Hanger with their own hands from birch. Wall hanger in the hallway for clothes. Ideas how to do it yourself. Hangers for children's clothes
How to do wooden hanger with your own hands? It's very simple, we'll show you how. It would seem, what is a hanger in the house? Almost no one notices it, although it is quite a weighty and functional item. You will be surprised how you can improve it, and even make it yourself. Special skills are not required there, so anyone can do it.
Materials for work: what kind of wood to make a hanger
Depending on the type of hanger, we may need different materials for work. There is a general handy list that will be useful enough for any of the jobs in this category.
The arsenal of tools looks something like this:
- The material from which the hanger is made.
- Self-tapping screws.
- Screwdriver.
- Saw grinder, with which you can cut the desired parts of the hanger.
- Dowels, if the structure is wall-mounted.
- Screwdriver or drill (best electric).
- Level, tape measure, pencil.
- Sandpaper for surface cleaning.
- Hooks.
Do-it-yourself outdoor wooden hanger
Wooden things have always been of high quality and durable, as well as useful in everyday life. This also applies to hangers, so we will now try to build a wooden floor hanger with our own hands.
This work will not take us much time. It will take approximately 20 free minutes, as well as all the necessary materials.
For creating floor hanger from wood we need:
- Six knees (copper).
- Four tees (copper).
- Four plugs (must be the same inlet diameter).
- Wooden round stick of the same diameter. The total length should be 5.3 meters, cut into pieces: 2 pieces of 125 cm, two more of 70 cm, 4 parts of 20 cm, and the last 6 pieces of 10 centimeters each.
The workflow is very simple. Following the drawing plan, we must assemble all the structural elements. To facilitate the task, they are marked in the figure with letters.
- "A" - 125cm.
- "B" - 70cm.
- "C" - 20cm.
- "D" - 10 cm.
To further secure our floor hanger, use wood glue. Copper inserts will look interesting, which, on the one hand, will attract attention, and on the other hand, will be quite strong in operation.
DIY wooden hanger
An integral part of any corridor, as well as an item that is simply necessary in every apartment.
You can build a wall hanger yourself using all the necessary tools. The material option can be different, wood is the best of course. In the "cheaper" option, you can use chipboard.
Among the tools that we will definitely need are:
- Screwdriver or screwdriver.
- Drill.
- Drill set.
- Roulette with a pencil.
- Hooks.
It is done very simply - just measure the desired distance and drill hooks to the board, and then hang the finished hanger on the wall. But there is more interesting options such crafts.
Wall hanger made of hammers
In this craft, we will need everything the same as in the previous version, only instead of hooks we will use old hammers, from which we will need to cut off the handle, leaving a short end, which we will attach to the board.
Progress:
The approximate period of time for which it is realistic to make a wall hanger is about 2-3 hours (this is together with a shelf).
Extraordinary ideas for a wooden hanger
Floor and wall hangers are considered some of the classics, but when you're in the mood for something out of the ordinary or creative, you can consider the following design options.
Master class "Hanger made of real wood"
By the word "tree" is meant not only wooden material(board), namely pieces of real natural wood. Oak chocks are best suited for this work, perhaps even with knots that will serve perfectly instead of banal hooks.
Progress:
The hanger will undoubtedly attract attention, as well as brighten up the boring atmosphere of the room. Most often, this option is placed in country house or in the country, less often in apartments or mansions.
Photo of wooden hangers in the interior
As you can see, you can make a wooden wall or floor hanger - for clothes or jewelry, for children and adults, for a dressing room or for a hallway. It could be both classical and some unusual hanger from wood - from skis, hammers, old things, a fence or doors, from pallets and so on. The main thing is to connect your imagination, and for inspiration, I suggest looking at photos of various wooden hangers that you can make yourself.
We can conclude that there are a lot of options for hangers, as well as ideas for their implementation, and each of them is unique in its own way. Therefore, choose which of the ideas is best suited to your home and start making your own masterpiece. Drawings and improvised materials will help you with this. The main thing to have original idea and the mood to embody it.
Click Class
Tell VK
wall hanger in the hall - important element storage of things. The layouts of many apartments have narrow corridors, in which it is not always possible to place a full-fledged closet, so the owners are looking for alternatives. I want to keep the design of the apartment, comfort and ease of use.
There can be a lot of variations of hangers from the most standard and simple miniature shelves to futuristic and most unthinkable ideas.
