• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Do-it-yourself coasters for weaving roses. Step-by-step instructions for making supports for climbing roses and tying a plant to them. Photos and care tips. Topical questions about vertical gardening with roses

Nothing decorates a suburban area like fresh flower arrangements. That is why homeowners usually start spring work from the improvement of the territory and the arrangement of flower beds. Climbing roses are a graceful, magnificent decoration for any exterior. suburban area. However, such a refined culture must be placed on a stable support. Only in this case, the flowering of the rose will become a real decoration of the garden or yard. Next, you will learn about different varieties climbing roses, as well as how to make a support-frame for it with your own hands.

Features of growing climbing roses

The rose is known to be the queen of flowers. No one even tries to challenge her title, because this flower is graceful and perfect in its bright, exquisite beauty. The scent of a rose is her second undeniable dignity: it envelops, fascinates, attracts.

In hot climates, climbing roses can grow up to 10 meters, but in temperate latitudes - up to 3-4 meters.

Mesh trellis

Such a support can be easily made with your own hands. To do this, you need to dig poles made of wood or metal at the required distance, then stretch the mesh. In order for the design to fit perfectly into the design of the site, it is better to paint the pillars in suitable color.

Mesh trellis

The trellis can be made from wooden planks, securing them with a grid between the bars. A similar design for a climbing rose will allow you to form a spectacular bush.

Arches and pergolas

These designs are the ideal solution for arranging spacious summer cottages. Arches and pergolas can also be made by hand. Pergolas are a lattice roof fixed on pillars. The dimensions of such a support are calculated individually and depend on the design idea. Poles can be wooden or metal. The advantage of a pergola is that this support can also serve as a pergola. You may also be interested in construction technology country gazebo from glued beams, see details.

Arches differ from pergolas in their smaller size and curved shapes. They can be installed at the entrance to the garden or for the purpose of decorating the surrounding area. For the queen of flowers, forged or wooden arches are often made.

Poles with supports

Such supports can also be made by yourself from wooden or metal rods and poles. Pillars for creating supports are very convenient: compact, not very wide. They are often used as supports for roses that climb slowly. Any poles are suitable for a climbing queen: in the form of a column, cylinder or cone.

At climbing roses there are no antennae or suckers, so without additional supports they will not be able to grow upwards.

In order to build a cone-shaped support, you need to install several wooden rods or bars in a circle and connect them at the top. Such a stand is suitable for any curly flowers.

Other types of metal supports

There are many other varieties of supports for climbing roses. Let's consider a few more options:

• support "striving up" has the form of a tower, made of a metal base; inside the structure there is a stand for a container in which it will grow fragrant flower. Such a "tower" will look especially good on an open terrace;

metal support

• metal column: versatile and reliable. As a rule, it is made of galvanized steel, which makes it strong enough and resistant to damaging effects. environment construction.
• "Eiffel Tower": this support is a crossbeam with an openwork structure, ideal for the side shoots of a rose.
• flip arcs: they can be placed on both sides of the track. A natural corridor is created, the roof and walls of which will be gracefully braided with roses. If you still install benches, then such a flowering support will allow you to make cozy place for relax.
• prop-wigwam: suitable for a garden decorated in the style of the Indians. To do this, you need to weave a cone from a willow or birch bark with a sharp crown, to which the roses will reach with their shoots.
• "Steel Obelisk"- This is a support made of pipes. Ideal for roses, roses, characterized by unhurried vegetation.

Video

An example of creating a support for a climbing rose with your own hands, see the video

Conclusion

So, making supports for climbing roses on your own will not be difficult. It is enough just to evaluate the variety of rose that needs support, and general style site. What to choose as a support for your beauty depends on your design idea. As for the plant variety, it should be selected depending on the climatic zone and landscape. If necessary, climbing species can be combined with.

Made in different configuration. For several centuries, the art of erecting sheds, arbors, arches from lattice structures, entwined with greenery and clematis flowers, has been honed. The pergola got its start as a support for grapes and later became popular among gardeners.

