≡× MENU

• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Finishing of facades with polyfoam under a stone. Interior modeling designing a stone from foam plastic wall insulation under the window mini m k paint foam plastic How a torn stone is made from foam plastic

flexible stone FS- stoneis produced in translucent sheets ~ 2 mm thick, 96 x 60 cm in size (0.576 sq.m.), which are easily cut into “tiles”: 4 pcs - 48 x 30 cm, 9 pcs - 32 x 20 cm or "clinker tiles" 32 pieces - 24 x 7.5 cm, as well as "tiles" of any size.

flexible stone FS-Stone thanks to its high elasticity, it can be glued to almost any curved surface any material.

For flexible stone sticker FS-Stone it is recommended to use adhesives with high elasticity, for example: FS-Glue, ALLFIX, Ceresit CM 17 or their analogues.

Comparative table of consumption and cost of adhesives per 1m2:

GLUE	FS Glue	ALLFIX		Ceresit SM 17
Price	200 rub / l	270 rub / kg		960 rub / 25 kg
Consumption	80 - 200 ml/m2	0.3 - 0.6 kg / 1 m2		2 - 3 kg / 1 m2
Cost price	16 - 40 rub/m2	81 - 162 rub/m2		77 - 115 rub / m2
Foundation preparation	In some cases it is not required , including for bases: wood, drywall, plywood, chipboard, OSB, chipboard, MDF, foam plastic. Direct mounting!			In most cases it is requiredground preparation. The cost of preparation is 50 - 300 rubles / m2.
	Careful leveling of the surface is required.		For highly absorbent surfaces, pre-priming is advisable.

FS- glue . highly elasticglue for a flexible stone, after drying it becomes almost transparent. Possesses high adhesion, is steady against deformations, water - and frost-resistant. Can be used on drywall, GVL, GSP, chipboard, OSB , CSP, FTP, expanded polystyrene, metal, concrete, stone, wood. It is suitable for internal and external works (at positive temperatures). uneven surfaces if necessary, level with leveling compound. The adhesive is applied with a brush or roller to the surface to be glued. Consumption 80 - 200 ml/m2 depending on the porosity of the pasted surface. Ideal for creating a "glowing" stone, as well as for a "butt" sticker. When sticking “with jointing”, moistened tinted sand is rubbed into the adhesive remaining on the surface between the tiles of the flexible stone.

Universal facade adhesiveALLFIX http://www.allfix.ru/

Methanol-free, heavy-duty, all-weather, moisture resistant. It is used both for external, and for internal works. Working temperature range from -10 to +30! If necessary, level uneven surfaces with leveling compound. The glue is applied to the surface to be glued with a roller or a notched trowel in stripes over the entire surface. After 1-2 minutes, a flexible stone is applied. Consumption: when applied with a roller 300 g/m2, when applied with a notched trowel 600 g/m2

Cement highly elastic adhesives are also used for gluing flexible stone, for exampleCeresit SM 17 http://www.ceresit.ru/products/glues_for_tiles/93/

Flexible Stone Sticker FS- stoneat internal works simple and enough general recommendations. The surface must be sound, clean and dry. "Old Plasters" check for flaking, if necessary, replace loose layers of plaster, the rest primer. Uneven surfaces when applying adhesives FS- glueAnd ALLFIX if necessary, level with leveling compound. When using glue Ceresit SM 17 make a preliminary leveling of the surface with irregularities exceeding 1-2 cm. When sticking to drywall, GVL, chipboard, OSB, the seams between the plates should be reinforced with sickle tape, the corners should be reinforced with a painting profile. Tape and profile can be placed on the applied tile adhesive. When gluing on unprepared walls, follow the recommendations for outdoor work given below.

Sticker on load-bearing bases (brick, concrete, cellular concrete)

Installation of flexible stone on brick and concrete.

This group of materials includes all other materials with similar characteristics (smooth, non-absorbent and non-deformable surface), except for plastic. Plastic has a significant thermal expansion, therefore, for outdoor work, the use of plastic as a base is not advisable, in extreme cases, it is possible with the use of glue FS- glue.

Warming. If there is a need to insulate a wall made of such material, you can use EPS foam or mineral wool. Optimal material for insulation systems with flexible stone on smooth, non-absorbent surfaces - EPS expanded polystyrene. Before installing the insulation, the wall should be prepared in the same way as for installing tiles. (See the sticker for the insulation below.)