The most popular materials for making hangers are wood and metal.
forged metal hangers amaze with the beauty and smoothness of forms. They are used in Provence and Art Deco interiors. This version of the hangers is mounted on self-tapping screws, and more often hung on them. 
This option of hangers can be attributed to horizontal. Their function is only to store outerwear. Metal hangers often have an aged look, which gives them a picturesque look.
A very interesting option is the combination of forged elements and leatherette or fabric. Looks unusual and luxurious. Such a hanger will decorate any corridor and become its highlight.
The photo shows combinations of materials: wood with fabric and metal with fabric. The functionality and originality of products is preserved. In the first version, the wood gives an array and solidity to the furniture, and in the second, metal facilitates the composition and gives grace.
Hangers made of wood can be combined with a mirror, a shelf for shoes or for head appliances. The photo shows a very compact version hallway.
The hanger can have sections: for short and long top things, which helps prevent dirt on the wall.
Hanger made of wood is understaffed with a shelf and a mirror, also great option for small hallways.
When choosing a material, it is necessary to focus on its strength, whether it will withstand ready product heavy winter things.
For this function, you can strengthen the mount: use not only self-tapping screws, but also furniture corners.
Materials can complement each other, carrying their functions. Metal, as more durable, goes to the basis of the structure, and wood as decorative elements.
Ideas for hangers in the hallway from improvised materials
I picked up a lot of ideas when the hanger was made with soul from improvised materials. This can serve as inspiration for many families. I think that in the interior it is necessary to move away from stereotypes, because any design is unique with its non-standard solutions.
In the photo, a completely ordinary hanger from a piece of board is made in nautical style. The matching backdrop and anchor hooks add color to the entire hallway.
An interesting forged lightweight option, perhaps not entirely from improvised materials, but it has a place to be. A very functional and elegant option, it contains a stand for shoes and hats.
Connected in the form of rhombuses, slats with wooden hooks, it looks very eco-friendly and stylish. Placing the hooks at different heights allows you to hang a lot of things without creating an untidy pile.
Curved leaves made of thin aluminum decorate the walls in a peculiar way. And it will be very easy to make such a hanger at home. To do this, you can buy a sheet of thin aluminum in hardware stores. This material is easy to cut and quite malleable.
Pallet hanger - the most affordable and modern version hallway decor. Creates a loft atmosphere and is suitable for non-standard young people.
And, most importantly, it is completely environmentally friendly and strong material. With the help of corners and self-tapping screws, you can build both a shoe rack and a shelf. You can simply coat the pallets with varnish or stain, then a beautiful wood pattern will remain, or you can paint over with thick colored paint to match the overall tone of the interior.
For minimalistic designs, the hanger in the photo is just a godsend. Comfortable, without unnecessary details and looks very stylish. A rod is inserted inside, which allows you to make hangers out of the hanger.
I will give a small master class on making hangers from wooden coat hangers. It turns out two rows of hooks. The option is unusual, but very functional.
Having slats of different widths, you can create the simplest option furniture by simply drilling hooks and adding crossbars for fastening.
For nature lovers, images of animals and birds can be used, and an artificially aged wooden product will add history to the corridor.
An interesting combination of two materials: wood and metal. Modern compact hanger with built-in hooks.
Many times I have come across the ideas of cutlery hooks: forks and spoons, as in the bottom photo.
An interesting option for a plastic hanger for a small family. IN summer period can only serve as decoration.
DIY wooden wall hanger
To make a hanger, you need to take a few boards, either ready-made or bought in a store. You can use any wood: pine, oak, birch.
We will analyze two options for hangers.
We cut out the same sidewalls, the top and the middle crossbar, to which you then need to attach the hooks.
We cut out beautiful bends on the sides and skin all the details.
We connect into a finished structure with self-tapping screws, furniture corners.
We mark places for hooks and drill them.
We check the finished product for strength and varnish it.
You can make an even simpler version of the clothes hanger.
The photo shows the diagram and dimensions of the future product.
We take purchased boards or lamellas, in this case pine wood was used.
We measure out same distance between the vertical parts and from the wrong side we fasten the frame. We drill any fasteners. The shelf will be hung on self-tapping screws.
We attach hooks to the front side at the same distance from each other. And we admire the result.
This hanger model can be supplemented with a shelf, to give contrasting colors. The photo shows an option when the crossbars do not go from the wrong side, but from the front.
Tell VK
IN modern apartments and houses hallways often have custom shape and dimensions, so skillful owners have a desire to make a hanger on their own.
