How to get rid of mold in the bathroom. How to get rid of mold in the bathroom in different ways
Causes of mold in the bathroom
Mold is small fungi that accumulate in patches of various shapes. They usually appear on something damp or rotting. Today, a large number of mushrooms are known.
Some of them are safe for humans. But there are also very dangerous species. They can cause significant harm to humans and animals.
Each of us watched dark spots on the ceiling, wall or in the bath. This is the same mold. These microscopic fungi are actually neighbors with us. But we often don't notice them. easy enough. To do this, you need to use special chemicals.
They do not appear in every apartment. First, the apartment owners create favorable conditions for them.
Let's consider the main reasons for the appearance of an uninvited guest:
- One of the main reasons is high indoor humidity. As a rule, in this case, fungus appears on the walls. But it may appear in other places. If the humidity level in a room reaches 70%, then black or gray spots may appear on the walls.
Often the cause of high humidity in a room is a lack of ventilation or heating. And it is also necessary to pay attention to the quality of thermal insulation. At a consistently high difficulty level, the walls may get wet.
But the favorite habitat of mold is the bathtub. Since it is in the bathroom that the humidity is maximum. Often the cause of high humidity in the bathroom is the lack of an exhaust hood or modern system conditioning.
And it is also necessary to clean the hoods regularly. The cause of the appearance must be eliminated as quickly as possible. Because it is quite difficult to remove mold in the bathroom between the tiles. The bathroom can often be very high level humidity 90–95 percent. Therefore it must function quality system
- ventilation. If you do not install a special ventilation system, then moisture will condense in inappropriate places. And condensation is a home for fungi. Consider these recommendations when renovating your bathroom.
The bathroom must have good ventilation . Because it is in the bathroom that the maximum level of humidity is achieved. If you have such a problem, then we recommend paying attention to the ventilation.
It may be clogged with dirt or dust. In this case, it needs to be cleaned. In case of insufficient ventilation black mold may appear on various surfaces. This occurs due to poor air circulation. In this case, favorable conditions are created for fungi.
- Insufficient lighting. IN modern apartments the bathroom has no windows. Therefore, favorable conditions are created for the development of fungi. After all, it is sunlight that destroys fungi. Often it is impossible to solve this problem. Therefore, in this case, experts recommend upgrading the ventilation system. This often solves the problem.
- Late treatment of mold. It is important to start fighting the uninvited guest as early as possible. And for this you can use various chemicals. You can also use regular baking soda or vinegar. With absence special processing, possibly further spread of fungi. If no action is taken, then black spots may appear in all rooms.
- Moisture that comes from the soil. The presence of moisture can be noticed by people living on the first floors. As a rule, moisture is present in the form of drips. It can be found at the junctions of walls. To solve the problem, it is necessary to conduct a so-called examination of the insulation condition. After this, repair work must be carried out.
- Leaking drain. It is very easy to detect such a problem. Drips appear on the plaster. In this case, it is recommended to carry out repair work.
- Freezing of external walls. This is a fairly common problem. Detecting freezing is quite simple. To do this, you need to look at the edges of the walls. When the walls freeze, a dark coating appears.
- Poor condition of the water supply system. When this problem occurs, moisture occurs along the passage of the pipes. In this case, it is recommended to carry out so-called precision dehumidification.
What are the dangers of mold?
Not all types of mold are so dangerous. There are very harmless species that do not pose a danger to humans and pets. But we'll stop at dangerous species, which can cause harm to the health of both humans and animals.
And the walls are quite toxic and allergenic. Some fungal colonies produce toxins that can cause various diseases. The poisonous toxins present are called aflatoxins. These substances can accumulate in the human body.
In general, the human body can cope with a certain amount of toxic toxins. Problems begin when the number of mushrooms exceeds all permissible limits. In this case, the human body cannot cope with toxic toxins. A failure occurs. And toxins begin to accumulate in the liver.
Inhalation of spores can lead to various diseases:
- various allergies;
- mushroom;
- angina;
- various bronchitis;
- headaches of various localizations;
- acute respiratory infections and other colds;
- common cough;
- allergic rhinitis, etc.
Fungal spores can also cause other diseases. This occurs when spores come into contact with the skin.
In this case, a person may develop various skin diseases:
- dermatitis;
- eczema.
Often these diseases are difficult to diagnose medically. And also spores can cause damage to nails and hair.
