• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Natural stone in the hall. Wild stone in the interior of the apartment. Walls decorated with stone in the interior of the living room

Wall decoration with decorative stone is one and best options room decorations. Thanks to this material, a mysterious, but at the same time cozy atmosphere will appear in the interior.

Natural ingredients can add a touch of warmth to any living space.

Finishing internal walls under the stone, is considered quite popular design solution. Laying such material requires professional experience.

To decorate the interior, artificial stones are used that accurately imitate natural rocks.

Upon visual inspection, all the faces and ledges of the rock are present here. This material has minimum weight unlike real stones. In our material, options are presented the best finish walls under the stone photo.

Decorative stone in the interior space

Decorative stone wall decoration needs good lighting. Here you can apply several options for light. Mainly:

• point;
• scattered.

In intense light, the edges and lines of the stone are able to create refined interior. In case of insufficient illumination, you can get a rather gloomy and heavy atmosphere in the room.

To complement the design, a variety of houseplants. Special attention it is recommended to give curly varieties. Their long lashes will repeat all the curves of the decorative wall.

Wall decoration with stone and wallpaper emphasizes the luxurious environment. The alternation of wallpaper and stone elements can add a little lightness to the interior space.

Combination white shade wallpaper and dark stone, allow you to visually expand the room. In most cases, such combinations are carried out in the corners and to highlight door arches. Decorative trim with artificial stone will add an accent group to the space, which will attract admiring glances.

It is recommended to use artificial brick in spacious rooms. small size the rooms are not suitable for this kind of decor. Basically it is a corridor and a kitchen. The lack of free space with the presence of stone elements creates a rather heavy design.

A budget option is considered to be wall decoration with stone panels. Thanks to this building material, significantly reduced installation work for laying decorative elements.

Wall surface preparation and laying process

The initial stage will be the process of plastering the walls. A fine mesh is used as a reinforced reinforcement.

It helps the decorative stone stay on the wall surface. Depending on the size of the artificial stone elements, the size of the mesh reinforcement increases.

After the plastered surface has completely dried, they proceed directly to the process of laying each element. As a basis, a special adhesive solution is used.

The consistency is similar to ordinary tile adhesive. It is recommended to apply it with a notched trowel. During application, it removes excess adhesive mass.

Next, each element is tightly pressed against the wall. To fix it with the surface, you need to hold it for about 5 minutes. If you do not do this, then in the morning you can observe the presence of a decorative stone on the flooring.

Between each new row, a thin strip of drywall is laid. It serves as a perfectly even seam. To prevent slipping of the tiled segments, special clamps in the form of plastic crosses are used. The photo of wall decoration with stone captures all the subtleties of the workflow.

In each design, the location of the stone is taken into account based on the desire of the client. You can calculate the required number of elements in a hardware store. Presented here big choice shapes and sizes of decorative objects.

Photo of wall decoration with stone

Since ancient times, stone has been used by man for the construction of all kinds of buildings, ranging from ordinary residential houses to luxurious royal palaces. This material was present in abundance, and then, probably, few would have thought that after several thousand years natural stone only wealthy citizens can afford. But if in ancient times people simply did not have an alternative to this material, then modern technologies we were given such an alternative, given in the form of an artificial stone. Is it as good as its natural counterpart, or is it still inferior to it? Is it worth paying attention to this material at all, because in fact it is nothing more than a fake? Let's try to figure it out.

What is an artificial stone and what is it eaten with?

First of all, it should be noted that there are as many as 3 types of artificial stone. These are porcelain stoneware, agglomerate and concrete-based stone. Most often, in apartments, interior decoration is carried out with artificial stone on a concrete basis, since this type of material is distinguished by the widest decorative possibilities and relatively in a simple way production.

In short, then fake diamond obtained by pressing under the influence of high temperature of the working mixture, consisting mainly of composite materials, mineral additives and acrylic compounds. Moreover, the proportion of mineral filler is at least 70%. Dyes are responsible for the external color and texture. In general, there are practically no restrictions on appearance there is no stone, thanks to which it can successfully imitate a wide variety of natural materials.

As you can see, the texture of two individual stones can differ significantly from each other, for which, in fact, this material is ardently loved by designers around the world.

Concerning performance characteristics material, the most pronounced are the following qualities:

• Strength. The stone is able to withstand the strongest mechanical shocks;
• Durability. Service life is measured in decades;
• Environmental friendliness. There are no toxic compounds in the composition of the stone;
• Fire resistance. This finishing material is completely non-flammable.

