• Repair
• Repair
• Interior Design
• About everything
• About plumbing

How to clean bathroom faucets. How to clean the faucet in the bathroom: step-by-step disassembly and cleaning of taps

How to clean the faucet in the bathroom or in the kitchen, because the water in our plumbing is sometimes such that it leaves much to be desired. This is hardness, and the content of iron and other chemical and mechanical impurities. All this affects the condition of our taps and faucets. They fade, become covered with bloom, take on an unsightly appearance. This cannot please our hostesses, and they take all measures to restore the original appearance. We will try to consider various ways mixer cleaning.

Let's choose the material first.

To start cleaning your faucet, in the bathroom or kitchen, you need to find out what material it is made of. Mostly on the market, sanitary products, faucets made of brass are presented. There are products made from other metals and alloys. They can be made of copper, bronze, stainless steel, and other chrome alloys. It would also be nice to clean up.

Some of our alloys are nickel plated. There are mixers covered with ceramics.
Nickel-plated products are not very practical, at the slightest blow, nickel is chipped. Nickel tarnishes with use and is difficult to restore to its original appearance. Copper and bronze faucets have a rich look and are quite practical to use.
Recently, ceramic and plastic products are often used.

Plastic ones have not yet found their proper application, although they are devoid of all the shortcomings that metal mixers have. They do not oxidize, do not become covered with various raids. They have their own big drawback. They are very fragile and break quickly.

Leading professors are working in this direction.
Ceramic structures have all the positive properties that metal and plastic mixers have. Their biggest drawback is high price. They are not available to the general consumer.

Methods for cleaning brass products

Brass is an alloy that, over time, begins to tarnish. It has such properties that it is quite easy to bring it back to its original form.
Let's consider some of them.

The first way, you need to take a clean soft napkin, moisten it with hot soapy water and gently wipe the entire mixer. Where you can't get it with a tissue, you can clean it with a toothbrush. Brass will shine with pristine brilliance.

The second way, tomato paste contains acid. It returns brass to its former luster. To do this, it is necessary to cover the entire mixer with a thin layer. tomato paste. Wait about thirty minutes, and then rinse well with water.

The third way, Lemon also contains acid. The lemon is cut in half, sprinkled with a small amount of salt, then the entire plane of the tap is wiped. After this procedure, the product becomes like new.

The fourth way, if your tap has almost lost its color, you need to prepare the following liquid solution. Salt, vinegar and flour are taken, the mixer is removed and disassembled into separate parts. All this is immersed in the prepared solution, aged for about an hour and washed well with water. The faucet will shine like new.

There is one more universal remedy, which saves brass from tarnishing, is linseed oil. You just need to, after a while, just apply it to the tap. This is what you do good prevention so that the faucet does not lose its shiny appearance.

Another tip when you're cleaning your brass faucet, don't use metal brushes and hard fabrics so as not to leave scratches.

Methods for cleaning copper devices

The installed faucet is constantly in contact with water. This is a hostile environment. Copper, on the other hand, gradually begins to fade, and if you do not pay attention to it for a long time, it becomes covered green coating. You can clean it up in the following ways.

1. - In boiling water, dish detergent is added, the tap is placed in this solution. Lasts half an hour. Washes well and rubs with a soft cloth;
2. -Prepare a solution of vinegar with salt, the mixer is boiled in this solution. Then, as in the first case, it rubs. Your design will shine with renewed vigor.

Methods for cleaning bronze mixers

Bronze products quickly take on a dull appearance. If you want to clean them, first assess how dirty they are. You can put them in order with various means that you can buy in the store. This is TRILON-B or GOI paste. In some cases, it is recommended to add gasoline to the GOI paste. There are several other tools that are widely used by the people.

Prepare the next mixture. Add chicory to the water and mix well. We place a bronze structure in this mixture, stand for some time and rinse well.

The item can be boiled in pea broth, the mixer will shine like new.

If it is very dirty, we prepare a solution of caustic sodium or potassium. We put the device in it and stand for about an hour. Rinse and rub well.

The bronze mixer gets a nice look.
If your faucet is dull, then use one of these remedies.

How often do you call a plumber?

Poll Options are limited because JavaScript is disabled in your browser.

Untimely removal of limescale from the tap threatens to clog it soon, and then break it. There are several ways to get rid of contaminants: by professional means and with the help of folk remedies.

Major cleaning should remove plaque from the tap, not only from the outside, but also from the inside. One is enough similar procedure in season to keep the plumbing working.

