• Repair
• Repair
• Interior Design
• About everything
• About plumbing

How to choose the right floor tiles for your kitchen. Ceramic floor tiles: how to choose. Alternative types of tiles

The floor is significantly different from the tiles that are used for wall cladding. After all floor version should be stronger and more wear-resistant, since it has a greater load than wall tiles. Therefore, it is necessary to choose it especially carefully.

Key parameters to pay attention to

The main requirements for the floor in difficult places type of kitchen, bathroom or toilet - this is strength, moisture resistance, fire resistance, durability and, of course, ease of cleaning. It is also desirable that the coating has anti-slip properties and has a good design.

When choosing a floor tile, pay attention to its features that noticeably distinguish this coating from similar ones. wall options. So, floor tiles are different:
- thick (it is noticeably larger and thicker than the wall, as a result of which it is stronger);
- wear resistance class (it is a priori higher than that of other coating options, as it is intended for service in a room with intense load);
- ability to withstand mechanical loads;
- anti-slip surface;
- resistance to chemicals (after all, wall tiles are washed less often than floor tiles).

To date, there are several classes of wear resistance of floor tiles. 1 and 2 are those that are mainly used in rooms with a small load (for example, bathroom). Class 3 is usually used for rooms with an average level of exploitation (usually such tiles are used in any residential area, including in the kitchen). 4 - the one that is used for finishing rooms with high traffic people, for example, in the hallway. The most wear-resistant is usually used in crowded places - restaurants, shops, offices, etc.

Carefully study the label to verify the wear resistance class with your needs. After all, if you get a weak material, it will quickly crack. And yes, you don't have to pay extra.

When purchasing floor tiles, be sure to make sure that it is exactly the floor. A foot is drawn on it as an identification element. An increased wear resistance class is depicted as a shaded foot. A snowflake, which is depicted on a tile or package, indicates that the tile is frost-resistant, but at the same time has low moisture absorption.

The choice of tile depends on what room you are going to use it for. So, for example, if for the kitchen, then it must necessarily withstand frequent exposure to moisture, as well as treatment with detergents, while remaining durable and attractive in appearance. In addition, her distinctive feature there must be a base that does not allow moisture and grease to be absorbed into the surface and remain there in the form of dark and ugly spots.

This parameter must be checked very clearly. After all, if the tile absorbs all the dirt, the coating will have to be changed after a couple of months.

The tile that is used for the bathroom should have a smooth (not porous!) Surface, which at the same time absorbs moisture well. by the most the best option in this case, it will become porcelain stoneware. But tile is also suitable, which, if laid correctly, should withstand frequent wetting, which will not affect its quality for many years.

The main parameter that you need to focus on when choosing floor tiles is safety. After all, a slippery tile coating can become a source of frequent household injuries, often serious ones. Therefore, experts recommend choosing tiles with a matte surface, and for rooms with high humidity - also embossed. For the corridor, in no case can you choose a relief one, otherwise you risk dooming yourself to endless cleaning of the floor, which will not be effective. Dirt will get into the grooves on the tile, and it will be quite problematic to get it out of there. For the corridor, the abrasion of the tile is very important. After all, here the effect on ceramics is exerted by various debris, sand and particles of dirt and dust that enter the house on the soles of shoes. But in any case, tiles for such active areas of the house will be an order of magnitude better than wood flooring.

floor tile design

Floor tiles can be various design- from classical to modern. The classics are easier to lay down, since they fit much easier and combine more correctly. At the same time, you need to choose the design of the tile, based on the overall design of the apartment. After all, if the whole kitchen is classic version, and you cover the floor with art-house tiles, there will be a complete imbalance.

The price of a tile often depends on its design. Therefore, try to weigh the pros and cons for purchasing one or another option.