Foundation preparation . For non-gluing flexible stone using glue FS- gluecarry out a preliminary leveling of the surface with Ceresit CT 29 putty. For glue ALLFIXsuch preparation is carried out with a significant surface roughness. For cement-based adhesives, the brick surface must be treated with Ceresit CT 16 adhesive primer, and the concrete surface with Ceresit CT 17 penetrating primer.

Tiles can be glued directly to the primed surface using any quality outdoor tile adhesive. For forming seams gray color use gray adhesive Ceresit CM 17. For white joints - white outdoor adhesive Ceresit CM 115.

Installation of a flexible stone on cellular concrete, aerated concrete differs from that described above in that to prepare the surface for adhesives FS- glueAnd ALLFIX Ceresit CT 24 putty is used. And for cement-based adhesives, it is treated twice with Ceresit CT 17 penetrating primer.

Frame wall sticker (OSB, TsSP, FTP).

Installation of flexible stone on OSB, DSP.

OSB(oriented strand board) is a plate of several layers of pressed wood chips. Moreover, these layers are located at an angle of 90 0 to each other. The surface of the plate is treated with paraffin. The OSB board is not the easiest base for "wet" work, this is due to the significant deformation of the board when it gets wet. OSB boards are of different quality, despite the same declared OSB-3 brand. Plates supplied with Russian market USA and Canada (Arbec, Norboard, LP, etc.) are of lower quality than European ones. They have a low density and are practically not processed. The densest slab German made(t.m. Glunz). For exterior walls frame house a high density OSB board with a thickness of at least 12 mm should be used. A cheap Canadian stove is not suitable for this. The best option use of OSB boards with flexible stone cladding FS- stoneThese are SIP panels. They are quite rigidly interconnected and provide an acceptable geometry.

DSPthese are gray concrete slabs with a light filler of sawdust. Inexpensive and practical construction material. For the outer walls of a frame house, a CSP board with a thickness of at least 12 mm should be used. DSP plate-1 surpasses the TsSP-2 brand in terms of strength and accuracy of geometry. DSP board has two drawbacks: deformation during humidity fluctuations and high absorbency.

Surface preparation . The seams between the slabs should be reinforced with sickle tape, the corners and slopes of windows should be reinforced with a painting profile. Tape and profile can be placed on the applied tile adhesive. For adhesives FS- glueAnd ALLFIX this preparation is sufficient. For cement-based adhesives, it is necessary to treat the surface with a penetrating primer. Ceresit CT 17. It will eliminate the absorption of moisture from the tile adhesive. And for the base OSB additionally treat the surface with an adhesive primer Ceresit CT 16. It will provide a rough surface and protect against coloring pigments.

The tiles can be glued with any of the above-recommended adhesives or any good quality outdoor flexible tile adhesive. Attention! OSB boards, DSP boards are subject to deformations, therefore an elastic adhesive is required (elasticity index S1 or S2). For grey-coloured seams, use an elastic gray adhesive (Ceresit CM 17 or Lugato Flexibel). For white joints - elastic white adhesive for outdoor use (Ardal Best S2, Ardex X77W, Mapei Granirapid). You can also use white Ceresit CM 115 glue with an elasticizer Ceresit SS 83.

Installation of flexible stone on fiber cement.

Flat slates are sheets of concrete reinforced with asbestos fiber (asbestos cement) or polyester fiber (fiber cement). As a variation, there is the so-called aquapanel, this is a concrete sheet reinforced with a fiberglass mesh. Aquapanel is for indoor and outdoor use. Fiber cement panels are quite dense, so they do not absorb moisture and practically do not deform due to fluctuations in humidity. Similar materials - perfect solution For outer skin frame house for flexible stone cladding FS- stone.

Surface preparation FTP and gluing flexible stone are similar to working with DSP except that there are no increased requirements to the elasticity of cement-based adhesives, for example Ceresit CM 115 can be used without additional elasticizer.

insulation sticker (expanded polystyrene, mineral wool).

Installation of flexible stone on expanded polystyrene EPS

The optimal grade of expanded polystyrene for use in the facade insulation system is PSB-S 25 (density 15-25 kg/m3). It is permissible to use denser grades. to the base ( facade wall) polystyrene foam is attached to the glue ALLFIX or on a special adhesive for expanded polystyrene (eg Ceresit Thermo Universal or Ceresit CT 83). Foam boards are installed closely, without gaps and cross-shaped seams, similar to brickwork. Not earlier than after 48 hours, the expanded polystyrene plates are additionally fixed with dish-shaped dowels (the so-called parachutes). The dowel heads must be recessed flush with the surface of the insulation. The length of the dowel is selected so that it enters the base at least to the depth recommended by the dowel manufacturer for a particular wall material (more for aerated concrete than for reinforced concrete). The consumption of dowels is 5-7 pieces per m2.