Necessary materials:

• Tight wire;
• 9% vinegar;
• Water;
• Domestic basin.

Depending on the material of the mixer, the detergent varies.

1. The spout, valves, mixer are removed with an adjustable wrench. If possible, disassemble all loose parts.
2. In 2 liters of warm water, 3 tablespoons of food vinegar are diluted - the solution is poured into a basin.
3. Removable elements are soaked in the substance for up to 60 minutes. Non-removable wipe with a sponge.
4. Softened growths on the outside are removed with a toothbrush or the hard side of a dish sponge.
5. To clean the blockages inside the spout, they put a wire in there and probe the places of possible accumulations of dirt in the bends, knees.
6. The cleaned parts are thoroughly washed in cold water, fixed in place, wiped dry, then polished with a soft cloth.

Cleaning products

Despite the variety of cleaning products, folk methods Faucet cleanings are still popular, but professional ones are speeding up the process.

Professional

Specialized household chemicals can both quickly wash any faucet in the bathroom and ruin it. Black spots, streaks, darkening are the result of using the wrong product.

Manufacturers of cleaners are advised to pay attention to:

• Faucet material, its coating - soap compositions suitable for one surface easily damage others;
• Detergent purpose. Rust cleaners in the bathroom react with active chromium, which coats the surface of the faucet parts, destroying it;
• Ingredients on the label. The most harmful substances for taps: chlorine, phosphoric acid, sulfuric acid, hydrochloric acid;
• detergent consistency. Soft cleansing is guaranteed by sprays, gels, creams - powders can scratch the polished surface.

Working with household chemicals involves protecting your hands with rubber gloves. The active substances in detergents easily corrode the skin of the hands.

• Cif Cream- copes well with plaque, removes stubborn stains. Creamy consistency;
• Ravak- a gel that prevents the appearance of a water stone;
• Cilit Bang- a suspension that gently removes rust, limescale;
• Domax- a cleaner that is suitable for metal, glass and ceramic surfaces;
• Sanita- creamy product that gently removes plaque, does not leave streaks behind.

Folk

The active components of detergents - acids and alkalis - are always at hand for experienced housewives. Improvised substances help clean plumbing, no matter what materials it is made of.

• Enamelled faucet lends itself to baking soda. Dip a damp sponge or rag into the powder, cover the surface abundantly, leave for half an hour, and then the toothbrush will easily remove the remaining dirt;
• Chrome faucet wipe with half a juicy lemon;
• Plastic does not react to harsh agents, so you can remove plaque from it with a solution of 9% vinegar, citric acid and water;
• Ceramic faucets Coca-Cola will save - it not only softens salt deposits, but also removes an unpleasant odor;
• soap solution suitable for cleaning any surface, if the dirt has not had time to eat. Liquid soap or household (pre-grind on a grater) is dissolved in warm water- Wipe the surface with the resulting solution, then rinse clean.

Despite the lower activity of chemical components in the composition of improvised means, the taps after them must also be thoroughly rinsed. clean water.

Causes of plaque

The problem of lime deposits lies in the quality of tap water. From the faucet flows a liquid full of calcium and magnesium, which are the main components of lime. Splashes on the mixer dry out over time, leaving a “dusty” coating, ready to gradually turn into lime deposits. And broken faucets that are constantly leaking speed up the process of plaque.

Cleaning the faucet from dirt from the outside is not enough - plaque accumulates inside. If salt growths are not detected in time, the faucet will become clogged.

Prevent plaque buildup

Metal faucets, especially chrome ones, should be wiped daily with a dry soft cloth. If after each use the spout and valves are cleaned of splashes, the shine will last much longer.

To prolong the effect of washing, the taps are rubbed with a special polishing wax. It can be replaced with improvised means:

• Cosmetic oil for the face;
• Facial care sponge.

After a thorough cleaning, the plumbing is rubbed with oil to a glossy shine. The oil creates an invisible film on the metal surface, which repels liquids, preventing the accumulation of dirt. The main thing is not to overdo it with cosmetic, otherwise, instead of polishing, you will get repeated soaping of parts.

Cleaning will be even more effective if carried out regularly and correctly:

• Hard metal sponges scratch the mirror chrome surface - only soft foam bars with a hard fabric side or toothbrushes are suitable for it.
• The optimal soaking time in cleaning products is no more than an hour.
• The finished look of a clean product will be given by wiping the remaining moisture and polishing with a soft cloth - you can use special polishes or rub the metal “dry”.