Ceramic tile- this is one of the most convenient finishing materials, it is practical and suitable for finishing various rooms, moreover, it can be used for both indoor and outdoor work. Other advantages of ceramic tiles are their durability, versatility, ease of maintenance and, of course, aesthetic appearance. Today, there are a lot of companies producing tiles, ceramic tile collections are also diverse, so choosing and buying turns into difficult task. How not to make a mistake in choosing this finishing material? And by what criteria to choose it?

Criteria for choosing ceramic tiles

1) One of the main criteria is climatic conditions, especially if the tile is intended for outdoor robots or finishing the facade of buildings. It is necessary to understand what degree of its frost resistance.

2) Another criterion is the place of application. Tiles should be chosen depending on which room should be lined with ceramic tiles - kitchen, bathroom, hallway, etc., as well as the floor or walls in these rooms. To determine the purpose of ceramic tiles, there is a special marking. Tiles are also divided into groups depending on the degree of wear, durability and resistance to various chemical substances. The marking is a pictogram that is applied to the packaging

3) Tiles are also chosen according to the color palette, texture and pattern. So, for example, there are wood-like ceramic tiles that imitate parquet, or stone-like ceramic tiles. Of course, these are secondary criteria, and they proceed to this step only when the first two are taken into account.

4) The last is the size of the tile, for example, large tiles are chosen for the floor, and a more compact or even small size is suitable for the wall.

Consider some of the meanings of the icons

1. There are pictograms in the form of a human foot. This means that ceramic floor tiles, and that they are designed to floor cladding, and if the background under the foot is shaded, then the tile has increased resistance to abrasion, this can be used in shops, offices and other premises that are subject to increased wear.
2. If the contours of a human hand are outlined on the pictogram, then this tile is intended for facing walls and other surfaces that do not accept any load.
3. The pictogram in the form of a snowflake indicates the frost resistance of this tile and its resistance to low temperatures.
4. There is also a symbol of fire with various numbers. This is the number of firings that the tile has gone through.
5. The symbol A indicates that the ceramic tile is made more than modern methods with more exact way cuts.
6. Symbol B, indicates the worst quality, but it is also cheaper.
7. If the marking consists of several identical pictograms at once, then this tile has an increased quality.

With markings A and B, other additional designations can be used, such as:
AI, BI, which means that this tile is intended for exterior finish. Basically, this marker indicates ceramic facade tiles.

Tiles marked AII, BII are also suitable for outdoor facing works, although it has low moisture resistance.

And those tiles that are marked with the sign AIII, BIII can only be used for internal finishing works.

But according to the degree of wear resistance, all types of ceramic tiles intended for flooring can be divided into five main groups. Floor ceramic tiles are marked with PEI symbols.

Group 1. This is a tile that can be used in the bedroom or in the bath.

Group 2. Tiles of this group are used for facing cabinets and living rooms.

Group 3. This group is suitable for finishing the kitchen or hallway.

Group 4 and 5. Since the tiles of these groups are the most resistant to abrasion, it is advisable to use them in public places with a high degree of movement, as well as exposure to chemical and abrasive substances.

When choosing a ceramic tile, you should also pay attention to its packaging in order to find out information about trademark, country of origin, square meters and the number of tiles in the package, as well as color and grade. The above-mentioned pictograms and designations of the groups to which this tile belongs should also be indicated on the packaging.

Be sure to take into account that the floor tiles for the bathroom or hallway should in no case be slippery, as it can become traumatic if moisture gets on it. The best option choice of tiles for these rooms is a tile with a rough or matte surface. But for the bathroom walls better fit tiles with great resistance to chemicals, as bath walls are most often exposed to various cleaning, washing and cosmetics. The same can be said about kitchen tiles both floor and wall. But here they are exposed to more aggressive agents, so the requirements for them must be stricter than for bathrooms.