The idea is attractive in that the design will best meet the needs of the interior of the room. At the dachas, country cottages a do-it-yourself hanger made of wood will also be in demand in the bathhouse and auxiliary outbuildings, where you can leave a working set of clothes, raincoats, capes, towels.
Board hanger
If you have imagination, make useful item the interior can be made from any material that is always in stock in country houses: boards, slats, planks, logs.
Note! You can use the remnants of old lumber or purchase new boards in specialized places where they will immediately cut to size.
The optimal thickness suitable for a wooden wall product is 3 cm. A small thickness will not provide sufficient strength, and a large hanger will look bulky.
Before starting work, you need to prepare the tool. If something suddenly turns out to be missing, it makes sense to buy immediately, in advance, and not run later in urgently, acquiring the first available. For work you will need:
- saw;
- plane;
- drill;
- screwdriver;
- tassel,
- varnish composition.
With any home creativity it is useful to have protective gloves for hands and an apron or work clothes.
Sample
First you need to translate the idea on paper, make an accurate drawing, taking into account the size of the boards and the specifics of the project. Then the resulting template should be carefully transferred to the boards and traced with a pencil. Product sketches are presented in large numbers in virtual sources, from which you can only take an idea or print ready template on the plotter, if one is within reach.
The most accessible and simple is rectangular shape. A more intricate wall base made of wood for hooks will have to be cut out. You should not choose too complex templates, especially for a novice master.
Cutting and grinding
After obtaining a contour on the workpiece, you can begin to cut it with a small jigsaw or saw. You need to work carefully so as not to crumble or damage the edges of the hanger. The resulting semi-finished product will have a rough surface, which must be sanded after moistening, directing hand movements along the wood fibers.
The length of the hanger varies at the discretion of the master; you can make a long design with a shoe stand located almost at the very floor. IN small rooms a shortened hanger is organic, under which a bedside table, shelves or an ottoman are placed.
Advice! The hanger made of wood looks beautiful, the edges of which are slightly rounded, smoothly varnished.
Rounding can be achieved by processing with fine-grained sandpaper. Masters with experience do not advise using special wire sold in stores for grinding, it is intended for other materials.
A well-prepared surface of a tree, when stroked with a hand on which a nylon stocking is put on, will not leave any hooks, it will create only pleasant sensations. If you felt any, then the job was done correctly, the tree can be varnished.
Coloring and varnishing
Any procedures with paint and varnish products can only be carried out with gloves.
The first coat of varnish should be uniformly thin, keep an eye on uniform distribution surface agents. Then wait for it to dry completely, after which the varnishing must be repeated.
The hanger is almost ready. If you wish, you can burn out a decorative ornament or pattern on some parts before the varnishing stage. If necessary, complete the work in a short time, purchase finished decor from thin plywood, stick it on the surface of the tree.
For complete harmony with the interior of the room and to meet functional needs, you should think in advance what will be better in your case - varnishing or paint. Available for sale huge selection paint and varnish compositions for wood, on which the operating conditions of the coatings are indicated. Familiarize yourself with them, apparently, the product for the bath should not be varnished, but it is better to paint it. A hanger for the hall in the house will look great in a lacquered state, especially since the tone of the composition can be selected with precision to the nuances.
Hook options and wall mounting
The final stage is perhaps the most important, because the meaning of the venture is lost without hooks and secure fastening of the entire structure to the wall.
There are many possibilities for making hooks, ranging from a variety of ready-made products from metal alloys and wood to makeshift gadgets from stumps, metal staples, remnants of wooden clothes hangers.
If the wall hanger is planned to be used in outbuildings to accommodate garden tools, then as a set of hooks, a rake is sometimes fixed with the teeth up. It turns out powerful, reliable and durable.
The finished wooden structure is nailed or fixed on the wall with a drill or puncher.
The installation of any hooks, the final fastening of the hanger is usually easily done using ordinary tools (self-tapping screws, dowels, drills), sometimes universal glue may be additionally needed. After assembly, complete drying of the glue, make a trial hanging of the load with the maximum planned weight, watch the hanger. Surely the result will please you, the product will serve for a long time and reliably.
Hanger made of laminated chipboard
From prefabricated laminated panels or custom-cut plates, you can make designer furniture sets that include a hanger.
The principle of working with laminated chipboard is similar to the algorithm of actions with boards, with the only difference being that the laminated boards must be cut out very carefully, and then the resulting ends should be glued with a special tape.
