≡× MENU

• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Which mattress to choose for an adult. Choosing a mattress: which is better? Which mattress is better to choose for a comfortable sleep

Every day we spend about 8 hours in a dream. Not only the morning mood and working capacity, but also health depends on how well the sleeping place is equipped. - that's only half the story. It is also necessary to choose a suitable mattress, because in case of an error, you will experience muscle and back pain, insomnia and even allergies. Do the right purchase not as easy as it might seem. Outwardly, all mattresses are very similar, but at the same time they can differ significantly in the type of filler, the presence of springs and other parameters. Let's try to figure out how to choose a mattress for a bed in order to ensure a healthy sleep and comfortable rest.

No. 1. Mattress size

The simplest thing is choosing the right size. It is enough to measure the inner perimeter of the bed by removing the old mattress:

The least problems arise when the bed and mattress of the same brand, and even bought at the same time.

No. 2. Mattress construction: spring or springless

A key characteristic of any mattress is the presence or absence of a spring block in it. Looking ahead, we note that both options can be used for permanent rest.

Mattresses on springs

Mattresses with a spring block are divided into two types:

Mattresses with dependent spring block have been produced for over 60 years. Their peculiarity lies in the fact that all the springs are interconnected. Springs are made from cold drawn steel wire and can be cone or cylinder shaped. To their main benefits include low price and high strength. disadvantages the design has more. Since all the springs are connected, the pressure on some of them causes an instant "response" in others. This effect is especially noticeable in double mattresses, when the difference in the weight of the sleeping people is more or less significant: one spouse will certainly roll down to the middle of the bed. A similar effect will be inevitable even for a single mattress. It turns out that the human spine will adapt to the curves of the mattress, and not vice versa.

In addition, "bonnel" type mattresses are pressed through in the middle part over time, and as a result, instead of a comfortable bed, it forms. If you want to choose an orthopedic mattress for healthy sleep, then a model with a dependent spring block is clearly not suitable. This is an option for rare use, for example, for a country house.

Independent spring block means that the individual springs are not only not connected to each other, but are also in their own fabric cover. Isolated springs perfectly adapt to a sleeping person, and the presence of a cover allows us to talk about the absence of squeaks. When one of the sleepers gets up or rolls over, the mattress springs under the other sleeper will remain motionless. No one will slide anywhere, nothing will sag over time.

This design allows you to provide excellent support to the spine and take its shape. The durability of such mattresses is on top, as is the price. Orthopedic mattresses are equipped mainly with an independent spring block.

depending on the number of springs There are the following types of mattresses:

The more springs and the smaller their diameter, the better the mattress will adapt to the body of the sleeper. If you need to choose a good orthopedic mattress, then it is better to take S-1000 or S-2000.

In addition to the traditional design of an independent spring block, there are Dual Spring mattresses. One spring is located in another, due to which optimal support is provided for people with different weights - a good option for a couple in which the weight of the partners is very different. Designed for overweight people reinforced block mattresses: the springs in them are made of thicker wire and are staggered. There are mattresses that are used in different areas springs with different degrees of rigidity. Due to this, maximum ergonomics are achieved, because the pressure exerted by the head and pelvis is different.

Springless mattresses

Such products consist of one or more layers of natural or artificial materials, whose rigidity can vary greatly. The simplest and cheapest option is a foam springless mattress. At first it will be comfortable, but very soon it will begin to slip. Mattresses show themselves better, where foam mixed with additives other materials, such as coir or latex. Latex foam mattresses are highly resilient and long lasting, but the most durable will be mattresses made entirely of natural latex or coconut fiber. These are elastic, elastic and hypoallergenic products. Depending on the combinations of certain materials the required level of rigidity is reached.

A high-quality springless mattress will cost a lot, but in terms of performance, it almost does not differ from a product with an independent spring block. Since there are no springs in it, no one will slide anywhere, and the problem of squeaking will be impossible in principle. This perfect option For . We also add ease of transportation, since the springless product can be twisted. True, under such a mattress, an orthopedic lattice of flexible slats is needed - most modern beds have such a base.

No. 3. Mattress fillers

No. 8. Mattress manufacturers

The name of the manufacturer is a guarantee of quality. Risking your reputation in an era when information on the Internet is distributed instantly, few people will. You can trust products of such brands:

When choosing a mattress, do not forget to test it personally, checking the quality of workmanship and rigidity. If the product is uncomfortable, then it will be clear almost immediately. And further. A mattress is one of the few things you shouldn't skimp on, as too much depends on the quality of your sleep.

The main function of a mattress is to provide comfortable conditions for relaxation, in which the body completely relaxes after physical activity. A wide range of products offered allows you to equip a bed in accordance with your preferences. However, it should be borne in mind that an incorrectly chosen bed can lead to serious problems with the musculoskeletal system.

How to choose?

