How to clean the kettle from scale at home. We remove scale in an enameled teapot. How to clean a kettle with baking soda

Scale appears due to contained in poor quality water impurities. During boiling, they settle on the walls of the kettle and spoil the taste of hot drinks. Also, scale does not conduct heat well, so a dirty kettle will boil longer.

How to clean a kettle with vinegar

The method is suitable for very dirty teapots made of plastic, glass, stainless steel.

You will need:

  • ½ liter of water;
  • 1 cup 9% vinegar or 2 tablespoons 70% vinegar essence.

Heat water in a kettle, and then pour in vinegar or vinegar essence and leave the solution for an hour. During this time, the scale will soften. Rinse the kettle from the inside with a sponge, boil again clean water and drain it.

How to clean the kettle with lemon or citric acid

The method is suitable for electric kettles made of stainless steel, plastic or glass with a moderate layer.

Not suitable for enamel and aluminum kettles.

You will need:

  • ½ liter of water;
  • ¼ lemon or 2 tablespoons citric acid.

Heat water in a kettle and put a piece of lemon or citric acid into boiling water. Leave the scale to soak for 1-2 hours. Rinse the teapot with a sponge and rinse thoroughly. After the first boil, the water will need to be drained.

How to clean a kettle with baking soda

The method is suitable for any kettles.

You will need:

Stir the baking soda in a glass of water so that it dissolves completely. Pour the resulting liquid into the kettle, add the remaining water and boil it. Wait half an hour or an hour and heat the kettle again.

Now you can wash the kettle and boil clean water in it. True, after it will have to be poured.

How to clean a kettle with soda

The method is suitable for stainless steel kettles heated on a stove.

Not suitable for aluminum, enamel and electric kettles.

You will need a bottle of any lemonade. The most famous option is cola, but it is better to use a colorless drink (it is important that the composition contains citric acid).

Let an open bottle of lemonade sit for 2-3 hours to eliminate gas bubbles. Then it's simple: pour the drink into the kettle and bring to a boil. Then thoroughly wash and rinse everything.

How to peel a kettle

The method is suitable for enameled and metal teapots with a weak layer of scale.

Not suitable for electric kettles.

You will need:

  • ½ liter of water;
  • skin 2-3, apples or pears.

Rinse the cleaning from dirt and sand, put them in a kettle and fill with water. Boil the liquid and leave to infuse for one to two hours. A light layer of scale will come off on its own, persistent pollution rub with a dishwashing sponge. After rinsing, the kettle will shine like new.

If you have a particularly capacious kettle, and scale has accumulated on the walls, take large quantity water than indicated in the recipes. The liquid must cover the contaminants completely.

How to keep the kettle clean for a long time

  1. Pour soft water into the kettle. If you don't buy bottled, use a filter. Or at least stand your tap water for a few hours to allow the impurities to precipitate.
  2. Boil water in the kettle no more than once. Better fill it fresh.
  3. Rinse the inside of the kettle at least once a day. And ideally before each use.
  4. For prevention, once a month, boil a filled kettle with one tablespoon of citric acid.

Naturally, after active use, the kettle over time acquires a layer of scale, which not only looks unflattering on the walls of a household appliance, but also gets into a mug of boiled water, and, accordingly, then into the human body. Here a completely fair question arises - is it necessary to get rid of this annoying scale at all, well, it’s present and okay! In fact, this phenomenon is harmful to humans, if you constantly use water with scale flakes, over time, you can earn stones in the genitourinary system, and it is also likely that osteochondrosis and gout may develop. Therefore, you need to get rid of this misfortune, respectively, today the site "Comfort in the House" will tell you how to clean the kettle from scale. We will tell you how to clean a regular kettle designed for heating on a stove, as well as their electric counterparts. By the way, we told earlier, come and study.

Lime scale on dishes is formed by boiling running water which is enriched with salts. After the boiling process, the salts contained in the water decompose into components, namely carbon dioxide and precipitation, which, in turn, are not subject to decay and simply settle on the walls of a particular dish, forming a plaque. And plaque, in turn, is a whole range of salts, substances harmful to the human body and insoluble metals.