Requirements for supports for roses

Before planting in the country, you need to get rid of the stereotype that they themselves will find where to catch on. Qualities necessary for arranging a pergola:

1. Design reliability. The flowering climbing bush is very heavy, so the supports must be stable and strong. It is advisable to dig in the bearing part and then attach lattices for climbing roses.
2. decorative design. A rose is a flower of marvelous beauty, and it should harmoniously fit into landscape design.
3. Correspondence to each variety of flowers. Delicate, light and petite lattices are more suitable for small low flowers such as clematis. Bulky structures, arcades, gazebos are designed for tall climbing roses.
4. Compactness. Not everyone can afford to small area set up a gazebo. But a small prop, tripod or original arch at the entrance, entwined with roses or clematis, available to everyone.
5. Profitability. This is a simple design, and you can assemble a pergola with your own hands from improvised material. There are similar metal structures on sale, but, firstly, they are not cheap, and secondly, what is on sale does not always fit the layout of the site.

Most often on small garden plots are used to facilitate the placement of a weaving rose next to any building.

Materials for making a pergola for roses

Most owners of dachas, private houses and cottages are building different kind pergolas and awnings, not intending to make simple design from pipes and planks to plant some climbing roses and other climbing plants. Pergola is not just a subject for maintaining clematis. covered decorative flowers, she can:

• perform the function of transition from one part of the garden to another;
• act as a connection between buildings;
• replace part of the wall on the veranda;
• create shady alleys.

Materials for manufacturing are selected according to the photo, depending on the design and design features of the design. The most popular are supports and trellises made of metal and wood; stone buildings are very rare.

Forged pergolas framed by stone and entwined with branches of climbing roses or clematis look original. Such a building beckons with its shadow and brings calm in any weather.

Wooden supports are used in rectilinear structures. When alleys are made for tall climbing plants, gazebos and various decorative fences, a thin rail and varnished timber are used.

But the most popular is the metal pergola. Its peculiarity lies in flexibility, in the possibility of giving any shape, in the simplicity of the metal structure. All this allows you to make various trellises on your own.

Pergolas as a support for climbing roses (video)

Do-it-yourself openwork support

In order to build a good metal structure for climbing roses, you need to decide on the location, shape and material. The metal pergola looks the most interesting and is distinguished by its durability. It can be made from fittings and pipes of various diameters.

When choosing a form, it must be taken into account that the width of the building must be greater than the height. Narrow and high pergolas are unstable. The most stable is a square or wide arch. The flexibility of the pipes makes it possible to carry out stems of various configurations. You can weld curved rods in the form of any animal or ball, comfortably attaching it to the lawn.

For the manufacture of the base are used round or square profile pipes, cut and interconnected by welding. In between, you can put wire or rods of various diameters.

A do-it-yourself pergola made of metal can be stationary and portable. In the first option, a foundation is poured under the metal structure with the installation of pipes or fasteners for them, and the foundation is being prepared.

Apply stationary installation under arbors and canopies. Climbing roses and clematis are planted from the outside and weave along the bars between the pipes. When the plant does not completely cover the area of ​​​​support, it has a very attractive appearance.

In the second case, the base is welded so that the metal structure is rigid and does not deform when moved from place to place. Usually when moving and installing on new site several types of fasteners are used. The most reliable and simplest is reinforcement driven into the ground and the base of the metal structure tied or screwed to it.

The diversity in the implementation of elements of design ideas does not exclude the combined implementation of garden decoration. These include:

• metal - wood;
• metal - stone;
• wood is stone.

Fences and canopies look especially beautiful, made in a mixed style and braided with lovely roses and clematis.

DIY pergola (video)

Pergola in design

Currently, arches for climbing plants are gaining momentum. It has become popular to hold weddings and take photos with the likes of decorative elements. The beauty and singularity of the view favorably distinguish the pergola from all garden architecture.

Arched corridors of climbing plants, verandas and arbors braided with roses, hedges, houses, along the walls of which branches of blossoming clematis stretch, have come into fashion. landscape design every year becomes more and more popular.

Few people would think of assembling a foundation from snags and twigs for climbing plant. But having ended up with a wonderful gazebo without special costs, you can safely relax in the shade of clematis after labor day and send a photo depicting an unusual type of bungalow.

The trellises are part of the pergola but can be freestanding decorative panel. They are a simple lattice made of metal or wood.

