Why does the bathroom mirror fog up? How to make your bathroom mirror fog up. How to achieve dry glass with improvised means
A necessary item in every bathroom is a mirror, it is used by almost all family members. But, the functionality of this accessory is significantly reduced if the surface, at the most inopportune moment, is covered with perspiration. What can be done so that the bathroom mirror does not fog up and the image in it is always clear?
Why does glass fog up?
The main cause of fogging is the temperature difference between the air that is saturated with water vapor and the reflective surface. The mirror heats up slowly and it always stays cooler. The air next to it cools and when a certain mark is reached - the “dew point”, moisture droplets settle on the glass.
When fogged, the mirror ceases to reflect objects and it becomes impossible to use it for its intended purpose.
What means will help protect the mirror from fogging?
In order not to sweat the mirror coating, you can resort to the following simple tips:
- Glycerol
When washing both windows and mirrors, it is recommended to add a small amount of glycerin to the water. This is a non-toxic, colorless substance that is used to make cosmetic soap and can be purchased at any pharmacy department.
- Automotive glass defog
If weekly wipe the mirror special composition, then it will not sweat, but such an event does not provide a lasting effect. You can buy a similar product at an auto accessories store.
- Shaving cream
By borrowing this tool from the representatives of the stronger sex, you can provide a clear image in the mirrors for several weeks, without a hint of condensation. The cream is applied to the surface and wiped with a towel or paper napkins.
Another tool that protects mirrors from fogging. To prepare the composition, dilute 2 tsp of gelatin in 100 ml of water and wait until it swells. The resulting solution wipes the dry mirror surface in the bathroom. As a result of the procedure, an invisible protective film will appear on it, preventing moisture droplets from settling.
- Acetic acid solution
To prepare it, you need 500 ml of hot water and 5 tablespoons of essence. In the resulting liquid, a napkin is wetted (it is better to take from microfiber) and the surface is wiped. But, you do not need to wipe the mirror dry, the moisture from it should evaporate on its own. The effect of "anti-fogging", in this case, persists for 2 weeks.
- Glass cleaner and soap
If the mirror sweats, then you can wipe it with a cleaner, and then with a sponge and soap, rubbing until the surface becomes transparent. A film of soap will remain on it for about a week and a half and will protect it from settling drops of steam.
You can also take a bar of soap, draw stripes on a dry mirror, which should then be rubbed with a soft cloth and removed until the glass is completely clean and shiny.
There is one caveat - the soap film will protect only perfectly smooth surface, there should be no salt deposits on the mirror.
- Shampoo
A little washing liquid should be applied to a dry cloth and carefully wipe the glass. You can forget about the steam "curtain" for a month.
Similar simple ways do not allow the smallest particles of steam to cover the mirrors, thereby maintaining their functionality. However, there is another option - to reduce the humidity in the bathroom so that there is no excess steam, which creates a problem.
A matter of technology!
As you know, the lack of proper ventilation in the bathroom leads to the fact that the air in this room cannot fully circulate. Hence arises high humidity, mold development and surface fogging. What can be done to improve the movement of air masses?
- Cleaning the ventilation grill
If serious problems with the system not, it is enough to remove dust and pollution to ensure a full-fledged air flow. It is not difficult to evaluate the result - the mirror will fog up much less.
- Installing the hood
If the ventilation itself does not perform its functions properly, then the previous method will not help. In this case, to increase the intensity of air movement, it is recommended to install an exhaust fan in the ventilation opening and provide it with electrical power. It is not necessary that the device works constantly, it is enough to start it when necessary.
In addition, in the home appliance market, today you can find fans that react to light and turn on immediately. The fact that it is functioning can be understood by slightly buzzing sounds.
When choosing a suitable hood, you should take into account the area of \u200b\u200bthe bathroom and the size of the ventilation opening.
- Installing the mirror blower
A good effect can be achieved by installing a special fan, which is designed for local blowing of the mirror surface. Similar unit It is inexpensive and consumes very little electricity.
- Replacing a bathtub with a shower
Thanks to this multifunctional plumbing device, it is possible to isolate vapors from the rest of the room. Of course, among other options, this one is the most expensive, but it solves all the problems that excessive moisture causes. Also, the shower cabin prevents splashing of water, making the stay in the bathroom more comfortable.