In addition, the spores are dangerous to inhale. Because you risk getting conjunctivitis, runny nose and other diseases. In rare cases, it is detected bronchial asthma. And various diseases of the musculoskeletal system can also be caused. A person may experience so-called rheumatic pain.
Mold yellow color the most dangerous for humans and domestic animals. But it appears on various foods. It can cause various serious diseases. For example, cirrhosis of the liver.
Yellow mold very rarely appears in the bathroom. These are isolated cases that should not even be considered.
At risk are pensioners, children, and people with reduced immunity. Children are most often affected by spores. Because they still have a weak immune system.
Stories from our readers!
“My sister gave me this cleaning product when she found out that I was going to clean the barbecue and wrought-iron gazebo at the dacha. I was delighted! I did not expect such an effect. I ordered the same for myself.
At home I cleaned the oven, microwave, refrigerator, ceramic tiles. The product allows you to get rid of even wine stains on carpets and upholstered furniture. I advise."
How to remove mold?
How to quickly remove mold in the bathroom? This question is often asked by apartment owners. If you want to quickly solve the problem, then contact special companies.
In this case, everything will be done for you.
Removing mold from caulk will not be easy. What will it take?
- metal bucket;
- running water;
- soap solution;
- regular brush;
- sponge or rag;
- spray;
- special chemical bleach.
Let's look at the detailed instructions:
- First, you need to fill a metal bucket with running water.
- Now you need to add soap solution to the bucket. After this, the solution must be thoroughly mixed. Foam should appear.
- Now soak the sex sponge in the prepared solution.
- Wipe the seams thoroughly.
- Now you need to pour the bleach into the spray bottle. After this, spray bleach onto the sealants.
- Wait 20–30 minutes.
- Now you need to clean the seams. To do this, use a regular brush. Do not use excessive force.
- Wipe the seams with running water.
- If necessary, repeat this procedure again.
You can remove mold from silicone in the bathroom yourself. Use the same method described in the previous section.
Folk remedies
Let's consider three ways:
You need to prepare a special solution.
Recipe:
- - two parts vinegar;
- - one part boric acid;
- - four parts running water;
- - two parts peroxide.
You need to mix all the ingredients thoroughly. Then you need to wipe the affected surfaces.
First you need to prepare a solution. You only need to use two ingredients - 2 glasses of water and 2 tablespoons of tea tree oil. Now you need to apply this solution to the surface. To do this you need to use a special sprayer.
Sprinkle some baking soda on the surface. Now you need to fill the surface with vinegar. Now you need to wait a few minutes for the foam to settle. Now you need to thoroughly rinse the surface with plain water.
Chemicals
In the store you can purchase the following chemicals:
- various solutions;
- ready-made mixtures;
- antiseptics;
- slide;
- special preparations (Dali, Mil Kill, Izotsid, Antifungal).
- copper sulfate.
Be sure to use special personal protective equipment. Chemicals must be used in strict accordance with the instructions for use.
Mold removal rules, devices
Let's look at the basic rules for mold removal:
- First use natural remedies. If there is no result, then use special chemicals.
- Always use special personal protective equipment.
- If necessary, use the services of companies.
- Modern methods of combating mold
The most modern method is treatment with special chemicals. These chemicals are very toxic. That's why companies use this method. Company employees use special personal protective equipment.
How to prevent mold?
- Insulation. If your house is cold, then it needs to be insulated. Contact a company that insulates the exterior walls of your home. It is also necessary to take care of good thermal insulation. In addition, insulating your home will help you save money. cash. Because heating costs will be significantly reduced.
- Furniture arrangement. Furniture should not be placed close to the wall. In this case, air stagnation occurs. Therefore, it is necessary to move the furniture a little away from the walls. In this case, the air will be ventilated and stagnation will not form.
- Furniture and coverings from natural materials. Experts recommend buying floor coverings and furniture made from natural materials. Because they absorb moisture well. Artificial materials do not absorb moisture well. This creates a favorable environment for the development of fungi.
- Batteries must not be covered. Heating radiators must not be covered with curtains or various panels. Because in this case, air stagnation is created. The air cannot circulate properly.
- Doors must be kept closed. Experts recommend keeping bathroom doors closed.
- The bathroom must not be allowed to cool down. IN winter time You can't turn off the heating for years. The residential premises must maintain a certain temperature regime. If you turn off the heating, the walls will begin to cool. This creates favorable conditions for fungi.