Wooden trellises are the side parts located between the main columns of the pergolas. They are made of thin laths and therefore very fragile. Metal grids are more durable, which allows them to be used for heavier plants, giving them the most fantastic shapes.

Performing many functions and being an integral part of the landscape, the pergola requires constant care. Rain, temperature changes and other external influences adversely affect any surface. Therefore, it is necessary to periodically clean and coat pergolas, trellises and other surfaces with weatherproof coatings.

Every owner of a summer house or a private house wants to have a shaded cozy corner in his garden, and the pergola is the most optimal solution this issue. After all, it can be in the form of a gazebo and serve as a support for weaving flowers and grapes.

Supports for climbing roses are needed in order to give these plants nice shape. Bushes of some varieties of roses tend to spread along the ground with long vines. Using this feature, gardeners decided to use flowers to decorate walls, elements of arches or arbors. Creative people they can create entire compositions or original living statues from climbing roses and supports.

Climbing roses should be planted in a sunny and well-ventilated area.

The need to use supports

Using supports will help give your garden a unique and sophisticated look. Especially if you create them with your own hands, as you can choose the shape and design that suits you, harmoniously fitting the support into the landscape of the garden.

When choosing supports, you need to understand that they will hold quite heavy by the standards of plants. rose bush. It will especially become heavier during its rapid flowering. And you need to make sure that the distances between the support elements are not too small, because the climbing rose is quite a tough plant in terms of flexibility. She also cannot cling to the support on her own, she will need to be constantly corrected and tied up, otherwise the plant will simply crawl. The ideal distance is 50 cm. So how to make supports for climbing roses? Let's talk about this in more detail.

Types of supports for flowers

Supports for roses can be divided into two types: natural and artificial.

The first type includes such landscape objects as trees or stones. The second type is more diverse in its variations: you can change not only the shape of the support, but also the material from which it is made.

A durable support for a climbing rose can be steel wire. Its service life is about 15 years. The wire net will not only allow roses to grow in the direction you want, but also allow air to circulate freely inside the structure. The most beautiful thing is the ability to create any size and shape of the network. Of course, working with such material will take time and a little magic with pliers, but the result is worth it.

A less durable support will be a wooden grate. Although she has her own charm and charm, she will not serve her owner for more than 10 years. They like to use such a support as an addition to the gazebo or as a garden divider into several zones. It is quite simple to make it yourself from improvised pieces of wood and boards - you just need a little skill and diligence. It is better to process the tree before use, otherwise it will become unusable too quickly. Please note that wooden structure will not stand strong enough, so it will have to be attached to something heavier.

Arches have always been a very popular support. They visually divide the site into two parts and give it a luxurious look. In order for the arch to fit your site, you need to choose the material.

Metal arches serve their owner for a long time, but in order to make such a structure, you need to be able to use welding equipment.

In warm regions, you can find arches made of plastic pipes, but it’s worth mentioning right away that this is not recommended for Russia, since plastic does not withstand low temperatures.

A stone support for flowers is the dream of romantic young ladies. The scarlet roses against the gray arch are reminiscent of old tales of knights and princesses. This is a strong and durable construction, but it will only fit large areas. In small gardens, such an arch will look heavy.

Of course, you can buy a ready-made support for a rose. It doesn't have to be an arch. Tapestries or rectangular screens will look quite organic. The main thing is that the height of the structure is at least 1.8 m. The materials of the finished supports also vary from cheap plastic to expensive metal structures.

Making a wooden support

For the construction of a wooden support, you will need a number of materials. For the most part, it all depends on the size you want to achieve. The standard arch will be described.

Rice. 1. The beams of the future arch are connected using a half-tree fastener.

It will take 12 meters of a round wooden beam with a section of 100 mm and a beam of 70 mm, 9 meters long. Also prepare:

• wire;
• pliers;
• roulette;
• level;
• some cement mortar;
• brushes;
• slats 2.5 x 4 cm.

Of course, do not forget to be patient, work carefully.