Varieties of kettles prone to scale formation

Scale forms on containers designed for boiling water, respectively, these can be kettles designed for gas stove, electrical panels, as well as thermo pots and electric kettles. Kettles for the stove can be metal or enameled, and their electric representatives can be ceramic, glass, plastic or metal. The latter can be equipped with an open heating element (coil) or a closed one. An open spiral during the operation of dishes is capable of accumulating layers of scale on its surface, which is subsequently difficult to remove, but also electric kettles equipped with heating elements closed type are also able to accumulate plaque on the walls and bottom. So we can say with confidence that any dishes in which water is often boiled (on gas or on electricity), and which is not washed by hands as often as it is done with pots and other household utensils, can form growths on the walls.


How often should the kettle be cleaned?

Naturally, it all depends on the water you use, so let's say with filtered water, plaque may not appear very long time, but even in this case, it is better to clean the dishes every 4-5 months. If you use plain running water, without filtration, then it is better to clean the kettle once a month. For such periodic cleaning, it is very convenient to use citric acid in a bag. Just pour a tablespoon of acid into the kettle, pour water to the maximum mark and turn on the boiling mode.


How to descale a kettle easily and quickly

Cleaning the kettle with citric acid

The method is suitable for ordinary metal kettles for stoves and all kinds of electrical products.

Do not do it use in enameled teapots.

Advantages of the method: does its job perfectly, removes scale quickly and efficiently.

The disadvantage of the method is the fact that old multi-layer growths are not affected by acid.

How to carry out the procedure:

It is necessary to take a bag of citric acid, and pour its contents into the kettle. You can adhere to the calculation of 1 tablespoon of "lemon" per 1 liter of water. Pour water here and boil, after the first boil, you can leave the kettle with liquid to cool, and then turn it back on for boiling. It remains to pour out the liquid with floating plaque flakes, and rinse the product thoroughly under running water. If plaque remains in some places, you can try to clean it off with a sponge, use only the soft side of the sponge so as not to scratch the walls of the product. Well, now you know how to descale the kettle with citric acid, there is nothing complicated here.


Citric acid for cleaning the kettle.

Kettle cleaning soda

The method is suitable for all types of kettles (electric and simple).

Advantages of the method: affordable, safe for health, helps to get rid of old growths.

The disadvantages of the method: soda due to its abrasiveness can lead to scratches on the product.

How to carry out the procedure:

Pour baking soda into the dish you want to clean. You can adhere to the calculation of 1 tablespoon of soda per 1 liter of water. Pour in here cold water, put on fire or turn on the kettle in the network, wait for the water to boil. After boiling, leave to cool completely, turn on again to boil. After that, the water can be drained and walked over the surface with a soft sponge, then rinse the product thoroughly with running water. Here is the answer to the question - how to remove scale in a kettle with soda. Everything is very simple, fast and efficient!


Soda for cleaning the kettle.

We use potato or apple peels

The method is suitable for all types of teapots (metal, enameled, electric).

Advantages of the method: absolutely available.

The disadvantages of the method: will not cope with chronic growths.

How to carry out the procedure:

We place clean (washed) peelings of potatoes, apples or pears in the kettle, fill with water, and bring to a boil. Leave for 1-1.5 hours and drain the water, you can walk along the walls with a soft sponge. This method is suitable for removing a small plaque, you should not expect miracles. By the way, the process of descaling by this method consists in the separation of acids from cleanings.


Peeling a potato or an apple to clean the teapot.

Descaling with Lemon

The method is suitable for various electric kettles and ordinary metal ones.

Do not do it use in enameled products.

Advantages of the method: does an excellent job of removing plaque.

How to carry out the procedure:

We take a large lemon, cut it into circles, put it in the product to be cleaned, pour water here to the maximum mark, and boil it. If you are cleaning a stovetop kettle, you can wait for the boiling process, then reduce the heat and leave to languish for about 20-30 minutes. In the case of electric cookware, after boiling, leave the water to cool completely, then boil again and drain the liquid, rinse with water and walk along the inner walls with a soft sponge.


Lemon for cleaning the kettle.

Removing plaque in the kettle with vinegar

The method is suitable for metal and enamel teapots.

Do not do it use in electrical appliances.

Advantages of the method: after several cleanings, even old traces of plaque are removed.