Choosing a color scheme suitable for a particular room

And only after you decide on the purpose and quality characteristics of ceramic tiles, you can take up the aesthetic side: design, pattern, color scheme and size of the tile. It is also important to carefully analyze the conditions of the room for which the tile is purchased. Particular attention should be paid to such characteristics as lighting, general color palette, the size of the room itself, its style. For example, for small room tiles will not fit large pattern or large sizes. Or tiles in light colors can visually expand a small space, and a vertical pattern will increase the walls in height. On the other hand, scratches or cracks will be more noticeable on light-colored tiles, so it is better to choose dark-colored tiles for the floor in the hallway.

How to calculate the required amount of ceramic tiles

In order to calculate right amount tiles, to be measured exact area the surface to be trimmed, as well as take into account with what tool the tile will be laid. Do not forget about the drawing, sometimes in order to achieve symmetry, you have to take a little more than what comes out according to the calculations. For greater confidence, it is better to buy 10% more than the required quantity, since in any batch, even the highest quality ceramic tiles, a certain percentage of rejects is acceptable, in addition, do not forget about possible damage when cutting the material to the desired size.

1) back side tiles should be even, without any cracks. General geometry correct form, without bulges and sticking. flat surface you can check by attaching two tiles to each other, while there should not be any gaps and cracks between them.

2) To avoid the incident of a color or pattern mismatch for the entire purchased batch, do not be lazy and compare them by taking one tile from different packages.

3) Before using ceramic tiles for cladding, you need to check it for water resistance, this is done as follows: put the tiles in water for 10-12 hours, and if microcracks form on it, then it is better to return such a tile to the seller.

Producers of luxury ceramic tiles

Today, there are many domestic and foreign companies producing ceramic tiles. However, Italian ceramic tiles, as before, are considered the best both in terms of quality and aesthetics. Most beautiful houses of the world are finished with ceramic tiles of Italian manufacturers. At the same time, there are many Italian companies that have long become brands and produce only elite ceramic tiles. Versace, Viva ceramica, Caesar, Capri, Casabella and others.

A little history of Italian tiles

The history of Italian ceramics spans several centuries. The origins of its production date back to the beginning of the tenth century. The first Italian factories for the production of ceramic tiles were located on the island of Mallorca, since high-quality raw materials were mined here - a special kind of clay, with the help of which highly porous ceramic tiles were produced.

For the first time, this tile was intended only for facing churches and temples, later it began to be used among the nobility. The wealthiest citizens of Italian cities began to use tiles for the decoration of their castles. But modern Italian tiles began to be produced at the beginning of the 20th century. Experienced Italian ceramics masters do not forget about the traditions of the past, but at the same time they are constantly looking for new design and technological solutions. All this leads to the fact that when we hear the words "ceramic tiles from Italy", we immediately present tiles of the highest quality.

Thanks to the merit of ancestors, Italy is a trendsetter in the world of ceramics. The new ceramic tiles of Italian masters, presented in brilliant collections, impress with their sophistication and unexpected flight. design fantasy, sometimes we forget that it is just a ceramic tile, it is so reminiscent of paintings or living natural landscapes. Warm ceramic tiles imitating desert sand can instantly take you many kilometers to the distant and sultry Sahara. Give yourself comfort and a fairy tale by choosing the best quality tiles for your home.

Ceramic tiles ceracasa damore - a wide range of Spanish tiles, high quality.

Which tiles are suitable for the floor in the kitchen, how to choose the right size, format and read the markings, the nuances of laying tiles on the floor, manufacturers, prices and photos of floor tiles in the interior of the kitchen - here.

There are many advantages to ceramic floor tiles. The main one is that tiles will last much longer in the kitchen than laminate or linoleum, and are much more practical to clean. But it also has its downsides.

Ceramics - very cold material. You can only walk on tiles home shoes. Therefore, if you want to make the kitchen more comfortable, you will have to invest in a floor heating system. Due to its excellent thermal conductivity, ceramic tiles are ideal for its device. Unlike the same linoleum.

Another disadvantage of tiles is poor sound insulation, so a soundproofing layer may be needed. An active child can injure his knees on a hard tile, and cups or plates that accidentally fall to the floor are guaranteed to break. Yes, and the tile itself can crack from a strong blow. Laying tiles takes time, experience, or money, and the work is quite messy.