As you can see, interior decoration with artificial stone allows not only to embellish the room, but also to make it much more technological and functional. Now, having dealt with the physical and mechanical properties of the material, let's take a closer look at its decorative component.

Artificial stone in the interior of the apartment - we bring fantasies to life

Those design possibilities that artificial stone gives, probably, no other finishing material will be able to give. Its versatility is amazing. With the same success, stone can be brought into the interior of any room, any without any exceptions. It can be a living room, bedroom, kitchen, bathroom, toilet, etc. In addition, artificial stone does not necessarily fit on walls or floors - all kinds of countertops, sinks and sinks are quite successfully made from it. Take a look at how artificial stone looks in the interior various premises on the picture:

As a rule, artificial stone is used to create a sophisticated atmosphere, to give the interior a touch of wealth, aristocracy. In this case, the stone is laid out on the walls, and in large quantities. At the same time, rectilinear forms and familiar figures with their inherent rigor and steadfastness prevail:

But this material can also have the opposite effect. Yes, at certain conditions artificial stone will bring something wild, unbridled into the interior. Here, the masonry already has more chaotic forms. The use of green plants is encouraged:

Decorative artificial stone in the interior of the house can be laid out different ways, in various quantities and various places. The frames are almost non-existent. And yet there are some basic techniques that have been successfully used by thousands of designers around the world for decades. Let's take a look at them in more detail.

Interior decoration with artificial stone

After laying the stone directly on the walls, edging doorways with it is perhaps the most common, but no less interesting option material application. In this case, the stone can cover the entire corner of the doorway as a whole, and also be located on adjacent corners of the room:

Niches and shelves are welcome in the interior of the apartment

Niches lined with artificial stone, with shelves located inside them, or separately hanging shelves against the background stone wall will become great solution for decorating a bedroom, hallway or living room. Well-lit, such interior details can become a place to store items of your pride, for example, some awards, diplomas or certificates. Otherwise, here you can place ordinary souvenirs, flowers, or, at worst, a collection of movie discs:

Artificial stone fireplace

If you use artificial stone in the interior of the living room, then you simply have to decorate the fireplace with it. Of course, if there is one. It is very difficult to come up with a more profitable combination than a fireplace and stone. The material is laid out either around the portal itself, or on the entire wall:

In the absence of a fireplace, the focus is on the TV. The stone is laid out either in a similar way so that the TV screen is against its background, or on a bare wall surrounded by a kind of stone frame:

Decorative stone in the interior of the bedroom

Using decorative artificial stone in the interior of the bedroom, you should be especially careful. Here it is necessary to maintain an optimal color balance, and it is desirable that it be dominated by light colors and shades. Psychologists have long confirmed that color has a huge impact on a person’s mental state, and if this fact is important somewhere, it’s definitely in the bedroom. Give preference to colors such as white, beige, light blue, gray, etc. Soft brown and even black are allowed, but only in small quantities - as accents. It is good if furniture plays the role of accents. As for where to use the stone in the bedroom, it will look especially good on the wall behind the bed. You can also hang one or more pictures here.

Stone is the first construction material from which they built strong and warm housing. A little later, the stone went to the construction of other structures, including strong and tall ones.

After all, the stone was always in abundance, and there was no alternative at that time. But now only people with means can build a house from natural stone.

Those who do not have the opportunity to afford a house made of natural stone can buy building materials such as artificial stone, which scientists have recently developed.

It goes more for decorative finishes, but in general, a house with it will look like a structure made of natural stone.

Decorative stone in the interior and its characteristics

This building material is easy to use and relatively cheap, so it has become a priority finishing material.

Facing from it will serve for a long time, it does not break and is not covered with cracks, because the artificial stone has a unique wear resistance.

But it is worth remembering that the operational life of such material depends on the correct installation. And its surface, during the production process, is treated with water-repellent substances, so dirt and dust are easily removed from such a material.

Decorative stone in the interior can be laid on any surface, but before laying natural stone, the surface must be reinforced.

Diversity color options will also pleasantly surprise buyers, because manufacturers offer a wide range of shades, which means that artificial stone can be matched to any style decision.

A large selection of textures is also pleasantly amazing. Artificial stone in the interior can imitate brick and natural stones. There are also very extraordinary proposals - a material that imitates the seabed.