- Ventilation. The apartment must use a special air conditioning system or conventional ventilation.
Often you have to deal with the fact that mold may appear in the house, which is very difficult to completely destroy. Therefore, the owners are interested not only in the nature of its origin, but also different ways to eliminate it. In this article we will tell our readers about how fungus and mold appear in the house, as well as how to remove fungus in the bathroom and other rooms.
First of all, owners should know that fungal spores are found in almost any room of the house: living rooms, basements, cellars, pantries, bathrooms, kitchens. Such microorganisms constantly spread throughout the house by air, so getting rid of the fungus is quite difficult.
Of course, the development of a colony does not occur in any place, since organic matter requires certain conditions so that they can actively reproduce.
The most favorable environment for mold and mildew is high levels of humidity and heat. Therefore, fungus is most common in the bathroom.
In private homes, a colony of microorganisms can be found in the bathroom and basements, since it is always quite damp there.
In places where there are usually temperature changes, where sunlight enters, microorganisms usually do not develop. Therefore, on the balconies, in wooden houses or rooms that are regularly ventilated, there are no such formations.
Most often it is necessary to fight fungus in bathrooms, since favorable conditions for the development of microorganisms are always maintained there. Spores can get there from the living room and settle on the tiles, or through an vent in the wall from neighbors or from the street. 
In apartments, organic matter will develop faster in this place, because most cities here have heating systems and also use hot water. Because of constant use water, moisture will not have time to quickly evaporate, and favorable conditions for fungal growth will remain in the room.
The first sign of mold will be the formation of black dots on tiles, or dark fungus on the ceiling in the bathroom if the surface is not perfectly smooth.
The places where colonies of microorganisms appear is not limited by the surface material, since they are able to multiply almost everywhere if a sufficient level of humidity is maintained. The optimal level of humidity in a residential area is considered to be from 70% to 80%, but when it reaches more than 90%, spores will begin to grow. Then fungal formations can be detected in other places, since the concentration of these microorganisms in the apartment will increase sharply. After some time, they can be found in the refrigerator and inside kitchen cabinets.
Since this type of organic matter poses a significant threat to human health, it is advisable to get rid of mold and mildew in the bathroom as quickly as possible. If you do not remove such neoplasms from your home, the owners may have problems with the respiratory system, since the spores can clog the lungs and develop in them. Destruction of fungus in the human body is a very complex and lengthy procedure, since it retains ideal conditions for development.
Video “How to get rid of fungus”
From the video you will learn how to remove fungus from the bathroom.
We destroy the fungus
So how to remove fungus in the bathroom? To get rid of the growing colony of microorganisms in your home, you will need special chemicals and mold-killing grout preparations. Folk remedies for solving such a problem are not very suitable, since this type Organic is very resistant to many natural components. The only exception is very concentrated substances, for example, vinegar and baking soda. 
It is impossible to simply wash away mold formation in order to completely get rid of it. Visually, you will not see the remaining spores on the wall, but after a while the fungus will appear again. Against fungus in the bathroom, you should use more effective means. It is imperative to choose methods that will defeat you.
On how to remove fungus in the bathroom, you should take the advice of experts. First, you will need to carefully remove the moldy area. It is necessary to cut out a piece of wallpaper, or cut off a piece of plaster, or remove several tiles where there are black spots. After this, you should dry the room thoroughly to reduce the humidity level. This is followed by treating the room with various chemicals following the instructions. The walls will need to be treated at least twice with an interval of 24 hours. 
Only this method of control is effective, since mold is very difficult to remove, and not every method can help in such a situation.
It is difficult to choose for protection against pathogenic organics suitable remedy, but preventive measures remain relevant. Always try to ventilate the bathroom and other areas in your home that experience high levels of humidity. And during construction, the walls can be treated with a special antifungal agent that will help protect the house from mold.
Chemicals
Using chemicals is one of the most effective ways to remove mold and mildew. They need to treat the affected surface and then clean it.
Antifungal drugs should be sprayed on the surface where pathogenic microflora was found. Of course, children and pets will need to be removed from the room, since concentrated antifungal agents can be harmful to health. It is strongly recommended to wear gloves and safety glasses when handling the premises.
