, while the borax solution itself is not washed off. He will create protective film, which will become an obstacle to the reproduction of the fungus in this place.

Vinegar

• Even concentrated acetic acid will not be able to cope with all types of mold. But it is a natural bleach that is non-toxic and does not pose a risk to human health if inhaled.
• Apply it with a sprayer or sponge without diluting with water. For best effect, after spraying it is left for an hour. Then rinse with plain water and leave to dry. At this time, it is advisable to ventilate the room, as the smell is very pungent and can remain in a closed room for several hours.
• Vinegar can be used as prophylactic by treating the surface with it every 2 weeks.

Ammonia

• Most effective for mold removal smooth surfaces, for example, from glass or tiles. But on more porous substrates, such as drywall or wood, it will not completely remove the fungus. In addition, everyone knows that ammonia has a very pungent and toxic odor.
• Even when mixed with water in a 1:1 ratio, the discharge is very strong and it will work only in a high-quality respirator. When applied to the treated area, the composition is left for 4-5 hours. After that, wash off with water. Often, professional tools made on the basis of ammonia, in this case, you need to follow the recommendations on the package.

Hydrogen peroxide

• At its core, it's antibacterial and antifungal, so it's great for removing mold. It is often used as an alternative to chlorine-containing compounds, primarily because it is absolutely safe for humans and environment. This effective method remove fungal formations from almost any surface: tiles, furniture, sanitary ware. But before use, it is recommended to check it for small area to make sure that the peroxide does not leave stains or streaks.
• The pharmacy sells peroxide 3%, it does not need to be diluted with water, but immediately sprayed onto the mold. The area to be treated should be wetted properly and left for 15 minutes. After that, all dirt is removed with a brush and washed with water. For the best effect, you can mix peroxide with vinegar in a 1: 1 ratio. Store the solution only in a container Brown or in a dark place.

Baking soda

• It is one of the most common household cleaners. It is safe and absolutely harmless, but also suitable for removing mold. With strong pockets of mold, it must be used together with vinegar.
• In 250 ml of water, stir a tablespoon of soda and pour into a spray bottle. Spray on the affected area and leave for a while. With the help of a hard sponge or brush, everything is cleaned and rinsed with water. Then again apply the same composition with soda and leave to dry completely.

• You can do it even easier and put the required amount of dry soda on a piece of cloth moistened with water and wipe the mold with it.

Tea tree oil

• As the name suggests, it is natural and absolutely safe remedy to fight mold. It is quite expensive, but it will take very little to remove spores. This essential oil with antibacterial and antifungal activity.
• To work, you need to dilute only 1 teaspoon of tea tree oil in a glass of water and spray the moldy surface with the resulting solution. If necessary, the procedure is repeated after drying, it is not necessary to rinse the treated area with water. The scent is strong, but it dissipates pretty quickly. The prepared aqueous solution can be stored long time in a dark place.

grapefruit seed extract

• Also an expensive drug, but safe, natural and very effective in the fight against mold. First of all, it is valued for the complete absence of an unpleasant or strong odor. Grapefruit seed extract destroys all microorganisms and additionally disinfects the treated surface.

• It is sold in a very concentrated form, so only 10 drops are required for 250 ml of water. After application, the composition is not washed off. If it is necessary to carefully remove a large focus, spraying is repeated. right amount once. Ready solution stored for a long time.

Mold Removal Chemicals

In hardware stores, you can find a wide variety of do-it-yourself mold removers. But before buying, it is recommended to read the reviews. So, users have identified the 5 most effective chemicals to combat the fungus.

Dali (Dali)

• This is a universal antiseptic composition. domestic production suitable for any surface: wood, concrete, brick, tile, paint, plaster, paper, varnish, etc. The price for a volume of 0.6 liters is approximately 150-200 rubles.

• Destroys not only all types of fungal spores and molds, but even algae and mosses.
• It has a very sharp and toxic smell, so you need to work not only with gloves, but also with a protective mask and respiratory bandage. To achieve the ideal result, one application is not enough. You will have to repeat it 2-3 times within 2-3 weeks. But after use, the mold does not reappear.