Wash parts in distilled water, free of impurities or sediment. If it is not possible to get distilled, clean running cold water will do - hot accelerates the formation of scale.

Cleaning faucets from limescale is not so difficult if you know how to choose the right detergent depending on the material from which they are made. Timely competent cleaning will help to preserve the beauty of plumbing from the outside and performance from the inside for a long time.

IN tap water contains minerals, from them depends on its hardness And will become mixers during operation.

impurities settle on pipes and taps, limescale is formed. Faucet care includes not only daily wiping from moisture, but also regular cleaning from mineral deposits inside and outside.

Folk remedies

per century household chemicals many forgot about cleaning folk remedies or did not know that there are safer options for how to get rid of plaque so that the surfaces in the bathroom shine not only from the outside, but also from the inside.

You can remove white mineral deposits at home without the use of professional tools.

How to clean plumbing?

To remove plaque, soda, vinegar, household and citric acid are used. These are the safestdo not create toxic fumes.

Soda

Soda is sold in packs from several manufacturers. You can buy any. Worth the remedy pennies but cleans up great.

How to clean a limescale faucet:

1. Put in a bowl 2-3 tbsp. l. soda, add water, mix well. The consistency should be mushy. If necessary, add more soda or water, the amount does not matter. The main thing is to s enough for processing.
2. Cleaner apply on all surfaceswith mineral deposits. Compound also used for sinks and bathtubs. They can process the entire shower room if a soapy coating has formed.
3. Leave gruel on surfaces for 1 hour.
4. During this time, the baking soda will soften the limescale and make it easier to remove. Take soft cloth, wipe all the places where the gruel was applied. Be careful, don't try hard. Remember that not all grains have dissolved, may scratch the surface.

clean up faucet is not problematic. If after processing there are still pieces of greenish or white plaque, take the same gruel and rub right places toothbrush.

Clean the limescale inside and outside taps can table and apple cider vinegar. Use the second tool, according to reviews, it is more effective.

How to clean a faucet with vinegar, effective ways:

1. Mix vinegar with water in a 1:1 ratio. Decide on the amount of the product yourself, it depends on the degree of contamination and the amount of work. Take a soft sponge, moisten in the prepared composition and process problem areas. Rinse with clean water and dry.
2. The shower head can also be cleaned with a vinegar solution. If there is a lot of mineral deposits, cleaning will take longer and you will need to disassemble it. If there is no need for disassembly, use this technique: pour apple cider vinegar, diluted or concentrated in a tight bag, put it on the shower head, secure it with an elastic band or tie it with something and leave it for several hours (you can overnight). In the morning, all that remains is to remove the bag, clean from lime with a brush, then wash with water.
3. If you need to wash the shower head from the inside, you will have to disassemble it. Put all the details in one container. Pour them with a solution of vinegar and leave for 2 hours. You can soak for 3-4 hours, but longer is not recommended. IN watering cans there are rubber parts that wear out over time, vinegar will speed up this process if soaked for a long time . Then take a toothbrush, remove the remnants of lime deposits, rinse the watering can in clean water.

Perfectly clean mixer from limescale. It copes even with persistent traces and old mineral deposits.

Laundry soap

In order to remove limescale from the tap, laundry soap is used. For this method, you need to purchase a product marked 72%.

How to remove limescale from a faucet:

1. Laundry soap rub on a fine grater to make it better dissolved in water.
2. Add warm water and stir until the mixture is the consistency of low-fat sour cream.
3. Pour into this solution a little food or soda ash.
4. Faucets in bathroom and kitchen process prepared composition. Can be used for chrome plating.
5. Leave the mixture for 1 hour.
6. Rinse faucets with water, dry.

Laundry soap, no doubt, a good tool. Not will help with strong mineral deposits.

Laundry soap helps on the faucet and on the faucet if it's fresh.

Lemon acid

Cleaning with lemon is no less effective. It can be replaced with the juice of one citrus.

How to remove limescale - methods:

1. citric acid breed with water in equal quantities. To clean kitchens, 2 tsp is enough. powder. In the prepared solution moisten a cloth, process the desired areas. Leave the acidYou don't need to rinse right away. After a couple of hours, rinse the faucets with clean water.
2. The second way is to use lemon. Here they use juice and a piece of citrus. Slice lower in finely ground salt and rub problem areas.Salt acts as an abrasive. Faucets should be cleaned carefully. Don't put too much pressure on them. Rinse the cleaned faucet with water, wipe dry.