Usually, copper sulfate is used as the main substance that kills fungus on the ceiling and walls in the bathroom. It is at the heart of Spectrum, PS 50, as well as Snowballs and Fungicide Titan. These drugs have affordable price, but do not use too high a concentration of vitriol, as it may cause another type of fungus to appear. 
How to get rid of fungus in the bathroom using another active substance? Another excellent remedy for fungus in the bathroom is any chlorine-containing chemical agent, even ordinary white. Remember that you need to wear gloves when working with it, protecting the surface of the skin - this is an extremely toxic substance that can cause chemical burns.
How to remove mold from tiles
If mold appears on the bathroom tiles, the walls will need to be treated with a special product. Cleaning such surfaces on walls is much easier than removing colonies of microorganisms from sealants or rubber surfaces. It will be easy to remove pathogenic microflora, but the main goal is to kill spores that may remain in the grooves and crevices between the tiles or tiles.
So what to do in such a situation and how to deal with such a problem? It will not be enough to simply clean the surface and use detergent.
One of the popular methods that will help remove pathogenic microflora is the use of vinegar and baking soda or bleach. You will need to dilute the soda a little with water, and simply pour the vinegar into a container and apply it with a brush to the tiles or the joints between them. After this, you need to wipe with a rag or sponge in the place where the liquid was in order to completely remove the solution. To consolidate the result, you can go over these places again with a sponge, which will be treated with the same product. 
Thus, you can remove mold not only in the bathroom, but also in other rooms. The advantages of using soda and vinegar include the fact that they have a low level of toxicity, and their use poses virtually no threat to the human body.
Removing mold from sealant
How to clean fungal growths from sealant and rubber gaskets? In this situation, you can also use vinegar. Soda is not suitable for this task, since during friction the abrasive particles can damage the structure of the sealant. As a result of such cleaning, it may begin to leak air and lose its value.
Fungus on the sealant, which is often used to fill seams in the bathroom, is also extremely susceptible to the development of fungal formations. Just complete removal sealant and completely updating the joint is a troublesome and expensive task. Moreover, the result lasts for a maximum of six months or a year, and then it will appear again. 
Fungus on silicone will not go away without treatment with special means. Therefore, treating the bathroom from mold is silicone sealant should consist of several stages:
- removing old sealant;
- you need to walk through this place blowtorch, that is, literally burn out all the fungus;
- apply new sealant.
Furacilin against fungus
Furacilin can be used against fungal formations. Sold in pharmacies in the form of an alcohol solution or tablets. 
HOW TO REMOVE MOLD IN THE BATHROOM BY YOURSELF Black mold in the bathroom can cause a lot of trouble for the housewife, because due to reproduction with the help of microscopic spores, the fungus affects large areas of the walls and ceiling in a short period of time. It is necessary to get rid of this problem immediately after it appears, since mold not only makes the interior of the bathroom unsightly, but can also be dangerous to the health of people and pets. You can clean tiles from fungus with your own hands, without resorting to the services of specialized cleaning services; to do this, you just need to know some basic points. Preparation for removal You can remove fungus from the tiles on the walls and ceiling in the bathroom with your own hands using specialized products, you can also use folk recipes. Regardless of the chosen method, you need to carry out preliminary preparation so that the procedure is most effective. Don’t forget that mold is not only unsightly, but also dangerous to health, so it is recommended to prepare in advance: thick rubber gloves for cleaning; a medical mask or cotton-gauze bandage, and when working with strong household chemicals, a respirator; protective glasses; sprayer for convenient treatment of hard-to-reach areas on walls and ceilings; a brush, sponge or brush for applying the composition; non-food container for preparing the solution. Before using any product you choose to completely clean the surfaces in the bathroom from black fungus, you need to clean upper layer mold. To do this, use an aqueous solution of a chlorine-containing product; it is applied with a soft sponge, while simultaneously washing off the mold from the surface. Household chemicals In hardware stores you can find specialized products for almost any need, and getting rid of mold in the bathroom was no exception. Among such products you can find both budget and more expensive imported ones, but there is practically no difference in the effect of their use. Bleach "Whiteness" The cheapest product among household chemicals can be called "Whiteness" domestic production. It was originally intended as a laundry bleach, but can also be used to combat mold on bathroom walls and ceilings. The destructive effect of “Belizna” on