Alpa (fongifluid alpa)

• Same Russian composition based on antifungal and anti-mold components. It is universal for both internal processing of the room, and for external, for example, the walls of a house or an unheated basement. When used on painted surfaces, it does not change their color. This active fungicide is sold ready for use and is consumed at the rate of 1l / 5m2. The price of a bottle of 2 liters is 600 rubles.
• Before applying to a highly porous surface, it is recommended to pre-sand it. This will ensure a deeper and more uniform penetration of the composition. For application, both a sprayer and a regular sponge or roller are suitable. After work, it is enough to rinse them with plain water.

• Fongifluid can only be used at temperatures above +5˚С.
• When folk remedies do not help, it is better to use more potent ones. Apply it to and around the affected area for greater confidence. After application, the mold will self-destruct for several days. After a week, the treatment can be repeated if the result is not completely satisfied.

Olimp Stop Mold

• An excellent tool for removing mold in the bathroom, in the basement and even in the greenhouse. Due to the fact that it does not contain toxic substances, it is safe for humans and animals. Suitable for all types of surfaces, from concrete walls to plasterboard partitions.
• The product is applied according to the instructions on the package, and left for 2-3 days. After that, just wipe it with a dry cloth. It is advisable to immediately repeat the procedure. If the room is constantly wet, then for prevention, treat once every 3 months.

Biotol spray

• Designed to remove mold in the kitchen, in basements, on balconies. Also suitable for outdoor work. This biological antiseptic is safe as it does not contain chlorine. The cost of a can of 500 ml is 250-300 rubles.

• Before starting work, the infected surface must be prepared. mechanically clean the walls from mold. It is most convenient to do this with a scraper or a narrow spatula. If you rub with a brush or steel wool, the spores will be released into the air and subsequently settle again. All utensils that cannot be taken out of the room are covered with a film.
• The agent is applied through a sprayer and left for several hours. After that, it is wiped and washed with water.
• If the area to be cleaned is located in a highly humid room and has a large lesion, such as walls or a ceiling in a cellar, then the treatment will have to be repeated at least 3 times. For prevention, you can apply the composition every 6 months.

Mavix-Bio (Mavix-bio)

• Quite expensive antiseptic complex drug, average price for 1 liter - 600 rubles. This universal remedy copes equally well with all types of mold and fungi.
• It has three components. First, the surface is treated with special impregnation 2 times and left to dry. The active antifungal agent itself is applied on top and left for the required time (it is individual and indicated on the package). After that, the mold is cleaned with a sponge.
• The final step will be the spraying of the water repellent. It not only improves waterproofing qualities material, but also retains their vapor-permeable properties.

Mold on the wall of the house is by no means a rare occurrence. For many centuries, the owners of wooden buildings have been constantly faced with this scourge, and there are dozens of methods to deal with it. What are the causes of mold and how can it be prevented?

Causes of mold

Any type of mold is a colony of microscopic fungi that are ubiquitous. Once spores enter suitable conditions, rapid growth begins, as a result of which a wooden building can very quickly become uninhabitable.

Mold on the walls wooden house grows deep into the wood, as a result, it gradually begins to collapse. In the process of life, the fungus makes channels in the tree, into which water will begin to enter, which will later lead to decay.

Mold on the walls in a private house is dangerous not only for the building, it can cause significant harm to the inhabitants. Mold spores cause allergic reactions and respiratory diseases up to bronchial asthma. Will stand indoors bad smell, and very soon life in the house will become unbearable. The main reason why mold appears on the walls in a new house is errors in the design of the ventilation and heating systems. If air and water vapor stagnate in the room, high humidity will create ideal conditions.

Some fungi can grow well even at 0 degrees, and if the room is warm, growth will only accelerate. Because of this, there is no single answer to the question of how to remove mold from the walls in the house. First of all, we will have to eliminate the cause of the formation of the fungus, and only then it will be possible to remove it from the walls.

The main types of mold

If there is mold on the walls at home, what should the owner do? Control measures will depend on which mold has become an uninvited guest in your house. There are several types: Mold can have a brown or greenish color, but in any case it is easy to notice. The problem is that it becomes noticeable only when the fungus forms a large colony, and then it is already quite difficult to fight it.

Mold Control Methods

How to remove mold from the walls in the house? First of all, you need to find out the reasons for its appearance: most often it is insufficient ventilation of the room. If plastic windows are installed in the house, and the building has been carefully insulated, natural air exchange may be disturbed.