To prevent possible health problems and create comfortable sleeping conditions, you should take into account all the details when choosing a mattress. It is advisable to consult with a specialist before purchasing, who will give recommendations regarding

• product type,
• used in the manufacture of fillers,
• degree of hardness.

It is necessary to take into account the size (it must correspond to the parameters of the bed) and the type of cover.

Useful tips on choosing a quality mattress can be obtained by watching the video. They will help you make the right choice.

Construction types

Orthopedic mattresses have various designs. They are divided into two large groups:

• spring,
• springless.

Each type has its own advantages and disadvantages. A detailed analysis of each type will allow you to make the right decision when choosing a product.

Spring structures

Mattresses based on spring blocks are the most in demand. Buyers are attracted by a longer (compared to springless) service life. Spring structures have an anatomical and orthopedic effect. Some use dependent blocks, while others use independent blocks. The choice depends on the desired degree of comfort.

With dependent spring blocks

Mattresses with a base of Bonel dependent spring blocks are softer, following the contours of the body. A similar effect is achieved thanks to large springs interconnected.

Steel structures have sufficient elasticity to provide optimal support for the body during sleep. Such products are almost hollow inside. They are well ventilated, which is their main advantage. Another important plus is the affordable price.

Among the shortcomings, it is necessary to single out the unpleasant effect of the “wave”, which is formed during the interaction of the springs, and the metal creak that appears during operation.

With independent spring blocks

Independent spring blocks are more popular, despite the higher price. They have high orthopedic properties, perfectly support the spine and contribute to complete relaxation.

The connection of the springs in them is carried out according to the "pocket" technology. Each of them is placed in a special pocket and does not come into contact with neighboring steel structures, which gives the product a point elasticity. As a result, there is no wave-like interaction between the springs. If one sleeper turns in his sleep, he will not disturb the person lying next to him.

Independent springs do not come into contact with each other, which eliminates the metallic clang and promotes a peaceful rest.

The disadvantage of this type is one - a rather high price, but it is fully offset by their merits. In addition, it is undesirable to jump on them, which should be taken into account when small children grow up in the house.

Springless designs

Springless mattresses, unlike spring mattresses, have a long history. To create comfortable conditions for sleeping, they were stuffed with straw, cotton wool, feathers (featherbeds). Modern orthopedic products use natural and high-tech synthetic materials. They give a higher degree of rigidity and increase useful features sleeping place.

There are three types of orthopedic mattresses - monolithic, mixed and puff. The first are made from a single filler. The latter, in addition to the main block, have two outer layers made of other materials. Still others consist of alternating layers, providing varying degrees of stiffness, which depends on the fillers used.

Keep in mind that spring mattresses do not like wet cleaning. Purchasing a product with a removable cover will solve this problem.

Fillers

Fillers - artificial and synthetic materials used as an orthopedic base. Each of them has its own advantages and disadvantages. The choice depends on the purpose for which the bedding is purchased.

Polyurethane foam (PPU)

Polyurethane foam is an artificial filler that can create the conditions necessary for a comfortable full sleep. Modern practical material.

• has high orthopedic properties, is able to take the contours of the lying body;
• hypoallergenic, does not cause skin irritation;
• has a cellular structure and is well ventilated;
• Easily rolls up for easy storage and transport.
• affordable.

• does not have.

Latex natural

Natural latex is made from natural tree sap, used in quality sleep products. The price is quite high, but justified.

• high orthopedic characteristics;
• different density and, consequently, stiffness;
• hypoallergenic characteristics;
• long (up to 30 years) service life.

• the high cost of mattresses.

A quality product made from natural latex cannot be cheap. Low price speaks of the use of low-quality artificial materials.

latex artificial

Artificial Latex - modern material, which is an analogue of a natural filler, but having a lower cost. In terms of quality, it is similar to natural.

• does not cause allergies, except in cases of individual intolerance;
• has a higher (compared to natural) rigidity and weight;
• has excellent orthopedic characteristics.

• the service life is less (about two times) than that of natural latex.

When buying a mattress made of artificial latex, it is recommended to take into account that it will last less than a product made of natural material. If it will not be used for a baby bed, it makes sense to purchase a higher quality bedding.

Struttofiber

Struttofiber is an artificial filler made from polyester fiber. A high-tech material used as the base for orthopedic products. Its high wear resistance can significantly extend the life of the product, which used layers of softer materials.

• does not cause allergies;
• practical;
• has a long service life.

• does not differ in low price, but is cheaper than natural materials.

When buying, you should beware of fakes and purchase goods from trusted manufacturers.

Memoryfoam is a modern high-tech material that appeared on the market about 20 years ago. It is a dense foam with a memory effect. Sleeping products from it are able to take the shape of the body lying on it and keep it. A person sleeping on such a mattress, turning around, will take the previous position, which means that his spine will experience less stress.