Do these cons scare you? Then we figure out how to choose the best tiles for your kitchen.

What tiles to choose for the floor in the kitchen

• Do not lay wall tiles on the floor (its surface will quickly lose beautiful view, and the tile itself may crack), but the floor tiles on the walls can. Floor tiles are much stronger and more durable due to a special production technology. Look for foot marks on the box. Wall tiles are indicated by a palm-shaped icon.
• For the kitchen, it is especially important that the floor surface is not slippery. High-quality ceramic tiles must be marked with a coefficient of friction. If it is more than 0.75, such tiles are not slippery and quite safe, you can safely put them in the kitchen. Do not take tiles with a coefficient of friction less than 0.4 - if water spills on the floor, one of your household members may slip.
• The floor in the kitchen is subjected to the heaviest loads, so experts recommend laying durable and wear-resistant tiles - hardness class III according to the PEI classification or class 5 according to GOST. If you don't use your kitchen very often, a PEI II grade will do, but these tiles are less durable. Some manufacturers designate hardwearing tiles with a shaded foot icon.
• If you like to keep your kitchen sparkling clean and often wash your floor with strong detergents, you should give preference to AA-certified ceramic tiles. The surface of such ceramics has maximum resistance to chemicals. So, she is not afraid of the most aggressive household chemicals. The protective layer of this tile repels dirt and is easy to clean.
• For a kitchen floor, matte tiles are better than glossy tiles. On a matte and semi-matte surface, scratches and scuffs are much less noticeable. However, keep in mind: if the tile is too rough and porous, all the dirt will stick to it, and the floor will constantly look dirty. For the same reason, you should not lay too embossed tiles in the kitchen.

Sizes and formats of kitchen floor tiles

Square and rectangle are the most popular floor tile formats. Less common are ceramic or cement tiles in a hexagonal or octagonal shape. As a rule, it is used in classic or traditional kitchen interiors.

As for the sizes, most often tiles of 20x20, 30x30, 40x40 cm and their variations are placed on the floor. For example, 31.6x31.6 or 33.3x33.3 cm. Sometimes on kitchen floor you can also find a small tile of 10x10 or 15x15 cm format. It looks best in a Provence or country style kitchen, but sometimes it fits perfectly into modern interior. Floor tiles are thicker and stronger than wall tiles. Its average thickness is from 6.5 to 11 mm.

3 important nuances

1. The ideal option is when the width of the tile is a multiple of the width and length of the room. For example, in one square meter nine tiles of 33.3x33.3 cm in size fit perfectly on the floor. Then most of the tiles will not have to be cut. This means that installation will be easier, faster and cheaper.

Before buying tiles, carefully measure the length and width of your kitchen. Explore the range of several online stores or look at the construction hypermarket. Choose a few floor tiles that you like the most and write down their dimensions. Now take a calculator and calculate which tiles your kitchen will have exactly the right size.

If you really like a particular tile, but its size does not fit well with the dimensions of your kitchen, be sure to check: there may be a similar design in a different size in the same collection. Many collections of ceramics are produced in several sizes and formats, and if they are not available, in many cases the seller can bring the tiles you need to order.

2. When choosing ceramic tiles, be especially careful - remember about its caliber! The fact is that the actual size of a tile can differ by 5-7 mm in plus or minus from the nominal, indicative, which the manufacturer indicates on price tags and in catalogs. You have chosen a tile 30x30 cm, and its actual size is 29.5x29.5 or 30.5x30.5 cm.

This is not a marriage, but a feature of ceramic production.

Serious tile manufacturers, European and Russian, always sort tiles by caliber and indicate this parameter on the packaging. Chinese factories often neglect sorting. Therefore, when buying Chinese tiles, be prepared for the fact that ceramics of different sizes may be in one box. It will have to be sorted and, if necessary, cut yourself.