In this case, the question of how to remove mold from the walls of the house will definitely arise: the room will always be stuffy and humid, and the risk of mold in the bath is especially high. How to remove mold and fungus from the walls of the house? There are a few effective methods wrestling:

1. Solving ventilation problems. in the house with plastic windows it is necessary to install special fittings for micro-ventilation or open windows regularly to ensure normal air exchange.
2. Treatment of walls with fungicides. These are special substances that kill the fungus, with their help you can stop the growth of the colony and protect the wood. It is necessary to treat with a special solution not only the affected areas, but everything wooden elements: This will get rid of the spores and prevent re-infection.
3. Mechanical mold removal. During grinding mold fungus completely cleaned with upper layers wood. At the same time, it is important to prevent the spread of spores throughout the house, so the work must be carried out carefully.

If there is mold on the walls in the house, how to get rid of it folk methods? There are several proven ways experienced gardeners have been using for many years. One of them is the treatment of walls with vinegar.

This is a natural fungicide that can completely kill mold and prevent the formation of spores. table vinegar sprayed onto the surface of the walls, while it is important that the treatment is as complete as possible. The disadvantage of the method is an unpleasant odor, which, however, will quickly disappear.

There is another option: you can prepare a solution from grapefruit seed extract, which can be bought at a pharmacy. Sometimes tea tree oil is also used.

It is often necessary to choose methods of combating mold more than once. Only the patience and perseverance of the owner will help him cope with this scourge.

Wood widely used in construction natural material. It is actively used even in present stage, and the results tend to look very unusual and quite beautiful. But this is only until mold appears on the tree, more precisely on wooden structures. From this moment all troubles begin. What to do in this case? How to remove mold from wood? It is worth finding out more about this.

What types of fungus can threaten wooden surfaces in a chicken coop, basement or private house:

Once you have determined which fungus is threatening the integrity of your wood structures, take action.

Video "Ways to fight"

From the video you will learn how to effectively deal with mold on wood.

Fighting methods

How to get rid of mold in the chicken coop and other rooms? There are many ways to do this. Modern market such products are represented by a wide variety purchase funds. There is no special technology, but it all depends on the manufacturer. In any case, before use, you only need to read the instructions, and then follow the key requirements.

With a fungus in our country fought in ancient times. However, at that time it was not known how to remove mold from a tree, so the houses affected by the fungus were simply set on fire. At the present stage, people are well aware of the main causes of this kind of problem in the house, but still have difficulty correcting the situation.
It is best to prevent the creation of a favorable environment for these pests. That is, in the room it is necessary to ensure constant air circulation, as well as a low level of humidity. All this together will make your wooden crafts less attractive to mold.

Folk remedies

How to effectively remove mold from various wooden surfaces? To do this, it is not necessary to spend a lot of money on the purchase of expensive professional mixtures and preparations. It is enough to arm yourself with effective folk remedies. These include:

If you want to quickly get rid of a problem such as mold, but there is no way to spend decent amounts on a purchase chemicals, prepare a mixture of ingredients that are at hand. Treating wood with mortar baking soda, salts with boric acid or tea tree oil may not completely remove the mold, but it will help solve the problem in many ways. In addition, such solutions can significantly enhance the effect of purchased drugs.

Modern compositions

Of course, it is recommended to treat wooden surfaces from mold using special modern formulations. According to the method of application and exposure, three main groups of chemicals can be distinguished:

The first two categories are the best option, not only because they are capable of as soon as possible rid your wooden products of the fungus, but also because they have a covering effect. They protect against moisture and are generally used as finishing materials extending the tree's lifespan. If your goal is to remove mold, it is better to give preference to special antiseptics.

Varieties of antiseptics

How to remove mold with synthetic mixtures? It depends on the tool you decide to purchase. Among the most popular antiseptics today are:

Right choice

The choice of antiseptics and other mold preparations is quite diverse. What product will be the best option for processing wood, for example, in a chicken coop?

It all depends on the level of humidity in the room, the presence or absence of contact wooden structures with the ground, the air temperature characteristic of your home, as well as the direct purpose of wooden products.

For example, if the room is dry enough, it is not necessary to buy strong solutions, it is enough to treat the wooden surface with a paint mixture.