First you need to treat the wood with anti-rot and fungus agents. The largest beam must be divided into 4 parts 3 meters long each. Each of the resulting segments must be marked: measure 1 meter (it will be in the ground), and divide the remaining 2 meters with a pencil into 4 equal parts. The second beam, the one with a cross section of 70 mm, needs to be divided into 18 segments of 50 cm in size. Now the process will be like assembling a designer. Three-meter segments must be connected with segments of half a meter so that two structures in the form of a staircase are obtained. It is necessary to connect the beams together using the “half-tree” fastening, as shown in Fig. 1.

In each gap of the "stairs" you need to nail two more beams crosswise so that the roses cling to them as they grow and evenly cover the arch. It remains to make the roof. It is attached in the same way as the main structure. You need to connect all the beams according to the marks that you made earlier. The desired result can be seen in Fig.2.

Rice. 2. Ready option arches for climbing roses.

At this stage of work, it is very important to do everything with pedantic accuracy and check all corners and beams with the level. Small flaws will cease to be visible as soon as the rose will braid the arch, but if the structure itself mows in one direction, then over time it will only become more noticeable.

After assembling the entire arch, it remains only to install the entire structure. To do this, we dig four holes 1 meter deep so that the bases of the arch stand exactly in them. In thickness, they should be slightly wider than the bases themselves. After the structure is installed, you need to fill the pits with a solution of cement, sand and water. The mixture will need to be allowed to harden well, so it is important to adjust the weather during which the installation will take place (rain and wind will have an almost detrimental effect on all work). Now you can plant climbing roses to it.

Not without proper care

In order for the rose to grow properly, it must be planted at a distance of 50 cm from the base of the wooden arch. Dig a hole and plant a bush so that the roots are directed away from the crayfish. As soon as young shoots appear, they will need to be tied to a support. This is done only with soft improvised means, for example, laces, soft rope, pieces of fabric torn into strips, or linen elastic are suitable. Never use wire, plastic clips or any other rigid material: this method of tying will prevent the plant from growing comfortably. Special materials can be purchased at garden stores, but most often they cost quite a bit. a large amount money.

The first year, the rose will need to be especially carefully trimmed. As usual, you will need to cut off the withered buds, but do not touch the leaves and young branches, as they will be used to weave the plant around the arch. Hybrid types of roses lend themselves well to weaving (for example, a hybrid between a rose and a wild rose). In order for roses to successfully endure the cold, they will need to be insulated for the winter (wrapped with burlap or hay). If this is not done, then the plant can be destroyed by frost.

A support for a climbing rose is a great solution for decorating both small plot and a large garden.

Climbing stems of roses look more exotic and original than those flowers that grow in ordinary flower beds. Roses usually curl on beautiful and durable supports. There are many types of supports. They are made, among other things, with their own hands from different materials, V various styles. We will tell you in the article how to make supports for climbing roses on your own, what materials you will need.

What is the support for?

Vertical support for climbing roses is decorative ornament your garden, it saves space and visually expands the area. Rose is able to create a special atmosphere in any place. The material for the support must be chosen, starting from the specific features of the site and solving the problem of its landscaping. ".

Curly roses are able to ennoble the facade of the house. They will grow over time, covering empty unsightly areas of the building. In your garden, everyone will surely find some aimlessly standing props, posts. They will serve as a great base for beautiful roses. With their help, you can create a frame for the window, which will be in harmony with the overall design or play in contrast.

In this case, it is necessary to take into account the color in which the frame and facade are painted so that the roses are clearly visible against their background. Climbing roses will finally help you create a blooming oasis in your garden. The support for them will be compact, easy to rearrange.

There are many options for supports for climbing roses, which one to choose depends on the preferences of the gardener and the free space in the flower garden.

What should be the support for roses

It is wrong to think that a climbing rose can simply be planted against a wall or a fence, and it will find a place for weaving by itself. There are a number of requirements that must be met when creating the basis for climbing roses:

• Durability and reliability. The support must be stable and well secured in order to bear the weight of the flowering branches. Any structures as supports must be securely dug into the ground or fixed to it with metal stakes. Enough heavy flowers can bend under their own weight, for example, plastic supports.
• Decorative. The support should have a picturesque look and harmoniously fit into the exterior of the site, especially if the plant does not completely wrap around it. ".
• Color matching. A bulky stand is not suitable for small roses, and a miniature one is not suitable for large and tall plants.
• Compactness. Support for roses should not take up much space on the site. When installing it, you need to take into account the length of the shoots to form a densely flowering beautiful bush.
• Thrift. In order not to spend money on ready-made supports, stands and arches, you can make them yourself.
• Support for climbing roses should be made from environmentally friendly materials. The rose is not capricious, but during the flowering period, not only the soil and water for irrigation, but also the material from which the support is made, should be environmentally friendly.
• It should be easy to manufacture and operate.