Citric acid can be used to clean watering cans. You will need to prepare a solution of 2 tsp. diluted in two glasses of water. In this compositionlower the disassembled or assembled watering can.

Finish the details with a toothbrush. Each separately . It needs to be cleaned from all sides.

Coca Cola

This drink is saturated with phosphoric acid, she deletes the most persistent deposits.

How to remove limescale?

You can soak the watering can and treat the taps with this composition. Wash off after a few hours.

Suitable compresses. The fabric is wetted with a drink, wraps around problem areas. It is left overnight if there are a lot of deposits or for a couple of hours if cleaning regular .

Then you need to clean the faucets with a toothbrush.To avoid rust, rinse the cola with water, dry the surface.

Household cleaners

Faster and more efficient way to clean the mixer from limescale household chemicals. Lime stone will come off faster.

Industrial cleaners can irritate your hands, so wear gloves.

There are many on the marketprofessional chemistry intended For removal of mineral deposits from taps, faucets, sinks and even stoves.

The best of them:

1. Top House for Stainless Steel– An indispensable tool if you properly care for mixers. This composition not only perfectly cleanses, but also protects against appearance of dirt . Apply the product with several sprays and leave to work a little if the plaque is strong. Wash off with water, wipe surfaces dry.
2. Pufas Glutoclean removes lime and nitrate deposits quickly and without problems. The liquid is recommended to be used only for surfaces that are resistant to acids. This strong composition can damage a faucet made of poor quality material.
3. Selena Shine of Steel - means designed for metal products. Removes not only mineral deposits, but fat. Do you want to keep your plumbing always shiny? Means, choose this composition.
4. Ravak Cleaner Chrome is a Czech-made product. It has performed well. Cleans faucets, acrylic bathtubs, stained-glass windows of shower cabins. The manufacturer indicates that the product is safe.Should be kept away from children.
5. SVOD-Effect cares for chrome surfaces. If you want to achieve a pristine shine, remove lime and soap deposits, use this professional composition. COND-Effect gently cleanses the most persistent pollution, does not scratch, creates a film that will add shine and protect against the rapid formation of mineral deposits.
6. Cif is just a godsend for housewives. It is applied to surfaces with a sprayer or sponge.Leaves on the surface for 10-15 minutes. Sif will get rid of stubborn plaque that other chemicals could not clean.
7. Sanoks will save any surface from limescale. This unique cleaning formula quickly removes any mineral deposits. Sanoks is the cheapest composition, among all household chemicals from plaque, but no less effective.

Having completed the cleaning of lime deposits, use special polishes. They are used at the final stage.

polishes

Give plumbing shine. Some compounds create an invisible film, due to which limescale is not collected so quickly.

Known polishes:

1. Domax, Shake well before use. Then spray the liquid onto the cleaned surfaces, spread with a rag. The agent is washed off with water, and the plumbing is rubbed to a shine. After applying Domax, a film is created that does not allow even fingerprints to appear on taps.
2. Indesit takes care of steel products. A creamy agent is applied to the surface with a sponge, after a while it is washed off with water (there is a composition that does not need to be washed off). This substance not only makes plumbing shiny, it cleans.

Polishes do not remove limescale well. They are needed to give plumbing a shine.

Prevent lime deposits from appearing so that you don’t have to search later, how to deal with this problem. Try to prevent the occurrence of plaque. Wipe everything dry, clean regularly and this problem will not affect you.

Every housewife wants the taps in the kitchen and bathroom to shine. But tap water contains a lot of minerals, which causes white streaks and limescale on the outside and inside of faucets.

To prevent the appearance of soap stains and limescale, it is important not to forget to wipe the mixer dry with a soft cloth after each use. However, due to the hardness of the water, it is unlikely that they will be completely prevented. So let's take a look at a few effective methods how to clean the faucet and remove limescale.

Everything is simple here, buy special agent for cleaning chrome products and follow the instructions. It is only important to observe a few simple rules:

• Means that are intended for cleaning plumbing (sinks, toilets, etc.), rust removal, any bleaches are categorically not suitable for this purpose. They can disrupt the thin chrome layer covering your faucet and cause permanent dark spots which will then be difficult to remove.
• You can't mix different chemicals. There is a great risk that their interaction will result in the release of hazardous harmful substances.
• It is best to use liquid and foam different means, because powder with its abrasive particles, damages the surface, forming micro-scratches.
• When using household chemicals, do not forget to wear gloves to avoid chemical burns and allergies.

home remedies

Not many people know that limescale from a tap can be cleaned no less effectively and without the use of special household chemicals. And using homemade simple recipes.