the fungus is determined by the chlorine content in its composition. For processing ceramic tiles you need to dilute the white with water in a ratio of 1:10, and in order to remove the fungus from plastic panels, the concentration must be halved. Cillit Bang This brand produces a specialized product that allows you to effortlessly destroy accumulations of black mold on the walls and ceiling in the bathroom. It is ready to use immediately after purchase, it does not need to be diluted with water, and it has a convenient spray form, which makes it easy to spray on any surface. Many note its impeccable effect on smooth surfaces, however, in the space between tiles, Cillit Bang is not always effective. This spray can be used not only to remove mildew on walls and ceilings, but also to get rid of black spots on a bathroom curtain. Veksa against mold This specialized product allows you to quickly and without special effort remove mold from bathroom surfaces, releases it Russian company. Veksa allows you to remove black fungus from ceramic, plastic, wood and stone surfaces, and in each case the concentration will be different. The product is available in the form of a spray, so it is convenient to apply it to any surface without using additional tools. Folk remedies Fighting mold on the walls and ceiling in the bathroom can be carried out not only with the help of specialized purchasing funds, but also when using solutions prepared by yourself. This option will be cheaper than buying household chemicals, but in some cases it may be less effective. Copper sulfate The most popular means for removing mold from walls and ceilings in the bathroom is copper sulfate - small blue crystals that can be purchased at hardware stores. To get rid of black fungus, you will need to prepare a solution at the rate of 100 g copper sulfate for 10 liters of water. Treatment with this product must be carried out only when using personal protective equipment. Hydrogen peroxide This popular not only in medicine, but also in households can be considered the safest of all methods for removing black mold. To clean tiles and other affected surfaces, you must use 3% hydrogen peroxide. However, it should be borne in mind that alone she does not always cope with the task; sometimes it is necessary to prepare a complex solution with her participation. Boric acid, vinegar and hydrogen peroxide To enhance the effect of hydrogen peroxide, you can prepare a more effective remedy. To do this, you need to mix it, vinegar, boric acid and water in a ratio of 2:2:1:4. You need to moisten a sponge in the resulting solution, and then destroy the black spots of mold on all affected areas. Remaining composition is washed off soap solution, and then - clean water. Soda and vinegar Many people in cooking know the reaction that occurs if baking soda pour in table vinegar. This process can be used to combat black mold in the bathroom, but it will only work on horizontal surfaces. Sprinkle soda powder onto the affected area in a dense layer, then pour it with table vinegar. When the foam settles, its remains must be removed with a sponge soaked in a soap solution. Tea tree oil If mold has appeared recently, it will be much easier to fight it; in particular, you can use tea tree essential oil. To prepare the solution, you need to dilute 1-2 tablespoons of oil in 0.5 liters of water, stir the mixture thoroughly and pour it into a household spray bottle. The resulting product should be sprayed onto all accumulations of fungus and left in this state for 12 hours. Mold on sealant Not everyone knows how to remove mold in the bathroom on sealant, as some products may be too aggressive for it. This mold is no less dangerous than ordinary fungus on tiles, so you need to get rid of it immediately, without waiting for the problem to grow. It can cause diseases of vital organs in people and animals, so it is necessary to take action quickly. To rationally fight against fungus on silicone sealant, it is necessary to determine the extent of the problem. If the problem has appeared recently, it may be enough to simply wash off the mold and treat the area with an antiseptic. If the situation is advanced, more painstaking processing will be required. Must be dissolved in warm water a small amount of detergent, suitable for cleaning the bathroom, then soak a sponge in the mixture and wipe all affected areas. Having thus removed the top layer of mold from the surface of the sealant, you need to wash off the remaining solution with clean water. After this, you need to treat the affected areas with any bleach, “Whiteness” will do, after 10 - 15 minutes you need to rinse off the product and dry the surface. Bleach will not only disinfect the sealant, but also return it to its original shade. In addition, to get rid of fungus on silicone sealant, you can use vinegar, soda or hydrogen peroxide. It is not always possible to get rid of mold the first time; sometimes it appears in the same place again some time after treatment. If you have carried out the procedure several times, but fungus still appears on the silicone sealant, there is only one way out - remove it to find the true source of mold growth. After getting rid of the old sealant with a knife, you need to clean out mold and other debris from the cavities, then wash with soapy water and disinfect with an antiseptic.