If the edging of the ends is done inaccurately, the hanger on the side will have an unsightly appearance and will not be able to serve for a long time. In wet rooms the raw part at the edges of the panels can absorb water vapor and quickly deform.
End protection, made with a moisture-resistant self-adhesive tape, can prevent Negative influence environment, so the hanger will remain intact in any room.
floor version
In some hallways, on summer terraces, a floor hanger is suitable for guests in style. Its feature is mobility. This design can be rearranged to any convenient place and put things around it from all sides.
To make a wooden floor hanger with your own hands, you need to take care of its stability. Basis for original design can be picked up in the garden or forest, taking the root part of a suitable size woody plant. It must be thoroughly cleaned, polished, built over it with a frame of one or more holders with horns at the top. Working with author's models, reminiscent of the interior of hunting houses in the old days, is always difficult, but the result will captivate visitors with incomparably brighter decorative effect than the impressions of standard metal structures.
Ideas for making clothes hangers with your own hands: photos and drawings of hangers for the hallway. Varied Options making homemade clothes hangers.
You can make a clothes hanger with your own hands practically from improvised materials that are lying around at home idle. Craftsmen never cease to amaze with their ingenuity, here is a clear example of this homemade hanger for clothes from ordinary forks.
A similar version of a hanger made of metal spoons.
Pallet clothes hanger.
Here is a clothes hanger from a pallet, and again the old pallet was used. A wooden pallet is sawn into two parts from each half of the pallet, you can make a hanger, just paint the workpiece and attach hooks to the boards with screws.
Another option for a pallet hanger, here a whole wooden pallet, it is polished sandpaper, paint the boards in different colors and attach hooks.
Wooden clothes hanger.
Such a hanger is more suitable for a summer house or a bathhouse; wooden knots fixed in a wooden structure are used as hooks here.
Hanger made of metal profile and bars.
The design consists of several bars and metal profiles fastened together.
Wooden hanger with your own hands.
A wide board with imitation of a piece is used here. old wood, coat hooks are made of bars and fixed with screws screwed in with reverse side boards.
The wood is burned with a blowtorch, which achieves the original texture of the product, The final stage coat hanger with clear lacquer.
In this version, there was no carving work.
And in this design, instead of hooks for clothes, door handles which can also be painted.
An interesting option for hangers from boards.
Original homemade hanger in the form of a tree.
For manufacturing, thick plywood is used, the contour of the tree pattern is drawn and sawn out electric jigsaw. The design is painted and attached to the wall with dowels.
Hangers for children's clothes.
The details of the hanger are cut out of plywood with a jigsaw and painted with bright colors, so you can make a hanger in the form of animal figures.
Do-it-yourself outdoor clothes hanger.
The simplest version of a floor clothes hanger made of pipes, for manufacturing you will need a thin aluminum pipe 2–2.5 m long. The pipe must be bent, as shown in the figure, and the clothes hanger is ready.
Wall hanger made of pipes.
And this hanger consists of a picture on the wall, clothes hooks are attached with dowels directly to the wall.
Coming home, the first thing we do is take off our outerwear and hang it in a closet or on a hanger. The latter option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, and is suitable for corridors. various forms and sizes.
Due to the simplicity of the design, it is not at all difficult to build a hanger in the hallway with your own hands.
Advantages of self-production:
- H low cost of the product;
- IN opportunity to achieve the best combination with interior;
- AND individuality of the hanger: your friends and acquaintances will not have this;
- R academic work is highly valued.
Original wall hangers in the hallway are an important and integral element of the interior.
Before proceeding with the manufacture, you need to analyze the shape of the corridor. If it is elongated enough, it is better to give preference to a long hanger with compact shelves or no shelves at all. For large rooms, you can choose any model.
It is also worth considering the features of the interior: style, details, prevailing colors.
The simplest type of hanger is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden plank, as well as several smaller ones, fastened together.
In the traditional version, the wall hanger is a bar on which hooks and pins are located.
If you want to show your creativity, you can make a custom model. For example, an excellent hanger for a nursery will turn out if you create a blank in the form of a cloud, tree or twig. For the corridor, it would be better to cut out something else: horns, a fence or an inscription.
Wall hangers in the hallway and coat hooks are selected according to the style of the interior of the room.
Materials and tools
Now, in almost every hardware store, the buyer is provided with such a rich assortment that they can purchase everything necessary for a wooden hanger to be created by hand in as soon as possible, will not be difficult.
DIY wall hanger in the hallway - simple work happy with the result.