A good solution to the caliber problem is the so-called rectified tiles, which are specially cut at the factory to exactly the same dimensions. In addition, it can be laid almost without seams. This means that pollution will not accumulate in them, and such a floor is easier to clean. But rectified tiles are much more expensive than regular ones.

3. When deciding on the size of the floor tiles, keep in mind the evenness of the base. If the floor in the kitchen has defects, and the work on its careful leveling does not fit into the budget of your repair, give preference to a small tile 10x10 or 20x20 cm. It visually hides floor irregularities, and there will be fewer voids under it, due to which the tile may crack.

Color and tone

Ceramic tiles from the same collection, but from different batches, differ not only in size, but also in tone. For example, the color can be darker or lighter, brighter or, conversely, muted. Manufacturers sort the tiles by tone and apply the appropriate markings to the box. As a rule, this is a combination of letters and numbers or some kind of conventional designation.

For example, A45 or 12.

Before paying for the purchase, make sure that all the tiles you have chosen from the same batch and the markings on the boxes fully match in all respects.

designer advice
If tiles of one tone are not enough for you, take the tone as close as possible to the chosen one. For example, if you need tone B12, B11 or B13 will do. If there are none, take any tile marked with tone B.
But be sure to take the tiles out of the boxes and make sure that the differences in tone are not critical. If the tones of the tiles differ too much, you can go for a trick. A significant part of the floor in the kitchen is occupied kitchen set, and no one will see the floor under it.
The main thing is to lay out the tiles during laying in such a way that the central, visible, part of the floor is as uniform as possible in shade.

Choosing the design of floor tiles for the kitchen

• A light tile floor will make your kitchen look lighter and more visually spacious, so this option is well suited for small space. Dark tiles will only emphasize the small size of the kitchen. But even if the area allows, the dark floor should definitely be compensated. light furniture and wallpaper.
• If your kitchen windows face north or west, choose a solid color finish in warm, light tones for the floor. And the warm "southern" kitchen will also perceive well the tiles of rich cold shades.
• In the kitchen at modern style, hi-tech or minimalism, the best choice is a plain floor or tile with the most neutral and unobtrusive pattern. A classic-style kitchen is perfectly complemented by marbled tiles or ceramics with antique ornaments. And the country or Provence interior will be completed by a floor lined with artificially aged ceramics, imitation of cotto tiles or a patterned ceramic “carpet” made of metlakh tiles or its imitation.

Among the floor tiles there are many collections in natural colors - different shades of brown, beige, gray colors. Such colors have an important plus - they are not easily soiled and therefore are well suited for the kitchen.

Wood effect floor tiles or ceramic parquet

You can read in great detail about this finishing material in this special review. Keep in mind: most of the wood look tiles are not tiles, but porcelain stoneware. A long ceramic tile, resembling a board or laminate, breaks easily, so short "planks" or "planks" are often made from tiles. square tiles with a pattern of wood, imitating typesetting parquet.

Often, wood-effect tiles are rectified, they are laid without visible seams. This creates a very realistic illusion of a real wood floor. parquet board or solid wood surface.

The most simple and unpretentious floor tiles under a tree in online stores in Moscow and the region can be bought for about 470-700 rubles per square meter (for example, the Dublin collection from Uralkeramik, Karelia from the Kharkov tile factory). Russian tiles under the tree and parquet from the factory Kerama Marazzi costs approximately from 650 rubles per square meter (collections Marvelous Garden, Cassia, Glasgow).

Prices for Spanish ceramics imitating a wooden floor start from 1300-1500 rubles per square (Wood collections from Monopole Ceramica, Brilliant from Absolut Ceramica, Lignum Natural and Savage from the Cifre factory, Bosco from Gaya Fores, etc.)