The disadvantages of the method: pungent, unpleasant aroma, which also disappears for a long time.

How to carry out the procedure:

Pour water into the kettle, add vinegar here, you need to act at the rate of 0.5 cups of vinegar per 1 liter of water. We put the dishes on the fire and wait for the water to boil, in the process a pungent smell will appear, you need to be patient. After boiling, turn off the gas and leave the liquid in the kettle until it cools completely, then you can boil again and immediately drain the water. The walls can be cleaned with a soft sponge and, with special care, rinsed several times with running water. So we told you - how to clean the kettle from scale with vinegar, as you can see, there is nothing complicated, except that the aroma is not very pleasant, but the main thing is the result, right ?!


Vinegar to clean the kettle from scale.

Clean the kettle with baking soda and vinegar

The method is suitable for tiled metal and enameled teapots.

Do not do it apply to electrical products.

Advantages of the method: affordable and effective.

The disadvantages of the method: acrid, obsessive aroma.

How to carry out the procedure:

Fill the kettle with water, add soda and vinegar here. You should act at the rate of 0.5 cups of vinegar and 1 tablespoon per 1 liter of water. We put the dishes on the fire and bring to a boil, wait until it cools down, boil again and drain the water, walk along the walls with a soft sponge and rinse with running water. Well, you have learned how to remove scale in a kettle with soda and vinegar.


Vinegar and baking soda for cleaning the kettle. from traces of scale.

How to clean the kettle with soda - Sprite, Coca-Cola, Fanta

The method is suitable for different stovetop kettles.

Do not do it apply to electric kettles.

Advantages of the method: available and quickly removes growths.

The disadvantages of the method: beverage dyes can stain the product from the inside.

How to carry out the procedure:

Pour any of the listed sodas into the kettle, put the product on the stove, and wait for the liquid to boil. After boiling, turn off the fire, and leave the product on the stove for about 30 minutes. Next, pour out the liquid and walk along the walls of the dish with a soft sponge, then rinse it thoroughly with running water.


Carbonated sweet water for cleaning the kettle.

We use soda, vinegar, citric acid

The method is suitable for ordinary metal teapots.

Do not do it use in electric kettles.

Advantages of the method: effectively removes even old scale.

The disadvantages of the method: pungent smell.

How to carry out the procedure:

All cleaning will take place in three stages. The first stage: pour water into the kettle, pour a tablespoon of soda, boil, pour out the water. The second stage: pour water, pour a tablespoon of "lemon", boil, drain the water. The third stage: pour water, pour in 0.5 cups of vinegar, boil and drain the water. We pass along the walls of the dishes with a soft sponge. This method is ideal for old scale.


Soda, vinegar, citric acid to clean the kettle.

Use of chemicals

The method is suitable for all types of teapots (according to the instructions).

Advantages of the method: Great for removing old traces of limescale.

The disadvantages of the method: chemistry is chemistry.

How to carry out the procedure:

Of the most popular products, I would like to highlight Antinakipin, Topper, Cinderella and Top House. According to the instructions, pour water into the kettle, add a product to it, then boil the liquid once or twice, drain, and thoroughly rinse the dishes with water.

Chemical agents against scale in the kettle.

How to prevent scale formation in the kettle

  1. Avoid using hard water conventional faucet, it is better to install a faucet with a filter and enjoy purified water.
  2. Bottled water can be used as an alternative to running water.
  3. If it is not possible to install a filter, defend the water in a jar, and then pour it into the kettle.
  4. Pour out unused water each time, i.e. Before each boiling, it is better to pour updated water.
  5. It is necessary to rinse the kettle after each use, well, or before use.


Well, here we told you how to clean the kettle from scale at home, using completely available funds. You just have to choose a cleaning method for yourself, carry out the cleaning procedure for a conventional or electric kettle and enjoy the result!

The modern variety of teapots is amazing. You can't keep up with innovations: manufacturers are experimenting with materials, technologies, shapes and colors. To make the kettle last for a long time, it is advised to use spring, filtered or bottled water. And if this is not possible, defend the water from the tap throughout the day.