• has a long (up to 15 years) service life;
• does not rot;
• well passes air;
• retains its quality characteristics throughout the entire period of use.

• rather high price.

coconut coir

Coconut coir filler is a layer of compressed soft fibers of the walnut intercarp.

• passes air and moisture;
• does not undergo putrefactive processes due to the presence of lignyl in the composition of the natural polymer;
• has antibacterial properties;
• prevents the reproduction of ticks;
• differs in the long term of operation at observance of rules of use.

• bedding made of coconut coir is not recommended to be rolled up, otherwise the material crumbles and becomes unusable.

Coconut has a high degree of hardness. It is recommended for newborns, teenagers and people with musculoskeletal problems who need a firm sleeping surface.

Sisal

Sisal is a natural fiber obtained from dried agave leaves. For filler, it is pressed and impregnated with latex. The material is highly durable. As early as the 16th century, it was used to make ship ropes.

• is highly resistant to wear;
• does not break when folding;
• has high orthopedic characteristics (capable of taking the contours of a sleeping person, creating comfortable conditions for relaxation;
• suitable for people with a large weight;
• well ventilated;
• resistant to moisture.

• high price.

Ormafoam

Ormafoam is a resilient and elastic artificial filling for mattresses. It is made from polyurethane foam using modern technologies providing the material with environmental safety.

Ormafoam has high orthopedic properties. It is recommended for people suffering from diseases of the spine or in need of maintaining correct posture.

• the material has a cellular structure, which allows it to perfectly pass air and moisture;
• has a massage effect that improves blood circulation in the epidermis;
• elastic;
• does not cause allergic reactions(recommended for children's mattresses);
• has a long service life;
• affordable price.

• does not have.

Batting

Batting filler has been used for over a century.

• low price.

• does not have orthopedic characteristics;
• wears out quickly;
• takes a long time to dry after wet cleaning.

Currently, bedding with this filler is not in demand, but the material is used as a layer in other types of orthopedic mattresses. For example, it will reliably protect the skin from the prickly surface of coconut coir and make sleep more comfortable. It is also used in spring mattresses, stacked between metal blocks and outer, softer layers.

Felt

Felt is a natural filler in the form of panels of various thicknesses, made from sheep's wool.

• the material does not cause allergic reactions;
• passes air;
• perfectly retains heat;
• has a low price.

• absorbs and accumulates moisture, which contributes to the development of putrefactive processes.

Today, manufacturers prefer to use it as intermediate layers. When purchasing a product with felt, you need to remember the disadvantages of this material.

wool fiber

As a wool fiber filler, raw materials obtained from sheep or camels are used.

• has hygroscopic properties;
• retains heat;
• does not generate static electricity;
• does not cause allergies;
• modern manufacturers treat the fiber with lanolin before using it, which increases its antibacterial characteristics.

• wool-filled mattresses do not have orthopedic properties.

If there is no goal - the acquisition of a bed with such characteristics - this product will perfectly cope with the task of providing coziness and comfort during sleep. Another advantage of the material is an affordable price, which is also important.

Orthofiber

Orthofiber (also known as holofiber) man-made fiber is widely used as a filler. Orthofiber is a hollow fiber, which prevents it from caking and prolongs the life of the product. According to its quality characteristics, it is not inferior to natural materials.

• the material is hypoallergenic;
• does not absorb moisture;
• ventilated;
• retains heat, which provides a comfortable sleeping environment.

• quickly compacted under constant significant loads.

Cases

Modern mattresses are necessarily produced in covers. They perform a protective function, preventing the rapid wear of the filler, and provide a pleasant interaction of the skin with the surface of the bed.

It is important to pay attention to this particular property of the cover when buying. It should be made of dense (and at the same time pleasant to the touch) natural cotton fabric. Jacquard products are especially popular.

The second characteristic that is important when buying is the ability to remove the cover. Manufacturers use two types of them: removable and non-removable. Which ones to give preference? The video will help answer this question:

Removable covers

• easy to care for;
• can be washed, which keeps the perfect look of the bed for a long time;
• when buying a mattress, a removable cover with a zipper will allow you to evaluate the internal content of the product: whether it corresponds to the one declared by the manufacturer.

• loosely attached to the base of the mattress, which contributes little to extending the period of use;
• after washing, the cover may shrink and become small for the mattress.

Fixed covers

• non-removable covers are additionally attached to the surface of the mattress with a special adhesive and securely hold the inner stuffing.

• the impossibility of washing it is a significant drawback, but the use of a special mattress cover (including waterproof) will help solve this problem.

Rigidity

Orthopedic mattresses are offered in three degrees of hardness:

• high,
• middle,
• low.

If it's not about small child or a person with musculoskeletal disorders that require hard surfaces, then the choice of hardness depends on personal preference.