Table 9% or apple cider vinegar must be diluted 50/50 with water. With a soft cloth or sponge moistened with the resulting solution, carefully treat the surfaces damaged by plaque, rinse with water and wipe dry with a napkin.

For especially polluted places, it is recommended to apply an acetic compress. Heat the vinegar, soak a cloth in it, and wrap the faucet around it. Leave for an hour or an hour and a half, then rinse with water and wipe with a dry cloth. Also, removable parts, for example, a shower head in the bathroom, can be unscrewed and lowered into a solution of vinegar. Leave for 1-2 hours, depending on the degree of contamination, clean, then rinse thoroughly with water. Vinegar will do an excellent job with traces of even persistent, old plaque and will also help clean other surfaces damaged by plaque in the bathroom.

Citric acid and soda

give initial shine your mixer will help a solution of citric acid, or plain baking soda. We dip a damp sponge in soda or in a solution of citric acid and clean the surface of the tap and mixer. We complete the procedure by thoroughly rinsing the treated areas with water and wiping with a dry cloth. Hard to reach places can be cleaned with a regular toothpick.

Coca Cola

Removing limescale from a faucet can help, don't be surprised, even Coca-Cola. After all, the composition of the drink beloved by many, in addition to caffeine and sugar, includes acids that will help us cope with an old plaque. According to the principle of working with vinegar and citric acid, we use cola compresses and rub the surfaces of the mixer and taps with it. Many housewives should take note of this method, because this “magic drink” can not only remove dirt, but also clean your faucet inside, and even eliminate blockages. Coke is just as easy to handle bad smell without emitting any harmful fumes.

Glittering faucets are in every kitchen and every bathroom. These are absolutely necessary technical devices in the economy. In addition, stylish faucets in classic or modern design have long been an interior decoration.

Suddenly, the faucet begins to hiss and snort, and the jet loses pressure. The reason for this may be deposits of calcium contained in tap water. To eliminate the breakdown, the mechanism must be thoroughly cleaned and defective parts replaced.

Conventional faucets are equipped with two separate valves for cold and hot water. Recently, they are gradually being replaced by single-lever designs. Which of the models is preferable in terms of design and technical device, everyone chooses for himself.

Double valve

In such a mixer, the force of the water flow is controlled by the so-called crane boxes. There are two of them: separately for cold and hot water. One of three types is usually used:

• worm;
• lamellar;
• ball.

When we turn the valve, the locking mechanisms open the way for the corresponding flow. After passing through the faucet box, the water is mixed in the spout.

single lever

A special cartridge is built into the body of such a mixer, which contains two ceramic plates ground to each other. When the handle-lever is turned, the plates are displaced relative to each other. This expands or closes the holes through which water passes.

There is also a model where the plates are replaced by a hollow ball with holes. Hot and cold streams enter, mixing, into this chamber and through the outlet enter the tap spout. The control lever moves the ball, thus regulating the pressure and temperature of the water.

ball

For installation in the bathroom, the faucets can be equipped with a ball switch. It allows you to redirect the flow of water between the shower and the gander, i.e., the spout of the tap. Structurally, this device is close to the ceramic crane box. Adjustment is made by rotating a small lever.

This mechanism is extremely reliable and less prone to breakage, unlike another popular variety - a push-button shower switch.

How to disassemble the mixer into parts

Limescale does more than just stain chrome surfaces. It accumulates between the elements of the mixer and interferes with their normal operation. Therefore, to clean the internal areas, you have to remove the crane and disassemble it into parts.

In the bathroom

Bathrooms often have twin-valve faucets because they require more precise temperature control. To remove such a mixer, the first step is to shut off the supply to the pipes of both hot and cold water.

The further course of action is as follows:

• disconnect mixer from water pipes by unscrewing the nuts holding it;
• remove the red and blue plugs on the faucet handles and unscrew the screws under them;
• unscrew both faucets from the mixer using an adjustable wrench;
• disconnect the faucet spout with aerator.

If the device uses rubber or plastic gaskets, it is recommended to update them.

There is no point in repairing the crane-boxes with ceramic elements themselves, it is easier to buy new ones to replace them. It will be inexpensive. We clean all the parts with a detergent from rust and lime and assemble the structure in the reverse order.