Why does plaque appear

Over time, scale will appear in any kettle. But increased water hardness will greatly reduce these periods and cause many problems. Firstly, scale is dangerous for the heating element. A spiral or a metal disk covered with a coating quickly overheats, loses heat transfer and, as a result, burns out. Secondly, boiling will require additional energy costs. Well, it is clear that water only from clean dishes will give coffee or tea a good taste.

Hard water contains calcium and magnesium salts in excess. Hardness is considered normal from 3 to 6 meq/l. White and dark spots on faucets, a sink or toilet bowl, clogged holes in the shower tube, whitish spots on washed dishes, permanent lime deposits in the kettle are sure signs of high water hardness (from 6 to 9 mg-eq / l).

Many people believe that installing a filter (jug, flow or reverse osmosis) will completely eliminate the scale problem. In fact, it will reduce the formation of plaque, but not by much. The action of most filters is not aimed at softening water, but at its mechanical cleaning from heavy metals and bleach.

How to descale a kettle: special chemistry

Before you remove the scale in the kettle, you need to remember: it is impossible to mechanically remove the already formed plaque. If you start scrubbing or scratching it with your own hands, ruin the device. Therefore, in our time there are many chemicals to fight scum. Basically, these are liquid or powdered preparations based on soda ash.

They all have an identical principle of operation: according to the indicated dosage, we fall asleep in a kettle, fill the device with water to the maximum mark and boil it. After that, rinse thoroughly, boil fresh water again and drain.

Do not use cleaning gels and powders with large abrasive granules. They will scratch the surface, and the scale will stick to the bottom and walls of the kettle even more firmly.

Main disadvantage industrial facilities in that chemical substances may enter the stomach. So it's not harmless. Yes, and not all formulations give the desired effect.

The old fashioned way

You can be sure: time-tested folk recipes guarantee 100% positive result. Ordinary soda, vinegar and "lemon" are recognized leaders among the descalers in the kettle. To successfully get rid of hard deposits, you will need knowledge about dosages, cleansing steps and rules for use in different types appliances.

For an ordinary enameled teapot

Such instances are becoming less and less common in modern kitchen interior. But, of course, they continue to be bought, because they are much cheaper than their electric counterpart. Caring for an enameled teapot is quite easy. The main thing is to do everything in a timely manner.

Vinegar

  1. Fill the kettle with a solution of two parts water and one part table vinegar. Bring to a boil and cool naturally.
  2. Then drain the water, rinse the dishes abundantly.
  3. If the sediment is not completely gone, repeat the procedure.

To boil the kettle from scale with vinegar and not get poisoned by caustic steam, you need to open the windows during operation and put on a protective gauze mask. And before using the kettle, boil clean water “idle” again to eliminate the specific vinegar aroma.

Lemon acid

  1. Fill the kettle with lemon water at the rate of 10 g of "lemon" per liter of water.
  2. Boil.
  3. Leave the hot solution for several hours.
  4. Pour, thoroughly wash off the lime grains.

Store-bought remedy can be replaced with lemon: cut into pieces and boil for ten minutes.

Soda

  1. Boil in a kettle soda solution, diluted in this proportion: two tablespoons of baking soda per liter of water.
  2. Wait until it cools down and remove soft deposits with a sponge.
  3. If the descaling quality is not satisfactory, repeat twice.
  4. This procedure can also be preceded by acetic cleaning.

For electrical appliance

The electric kettle is very easy to use. Heats water quickly and almost silently, looks very aesthetically pleasing and modern. Irreproachable appearance such a teapot also requires internal cleanliness. Regular care is especially necessary for heating elements. It is more convenient to clean a kettle with a disc heater than with a spiral one, reminiscent of a Soviet-era kettle. In addition, the first is more durable and heats the water faster. How to clean effectively Electric kettle from scale? Which methods are suitable for devices made of different materials?

From glass

  1. Boil water with a couple of tablespoons of citric acid and the same amount of soda powder.
  2. Let stand up to 20 minutes.
  3. Wash off the natural acid-base composition.