Those who like to sleep on their side are not recommended a mattress with a high degree of rigidity. They do not allow the spine to take a comfortable horizontal position and relax. A sleeping surface with medium hardness (latex, memorix) will be the most comfortable.

Dimensions

Parameters are another important criterion when choosing it. The product must match the size of the bed. Modern manufacturers offer mattresses in three sizes: single, one and a half and double.

Single - most often used for teenage beds. Double - preferred by couples. One and a half - are considered universal and can be used to equip a comfortable bed for one adult.

Where to buy a mattress so as not to be mistaken

There are a large number of mattresses from various manufacturers on the market. Can all offers be trusted?

First of all, it is worth paying attention to the well-known retail chains having numerous positive reviews. They have been on the market for a long time and care about their reputation.

Today, there are brands on the market whose products are trustworthy.

TOP 10 mattress manufacturers

Especially popular on the market are mattresses of both domestic and foreign manufacturers. The products of the following companies are considered the most popular:

1. Ascona. More than 25 years on the market. Offers high quality springless and spring mattresses. Their products are different original design and long service life. High prices on the model of this manufacturer do not detract from their merits.
2. Ormatek. One of the leading domestic manufacturers sleep products. Wide price range big choice quality products with natural and artificial fillers.
3. Dormeo. The company presents on the market spring and springless mattresses of decent quality at a reasonable price. Uses both natural and artificial fillers. The buyer can always choose a product that meets the requirements.
4. Relax. The company has been on the market for seven years. Affordable price. The manufacturer uses spring and springless blocks own production, which compares favorably with the cost of production.
5. Vegas. The company offers spring and springless mattresses with varying degrees of firmness. They use mainly natural materials, which makes their products expensive.
6. Consul. The manufacturer offers premium products. Excellent quality, application advanced technologies but high prices.
7. Barro. The Belarusian company presents mattresses with dependent and independent springs on the market. The best option compromise between price and quality.
8. dreamline. Represents a wide selection of anatomical mattresses with artificial and natural fillers. Distinguishing feature - good quality and affordable prices.
9. Magniflex. An Italian company well known in domestic market. Offers vacuum-packed memory foam mattresses. High prices are the only negative of their products.
10. Toris. A domestic company operating for 25 years on the market. High quality, reasonable prices. Has a subsidiary that manufactures budget options popular mattresses.

Buying a mattress important step. From its correctness depends on how comfortable the sleep and good rest of the owner of the product will be. Experts do not advise to rush into the choice: decide what exactly you need, analyze the market offers, get acquainted with the reviews. Based on the information received, it will be easier to make a choice. The main thing is to take into account all the parameters: stiffness, size, materials used, reputation of the manufacturer and seller.

You have become the proud owner of a new mattress - take care of its care. Failure to follow the operating rules will lead to rapid wear, and high-quality expensive thing will end up in a landfill.

1. Read the instructions carefully.
2. Remove the packaging and leave in a ventilated area for two days to eliminate the industrial smell.
3. Make sure the mattress is the right size for the bed. Even a slight (up to 2 cm) deviation can lead to product deformation.
4. During use, it is recommended to turn the mattress over so that its sides wear out evenly.
5. The surface of the mattress must be cleaned regularly, and if necessary, remove stains with special non-aggressive agents. If there is a removable cover, wash it by hand to avoid shrinkage.

Follow the basic rules for caring for a mattress, and it will last a long time.

The mattress is a product which guarantees you a quiet sleep and comfortable rest. From him right choice depends on how well you will feel for the next few years and with what mood you wake up in the morning.

In order to have a good rest at night, you need to go to bed on comfortable bed. First of all, it should have a good mattress. Customer reviews indicate that this is not easy to do. The product does not belong to the category of frequently bought, so a mistake in choosing can be expensive.

What threatens the wrong mattress

In addition to morning stiffness, insomnia, the owners of an improperly selected mattress are expected to experience chronic diseases such as arthritis, osteochondrosis, and asthma.

Sometimes people suffering from diseases of the spine lie down without a mattress at all. But in this case, for a long time, the body is curved in one direction. It's harmful and inconvenient. A universal mattress should be comfortable first of all.

Manufacturers call their products anatomical, or orthopedic, medical. They indicate that they bend according to the bends of the human body. But the same product is not anatomical for people of different weights and heights. And it should be anatomical only for you.

The functions that the mattress performs

What are the requirements for this desired product?

• The mattress should support the back while sleeping strictly horizontally. The basis is responsible for this function. It can be spring blocks or latex.
• The comfort of sleep, which gives the filler and coverage.

What mattress to look for

It largely depends on the weight of the person. If you are not overweight, soft and medium soft mattresses are suitable for you. If you can be considered full, then hard or medium hard is more suitable. If you are looking for children's mattress, reviews advise buying a more rigid model.