Tiles can be glued directly to the surface of the Styrofoam using adhesives FS- glueAnd ALLFIX or high-quality cement-based tile adhesive for outdoor use. Use gray adhesive (Ceresit CM 17 or Lugato Flexibel) to form gray seams. For white joints - white adhesive for outdoor use (Ceresit CM 115).

Installation of flexible stone on XPS extruded polystyrene foam (appearance: very dense plates of finely porous insulation orange color, trademarks Stirofoam, Penoplex, etc.) is similar to working with expanded polystyrene, except that when working with it it is not advisable to use adhesives on cement base due to the complexity of surface preparation.

Installation of flexible stone on mineral wool

Dense plates made of pressed thin stone fibers of gray-green color, packed in a thermo-shrinkable film. Common trade marks- Paroc, Rockwool. For facade systems with flexible stone FS- stoneit is permissible to use mineral wool with a density of at least 130 kg/m3. These are, for example, Rockwool Fasad Butts or Paroc FAB 3.

Mineral wool slabs are installed to the previously prepared front wall in the following way. On the plane of the insulation plate, glue is applied with a large comb ALLFIX or adhesive composition for mineral wool Ceresit Thermo Universal or Ceresit CT 190. Mineral wool slabs are installed closely, without gaps and cross-shaped seams, similar to brickwork. Not earlier than 48 hours (for ALLFIX adhesive after 24 hours), the plates are additionally fixed with dish-shaped dowels (the so-called parachutes). The dowel heads must be recessed flush with the surface of the insulation. The length of the dowel is selected so that it enters the base at least to the depth recommended by the dowel manufacturer for a particular wall material (more for aerated concrete than for reinforced concrete). The consumption of dowels is 5-7 pieces per m2.

Insulation surface preparation . A base plaster layer reinforced with Ceresit Thermo Universal or Ceresit CT 190 fiberglass mesh should be applied to the surface of the mini-slab. It is not necessary to prime the mini-slab. External corners and wall openings are recommended to be leveled and reinforced with an angled painting profile. The profile can be fixed with a base plaster layer.

Tiles can be glued to the surface of the base layer after 24 hours using adhesives FS- glueAnd ALLFIX or high-quality cement-based tile adhesive for outdoor use. To form gray seams, use Ceresit CM 17 gray adhesive or Lugato Flexibel. For white joints - white adhesive for outdoor use Ceresit CM 115.

Sticker on fixed formwork (Durisol, Velox, IZODOM).

Installation of flexible stone on formwork Durisol, Velox similar to working with DSP except above the surface fixed formwork VELOX are embedded parts made of thick steel wire. Over time, they will be able to rust the seams of the cladding with flexible stone. Therefore, before installation, they must be painted over with nitro enamel or other suitable paint and varnish composition. In addition, to hide the irregularities formed by the embedded parts, when working with cement-based adhesives, a comb with a large tooth (6-8 mm) should be used. In this case, the consumption of glue will increase. And when working with adhesives FS- glueAnd ALLFIX it is necessary to "deep" mortgages into the VELOX slab even at the construction stage so that they do not protrude above the surface.

Installation of flexible stone on the formwork IZODOM completely similar to working with polystyrene foam EPS.

Making in reality is not like that hard work as it might seem at first.

To do this, you need to stock up on a little patience, imagination and a set of simple tools and materials, including:

• directly the foam itself;
• soldering iron;
• paint or coloring pigment;
• concrete;
• mesh netting;
• putty knife;
• sand.

In some cases, wire, wire cutters, stationery tape and plastic bags. The list of tools used depends on what exactly should be the result: imitation brickwork or huge decorative rock for installation in the garden.

Decorative stone for the garden

To make a decorative stone for installation in the garden with your own hands, you will need a chain-link mesh with small cells. The frame of the future cobblestone or rock fragment will be made from this material. The resulting form must be filled with pieces of foam. To avoid large voids, the size of these pieces should be no more than 2-3 centimeters.

The bottom of the frame of the future stone should be tightened thin wire or glue stationery tape. Construction tape is not suitable for these purposes.