- Mirror heating
If the temperature of its surface approaches the temperature of the air mass, then water vapor will avoid the “dew point” state, which means that the mirror will not be covered with tiny drops. To achieve this result, you can purchase a specialized device, it is also called an "anti-fog", which is successfully used by many motorists. It is installed in a certain way and connected to a power source.
In fact, the device is a wire with filaments. It is attached to the back of the mirror surface and connected to a power source.
Surely everyone knows the situation when, after a hot shower or a relaxing bath, you want to look at your ruddy face in the mirror, but this does not work, because it is foggy. You have to either wipe the surface with your hand, leaving stains, or wait until the bathroom is ventilated and the mirror becomes transparent again. There is a solution for this small but such an unpleasant problem. And it's easier than you think.
In order for the surface of the mirror to always be transparent, and not cloudy, you need to remember an elementary trick. You will need a regular bar of soap.
Before you start, make sure the mirror is dry. Then take the soap and run it several times over the surface of the mirror, leaving streaks. The mirror will become cloudy, but do not be afraid of this.
Next, take a soft cloth and start rubbing the mirror surface with it until the traces of soap disappear. Now you don't need to worry about the fact that the mirror may fog up. Feel free to take a bath, and then admire your reflection!
By the way, the same can be done with glasses. Then, going from cold to warm, you will not experience discomfort, waiting for the glasses to become transparent again.
Taking a shower or lying in the bathroom is a real bliss, only after that it is problematic to use the mirror. It fogs up and you can't see anything. To wipe it, you have to look for a rag, and after the room dries, clean it from stains. But there are several cunning ways avoid these difficulties. It is enough to treat the mirror in advance with one of the products that everyone will definitely have in the bathroom.
There is nothing easier than to protect the mirror from fogging. To do this, you do not need to look for special cleaning products, what is at hand will do. A lasting effect will be observed when using any of these products, the main thing is that you apply it before you take a shower. It is best to do this during the next cleaning in the bathroom when you wash the mirror.
1. Toilet soap
This method was well known to our grandmothers. You need to use the most ordinary toilet soap. We rub the mirror with a bar, without missing a centimeter, and after that we erase the stains with a rag. Use microfiber, and you will not have to make any effort. The mirror will look perfectly clean and will remain transparent when the temperature changes. This method is effective for about 10 days, so you can simply forget about it until the next cleaning.
2. Toothpaste
That toothpaste- an excellent cleaning agent, many housewives know. It is also possible to bring a mirror to the ideal view with its help. It is convenient to rub the paste with a cotton pad (apply a few peas on it and rub it thoroughly over the surface). Then, rinse off the remaining paste with water. After this treatment, the mirror will not fog up.
3. Shampoo
Shampoo is another product that can be found in any bathroom. Try putting a few drops on a tight paper towel, wipe the mirror, formed a special protective film. If marks remain, remove them with a dry paper towel.
4. Shaving foam
With the help of shaving foam, you can also achieve an excellent effect, the main thing is not to overdo it with the amount of the product. Apply quite a bit, rub with a paper towel. Experienced housewives know about. Not using them is just stupid!
How long have you been taking warm shower or a bath? Did you notice that the mirror is fogged up again? Many people think that nothing can be done about it. Most simply wipe the mirror with a towel and are content with a distorted reflection. Someone is using folk remedies, for example, wipes the surface of a mirror with a solution of vinegar.
But there is a simpler affordable way protect the bathroom mirror from fogging. It is this method that will be discussed in this article.
This film is connected to the mains in the same way as forced ventilation or lighting. That is, the heating film only consumes electricity when there are people in the bathroom.
As you understand, the cost of this device directly depends on its surface area and power. So that you can navigate the price, I suggest that you study this table:
Installing a heating film to defog the mirror
1 step. Turn the mirror over and remove any dirt from the back of the mirror. There should be no dust, debris and grease stains.
2 step. Determine the middle of the mirror, this is where the heating film will be attached.
3 step. Slightly peel off the protective layer from the film and gently stick it to the mirror. Try to make sure that there are no air bubbles under the film.
4 step. Strip the wires of the heating film and connect them to the mains. The ideal option connection will be the lighting wiring above the mirror.
To prevent the bathroom mirror from fogging up, you need to take some steps. simple measures. There are several ways to get rid of this unpleasant phenomenon, all of them have different efficiency and are valid for different periods of time.