When looking for a mattress, carefully measure your bed. The mattress should not be wider than her. The optimal width will be a couple of centimeters less.

Look for a mattress with jacquard upholstery. The cover must have a padding polyester lining. You can buy a mattress with a zippered cover. But customer reviews say that they quickly lose their shape.

If you do not find a suitable one, you can order.

Mattresses without springs

All mattresses without springs are divided into hard, medium hard and medium soft. They usually consist of several layers. The characteristics of each of them determine the quality of the entire product.

Mattresses without springs can be made from whole latex, which is vacuum-packed. Latex can be natural or artificial.

Reviews of mattresses indicate that latex is softer than polyurethane foam, although both types are quite comfortable and have the necessary elasticity. True, a product made of natural latex is much more expensive.

Apply natural sheets of coir - coconut fiber. But they are quite rigid, so they are not suitable for people weighing over 100 kg.

Liquid and air can be used as a filler.

You should not think that such products are worse than spring mattresses. Reviews of many buyers say that they like just such an unusual filler much more. Some people don't like how the springs work.

Spring mattresses

In a mattress, the springs are usually connected in blocks. If they are interconnected, intertwined, such springs are called dependent. An example is the Bonnel mattress. It can withstand heavy loads, has a low price. And yet, reviews of mattresses of this type say that these are the most uncomfortable models. That is why medical experts do not advise people with spinal problems to purchase them.

Among the shortcomings can be called the accumulation of dust inside the mattress, the appearance of rust on the springs, sagging. Insects can start up there and various microorganisms and even electromagnetic radiation can accumulate.

In products with independent blocks, each spring is in its own fabric compartment. Therefore, each of the springs is bent under the influence of a specific part of the host's body, without dragging the neighboring ones along with it. They, in turn, also bend to a certain depth. Therefore, during rest, the vertebrae do not experience unusual static loads.

The standard is the number of 256 independent springs per 1 m 2. The price of such a mattress is about 10 thousand rubles.

However, not all mattresses are the same. in expensive and quality models there may be several zones of elasticity intended for various parts body.

Expensive models, the price of which reaches 70 thousand rubles, for one square meter up to a thousand springs. Models with 500 springs per m 2 can be bought for 30 thousand rubles. This mattress gives you the opportunity to relax and protects the spine from curvature. It is considered optimal for sleep.

The quality is also affected by what types of blocks have spring mattresses. Reviews say that the most comfortable and high-quality blocks are called "honeycombs", "spring in a spring" and multi-zone. It is they who need to pay attention to people weighing more than 100 kg. They are also suitable for double beds.

The springs are usually not felt when using a spring mattress. This is due to the presence of interlayers, with the help of which its rigidity and elasticity are regulated. In expensive models, Nasa technologies are used and the viscous and at the same time elastic material created with their help - "tempura". He not only bends to the shape of the body, but also remembers it.

The assembly of such a mattress and its adjustment is not an easy task, requiring certain skills and craftsmanship. Therefore, the price of such high-tech products is usually more than a thousand dollars.

Unfortunately, they are also susceptible to corrosion, collect dust and have the same disadvantages as previous models.

Fillers

The filler can be such traditional natural materials as felt, wool, horsehair, and artificial (foam rubber, synthetic winterizer). Mattresses are also filled with more modern latex, coir. Which to choose? Reviews say that the mattress will be soft if it is created from layers of latex 3 cm high. If there is a layer of coir on the block, then its surface will be quite hard. And in the presence of 3 cm of latex, one - coir, and then a spring - you get a mattress of medium hardness.

In order for air to move freely throughout the volume of the mattress, many models have ventilation holes.

When buying products from such materials, you need to ask for certificates of conformity.

Mattress base

A high-quality mattress base consists of a frame to which wooden lamellas are attached - elastic boards about 1 cm thick. In cheaper models, it is made of plywood.

The base on the lamellas is springy, which is why it is more comfortable to sleep on the bed than on a hard surface (the same plywood). Under it, air passes better.

Still thinking which one to choose? Consumer reviews are advised to try to lie on it in the trading floor. Therefore, you need to go there in clothes that are comfortable for this.

But lying on one model will obviously not be enough to decide which mattresses are better. Customer reviews say that you need to try at least three models. Only then will you be able to choose the best of them or look for more.

The mattress should not be too soft, because the spine will sag while sleeping on it, and in the morning your back and head will hurt.

Maybe you need to choose very hard mattresses? Customer reviews say that they do not get enough sleep on them, they do not rest during the night.

You need to determine how long you have to toss and turn on the mattress in order to lie comfortably. A quality product does not require too many movements for this.

You need to pay attention to how much the mattresses cost. Customer reviews say that the cheapest one worth buying should not be cheaper than 12 thousand rubles. Otherwise, you run the risk of getting a thin product made of low-quality materials that will not be able to provide support to your spine.