Stone effect floor tiles

Good ceramic imitation from natural stone in appearance, in many cases only professionals can distinguish. So modern production technologies make it possible to convey the characteristic pattern and texture of granite, quartzite, marble, basalt or other stone. In most cases, a stone-like tile is also not a tile, but porcelain stoneware - it is stronger and more durable than ordinary ceramics. But even among ordinary ceramic tiles you can find very interesting solutions.

Of the inexpensive options (an average of 500-700 rubles per square meter in Moscow online stores), pay attention to the collections of the Volgograd Ceramic Factory (Allegro), Kerama Marazzi (Transbaikalia, Cameo, Still Life, Aurelia, Sella, etc.), Shakhtinskaya tile ( Pietra), Atem, Nephrite Ceramics (Watercolor), Uralceramics (Adagio).

The average price option is Polish "stone" tiles for 1000-1200 rubles per square meter (Samaria from Tubadzin and others) and Spanish ceramics for 1000-2700 rubles per square (collections of factories Europa Ceramica, MYR Ceramica, Venus Ceramica, Mainzu, Argenta Ceramica, Pamesa, Keros Ceramica, Dualgres, etc.).

Italian stone-like floor tiles vary greatly in price - depending on the factory, its cost varies from 1,200 to 4,000 rubles per square meter (factories Imola Ceramica, Serenissima Sir La Faenza, Del Conca, Majorca, etc.

Important!
Not original but very important advice- be sure to buy a tile with a margin. Part of the tile may break during installation, “get lost” during trimming, or your floor will need repair over time, and you will no longer be able to find exactly the same tile in tone and size.
If the laying pattern is simple, 5% is sufficient. With a complex modular or diagonal laying it is better to add at least 10% on top.

Laying floor tiles - 3 things you need to know

1. If you plan to do repairs in the kitchen yourself or save on the services of a tiler by inviting a cheaper craftsman, keep in mind: the slightest deviation from the tile laying technology can have sad consequences. If the subfloor is not level enough and there is an air gap between the floor and the tile, the tile can easily crack if some heavy object falls on it and have to be replaced. Make sure that such voids are no more than 10% of the floor area and they do not concentrate in one place.
2. It is highly desirable to remove the old flooring. A tile floor will last a long time only if the base is well prepared. It should be smooth, firm and dry. If the floor is cement, remove bumps and bumps, repair cracks and holes. If the old wooden one, properly fix the "loose" boards and strengthen with additional spacers.
3. Thoroughly clean the floor of dust and debris. All this is necessary so that the tile and glue can adhere to the surface as best as possible.

How to choose floor tiles? A similar question is asked by many practical people who prefer only wear-resistant finishing materials. However, in the process of choosing ceramic products, it is necessary to take into account many factors that affect the life of the floor, its aesthetic performance and ease of maintenance of the coating.

What does the label say?

The choice of coating is largely determined by the purpose of the room itself, its microclimate and intensity of use. What tile to choose for the floor? When visiting a building supermarket, not all buyers pay attention to product labeling, which can tell a lot:

• Sole on a black background. This icon indicates that the coating is intended for the floor, and not for walls or ceilings;
• Snezhnik. Indicates that the material is frost-resistant;
• Sole on a shaded background. IN this case coating has improved strength characteristics and can be used in high traffic conditions;
• Marking color. First-class products are indicated in red, but low-grade products are indicated in blue or green.

As a rule, the information provided on the packaging is sufficient to assess the quality of the material. If a consultant talks about the unprecedented low price of a high-end green label product, be sure that this is not true.

Technical criteria for choosing a tile

How to choose tile for the floor? First of all, you need to evaluate the technical characteristics of the coating, because the service life of the floor will depend on them. So what are the things to pay attention to?

• Structure. The ceramic surface can be either very dense or porous. In the second case, the coating is more hygroscopic, so if you need to lay the floor in the bathroom or kitchen, it will not work;
• Thickness. The degree of wear resistance of the floor is strongly influenced by the thickness of the material. It is desirable that the tile has a thickness in the range from 8 to 14 cm;
• Slip resistance. In areas such as the kitchen, you need to use tiles with a rough or embossed finish. No less safe will be a tile with a corundum layer, which also prevents strong slipping;
• Combination with "warm floor". Not all types of ceramic products can be subjected to severe temperature fluctuations;
• Additional protection. It is desirable that the coating has at least one additional protective layer that would prevent mechanical damage.