Carrying out work

Pre-protection

Material such as wood must be processed without fail even at the stage of design, manufacture, and construction of new structures. Only in this case, you can count on a sufficiently long service life of a particular wooden product. As a rule, the material is coated with special varnishes or paints, and it is recommended to do this on a dry surface. Thus, you will prevent problems due to increased moisture, and subsequently you will not have to remove the fungus from significantly damaged structures.

wood treatment

No matter where exactly the mold appears: on various cutting boards, on plywood, etc. Material such as wood can be rid of the fungus if the necessary measures are taken to initial stage until the mold has grown and completely penetrated the wooden products. Removing the fungus, for example, in the basement or in the chicken coop, in this case, includes several key points:

By adhering to certain rules for the care of a material such as wood and knowing how to remove mold in a timely manner, you can significantly extend the life of wooden furniture.

How to remove mold, fungus and insects from wood? This question is often asked by people when they want to preserve the aesthetic qualities of lining, timber, picket fence. The modern paint and varnish market is replete with all kinds of compositions to prevent the destructive influence of aggressive natural factors on lumber.

However, it should be understood that by buying an antiseptic for wood from moisture and decay, you will not be able to eliminate existing damage, destruction, blueness. Such funds are able to provide effective prevention and act on wood, like complex vitamins on the human body, increasing immunity and strengthening the structure. But the wood-boring beetles good antiseptic for wood against mold and fungus will destroy.

Which antiseptic to buy to remove mold from wood

The appearance of mold on a tree is already a disease, and it requires adequate treatment. Here you need an antibiotic bleach, which is suitable as a cheap chlorine-based NEOMID 500. Chlorine is the bleaching agent.

Photo 1. Protruding mold on a planed board

Apply the drug as follows:

• bleach is applied to the wood with a brush or vacuum sprayer and wait for the time specified by the manufacturer;
• when time runs out, the surface is polished;
• lumber is inspected for the presence of blue. If it still remains, the process is repeated;
• when the blue disappears, the wood is thoroughly washed from chlorine efflorescence. If this is not done, then subsequently the paint will become stained and its color will be distorted;
• at the end, dried boards or logs are treated with a prophylactic antiseptic.

Photo 2. How to properly apply bleach to wood

If you are willing to invest in an expensive antiseptic to remove mold from wood, we recommend buying a two-component bleach based on hydrogen peroxide, which is gentle and does not leave efflorescence. For example, Renner two-component hydrogen peroxide bleach, which is suitable for use in wet rooms, including baths. The substances included in the product are safe for humans. So, we found out that to remove mold and mildew, you only need to buy bleach.

Photo 3. Board after bleaching

Antiseptic for wood

To destroy woody pests, you should choose an antiseptic deep penetration solvent based. Such products are not diluted with water, have a pungent odor and are not used for internal works. In the online store catalog "LesoBirzha" you can buy an antiseptic for the preservation of a wooden house for the autumn-winter period Teknos GORI 605.

Photo 4. Removing mold with Neomid 500

The beetles themselves are not so dangerous for the tree as their larvae, which appear from eggs laid in the pores. The larva can live from 5 to 17 years, and one beetle in a clutch can leave up to 300 eggs! The scale of the alleged defeat is impressive. The larvae are always in the body of the tree, and outside they appear already as beetles. That is, when the presence of insects is detected, the volume of destruction of wood is already significant. That is why it is extremely important to do prevention, and not solve the problem when it has already declared itself. Structural elements should be treated with an antiseptic before the start of construction work.

Antiseptic for wood against moisture and decay

At high humidity, rotting of wood occurs - a process accompanied by delamination of the fibers. Rotting wood is a breeding ground for pathogens that infect the human respiratory system, resulting in the development of very dangerous and even fatal diseases, such as pulmonary tuberculosis. The most effective way to solve the problem is to prevent moisture and decay of wooden structures and finishes.

Photo 5. Antiseptic for wood from moisture and decay

For outdoor use, deep penetration primers are recommended, which include alkyds - chemical substances having a very small molecule. It is its size that determines the ability of deep impregnation into the structure. The substance at the molecular level combines with wood, forming a hard root and preventing moisture absorption.

Mold is a microscopic harmful fungus. They appear at high humidity in the room and actively multiply in wood, paper and other porous materials. On such surfaces, the fungus appears first.

Getting rid of mold is quite difficult. Its spores are very small and light, so they spread freely through the air and under conditions of sufficient humidity and warm temperature in the house, as well as poor ventilation, can infect the entire room in a fairly short time.