A high-quality mattress will serve you for at least 10 years and will fully justify itself. A cheap one will soon fall into disrepair, and you will need to spend money again.

Manufacturers

Which mattress is better to choose? Consumer reviews are advised to pay attention to such manufacturers:

• Vegast is a Belarusian brand, one of the most bought. Produces mainly budget models. Many people like them. But there are reviews that the quality of products does not match the price. The main complaints are that the mattress quickly loses its shape and all characteristics.
• "Ascona" - Russian manufacturer. Engaged in the production of orthopedic mattresses. Consumer reviews indicate that company representatives often commit negligence in work, and products are defective.
• "Ormatek" - produces high-quality springless mattresses made of latex, cheaper than Asconov. In addition to products of the usual form, it offers models for round beds.
• Atmosphere is an English manufacturer of expensive but high-quality orthopedic mattresses.

Where to buy

Modern people make more and more purchases through the online store, they also buy mattresses. Customer reviews say it's fast and convenient. No need to spend a lot of time shopping. Sitting at home, you can choose the model you like, and even save money.

The only, but very significant drawback may be that you will not be able to test it before buying. And what to do after your mattress is uncomfortable?

Such purchases may be justified if you already have a mattress from such a company, but you decide to purchase another one or have tested it with relatives or friends.

The quality of night rest directly depends on the choice of an anatomical mattress. That is why it is so important to choose the perfect bed from a trusted manufacturer. The Askona factory offers spring and springless models manufactured according to all quality standards and approved by Roszdravnadzor and CITO. And our qualified consultants will tell you how to choose a mattress, taking into account the physiological characteristics and personal preferences.

What to look for when choosing?

The design of the anatomical mattress

Mattresses are divided into two types - spring and springless. When choosing an option with a spring block, you should pay attention to the number of springs. The optimal density is 550 pieces per bed. The more springs per bed, the better the anatomical effect of the mattress.
The spring block, in turn, is divided into two types:

• Dependent spring block. Such a block has a continuous weave that connects all the springs to each other. The advantage of such structures is their relatively low price and strength. They withstand heavy loads, but practically do not have the necessary anatomical effect.
• Independent spring block. Independent springs are the most important component of an anatomical mattress. Each spring is in an individual case and works autonomously. Thus, only those that are directly loaded are bent under pressure. This allows you to maintain the spine in an anatomically correct position, eliminating the "hammock effect".

How to determine which mattress to buy - with a dependent or independent spring unit?

Mattresses with dependent and independent spring block have a significant difference. The latter have a great anatomical effect, and better adapt to the contours of the sleeping body. Despite the low price, mattresses with "" springs are recommended for short-term use, for example, in the country or as a guest option. Due to the continuous connection of the springs, the dependent block has a “wave effect”, since when pressure is applied to one, the adjacent ones are also activated. This leads to the fact that the spine adjusts to the curves of the mattress, and not vice versa. In addition, a person with a smaller weight may roll towards a larger partner.

In anatomical mattresses with an independent spring block, the “wave effect” is excluded. The weight of the sleeper is evenly distributed over the entire surface and the spine assumes the correct position. Thus, independent springs provide full uninterrupted rest and support posture.

Recently, springless mattresses have become increasingly popular. They are assembled from one or more layers of materials, both natural and artificial. Combination various materials provides different degrees of firmness of the mattress.

Due to the variety of models, the question often arises, which mattress is better - spring or springless? It is difficult to answer this question unambiguously, because each of them has a number of advantages.

Spring mattresses withstand heavy loads and are highly wear-resistant. They are well ventilated and adapt as accurately as possible to the contours of the body of the sleeper. Springless models, in turn, do not accumulate static electricity and are not at risk of squeaking due to lack of metal structures in its composition. They can be used on various convertible bases and are also easy to transport as they can be sold rolled up.

Before choosing a spring mattress, you should pay attention to the maximum permissible load for one bed. Partners with a significant difference in weight should choose mattresses with an independent spring unit and no load limits. This will help to avoid the appearance of a “wave effect” and will individually distribute the pressure of the mass of each sleeper over the surface of the mattress.

The anatomical mattress is selected according to the level of rigidity. Depending on it, the models are divided into:

• Soft. The softness of the mattress is given by various comfortable layers - latex, anatomical foam, holofiber, etc. more materials located above the spring block, the softer the mattress becomes. Such models are suitable for people with a fragile physique and the elderly. In some cases, they are also recommended for diseases of the lumbar region.
• Medium hard. Medium hardness is achieved through a combination of hard and soft fillers. Coconut and sisal are usually used as a rigid base, and comfort is provided by a layer of anatomical foam or bulky stitching. Such mattresses are universal and suitable for both children and adults.
• Rigid. In rigid models, materials such as coconut coir, sisal, thermally bonded linen predominate. Such mattresses can have a reinforced spring block, which allows them to withstand maximum loads. Recommended for people with a high body mass index, as well as problems with posture.
• Versatile. Such models can have different degrees of rigidity of the sides. This allows you to flip the mattress depending on the season and change the comfort.