Vinegar will help to successfully wash scale in an electric kettle made of glass. Everything is extremely simple: open the window, boil water, and only after turning off the appliance, pour two or three tablespoons of food vinegar into boiling water, cover kitchen towel until completely cool. Control to shiny metal surface the heater did not darken. Rinse thoroughly with running water.

stainless steel

  1. Pour a full kettle of water (standard capacity - 1.7 liters).
  2. Add a couple tablespoons of baking soda and boil.
  3. After cooling, remove the white flakes with a soft washcloth.
  4. Rinse thoroughly.

A stainless steel teapot is less prone to lime build-up. Nevertheless, a few more tips will be useful on how to quickly get rid of scale in a kettle made of such material. So, in a container, you can boil the brine from pickled cucumbers or tomatoes. Cleaning with apple or grape vinegar is also recommended - a glass of the product is poured into a boiled liter of water and left for half an hour.

from ceramics

Beautiful painted ceramic teapots, although very durable, require careful and careful handling. There are no special recommendations for cleaning plaque, so choose one of the recipes above.

Remember safety measures while working with boiling water and cleaning agents. folk remedies. This is important because, according to reviews, ceramic teapots are quite heavy, keep heat for a very long time and have rather uncomfortable, very hot handles.

Made of plastic

Such an electrical appliance is the cheapest, lightest and most unpretentious. It will be as good as new if you clean it with any means at hand. You can also try and evaluate a peculiar way: boil water with apple peels in a saucepan, let it brew a little and pour it into an electric kettle. After a couple of hours, pour the “compote” into the sink and rinse the cleaned dishes with water.

Advanced cases, if the plaque does not go away

You do not know how to remove heavy scale in the kettle? Running cases will be “cured” by the following method, which consists of six simple steps.

  1. Add three tablespoons of soda to a kettle with boiling water.
  2. After half an hour, boil again and pour immediately.
  3. Get fresh water and now add a couple of tablespoons of vinegar.
  4. Boil the solution again and pour it out after half an hour.
  5. Remove the resulting loose mass with a soft sponge.
  6. Rinse well to remove the vinegar smell.

Does the method work with Coca-Cola

Salt deposits of calcium and magnesium dissolve under the influence of citric, acetic, orthophosphoric acids. The latter - H3PO4 - is part of the popular Coca-Cola drink. To descale the kettle with Coca-Cola, you just need to pour 0.5 liters of the drink into the appliance (this is enough to completely cover the heater). In 15 minutes, soda will remove light plaque without boiling. You can fix the effect by boiling this sweet flavored liquid in a kettle and at the end just rinsing it well with water.

This unusual way suitable for glass teapot. And for plastic, stainless steel and ceramics, exclude drinks with dyes, they can pigment the walls of an electrical appliance. Try boiling regular sparkling water.

Practice shows that The best way to remove lime deposits, it is to clean the kettle from scale with citric acid by boiling water with a couple of spoons of "lemon". It turns out cleaner and cheaper than using Coca-Cola, and also without a pungent smell, as in the case of using vinegar.

"Options" from scale

Interestingly, there are ways not only to remove scale in the kettle, but also how to prevent its occurrence. To do this, you just need to select a device with additional "options". Inside some models (although they are more expensive), cleaning cartridges are installed that filter and heat water at the same time. There are also teapots with gilding on the spiral, the function of which is to protect the part from hard deposits and corrosion. But the most "advanced" users recommend installing an electromagnetic water converter at home. So in one fell swoop, you can solve all problems with increased water hardness and protect not only the kettle, but also washing machine along with a water heater.

The water in our taps leaves much to be desired, and the question of how to descale the kettle does not lose its sharpness. For electric kettles, the sediment on the walls is not just a terrible internal one, but a deterioration in the thermal conductivity of the metal in proportion to the thickening of the layer, which provokes a decrease in the power of the heater and its service life (wear work has not done anything better yet). Boiling water requires increased time and energy costs. Scale has a similar effect on ordinary kettles - the burner also needs much more time. Outcome: overspending, premature wear household appliances.

The scale that has settled on the heating elements of heating boilers often leads to rupture of pipes. Whether she can break the heating element of the kettle is unknown. Apparently, because the housewives are used to descaling kettles - let's figure out how they do it.