By collecting, for example, a panel, you can get a surface with corals and shells, or one that will resemble desert lunar landscapes. To verify this, you can get acquainted with the photo of decorative stone in the interior of apartments and houses. White stone will also look beautiful in the interior, for example, of private clinics.

The phrase "artificially created", regarding the stone, should not be alarming, because it is created from environmentally friendly components. These are cement and fillers: pumice, perlite, expanded clay, plus dyes.

Advantages

Facing stone in the interior is a finish that can last 15 years or more if properly cared for.

The weight of artificially created stone is 3 times less than natural. Therefore, it is easier to transport and work with it.

To make the lining with such a material, it is enough to use glue-cement.

It is a refractory material, it does not burn and prevents the spread of fire.

How is stone used in the interior of an apartment?

This material can radically change the interior. It is mostly used for exterior finish. Thanks to him, you can beautifully decorate the facade, gazebo, fence, openings between windows and so on.

Stone decoration in the interior of the premises is used to decorate the foyer of hotels, restaurants, shopping centers, hallways in houses and apartments, etc. In addition, light and beautiful material you can finish, for example, a closet in the hallway, shoe rack, rack.

Artificial stone is also appropriate in the kitchen: these are countertops and facades kitchen wall and the walls themselves. Artificial stone is perfect for the bathroom, but you should choose moisture-resistant options.

They can decorate a washbasin, bathtub or shower tray, and in addition, it can be placed on the floor or used as ceiling covering using flexible stone in the interior.

In the living room, with such a stone, you can decorate the portal of the fireplace, a small table, a rack, a cabinet, you can make it out of it. bookshelf, floor vase or other interior items made of stone.

But, and in the bedroom you can put lamps made of artificial stone. It is the Illumination collection that is transparent enough for this.

And in conclusion

Due to the fact that artificial stone is a beautiful, wear-resistant material, easy to maintain, reliable and inexpensive, it perfectly copes with the role of a finishing material.

Even its use in a small amount gives the room a unique chic, and you get a finish from high-quality building materials.

Photo of decorative stone in the interior

The interior of the hallway should be given no less attention than the rest of the premises, because this is the first thing that guests see. Very stylish look gives an artificial stone, which is used as the main material or as an additional accent. Create original design you can do it yourself, since decorating the hallway with decorative stone has a fairly simple technology.

Types of coverage

Before starting work, it is necessary to choose the right finishing material. made on the basis of concrete and gypsum with the addition of dyes. Both types have their own advantages and disadvantages, so it is better to study their characteristics first.

The advantages of concrete products include:

Walls finished with such a stone can be easily cleaned of any dirt, and a worn surface can be quickly restored with paint. If you accidentally touch the finish with something hard, it will not leave marks and cracks will not appear.

Flaws:

• big weight;
• high price;
• the complexity of processing.

In order to cut individual fragments when laying, you will need a grinder and a diamond wheel, as well as certain efforts.

Advantages of gypsum coating:

This stone is chosen for decoration drywall walls that cannot be subjected to heavy loads. If you can’t find the right color, there are unpainted products on sale that you can paint at your discretion.

Flaws:

When dirty, such a finish should not be wetted and rubbed hard so as not to damage the surface. Treating the stone with special impregnation or varnish on the stone will help to avoid such damage. acrylic base. Also on sale is gypsum stone With polymer coated- it is a little more expensive than usual, but it is not at all afraid of moisture.

If desired, you can do it yourself: for this you need a plastic or Silicone molds, dry gypsum mixture, coloring pigments. Buying all this is not a problem, every hardware store has a large selection of mixtures and shapes. Self-manufacturing finishing material takes more time, but it saves money on repairs.

Facing stone prices

Facing stone

Finishing preparation

First you need to calculate the amount of material. If the stone will cover the entire area of ​​​​the walls in the hallway, you should subtract the area of ​​\u200b\u200bthe openings and add 10%. If the decor will be located around openings, niches, in separate fragments on open walls, draw an approximate sketch of the finish and take measurements of each section. Then the area is summed up and 10-15% is added for trimming. When buying a material, it should be remembered that the amount of an angular stone is considered in linear meters, and correct form- in squares.

Additionally you will need:

You can fix an artificial stone on liquid nails, cement-based or gypsum-based glue. The consumption of glue must be indicated on the packaging, so when buying, you should know the exact area of ​​\u200b\u200bfinishing and take it with a small margin.

If gypsum stone is used, a special miter box with high sides will be required for cutting.

When everything you need is acquired, you should start preparing the surface.