1
The cause of fogging is the temperature difference between the air, which is maximally saturated with water vapor, and the surface of the mirror. The mirror heats up more slowly, it will always be colder. The air near the surface of the glass cools, and at a temperature that is commonly called the dew point, drops of moisture settle on the surface. As a result of the fact that the glass fogs up, there is no reflection of the body in the mirror, and it is not possible to use it for its intended purpose. This creates inconvenience for everyone: men and women, adults and children. After all, without using a mirror in the bathroom, it is difficult to put yourself in order.
There are quite a few ways to make sure that the mirror does not sweat. In the general case, they can be conditionally divided into technical and chemical. The technical ones are:
- arrangement of ventilation at the proper level;
- installation of a shower cabin that will prevent steam from escaping to the outside.
Heating the mirror in the bathroom can solve this problem.
Ventilation is one of the most effective means in order to get rid of excess steam and ensure that the mirror in the bathroom is not covered with droplets of moisture. The proper level of air circulation leads to the fact that the humidity of the air is significantly reduced, its temperature drops sharply, and the amount of steam in the room decreases. Then the conditions for the occurrence of the dew point disappear, and the bathroom mirror remains dry, the reflection in it is clearly visible.
Ventilation in the bathroom from excessive steam
In order to achieve required power air circulation, it is necessary to ventilation duct install an exhaust fan and connect it to the power supply. The device does not have to be in continuous operation, it can be turned on when required. In addition, the market offers ready-made special fans that start when the light turns on in the bathroom. The operation of such a fan can be recognized by the characteristic hum. Selection exhaust fan should be carried out taking into account the volume of the room and the size of the ventilation ducts.
There is also a local solution to the problem with the use of a fan. You can purchase a special device for blowing the mirror, its use will also give good effect. This is a small, inexpensive and low power fan.
shower cabin - good decision in order to isolate the steam from the rest of the bathroom space. It's not the best cheap way to ensure that the glass does not fog up, but the shower cabin also solves not only the problem of combating moisture. After its installation, the bathroom will become more comfortable for staying in it, problems with splashing water and the like will be solved.
Another one effective measure against fogging - heating of a surface of mirrors. If the air and the surface of the mirror have the same or close temperature, the dew point will again not arise, and the small but unpleasant inconvenience in the form of fogged glass can be avoided. In order to carry out heating, it is necessary to purchase a special device, install it and connect it to a power source. Such a device, which is also commonly called an anti-fog, comes in the form of about half a meter of wire with special threads for heating. It is attached to the back of the mirror and is connected to a household electrical outlet. The device consumes a minimum amount of electricity, so its operation will not be costly, especially since you can turn it on either as needed or when you turn on the light in the bathroom. In this case, the mirror will not fog up.
2
The anti-fog mirror is a long-standing problem, and not only experts in various areas knowledge. There are many so-called folk methods remove moisture from the glass. All of them have a different nature and operate with varying degrees of effectiveness. But as an improvised means, they are quite suitable for use.
Anti-fog for a mirror or glass is a special liquid that is designed for car maintenance. There, on glasses and mirrors, steam is also formed, exactly according to the same principles. Therefore, it makes sense to purchase such a tool and test its effectiveness on bathroom mirrors. To use the anti-fog, the instructions that come with it are sufficient. Most likely, you will be able to achieve a positive result.
Defogger for mirrors and glass Defog for mirrors and glass
The defogger consists of components that form on the glass thin film repelling water. As a result, water collects in large drops and flows down. Even if large drops remain on the surface, you can clearly see through them.
There is a shampoo in every bathroom. If before turning on hot water, rub the mirrors with shampoo and then wipe them dry, it will be possible to avoid fogging for a while. The mechanism is the same as in the case of the use of anti-fog. The resulting film does not allow water to stick to the surface. But shampoo is a water-soluble product, so it is for a short time will be washed away.
Glycerin is known to be found in soaps. It is absolutely harmless to humans, does not smell, does not irritate the lungs and, on the contrary, is good for the skin. In pharmacies, glycerin is sold freely and is inexpensive. They can also rub the mirror, and it will not fog up.
There are a lot of means for rubbing mirrors: vinegar, gelatin, shaving cream, etc.
Some of the ways to prevent fogging of mirrors last a long time, but require some investment, others are cheap, but less effective.