The next step is to prepare concrete mix . Portland cement in company with river sand is best suited for these purposes. The proportions of these materials in the mixture should be approximately equal to the ratio of one to three. The resulting mixture should then be diluted with water, mix thoroughly, leave for 7-10 minutes and mix again. To make the mixture homogeneous, you can mix it by cutting. That is, cut off a small piece of concrete from the edges, move them to the center of the tank, mix and repeat this operation over and over again. The output should be a mixture, the consistency of which resembles dough. Cement should not drain from the spatula, but fall off in large pieces.

Then ready mix applied to the surface of the stone with a layer of about 15-20 millimeters thick. After that, the workpiece is moistened with a spray gun and covered polyethylene film for a day. You can also wrap the future stone with an ordinary bag from the nearest supermarket, if it fits in size.

At the end of the day, you can begin to prepare the surface of the cobblestone or rock for painting.

Preparation for painting a decorative stone is usually carried out using a coloring pigment.. One tablespoon without a "slide" of this substance suitable color in combination with a faceted glass of Portland cement, it is diluted plain water to the consistency of thick cream. Such a mixture is applied to the surface of the manufactured product with the help of hands dressed in rubber gloves. As soon as the coating of the stone begins to dry out, it is necessary to give the stone a natural look with a spatula: add chips, scratches and notches.

To consolidate the effect, several punctures should be made in different places, cover the stones with a film and leave to dry until completely dry. Dry and ready for painting, the product is painted with the same mixture as on preparatory stage. The main task at the moment, it is not so much decor as toning and giving a natural color to the stone. The product should not look artificial. The coloring composition is applied with a toothbrush by spraying. That is, the decorative stone is covered with paint inhomogeneously, various blotches appear, darker and lighter places. Disliked results of labors can be washed off with plain water and repeated final stage again.

It remains only to fix the result with a transparent aerosol varnish, which is sold in any auto supply store.

Wall decoration with foam stone

Styrofoam can make an excellent imitation of masonry, brick walls and other surfaces.

This effect can be achieved in two ways:

• make stones or bricks of future masonry for walls with your own hands separately;
• to give the shape of masonry to entire segments of the walls on a large piece of foam.

In any case, first you have to prepare the stones themselves with your own hands. D To imitate brick walls, the foam is either cut into equal rectangles, or each decorative brick"turned" on a large piece of foam. The first method is good because thin pieces of material are suitable for its implementation. In the second, you will have to use a piece of foam of greater thickness.

Styrofoam is easily processed with your own hands with a knife and scissors. Giving the masonry segments the necessary geometric shape shouldn't cause any problems. So that the coating does not look artificial and takes on the appearance of real brick walls, defects should be added to it: chips, cracks and scratches. This can be done with a soldering iron. The heated metal tip of the tool will leave behind uneven and asymmetrical marks, which, in principle, should be achieved.

Styrofoam, when heated, releases toxic substances into the air. When working with a soldering iron, be sure to use a respirator, and work should be done in a well-ventilated area, and preferably on outdoors or on the balcony.

To give the foam coating of the walls a look wild stone it would be more appropriate to use large and thick pieces of material. Each decorative masonry stone is carved with their own hands separately using a knife, scalpel, spatula and other improvised tools. Before starting work, you should practice a little on small area piece of foam. To make the stones of the future masonry walls look natural, you can draw their contours with a pencil. And along the same contours, leave a shallow groove 5-15 millimeters wide, which will imitate the cement mortar between the stone.

After performing the above operation, the coating should be given volume. Wild stones differ from brickwork not only in the shape and size of the elements, but also in their depth. The profile surface does not have to be perfectly flat. Somewhere it should be thicker, somewhere thinner. You can achieve this effect with sandpaper.

When imitating masonry from wild stone for walls with your own hands, you should remember that each “pebble” must be unique, and not an exact copy of its neighbor.

After the decorative panel is ready, it can be mounted on one of the walls with glue or liquid nails. The surface is recommended to be pre-cleaned of dust and dirt, otherwise brick or stonework will have every chance of being on the floor at one fine and most inopportune moment.

If there are only small fragments of foam plastic from the materials, then do not despair. With glue, stationery knife And cement mortar from them you can assemble a decorative stone of any size.