How to clean the kettle from scale at home

There are enough ways to clean the kettle at home. Stores offer a wide range of special means. Some of them work instantly, and some do not work at all. It depends on the manufacturer, his honesty. The vast majority of descaling tablets/liquids/gels are based on acetic and citric acids.

regular teapot

At home, vinegar and citric acid are added:

  • brine;
  • baking soda;
  • fanta, sprite, coca-cola;
  • potato and apple peels.

Not all products suitable for cleaning ordinary kettles are suitable for treating electric ones. The point is the duration of exposure and the proper temperature: if you need to boil for a long time on a quiet fire, in this way it will not be possible to descale an ordinary electric kettle, but a thermos kettle can.

How to clean a kettle with vinegar

Kettle-thermos

This descaling method is suitable for regular kettles and thermos kettles with temperature control. Vinegar must be diluted with water in a ratio of 1:10 (100 ml of vinegar per liter of water), fill the kettle with the solution and put it on the stove (turn it on). As soon as the water boils, you need to see if the scale has exfoliated. If the walls of the dishes have not yet been freed from sediment, leave to boil on a quiet fire for about 15 minutes (the electric one will not boil quietly, therefore the method is not suitable).

Important! After the procedure, the dishes must be thoroughly washed, boil several portions of water in it, and ventilate the room well.

How to clean the kettle with citric acid

Descaling the kettle with citric acid is a universal method that is equally effective for conventional and electric (metal and even plastic) models. Citric acid must be dissolved in water at the rate of 2 teaspoons per liter. Pour the solution into the kettle and boil.

Tip: Don't let your cookware get to the point where descaling will require hard cleaning. With the help of citric acid, carry out prophylaxis: fill the kettle with a solution, as soon as plaque appears on its walls, and leave it for several hours.

How to remove scale with soda

With soda, they do the same as with vinegar, but they boil longer. It is necessary to pour soda with water at the rate of 1 liter per tablespoon, put on the stove, let it boil, reduce the heat to low and keep for half an hour so that the solution barely boils.

After half an hour of boiling, the liquid must be poured out, the kettle should be thoroughly washed and clean water should be boiled in it, after which it should also be poured out.

Non-format: soda, pickle, cleaning

Obvious vinegar and citric acid can be replaced with non-standard, even unexpected, means. The scale in the kettle is perfectly handled by food and drinks.

soda

Excellent tool - "Sprite"

Soda is so "safe" that it does a great job of decalcifying kettles. Why are there dishes - they successfully wash car carburetors with sweet water. Sprite, Coca-Cola and Fanta do the same, but it is better to use Sprite - Coca-Cola and Fanta may well leave colorful stains on metal walls instead of scale.

The method is suitable for any kettles - you don’t even have to keep it for a long time (such a “fusion” composition): you need to half fill the kettle with a miracle drink and bring it to a boil. It is first necessary to rid the water of the gas (it does not clean the gas - the caustic substance is contained in the water itself). The method is beautiful in its clarity. It can serve as a help and evidence base in educating children about the harm of purchased soda.

Brine

Same good way cleaning electric kettles from scale - no need to simmer for a long time. The same vinegar works as an active substance - brine is not an independent remedy. To clean the kettle, it is enough to fill it with brine, boil, cool, empty and thoroughly wash. Cucumber pickle is especially effective.

Anti-calc cleaners

This method is ancient - it was successfully used by our grandmothers and great-grandmothers. Potato and apple peels are used as a cleaning agent (not starch works, but acids). Descaling is simple: you need to load the peel into the kettle, pour water and put on fire.

After the water boils, you need to remove the dishes from the stove, leave for a couple of hours, then rinse thoroughly, draining the solution. Before the procedure, cleanings are also thoroughly washed, if they are potato.

How to descale a particularly neglected kettle

Unfortunately, this method is not suitable for an electric one, but an ordinary kettle, even if it is in a very neglected state, can be cleaned. The success of the method is ensured by complex processing. You need to act in three stages:

  1. Fill with water, add a tablespoon of soda, boil and drain the solution.
  2. Fill with water, add a tablespoon of citric acid, bring to a boil and leave for half an hour over low heat; drain the solution.
  3. Fill again, add half a glass of vinegar, let it boil, leave for half an hour on a quiet fire; drain the solution.

Metal kettle that can withstand tough cleaning

After the procedure, you need to thoroughly wash the dishes, boil several portions of water “idle” in it.