Step 1. Dismantling the coating

If the stone covers the walls of the hallway completely, the old coating is removed completely to the base. If separate sections are intended for decoration, the coating must be dismantled very carefully. On the wallpaper, mark the borders of the finish with a pencil and carefully trim stationery knife, leaving a margin for stones 1-2 cm wide. The glue from the wallpaper is soaked with water and removed with a spatula, the walls are thoroughly washed. Also remove the paint, if it is peeling or cracked, clean off the loose plaster.

Step 2. Aligning the walls

Stone laying must be done on a level surface. smooth surface- this will facilitate the workflow and increase durability decorative coating. Therefore, all small cracks, gaps, recesses are overwritten, and if there are differences of more than 5 mm, the entire area is better. Particular attention should be paid doorways: deep cracks may form along the perimeter of the box, for sealing which it is recommended to use a cement mortar.

Prices for mixtures for leveling walls and ceilings

Mixtures for leveling walls and ceilings

Step 3. Priming

Dry walls should be lightly sanded to smooth out the irregularities of the puttied areas, and then wiped with a rag to remove dust. After that, the surface is treated 1-2 times with an acrylic primer. If wallpaper is located around the perimeter of the treated areas, the primer should be applied in such a way as to capture the edge 1 cm wide - what will be hidden under the cladding.

stone laying

Decorative stone has jagged edges and consists of different sizes. Laying must be done in such a way that tiles of the same size are necessarily interspersed with larger or smaller fragments, and the seams do not match either horizontally or vertically. So the coating will look most natural and attractive. To understand how best to join the stone, you need to lay out the tiles on the floor, picking up the fragments in a certain order.

Step 1. Glue preparation

Pour dry glue into a container with water and stir well. The ratio of water and glue is indicated on the package, so there is no need to mix “by eye”. Failure to comply with the proportions reduces the strength of the connection or increases the consumption of glue. It is best to knead with a construction mixer, then there are no lumps left in the mixture. The finished glue should be homogeneous and resemble a thick paste in consistency.

Step 2. Laying the first row

You need to lay out tiles from the corner of the wall, and this can be done both from above and from below. When laying from top to bottom, the stone is less dirty with glue, and the coating is more accurate. If only the area around the opening is lined, start from the corner of the doors. For convenience, the wall can be marked by level with horizontal lines every 10-15 cm.

Now you can start styling:

Between the fragments, you can leave seams from 5 to 8 mm, especially if the stone is large.

After facing, the joints are filled with putty and embroidered, which makes the masonry more attractive. Small tiles can be fixed closely, the main thing is that the joints do not match.

Step 3: Finishing the Corners

For facing internal and external corners, you can purchase special corner tiles, which are more expensive than usual, but greatly simplify the workflow. If the budget is limited, you will have to adjust the stone yourself with a grinder or a hacksaw. There are 2 options here - lay the stone with an overlap or grind the edges at an angle of 45 degrees. When using the first option for external corners, open ends must be filed and tinted, otherwise they will stand out too much. In inside corners both ends are closed, so processing is not needed. The second option is more suitable for gypsum products, which are conveniently cut with a miter box.

So, first determine right amount fragments, cut them with certain side, file sections. Next, the stones are smeared with glue and alternately attached to the walls on both sides of the corner, carefully combining the joints. When the vertical of the corner is laid out, you can expand the masonry on the walls.

Step 4. Making the edges of the masonry

The edges of the masonry will look more attractive if the tiles are beautifully cut. The surface of the decorative stone has a clear texture, which makes it easier to trim the extreme fragments. Sawing with a hacksaw should be straight along the contour lines so that the cuts are the most natural. All cuts must be sanded with sandpaper.

Step 5. Seal the joints

bred plaster putty and carefully apply it to the joints, in the corners, along the perimeter of openings and switches. For convenience, you can use tight package, for example, from under milk. One edge of the bag is cut completely, and on the other side a small incision is made. Fill out the package putty mixture and squeezed into the seams with an even thin strip. If the solution is applied with a spatula, immediately wipe off the excess from the surface of the stone to avoid drying. After filling the joints, the putty is rubbed with a damp foam rubber sponge and left to dry.

Step 6. Finishing

The dried putty has White color, and therefore the processed places will stand out against the background of the stone. Paint will help get rid of light spots: in a small container, the pigment is diluted to match the color of the main coating and the patched areas are painted with a small brush. When the paint dries, the stone is covered with acrylic varnish. In places where the walls are constantly touched, it is better to apply the varnish in 2-3 layers.