Which mattress is better - soft, medium or hard?

The rigidity of the anatomical bed is selected individually, depending on the age, weight and preferences of the person. The heavier the sleeper, the firmer the mattress should be. Not only comfort during sleep depends on this, but also the service life of the product, because in rigid models, materials that are more resistant to loads are used, which exclude early deformation.

Reinforcement around the perimeter

An additional box of anatomical foam around the perimeter of the mattress avoids deformation throughout the entire service life. It also protects the spring block from damage and creates comfort when sitting on the edge of the mattress.

Size

When choosing a size, you should rely on two criteria - the spatial capabilities of the bedroom and physiological features person. The sleeper should not rest his feet on the foot of the bed. The length of the mattress should exceed the height of a person by at least 15 cm, and the width of the bed should be equal to twice the width of the shoulders of the sleeper. With proper selection, nothing will interfere with a good sleep.
Mattresses can be single, one-and-a-half, double. Each type has its own standard sizes:

single: length - 190-200 cm, width - from 80 to 90 cm;

one and a half: length - 190-200 cm, width - from 120 to 140 cm;

double: length - 190-200 cm, width - from 160 to 200 cm.

When choosing a bed for a child, there are some nuances, because children's mattresses have several types:

• For newborns . Such mattresses are made for cradles and provide support for the child in the first years of life. The length of the models is from 100 to 120 cm, and the width is 50-60 cm.
• For young children. When the baby grows out of the crib, the cradle mattress changes to a full one. For children of preschool and school age, it is better to choose models from specially designed children's collections. They have standard sizes, but are made from materials adapted to the children's body.
• For teenagers. Teenage models are characterized by a high degree of elasticity, which allows the development of a fragile spine.

Brands

In the assortment of our online store you can find mattresses of different brands, both domestic and foreign.

(Russia). Our own branded mattresses have been developed by leading sleep experts. The range of models includes both spring and springless products of different price categories. Askona brand models are certified by Roszdravnadzor and CITO.

The importance of a good night's rest is hard to overestimate. One of its conditions is quality bed dress especially the mattress. Today there are many modern models, differing in type, filler, purpose. We will figure out which mattress is better to choose, expert reviews and customer opinions will help with this.

Before finding out which mattress manufacturer is better to choose, consider their varieties. There are two types of "bedding" for the bed - springless and spring.

Spring Models

The support of the human body is provided by metal spirals of varying degrees of elasticity. Products are divided into two types - with a dependent spring block and an independent one.

Dependent unit (Bonnel system)- a mesh consisting of a large number of intertwined two-cone four- or five-turn springs, which are fastened with a rigid frame. There are 100-150 large spirals per 1 m 2 of the canvas.

Advantages:

• ease of manufacture;
• low price;
• adaptability to heavy loads.

Flaws:

Independent unit (Pocket Spring system or other modifications thereof) consists of many springs, each of which is packed in a separate fabric bag. Spirals are thinner in diameter than in the dependent block. Each of them has from 6 to 9 turns. In 1 m 2 of the canvas, there are 220-260 springs. Elements with different firmness are used in different areas of the mattress to provide the most correct support for the body.

Advantages:

• springs do not rub against each other and do not creak;
• there is no wave effect - only those spirals that are under pressure are compressed;
• durability;
• orthopedic effect;
• long-term shape retention.

Flaws:

• the risk of damaging the structure if you jump or walk on the bed;
• possible metal corrosion and dust accumulation inside;
• relatively high price.

Springless mattresses

Springless mattresses do not contain metal elements. They are made from one (monoblock) or several types of materials, laid in layers or sections. Fillers have characteristics such as resilience, elasticity and breathability. The most commonly used are latex, coconut coir, polyurethane foam, horse hair, dried seaweed, and so on.

Advantages:

• comfort;
• uniform body support;
• no wave effect;
• low allergenicity (in most cases);
• withstand weight up to 140 kg (weight limit depends on the material);
• noiselessness;
• durability;
• do not accumulate static electricity.

Flaws:

• the degree of elasticity is lower, and the rigidity is higher than that of spring models;
• specific smell;
• high price;
• the appearance of depressions in the shape of the body is possible.

Tip: It is better to choose mattresses with the "bonnel" system as a temporary option (for guests, in the country). For permanent use, products with an independent spring block and springless are more suitable, especially if there are problems with the spine.

Fillers

When figuring out which stiffness is better, it is worth remembering that this indicator largely depends on the filler. In spring products, it is placed between the metal block and the upholstery; in springless products, it is the main material. The functions of the filler are the redistribution of loads, the absorption of moisture, the provision of a certain degree of hardness and thermal conductivity.