It happens that the sediment remains on the walls, but after such an impact treatment it is easy to remove it with a dish sponge.

Important! Do not use hard brushes, especially those with metal teeth, and abrasive sponges.

Tip: Buy a glass electric kettle with a heated bottom. It is impossible to start it: transparent walls will not allow; scale does not settle on the walls, but floats in flakes; a special cleaner for dishes, glass, ceramics (Cillit, for example) can easily get rid of plaque.

Model with heating bottom and glass walls

At home, it is not so difficult to clean the kettle from scale, but it will take time. Sediment appears due to excessive mineralization of water, but this can be avoided by using purchased water. It is inexpensive (especially when it comes to health: the body does not rejoice when salts and minerals are excessively introduced into it), and you do not have to periodically remove scale.

Someone noticed that the kettle, as, by the way, the stove is the face of the hostess. Therefore, each of us should know how to clean the kettle from scale.

Where does scale come from

Part drinking water includes a huge amount of minerals and salts. Whatever folk methods and you didn’t clean it with modern filters, even a small percentage of various impurities still remain. When sodium salts are heated, magnesium forms limescale, which eats into the walls of dishes and does not want to voluntarily leave it.

This plaque covers any kind of material, so all housewives have to clean their kettles.

Why get rid of limescale

  • Limescale has a low thermal conductivity, which is why water boils more slowly.
  • If the kettle is electric, and you are too lazy to clean it, the plaque quickly disables the heating element.
  • Water becomes tasteless due to scale. And if it boils for a long time, it is also cloudy.

Effective ways to deal with scale

How to clean a kettle with simple means that can be found in every home.

Hit the scale with citric acid

  1. Type a full kettle of water, pour 1-2 sachets of citric acid (depending on its volume and scale thickness). Boil.
  2. Let the solution cool slightly, in the meantime, the acid will have time to corrode the plaque as much as possible. Drain the liquid.
  3. Boil water with citric acid again. Drain the liquid again and rinse the kettle thoroughly.
  4. You can replace citric acid with vinegar - 100 grams per liter of water.

Removing a thick layer of scale

If the solution with citric acid did not give the expected result, try another method:

  1. Dissolve 2 tablespoons of baking soda in 1 liter of water. Pour this solution into the kettle, boil for about half an hour.
  2. Drain the resulting liquid. Pour water and add a tablespoon of citric acid, boil.
  3. Pour water with vinegar a third time (the thicker the layer, the more vinegar), boil for 30 minutes.
  4. After such a triple treatment, the scale becomes soft and easily lags behind the walls. Delete it or kitchen sponge, or wooden spatula. Rinse the kettle thoroughly, boil clean water for reliability and pour it out.

Trying to clean Coca-Cola

  1. Release all gas from the drink before use.
  2. Fill half of the kettle with Coca-Cola, boil.
  3. Pour out the contents, rinse.
  4. Some claim that "Fanta" and "Sprite" are also suitable for this case.

Is your teapot sparkling clean again? Isn't it time for a fragrant tea? Good tea drinking and pleasant conversation!

 
Articles By topic:
Pasta with tuna in creamy sauce Pasta with fresh tuna in creamy sauce
Pasta with tuna in a creamy sauce is a dish from which anyone will swallow their tongue, of course, not just for fun, but because it is insanely delicious. Tuna and pasta are in perfect harmony with each other. Of course, perhaps someone will not like this dish.
Spring rolls with vegetables Vegetable rolls at home
Thus, if you are struggling with the question “what is the difference between sushi and rolls?”, We answer - nothing. A few words about what rolls are. Rolls are not necessarily Japanese cuisine. The recipe for rolls in one form or another is present in many Asian cuisines.
Protection of flora and fauna in international treaties AND human health
The solution of environmental problems, and, consequently, the prospects for the sustainable development of civilization are largely associated with the competent use of renewable resources and various functions of ecosystems, and their management. This direction is the most important way to get
Minimum wage (minimum wage)
The minimum wage is the minimum wage (SMIC), which is approved by the Government of the Russian Federation annually on the basis of the Federal Law "On the Minimum Wage". The minimum wage is calculated for the fully completed monthly work rate.