To make the coating more voluminous, you can highlight the edges of the masonry with a golden or bronze dye. There is another option: a coating of the same color, but more saturated in tone, is applied to an artificial stone at an oblique angle. In addition, you can use lighting: light directed from above or from the side makes the masonry much more textured and clearer.

Video - Decorating the hallway with decorative stone

We will send the material to you by e-mail

If earlier only natural stone was used in construction and decoration, today not everyone can afford it. But there is a way out that will suit the owners of houses and apartments in all respects: decorative artificial stone in the interior (price, photo, recommendations - you will find all this in the article) looks majestic, it is not so expensive, and there are innumerable variations of wall decoration. Today, the reaction site explores the interiors of apartments and facades of houses, lined with decorative artificial stone, and invites readers to come with them.

Finishing the house with decorative stone immediately ennobles the structure, giving it a special charm.

Around you can see different areas of application of artificial stone: in any room of an apartment, office, public institutions, on.If the room is dry, then the use of artificial shell rock, cobblestone, slate is welcome. For wet rooms or in public places you can find "polished" granite, marble, glazed brick-like tiles.

A room with such decoration can take on a radically different look: become more comfortable or resemble a seashore. Each functional room has its own type of decorative stone. In the kitchen, it makes no sense to use rough coatings, since the main condition will be their frequent washing.

Decorative stone for outdoor decoration

An alternative to natural - artificial stone lasts just as long, but is easier to process: it is much easier to decorate the facade of even the most bizarre shape. Let's see how this type of cladding is made, and what properties it has.

The composition and properties of artificial decorative facing stones for the facade

The properties of artificial cladding include ease of processing, relatively low weight, a large assortment textures and numerous color variations.

An artificial stone is obtained by mixing different components that harden in special silicone or plaster molds. Thus, one surface always remains flat, and the second - textured.

From the inclusion of various components in the composition of the product, different kinds surfaces: porcelain stoneware, concrete decorative stone, agglomerates. For a concrete decorative product made of cement, perlite, sand and expanded clay are added. Additional components are gypsum, fiber or clay, as well as mineral inclusions. The latter increase the wear resistance of the quality and its thermal insulation.

For coloring products, dyes are used that do not fade from ultraviolet radiation. Pigment is added during mold filling. Complete drying takes a month. To select a stone for a room, their temperature standards are taken into account.

Clinker decorative stone

Clinker tiles are widely used for facade cladding: the brick texture is preserved. From clinker brick tiles differ only in size and thickness. Clinker decorative stone is obtained by high-temperature firing of especially plastic clay.

Related article:

Clinker tiles for interior wall decoration. In the review, we will tell you about the advantages of the material, tile layout options, step by step help you complete the decoration and show examples of design techniques in finishing various rooms.

Artificial granite and marble

If you mix polyester, natural stone chips, binder resins, accelerators and hardeners, you will get artificial granite.

Artificial marble has several varieties. It can be cast, oselkovy (gypsum), chipped, liquid (flexible). The most popular is the casting variety. This composite material from hardened polyester resin and mineral filler (marble chips, quartz sand). From the ratio and composition of the components, an artificial stone malachite, jasper, granite, onyx is obtained.

The properties of the material cannot be underestimated: it is a fireproof stone, so it is used near radiator heating. artificial marble acids, solvents, grease are not terrible - these are excellent qualities for a countertop in the kitchen. The products are pleasant to the touch and, unlike the natural counterpart, are warm.

Agglomerates

What are agglomerates? This is an artificial stone, consisting of a complex of rocks. The basis is usually granite, quartzite, marble, cement and polyester resins. Shell rock, metal shavings, aventurine, mineral pigments, colored glass are taken as dyes.

Inside the agglomerate there is a fiberglass mesh, the stone is very durable, it is not afraid of either minus or plus temperatures and their sudden changes.

Which stone to buy if it is decided to decorate the facade with decorative artificial material

To decide what kind of stone is needed, they take into account not only the color and texture of the product, but also the types of masonry. Perhaps you want to imitate brickwork with its rectangular shape or slate. closer to natural material there will be a laying under a natural stone.

The clinker stone produced under the brick is laid geometrically correctly.

Concrete stone is inexpensive, but has a considerable weight. The color of the product can imitate any natural finishing stone.

Polymer sand stone, made using polymers, filler (sand), easily imitates brickwork with chipped surface.