Painting of newly-appeared masonry or brickwork can be done either with a mixture of pigment and Portland cement, or with ordinary paint. In this case, uniformity of the coating should be avoided. Various inclusions, stains and other attributes of the work of a novice painter will give the wall a natural appearance. And in conclusion, it remains to debunk the myth about the soundproof properties of foam. This material does not absorb or isolate noise. To ensure silence in your home, you should use mineral wool and other fibrous structures.

Video gallery

Photo gallery

The question of how to make a wall decor under a foam plastic stone with your own hands is quite relevant today. Such decorative panels finish all sorts of surfaces, from edging on mirrors or windows to the entire area of ​​\u200b\u200bthe wall.

The popularity of the material is due to the light weight of the structure and ease of installation, which is especially important in apartments located in multi-storey buildings where the use of heavy bricks is impossible.

We make decor with our own hands

To make an imitation of foam plastic brickwork with your own hands, it is recommended to use polyurethane fine-grained panels, which have good heat resistance and do not crumble.

If it is not possible to purchase such material, you can replace it with ordinary ceiling tiles.

In addition, you need to prepare the following materials and tools in advance:

• stationery knife;
• electric soldering iron;
• glue, putty;
• primer, varnish.

In addition, sheets of building extruded polystyrene foam can be used, since it has characteristics that are ideal for this purpose.

Check out comparative physical properties materials can be found in the table below.

Work order

Finishing a wall or a separate element of a room under a brick or a natural stone favorably transforms the surface, making it more aesthetic and attractive. In addition, the material is a good heat insulator, therefore it will act as a heater.

Photo instructions for making foam decor

Procedure self-manufacturing tiles looks like this:

In addition to the described method, there is another option for making imitation brickwork from foam. It differs from the first one in that not only a light heat insulator is used for this, but also cement with quartz sand. Detailed instructions for brick imitation, see this video:

Based on the fact that other components are used, the order of work on their manufacture will also differ. However, it should be noted that there is nothing complicated in it, and even a person who has never done similar work can cope with it:

The procedure for both manufacturing methods is not difficult. The result will not keep you waiting, but will delight you with the transformed look of the room immediately after application.

To emphasize the effect of the natural equivalent, and the surface that imitates the stone is more like a real one, it is recommended to use paint in several shades. In this case, the main color is pre-coated, and the secondary shades are done with a dry brush.

Room insulation is very actual topic in our time, because energy is not getting cheaper. One of the most popular heaters is penoplex, and we want to talk about the scope of its application. Especially actual question- this is the finishing of penoplex, and we will talk about this in detail.

Foam insulation and finishing

Internal work

Everyone is well aware that the insulation should be located with outer side walls. However, such an arrangement is not always possible: the facade has an architectural value, access to the outer surface is difficult or there is no way to pay for the work of high-rise workers. Then resort to internal installation thermal insulation, and the most convenient material for this is penoplex ().

From a chemical point of view, penoplex is extruded polystyrene foam High Quality, the thermal conductivity of which is reduced as a result of special processing by 30% compared to conventional foam, although the price is slightly higher.

Also worth noting:

• stronger and more resistant material structure;
• improved sheet forming;
• increased surface adhesion to adhesives and finishing solutions.

Important! A significant advantage of expanded polystyrene is its absolute hydrophobicity, the material is not afraid of moisture, does not react with water and does not dissolve in it, practically does not absorb vapors and water particles into its structure, and does not rot. All this makes it possible to recommend this species insulation for various kinds works on thermal insulation of building structures.

To install the material on the walls from the inside of the room, you can use two methods:

• dry,
• wet.

The dry method involves the installation of a heat-insulating layer under a hard coating - lining, gypsum-fiber sheets or panels.

In this case, the material is placed between the coating and the wall after the frame is built, which is then sewn up with drywall sheets, boards, plywood or other finishing material. It is obvious that in this case, since it is covered with other material.

Another thing is the wet method:

• here the sheets are mounted on the wall;
• then puttied or plastered.

In this case, the finishing is carried out directly on the surface of the insulation, and only then this layer is covered with paint or wallpaper.