To do this, you should buy or prepare the appropriate tools:
- jigsaw
- Hacksaw;
- Blowtorch;
- Sandpaper;
- Screwdriver or hammer;
- Awl;
- Pencil;
- Roulette.
Tools to help you get the job done.
From the materials you will need:
- A piece of wooden board;
- screws;
- Hooks.
Materials for the future hanger.
For decoration:
- Primer;
- Paint brush or roller;
- Lacquer or other coating;
- Blanks for decoupage, scissors, glue, textured sponge.
Materials for decorating hangers.
hanger manufacturing process
A classic do-it-yourself hanger for the hallway does not require significant effort. Production takes a minimum of time. Initially, it is necessary to think over the design in detail, it is recommended to make a drawing on graph paper and calculate the consumption of materials.
You need to transfer the drawing with a pencil or marker.
Then you should get wooden sheet(or a board) and put it on stable supports so that a few centimeters remain between it and the surface of the floor or table. Armed with a jigsaw, cut out blanks of the required shape, observing the contour. If you want to make the edges embossed, you need to go through them with the same tool.
It is necessary to process the roughness, sand the cut points and sand.
Next step - giving the desired appearance. For firing the boards you will need blowtorch, which is successfully replaced by a gas burner. On this stage care must be taken not to injure the fingers, and not to spoil the material. Then you need to get paint or varnish and cover all the sawn parts.
After drying, the assembly of the product is carried out using screws.
The hinged method involves mounting small rounded metal strips, called "ears". Holes are drilled in them for fastening in dowels with screws. The reliability is determined by their length.
A DIY wall hanger can be fixed in several ways.
Another, no less popular way is to do through holes. After their creation and processing, screws or nails with a long leg are skipped and the hanger is attached to the wall.
For fastening, as a rule, screws or small nails are used.
To complete the work you need to attach metal hangers. You can arrange them randomly, in one or more rows.
It can be fixed with the following devices:
- "Suckers";
- adhesive strip;
- Magnets.
Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is suitable only for hats.
Any brave design options favorably emphasize the relevance and originality of the interior.
Making hangers from longitudinal and transverse boards
This design resembles a lattice, it involves the manufacture of a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, it is conditionally possible to distinguish two layers: the first- transverse, second- with longitudinal.
Drawing of a wall hanger with dimensions.
To create a wall hanger with your own hands, you will need to stock up on a few long boards. It is better to give preference to lumber with a width of 10-20 cm and a length of 1 m. Having decided on the size, you should get the required number of blanks.
How to assemble the hanger.
After that, it is necessary to process them so that there are no bulges, chips and roughness, giving Special attention edges. Then it is necessary to decompose first the first layer, observing parallelism and the same distance between the planks. If everything suits you, it's time to move on to the second level. Armed with a screwdriver (or, in its absence, a hammer), fix their position at the intersection.
A simple hanger option for self-production.
Hooks need to be attached to the top boards. If they have vertical position, then it is better to place the hooks in the upper part in one row. For a hanger, the outer side of which is formed by vertical planks, you can create several levels by attaching hooks to each of them.
Hanger dimensions with shelf.
decoration
You can complete the production by giving the product the original appearance. The most interesting surface will be if:
Before proceeding with the coating, the wood should be cleaned of traces of dust, dirt and grease.
DIY materials for decoupage hangers.
We need to prime our wooden hanger with white acrylic paint.
Glizale is a transparent paint that, with some effort, forms textured surface. Before starting work, you should dilute the glizal with water, according to the instructions. Then the mixture is applied to the prepared workpiece and a pattern is created using a textured sponge. It is necessary to act quickly, otherwise the coating will harden in half an hour. For artificial aging of wood, a type of varnish such as craquelure is used.
It is applied to a pre-painted surface, which as a result is covered with small cracks.
Decoupage allows you to create wooden crafts suitable for any interior. Most often they resort to it when they want to get furniture with the effect of antiquity and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.
Having cut out paper patterns, it is better to lay them on the surface, evaluate how they will look.
If everything suits- smear the wrong side with glue, attach to the tree and level it so that bubbles do not subsequently form, then cover with furniture varnish and leave to dry completely.
Which finish to choose is up to you. After the varnish has dried, screw the handles into place.
If you have artistic skills, you can draw a picture acrylic paints. Initially, the background and large elements are created, then the details are drawn. It is better to complete the work by applying varnish and craquelure.
VIDEO: Stylish hangers in the hallway.