The appearance of even a small spot of rot on wooden objects, walls and ceilings of the house can threaten big problems if the fungus is not eliminated in time. Black mold on a tree grows very quickly and in just a few it can cover the entire product. At the same time, the wood darkens, becomes softer and collapses very quickly. If the fungus has struck the floors of the house, this can threaten not only the distortion of the structure, but also the complete collapse of the building.

In addition, the fungus in the house is also dangerous because it can cause serious problems with health. Mold spores entering Airways, cause poisoning of the whole organism. They also cause problems with the lungs, and can lead to asthma and allergies in residents. People in a house with black mold often suffer from rhinitis, which is very difficult to cure, as well as migraines. In rare cases, it may even develop oncological diseases. In addition, when a person stays in contact with a fungus for a long time, all vital functions are affected: a person becomes lethargic, irritable, immunity is gradually suppressed, and susceptibility to many other diseases appears.

How to get rid of mold in a wooden house

• The first step is to eliminate high humidity indoors, as this is the main reason for the formation of mold;
• You should also provide good ventilation and inflow fresh air, since it is detrimental to the fungus;
• After that, you can remove the mold from the tree. It's best to remove it grinder or other special power tools. If nothing like this is available, you can try to scrape off the rot with sharp knife or clean the fungus from the wood with a metal sponge or a stiff brush;
• All the chips that remain after this must be burned so that mold spores no longer spread throughout the house;
• The cleaned surface should be thoroughly rinsed with a solution detergent, after which it will need to be dried well for at least two days;
• After all these activities, you can begin to treat the tree with antiseptics.

How to remove mold from boards

Now in hardware stores you can find a large number of various antiseptic agents for fungus, differing in scope, material and composition. Exists huge selection preparations and solutions for furniture, boards and floors of houses. Before choosing a tool, you must first decide on all the parameters. This is necessary in order to choose the most suitable antiseptic that will help remove mold in the house.

In addition to using purchased products, you can also get rid of the fungus with folk remedies:

The most correct solution is to treat the surfaces with hydrogen peroxide. It's cheap and very available remedy is very effective in fighting rot. Peroxide has antibacterial properties, but it is completely non-toxic and safe for humans, which allows it to be used indoors. To remove the mold, pour the affected surface with a solution of 3% hydrogen peroxide for a quarter of an hour, after which you need to carefully remove the remnants of rot with a brush. Then it remains to dry the wood thoroughly.

It is worth remembering that hydrogen peroxide can discolor the treated material, so it is best to test its properties before using it on a small area of ​​\u200b\u200bthe tree.

Another good remedy against rot - borax. It also does not emit substances harmful to humans, so it is actively used in the fight against fungus. In order to get rid of rot, it is necessary to treat the surface of the tree infected with mold with a solution of borax in the proportion of 2 liters of water per 1 tbsp of powder. After that, you should wipe everything dry. The main thing is not to wash off the applied antiseptic so that it continues to protect against the fungus.

You can also remove mold by wiping it with baking soda. To do this, moisten a small piece of cloth with water and soak it in soda, and then rub the wood well with it. Soda will help not only get rid of the fungus, but also remove the smell, and also absorb excess moisture.

Tea tree and pine essential oils or grapefruit seed extract also have an excellent antiseptic effect that fights fungus well. In addition, this method of processing wood significantly increases its service life, since the oil covers the surface with a protective layer and helps to preserve the structure of the tree.

Another well-known and proven way to remove mold is to process everything with drying oil and glue. Such a composition will protect the tree from rot for a long time and will not allow it to collapse.

Chlorine bleaches are also very popular in the fight against fungus, but they must be used very carefully. It is best to wear rubber gloves and goggles to avoid injury to your hands and eyes. There are also oxygen bleaches. They are harmless to clothing and odorless, so the solution of this product can simply be sprayed with a spray bottle on the affected surface, and then removed with a stiff brush.

You can also kill the fungus with ammonia by flooding the surface with it and leaving it for six hours. After this time, you can clean the wood with a brush or a metal sponge.

• Never mix bleach with ammonia, since the combination of chlorine and ammonia releases a very toxic gas.

Experts advise not to use home methods, but to use proven antiseptics purchased in hardware stores. This will provide a guarantee of quality and will completely get rid of the fungus.

If the affected area in the house is too large, you should not try to cope with the mold yourself, but should turn to professionals as soon as possible. They will help prevent further destruction of materials and quickly and efficiently get rid of mold.