The work is not particularly difficult, it can be done alone with your own hands, only minimal skills in using a spatula and a drill are required:

• The wall is cleared old finish down to brick concrete base, then repair cracks and other defects, after which the surface is primed;

• Starting from the upper left (or right - whichever is more convenient for you) corner, they begin to mount the sheets on the wall. To do this, glue is applied to them, pressed and fixed with dish-shaped dowels. The seams between the sheets are shifted in each row by half a sheet like brickwork;

• After the wall is completely covered with foam, you should carefully coat with glue or fill the seams with sealant. You can also use mounting foam. In addition to the seams, the dowel entry points are filled with glue;

• Before finishing the foam, it is covered with a fiberglass reinforcing mesh. It serves for better adhesion of putty or plaster to the surface. vertical wall. The mesh is stretched and glued to the insulation layer with glue; for convenience, you can pre-fix it with a construction stapler;

• When the mesh with glue is dry, the entire wall is primed with a deep penetration compound;
• When the primer is dry, you can start applying putty. For this dry gypsum mixture pour into a bucket of water (about half) and knead the solution with a drill with a mixer nozzle. The material is brought to the consistency of thick fatty sour cream;

• Using a wide metal spatula, putty is applied in a uniform thin layer over the entire surface of the wall. After the layer has dried, it is rubbed with a polyurethane or emery grater to a state of a smooth, uniform surface;

• For painting, a leveling agent is applied to the first layer of putty. finishing layer, which is then also polished with a grater. Convenient to use electric grater with replaceable abrasive inserts;

• Sanded putty is painted or pasted over with wallpaper.

Important! Do not forget during the installation process to cut holes in the polystyrene foam for sockets and switches.

outdoor work

For outdoor work, polystyrene foam is also used, which is mounted:

• or wet way with subsequent plastering or other cladding;
• or laid under a ventilated facade.

With wet laying, the procedure does not differ from a similar coating internal walls. The only difference is the use facade plasters and putties at the finishing stage.

In addition, after gluing the reinforcing mesh, installation is possible facade views facings:

• stone,
• tiles,
• porcelain stoneware and others.

At frame structure facade insulation is placed between the frame rails, fixed with glue and dowels (sometimes they leave a gap between the wall and the foam plate, fixing the sheets between the rails mounting foam) and fill all cracks and joints with sealant or foam.

• block house,
• lining,
• panels made of metal or plastic,
• porcelain stoneware, etc.

Important! When using expanded polystyrene as an external insulation, it is important to choose a non-combustible material, since otherwise the facade may ignite with the release of toxic smoke.

Conclusion

Penoplex can be used for internal and exterior finish walls to insulate them. Working with this material is simple, our instructions are suitable even for a novice builder ().

Incomprehensible moments are explained by the video in this article.

Even 30 years ago, hardly anyone could have imagined that seemingly weak foam plastic would be actively used for the exterior decoration of buildings, but today, finishing facades with stone-like foam plastic is not something surprising. Of course, if you know the properties of this material. And here are ten benefits of foam that make this material so popular in facade decoration private houses:

1. Styrofoam resistance to weathering. He is not afraid of rain, snow, cold or heat, because
   polystyrene is an all-weather material and, unlike other non-polymeric ones, does not require corrosion protection;
2. water repellency. Expanded polystyrene not only does not absorb water, but also repels it, so even in strong
   rain, your house will be safe (unless, of course, other materials are selected for this);
3. UV resistance. Even direct exposure to solar radiation is unaffected by foam plastic - unlike, by the way, from
   many other polymers;
4. reliability. Styrofoam withstands Various types mechanical influences - it can only be damaged
   cut, so your foam finish will last longer than, for example, plaster, tile, or
   any other natural or artificial materials;
5. durability and wear resistance. Styrofoam does not age over time and can serve for decades without losing its
   operational qualities;
6. simple installation. Foam panels are convenient to glue due to the light weight of the material and its pliability. Also
   installation work facilitates the fact that it is not difficult to adjust the location of the panels in relation to each other, and
   extra pieces are easy to cut off;
7. price. One of the main reasons for the popularity of this type of finish is cheap materials and economical technology
   production, which puts foam panels out of competition in comparison with other methods of finishing facades. A
   our prices are even more favorable, since we ourselves produce foam structures;
8. environmental Safety. Confirmed international standards- foam products are used even
   V Food Industry(food packaging, disposable tableware, etc.);
9. good thermal insulation. The problem of home insulation concerns not only residents of the northern regions, but also those who
   lives in temperate climate, because our winters are also quite severe. Styrofoam together with other materials
   will help to warm your home well;
10. appearance. Properly selected panels will allow you to simulate almost anything, because the foam can be subjected to and additional processing various compositions.

Of course, for decorative finishes walls country house foam panels need to choose quality material treated with special protective and decorative coatings. At the same time, you long years forget about the decoration of the facade and walls of your house or cottage and every time you will admire appearance your dwelling.