What is the best floor tile? Naturally, the coating with improved technical specifications and additional protective layers is more expensive, but it is on these parameters that the period of floor service will depend in the future. When choosing a high-quality coating, tiles, even under conditions of intensive use, can last at least 35 years. And in the long term, this is a very decent savings on restoration or a complete replacement of the floor.

Aesthetic criteria for choosing tiles

No less important is appearance coatings. It should harmoniously fit into the style of the room and be combined with the surrounding objects: furniture, plumbing, decor elements. How to choose ceramic floor tiles? Let's highlight a few main criteria:

• Cover type. You can purchase tiles with a glossy or matte surface. The first is able to visually make the room more spacious, but for living rooms and corridors, a floor with a matte surface is more suitable;
• Color spectrum. This parameter is largely determined by the style of the room, the taste preferences of the owners, as well as the lighting. Too bright and active patterns on the coating attract a lot of attention, so it is better to combine such tiles with “calm” furniture and other finishes;
• Size. It should be borne in mind that a tile that is too large in size “eats up” space, so it is definitely not suitable for compact rooms. Small details visually make the room bigger and more comfortable;
• Inter-tile seams. The visual perception of the floor is greatly influenced by the size of the joints between the plates, as well as the color of the grout itself. Contrasting grout looks unusual and more dynamic, and grouting to match the tile will make it monolithic.

Common Mistakes

In fact, the selection of tiles is a very responsible event and it is by no means possible to solve this issue carelessly. A lot of people already after six months or a year were disappointed in their own choice, because they made such mistakes:

• They did not focus on the interior of the room. Flooring should be chosen only in accordance with the future stylistic design of the room, the color of other surfaces, the shade of furniture and decorative elements;
• Tiles were not inspected prior to purchase. Sometimes batches of ceramic products are produced with a defect, which can only be detected during inspection. Before you buy a tile, pay attention to the presence of any cracks, chips and other defects;
• The choice of coating is only on an aesthetic basis. A successful design does not guarantee excellent quality, so first of all pay attention to technical specifications and product labeling.

Manufacturers overview

What kind of ceramic tiles to choose for the floor? In order not to make a mistake in choosing a really high-quality tile, first of all you need to focus on the rating of manufacturers who have been able to recommend themselves well. Below are several manufacturers of quality ceramic products whose tiles are well known throughout the world:

• Imola. Italian manufacturer of ceramic tiles, which is in the process of production floor covering uses Color Definition System technology. This allows you to create beautiful graphic images on tiles of almost any color;
• Gomez & Gomez. The Spanish factory produces tiles of single and double firing. The coating has an additional polymeric and antibacterial layer, which not only prevents the wear of the material, but also the growth of mold;
• Gambarelli. In the process of tile processing, the manufacturer processes the edge so finely that when laying the seams between the tiles are practically invisible, this creates the impression of a monolithic coating.
• Cerpa. The Spanish factory for the production of ceramic tiles has gained popularity due to the special manufacturing technology of products. Almost all tile collections are additionally treated with polymer compounds that prevent mechanical and chemical damage to the coating;
• arcana. In the production of tiles, the manufacturer focused on the unusual texture of the coating. It is this company that produces one of the best tiles, capable of imitating a cut of a tree, parquet, massive board and other natural materials;
• Ceramika Color. One of the best Polish manufacturers of ceramic and porcelain stoneware products. The increased wear resistance of the tiles is due to the double firing of a special clay composition with further treatment with bactericidal compounds.

In the process of choosing a tile, it is necessary to pay attention to many technical and decorative nuances. Only by taking them into account can one really a good choice floor tiles.