Ceramic stone for facades is made from clay, but with all the advantages of the material in a climate with temperature changes, the facade may begin to peel off.

Related article:

In this article, we will review the most common Decoration Materials for facades - plaster, brick, wood, stone, as well as various types of plastics.

Features of installation of decorative stone for exterior decoration of the facade

There are two ways to attach artificial stone to the facade of a building: wet and mechanical, and they are not mutually exclusive.

First, a reinforcing mesh is attached to the facade, a mass of glue is applied and the stone is pressed against it with the flat side. The gap between products plays a role. All seams are coated with a moisture-proof mixture.

Important! All facing works carried out at positive temperature.

All work starts from the ground. If it is planned to finish the facade at wooden building, then do not neglect the treatment of walls with antifungal agents. They also lay a vapor barrier and mount a metal facade mesh. After the wall is plastered, primed and then revetted.

Advice! Pegs can be laid between the seams, and they can be treated with grout. The stones themselves should be covered with a protective solution.

Artificial stone for interior wall and floor decoration

Artificial stone for wall cladding in the interior can be seen in homes more and more often. This is not a new word in design, but rather an opportunity to create a special, almost historical atmosphere. It makes no sense to describe all the amazing variety of textures and colors - in any online catalog you can find what we forgot to mention. Let's touch on the main types of decorative artificial stone materials for interior wall decoration.

The composition and properties of decorative stones for interior decoration with photo samples

Now let's talk about what these products consist of and what properties they have.

Decorative stone made of gypsum and colored concrete

Gypsum facing stone for interior decoration comprises gypsum mixture(G5), slaked lime, water and coloring pigments. Sometimes plasticizers are added - in any case, each manufacturer has his own ratio and full composition.

The surface of the products can be chipped, bumpy, with uneven edges, rubble (similar to boulders), arbitrary.

Gypsum products are easy to combine with other materials. Concrete artificial stone is characterized by a composition with sand, a plasticizer, dyes and components that increase strength. Sometimes expanded clay or pumice is added.

Quartz artificial stone and porcelain stoneware

Artificial porcelain stoneware consists of kaolin clay, feldspar, sand, chromium oxide, iron and manganese. All components are ground, pressed at a temperature of 1200°C. As a result, a durable, moisture-resistant and cold-resistant product is born. Such material does not pass electricity, is antistatic and simply beautiful.

Quartz stone based on agglomerate is outwardly identical to natural. Quartz is used as a filler. If cement was used as a binding base, then the products can be used outside, and for internal works based on polyester resins.

Acrylic and liquid stone

In addition to the above varieties artificial veneers, There is liquid stone for walls and acrylic. Acrylic products are used in countertops and other work surfaces, for window sills, sinks, sinks.

Acrylic pebbles are not combustible, but even at very high temperature they, losing strength, do not emit substances hazardous to health.

Artificial liquid stone is obtained from polymers with many shades. The product is of high quality and perfectly complements the design of the room.

Decorative stone in the interior of the house

If the owners of an apartment or house decide to decorate the interior with the help of unnatural stone coverings, then you need to understand that the finishing stone for the walls inside the apartment requires knowledge in terms of laying. But you can always turn to professionals in their field, because not everyone has a desire to participate in finishing work.

Often used for interior decoration decorative tiles under the stone. This does not reduce the area of ​​​​the room, it looks so natural that it seems that the room is actually made of stone. Decorate any room with stone products.

Kitchen and bathroom

Decorating the walls of the kitchen with decorative stone creates a historical atmosphere when cooking at the stone hearth.

The best choice would be glazed or lacquered coatings, because the porous material is able to absorb moisture, smell, and dirt. Therefore, we stop at non-marking products. Always in bathrooms high humidity- the stone texture must be non-porous so as not to absorb steam.

Living room and hallway

The stone will give the living room a sense of stability. The stone decoration of the hallway tends to pacify the person who enters. Therefore, it is worth thinking about the need for such decoration of the premises, because your own peace of mind is worth a lot.

Chalet style with it wooden elements perfectly complemented by imitated sandstone or granite. Gypsum materials, marble of light shades fit perfectly into the classics. And it is unthinkable without brickwork. Small hallways with stone trim, like an element of an old town.

It does not matter whether the whole room is decorated, or whether it will be separate fragments - it will be luxurious.

If the hallway is decorated in a stone spirit, then you can pick up a bench in a medieval Gothic style or a wrought iron product reminiscent of the boulevards of Paris.

Article