Main types:

Combinations of fillers, for example, latex + coir, have the best consumer properties. In addition, the “winter-summer” options are convenient, when a “warm” layer (wool) is located on one side, and a “cold” layer (cotton) on the other.

Case

In search of an answer to the question of which mattress is better to choose and how to do it, judging by the reviews of experts, one should pay attention not only to the type of construction and filler, but also to the cover material. Its mission is to protect inner part products from moisture and pollution.

Covers are removable and non-removable. The former are closer to the filler, the latter are easier to clean. They are made from natural (cotton, linen, wool) and synthetic fabrics. Natural materials have high thermal conductivity and hygroscopicity, but it is more difficult to care for them than artificial ones. It is best when the product combines natural and synthetic fibers (synthetics should be less).

Covers are additionally impregnated with special substances that repel moisture and increase durability. According to experts, the best upholstery fabric for mattresses is jacquard.

Features of choice

When thinking about which orthopedic mattress is better to choose, you should understand the essence of this concept. The orthopedic product provides support for the spinal column in a physiological (flat) position. The mattress follows the contours of the body and does not allow the spine to sag or arch. As a result, all vertebrae, muscles and ligaments are unloaded.

Important: The ability to properly support the body depends not only on the design of the mattress, but also on the parameters of the person. Bedding must be selected individually.

When solving the problem of how to choose the right orthopedic mattress, one should take into account the height, weight, age, preferences and condition of the future owner's musculoskeletal system.

• Mattresses with reinforced independent springs or springless ones with a thick layer of coir are suitable for people with a lot of weight.
• Thin men and women should prefer latex mattresses or soft spring models without interlayers that increase rigidity.
• With an average build, it is better to choose models with independent springs or a combination of coir and latex.
• At a young age, springless options are most preferred. Coconut-filled beds are suitable for babies, which are well ventilated. Older children and teenagers need models of medium hardness made of artificial or natural latex.
• Elderly people are recommended mattresses of low and medium hardness.
• Mattress manufacturers indicate what maximum weight they are designed for. It is worth taking a product with a margin of weight.

For problems with the musculoskeletal system, the following nuances should be considered:

• if the lower back hurts, models that take the shape of the body are more suitable;
• for diseases of the thoracic spine, hard mattresses are preferable;
• the maximum orthopedic effect, which is necessary for osteochondrosis and other ailments of the spine, is possessed by products with independent springs and springless latex with a thickness of at least 17 cm;
• you should not choose a mattress that is too hard without a doctor's recommendation; it does not provide a natural position for the spine and puts pressure on certain areas, disrupting blood circulation in the soft tissues.

Read also:- types, features of choice.

When choosing a mattress in a store, you should definitely lie on it. to evaluate its stiffness, resilience and comfort. In addition, you need to measure the bed with a tape measure, so as not to miscalculate with the dimensions. Sleeping area should be a maximum of 2-3 cm more than the mattress. The length of the mattress should exceed the height of a person by 15 cm.

Popular manufacturers

When figuring out which mattress company is better to choose, you need to pay attention to reputation. You should not save on the purchase, because the bed for the bed is purchased for a long time and directly affects the well-being.

The most demanded Russian and world trade marks:

• Askona (Russia). It produces universal models, as well as unique developments. Askona Silver is a mattress with three zones of spring blocks, silver ions and silk proteins. Askona Mediflex - bedding for people in need of rehabilitation due to diseases of the musculoskeletal system.
• "Ormatek" (Russia). The most famous series of Season mattresses are double-sided beds with varying degrees rigidity. In addition, latex mattresses, which are sold at a relatively low price, are popular.
• "Consul" (Russia). Produces different types of mattresses. The most popular models are based on independent springs, they use latex and coir as a filler.
• Primavera (Italy). It produces high-quality orthopedic mattresses with various fillers. Warranty for products - 12 years.
• Studio-Moderna (Slovenia). Is a manufacturer of widely advertised springless mattresses Dormeo. When creating them, inexpensive high-tech synthetic fillers are used.

If the question arose of which mattress company is better to choose, the reviews show that the most durable and high-quality products are produced by the Ascona, Ormatek, Consul, Primavera, Atmosphere, Sleepeezee, Vegas brands.

Choosing a mattress is a difficult task. When solving it, it is worth considering not only the reviews of specialists and consumers. It is important to check the comfort of the product on yourself, as well as take into account the parameters of the body. If you have problems with the musculoskeletal system, it is advisable to consult a doctor. He will be able to advise the optimal degree of firmness of the mattress.

tweet

Pin it

1. Natalie
2. Maria
3. Nikita
4. Kovalev. E
5. Alex
6. Victoria
7. Gorelova Anya
8. Nika Volkova
9. Natalia
10. Ivan Kuznetsov