If one of your relatives starts complaining about bad feeling, he has constant rheumatic and headaches, skin rashes, accompanied by cough, nausea, then with a high percentage of probability we can assume that this is a consequence of the fact that a house fungus has appeared in your home.
Fungal mold releases spores into the air, which cause illness in your household and suppress the immune system. It is necessary to find the source of the problem as quickly as possible in order to get rid of it. Most often, the fungus settles in the wettest and warmest room of the house - the bathroom.
How to remove fungus in the bathroom? It is necessary to carry out comprehensive measures to get rid of it once and for all, and not temporarily.
Causes of fungus in the bathroom
The bathroom is the most vulnerable spot in any home where the most suitable conditions are created for the existence and proliferation of mold comfortable conditions. If under existing high humidity There is no good ventilation system, but there is no fungus either, then it’s only a matter of time.
This means that you have only recently completed renovations and mold has not yet been able to manifest itself. It can appear on any surface: concrete, stone, plastic, paint. The real disaster is the appearance of fungus in the washing machine.
Disputes in large quantities always present in the house, but they begin to sprout when the right atmosphere is created:
- humidity above 90%;
- air temperature above 20 degrees;
- insufficient ventilation;
- poor waterproofing.
Under such conditions, the fungus in the bathroom begins to intensively penetrate all wet surfaces with the thinnest threads and multiply very quickly. Outwardly, it looks like this: blackening of the seams between the tiles, gray-black spots and small dots on the walls, an unpleasant musty smell.
As a result - untidy appearance such a room, but there is a threat that over time, fungus on the walls in the bathroom will even cause paint and plaster to peel off and damage Decoration Materials, cracks will appear in the concrete, that is, all this will lead to the need to make repairs again.
Sequence for removing fungus in the bathroom
You only need to approach the destruction of the vile destroyer of your home in a comprehensive way. To get rid of fungus in the bathroom, you need to not only remove it, but also make sure that it cannot appear again in the future. Mold removal measures have several stages, only careful implementation of each stage guarantees a high-quality result:
- Improved ventilation. Many people keep the bathroom door open, but this is not enough. We need to put more powerful fan. You should also check the ventilation shaft; it may be clogged and therefore there is no air outflow.
- Throw it away old furniture, since there may also be spores on it, mold in the bathroom can penetrate very deep inside.
- Reducing dampness. Constant condensation on sewer pipes is a result of them being poorly insulated. The shower, faucet, and toilet may leak, so it is very important to get all the plumbing in good working order. A modern heated towel rail and heated floors can also reduce humidity. If washing machine registered in the bathroom, you need to check whether residual water does not accumulate in it after washing.
- Waterproofing works. Waterproof paints exist for different surfaces, so everything in the bathroom should be painted only with such paints, including even front door. But the plaster should also be treated first waterproofing coatings so that moisture does not penetrate.
- Destruction of mold. The most time-consuming part of the process should begin with the fact that you need to try to dry the ceiling and walls, so you need to stock up on a good electric heater. Depending on the extent of the fungus, the bathroom will be treated in various ways; its treatment for mold will be based on folk remedies and with the help of special preparations, available in large quantities in all construction stores.
How to remove fungus in the bathroom if it progresses
First of all, you need to find a specific source, because black fungus in the bathroom must, like all mushrooms, have a mycelium. Blackness is a visible part of the problem, but the source must be destroyed. Most often it is located behind the plaster, so you need to find the voids. We remove the mycelium by normal scraping.
If the seams between the tiles are affected, then all grout that is susceptible to the disease must be removed. A tile that sticks to the wall rather weakly must be removed; you will probably find mold underneath it.
In further processing it is important dry heat. Using a powerful hair dryer, you need to warm up all the cleaned areas. You can use a household heater. The fight against fungus in the bathroom continues with the help of antiseptics, which are used to treat all surfaces.
You must strictly follow the dosage instructions and safety precautions indicated on the packaging. At the end, the bathroom should be thoroughly warmed up again.
How to remove fungus in the bathroom at the initial stage
If you begin to notice the first signs that your bathroom has high humidity and unpleasant black spots appear, then you should immediately sound the alarm. Without fail, we repair the broken ventilation and begin treating the walls.
Newly formed mold in the shower stall should be destroyed immediately and this will be much easier than treating an advanced case. A good housewife always has a remedy for fungus in the bathroom at hand.