Types of supports for climbing roses

Tapestry mesh for lashes

You can make it yourself, and it will cost you quite cheaply. A chain-link with large cells will do. You can also stretch a rope net between two supports - it is suitable for exquisite varieties of roses. It is done like this:

• you need to determine a place for support,
• dig metal or wooden poles,
• cover them with paint or varnish,
• pull the net.

Tip #1 Steel wire mesh will last 10-15 years. It allows you to create various patterns of flowers. To fix it, staples, nails, small fasteners are used.

Tapestry can also be made from thin wooden planks. Prepare the frame of the beams, and fill the boards in the form of a grid between them. With the help of such a structure, a bush is created in the form of a screen, which can be used to divide the site into zones. With the help of a trellis, a climbing rose bush can be shaped like a fan.

Carved wooden poles will look good, between which branches of roses are beautifully intertwined. Their stems can be sent to certain side and as the bush grows, form a lush pink stand. If you are using a trellis against a wall, maintain a distance of 15-30 centimeters so as not to disturb the air circulation around the roses. Tapestry will serve you for at least 10 years.

Arches and pergolas in the flower garden

They have a number of significant advantages - they are invariably beautiful and decorative, functional and roomy. If you have chosen roses with flexible thin branches, then arches made of metal arcs can serve as a support for them. A pergola is a lattice roof on supporting pillars, designed just for weaving roses. It can serve as a summer garden gazebo.

Support for climbing roses in the form of an arch, which you can easily do with your own hands

Usually, pergola posts are metal, and the top can be made of wood, made by hand. The length and width of this design you choose at your discretion. Put up poles and build over them wooden grate- what could be easier. The arch of wooden supports is intended for strong flowers with long lashes: when they grow, they will reach the top of the structure.

The arches are miniature and have curved shapes. They are used for zoning the site, they decorate the entrance to the gazebo, they decorate garden paths. Very popular wooden arches for weaving roses, painted in White color. They give the garden a sense of comfort and cleanliness. Forged arches are also in great demand - they are installed in a garden decorated in a classic style.

Sometimes the arch is braided with several types of flowers - it looks very impressive, especially when they bloom and intertwine. At the same time, plants are planted at a distance of half a meter from the arch, so as not to oppress the rose. You can also build a whole arcade in the garden - a series of arches following one after another.

Cone supports and poles

They can also be made independently from metal or wooden rods and poles. If the pillar is single, it must be dug very well. Poles are generally very convenient for creating supports - they are compact and not very wide. Roses are often planted under the support of the pillars, which curl slowly. The supports are in the form of a cone, a cylinder, a column - and they are all suitable for a climbing rose.

Tip #2 If you want to build a cone-shaped support, install several wooden beams or rods and connect them at the top. Such a stand is suitable not only for roses, but also for other curly flowers.

1. It must be remembered: a climbing rose cannot curl on its own: it is directed and tied up, moreover, when tied up, the branches are directed to the side - this is how shoots growing upwards will form.
2. Wood, metal, plastic, stone are used as supports for roses. The choice must be made taking into account the design of the garden, varieties of roses, affordability.
3. The distance between the horizontal bars of the support must be at least 50 centimeters. If the bush is too branchy, you need to make additional horizontal beams.
4. Large rose flowers look good on spherical shapes, on large supports. For small roses, vertical stands are suitable. ".
5. Old wooden shed or a fence can also serve as a support for roses. Plant bushes should be planted at a distance of 50 centimeters from the structure and supplemented with retaining elements.
6. Supports should be painted and treated, otherwise they can become a source of infections.
7. The crossbars on the support and the grate should not be located too often.
8. Between the horizontal bars of the pillars, you need to maintain a step of up to 50 centimeters (if the rose curls strongly, support it with additional transverse logs).
9. If the rose is planted 50 centimeters from the fence, wait for it to grow to it and direct it along it.