In the shower

A diverter shower faucet is similar in design to a faucet with only two valves. Having disconnected the mixer from the water supply network, the faucets for cold and hot water are unscrewed from it, then the shower / gander switch is removed. To do this, also remove the plug and, by unscrewing the screw, remove the lever. After cleaning the parts, they are reassembled into a single structure.

IN this case attention must be paid to the safety of the shower hose. It is easy to damage it with a metal tool, so it is better to disconnect the hose manually.

If this fails, the nuts must be wrapped with a cloth so as not to be scratched. The shower head is removed and placed in a solution of vinegar for several hours to clean the water holes. Especially heavily clogged holes are pierced with a toothpick.

In the kitchen

Many people prefer to install a single-lever faucet in the kitchen. In the process of cooking, it is convenient to regulate the water with one hand. To clean such a mixer, you need:

• remove the plug located under the lever and unscrew the screw;
• pull the lever handle up and remove it from the cartridge stem;
• remove the cap that closes the mechanism from above and unscrew the clamping nut;
• remove the cartridge from the faucet body.

How to clean a faucet from rust, scale and other contaminants

In order to clean the mixer from rust, scale and other contaminants, you can use a variety of chemicals. It is not recommended to use compounds containing aggressive acids and chlorine. You also need to be careful with abrasive powders so as not to damage the chrome surface.

Cleaning products

On sale you can find a variety of compounds that will effectively help in the fight against pollution. The most famous of them is Silit.

Please note that ordinary bath and toilet gels, as well as bleaches, are not suitable for cleaning faucets from the inside.

The most popular home remedies are:

• laundry soap;
• lemon acid;
• baking soda.

Do not mix different products, as you can accidentally get a caustic composition that will damage the metal. Before cleaning, put on rubber gloves to protect your hands from harmful effects.

How to clean a faucet

In the presence of light plaque, you can simply rinse the device with an appropriate agent. If deposits have penetrated deeply, you will have to remove and disassemble the entire mixer. Rough dirt and rust internal parts can be cleaned with a steel wool.

When cleaning external chrome surfaces, abrasive powders should be avoided.

If it is not possible to disassemble the mixer, then it can be soaked in detergent for several hours, in the hope that the build-up of lime inside the device will dissolve or become brittle and fall off on their own. But you don't have to leave hardware in solution for too long.

Limescale removal

Lime deposits are formed due to the high content of calcium in the water. Hard water enters the water supply network quite often. White spots and streaks can be easily removed from the surface of the mixer using laundry soap or soda. In the presence of persistent contamination, they can be covered for a while with a cloth soaked in vinegar or a solution of citric acid, then rinse the part with clean water. For the treatment of internal surfaces, it is better to use special tools.

Rust removal

If there is a significant amount of rust, it must first be cleaned with a wire brush or sandpaper. The remaining traces, as well as slightly affected areas, are treated with the usual means: vinegar, soda, lemon juice.

You can try to wipe off the rust with a rag soaked in machine oil or kerosene. Car owners use an auto cleaner for this purpose, or you can buy a special one in the store household remedy against rust.

How to clean the aerator filter

The cause of a weak uneven jet from the tap may be a clogged aerator filter. It is often clogged with small debris contained in the water. In addition, the fine mesh is also susceptible to salt deposits and rust. The aerator is carefully unscrewed and immersed in a solution of vinegar. Then it is rinsed and set in place.

If the filter is so "grown" to the tap that it is impossible to remove it, the cleaning solution is poured into the bag. This package is hung on a crane, immersing the part of the device to be cleaned into it.

In the video, the author tells what components of the mixer need to be checked in order to improve the water supply.

Preventive actions

Even with increased water hardness, contamination of the mixer will not be a problem if the plumbing equipment is properly maintained. For example, you can apply the following methods:

• install water softener filters;
• install coarse and fine mechanical filters;
• Use suitable cleaning agents;
• remove lime deposits while they are fresh;
• coat external surfaces with a special shampoo that forms a film that protects against dirt.

Then maintaining the good condition of the equipment will not be a hassle.

Using the methods described, any skilled owner will be able to clean the mixer. For this you need a screwdriver wrench and a special agent for removing rust and lime deposits. The main thing is not to forget to block shut-off valves hot and cold water before starting work. All these efforts will not go in vain. A smooth, powerful jet from the tap will help you quickly and easily complete all household chores.