Support in the form of a wall, you can purchase or make it yourself, from any suitable material, any size and shape - let your imagination run wild

You can choose any type of support for climbing roses. In addition, it is important to land them correctly and care for them. It is necessary to monitor their correct weaving, cut off excess shoots in time, feed them with fertilizers, and observe the irrigation regime.

How to make a support with your own hands

First of all, you need to choose a place for support. Climbing rose is a photophilous plant, it does not take root in wetlands, it does not tolerate excess moisture. Therefore, you need to choose a place on a small descent or, conversely, on a hill, where ground water located at a depth of two meters from the surface.

This place should be well lit, not in drafts and wind. At the same time, the flowers should be spacious. The material for the support must be reliable, capable of withstanding the scorching rays of the sun, and heavy rains, and frosts, as well as the impact of regular watering and fertilizing with fertilizers containing chemical substances and can damage the surface of the support.

In the flowering state, roses are quite heavy. Therefore, the support must support their weight. In addition, the plants must be well ventilated and have enough room to grow. Then you need to choose the type of support. It will depend on the type of rose (its size, leaf shape, growth rate). For small colors will suit compact design, correspondingly large for large roses.

If you decide to build an arch or pergola, you will need wire and reinforcement, as well as tools:

• a shovel for digging in poles or support posts;
• pliers, hammer, nails or wood screws, brackets, staples, other fasteners that will give the structure rigidity, stability and reliability;
• drill, screwdriver, saw;
• trellis panels to decorate the pergola;
• concrete or cement mortar to strengthen the racks;
• timber of several sizes: 70x70 millimeters for the main supports and 50x50 millimeters for the transverse beams.
• Bars for beams (100x100mm and 100x50mm), which will be attached to the sides.

Exact amount Supplies calculated when compiling your project:

1. Having shown maximum imagination, make a sketch of the structure. Remember that you will need to respect all proportions.
2. Decide on the width and height of the arch. Then measure the centimeters on the blanks. The arch must be strong, withstand the weight of the plant, wind and rain.
3. The base is carefully twisted with a wire. It can be decorated with various patterns. In the manufacture of the arch, you can use welding.
4. When the product is ready, it must be installed. To do this, dig two holes 50 centimeters deep and bury the ends of the arch in them. It would be good for strength to fill them with cement and cover them with rubble.
5. With the help of an arch, you can arrange a gazebo, a gate, create a whole terrace. It can be made from several bars of reinforcement. Main - correct installation jumpers so that the structure is quite rigid.

The arch can be made from the following materials:

The arch has certain advantages:

• with its help, you can disguise an ugly fence, an old barn, an unsightly wall;
• roses together with foliage will create a fertile shadow. Under them, you can install a bench and relax comfortably;
• roses will stand out among other plants and decorate the landscape.

A trellis can be built from metal, wood, wire, and even ropes. There are a lot of ideas for installing it, but you need to remember that the height of the trellis should be at least 1800 millimeters. In the place chosen for the support, dig in wooden or metal poles and stretch the net. To make the trellis fit into the design of the site, it can be painted in a suitable color. A trellis can only be made from wooden boards.

Answers to questions about using a rose support

Question number 1. What support can be used for a climbing rose and how to give it different shapes?

Supports of any shape are suitable for climbing roses, but the main thing is that they are not lower than 1.8 meters. They can be wooden or metal. In the form of tapestries, arches, rectangular mesh screens. They are often used in the garden as screens for zoning space. These supports may not stand on the foundation. There are collapsible metal supports, which are removed for the winter.

Question number 2. What types of supports should not be used for roses?

Climbing roses are not suitable for pyramid supports, obelisks, as they are designed for soft climbing plants. Since roses do not cling to anything (as, for example, clematis), they have to be fixed on their own from time to time, as the shoots grow, on a support with a special wire for tying plants.

Gradually a rose will thus form. For support, a grid with small cells and others is not required at all. small items- it is difficult to tie a plant to them, but it does not curl on its own. It is necessary to choose a grid with large sections - for the winter it will be easy to remove a rose from it.