We clean the surfaces from mold and treat the affected area with hydrogen peroxide, chlorine bleach or vinegar essence. These tools are available and very helpful. If you have copper sulfate or concentrated bleach, they will give a better effect.
But still, special preparations produced by the chemical industry specifically for such cases will make it possible to remove mold from professional level and will become a wonderful preventive measure to prevent its occurrence in the future.
The arsenal of such products even includes an antifungal spray that treats the air in the bathroom. We must not forget that spores are constantly hovering around, fungus in the shower stall or bathtub is always ready to launch a new attack, so we need to comprehensively fight it.
Fungus in the bathroom can be in the most unexpected places. It is imperative to rinse the shower head with vinegar solution if you have not used it for a long time, so that it does not become a breeding ground for mold. It is necessary to periodically treat all surfaces for preventive maintenance and do not forget about the plumbing. Underneath there may be the most large clusters hated fungi.
These preventive measures must be carried out judiciously. Always protect your hands, nose, and mouth from exposure chemicals and fungal spores. Good owners should always have rubber gloves and a simple gauze bandage. Try to treat the walls of your home without harming yourself. And always be on guard to ensure that the mold problem does not reoccur.
Today we will tackle the bathroom and I will tell you how to get rid of mold in the bathroom. Mold is a real disaster. Once it appears, it is not so easy to get rid of it. Therefore, we will consider the following questions: what is dangerous about mold in the bathroom, the reasons for its appearance in the bathroom, special and folk remedies for getting rid of mold, how to avoid mold.
The bathroom should be the cleanest place in our home, but unfortunately, this is not always the case. It is in the bathroom that black mold can settle - this is a coating formed by microscopic mold fungi. Plaque does not appear immediately, but as a result of prolonged exposure to favorable factors.
Mold prefers high humidity: 60-80%, and constant washing, bathing or showering contribute to this perfectly.
Lack of ventilation promotes mold growth. High humidity is created if the bathroom is not ventilated and there is no fan.
Absence sunlight, ultraviolet radiation does not kill it, and it develops in all dark corners.
The air temperature is also favorable for the development of fungus from 4 to 20 degrees.
This means that the bathroom has all the conditions for fungus to develop. Its appearance can be recognized by its specific musty smell. It appears even before plaque forms.
How to get rid of mold in the bathroom
Mold can affect bathroom walls, ceilings, ceramic tile seams, and sealant. This happens if the situation is very advanced.
Therefore, the sooner you start getting rid of mold in the bathroom, the easier it will be to defeat it.
You won’t be able to simply wash off mold with water; it eats deeply into the surfaces of the bathroom. To combat mold in the bathroom, you can use both special household chemicals and folk remedies.
Household chemicals to combat mold
Method one - use of chlorine-containing liquids - Whiteness
This is the most cheap way combating mold. It is suitable for processing large surfaces of walls and ceilings, but you need to work with rubber gloves, a respirator (the smell is terrible), and use a toothbrush to handle seams.
Pour the whiteness into a container convenient for you, dilute it with water in a ratio of 1:10, and apply it to the surface to be treated; to treat tile seams and sealant, use toothbrush, so you can get into hard to reach places. Let the mixture sit for 5-10 minutes, then rinse off using a sponge or cloth. Don't forget to ventilate the area being treated. The method is quite effective.
Method two - using special tools
From special means I tried the antibacterial agent Anti-mold Baga. Its advantage is that it is already ready for use, it does not need to be diluted with water, convenient packaging, in the form of a spray, also simplifies use
It is important that this product is used not only to prevent the appearance of mold, but to remove it. According to the instructions, Anti-mold must be sprayed onto the surface to be treated, held for several minutes, and then washed off with water. It not only prevents the appearance of bacteria, but also for a long time adds shine to treated surfaces, in particular ceramic tiles.
I treated ceramic tile joints with this product. Treatment with this product reduced the mold and created shine on the ceramic tiles, but did not completely remove the blackness. The price of the product is expensive, it did not live up to my hopes.
Then I had to contact folk remedies combating mold.
Folk remedies for fighting mold in the bathroom
You can fight mold not only with purchased solutions, but also with solutions you prepare yourself. These solutions are not only cheaper than store-bought chemicals, but sometimes also more effective.
I will say a few words about each of them.
Method one - using copper sulfate
Due to toxicity, work only with rubber gloves when using a respirator.
For 10 liters of water, take 100 grams of copper sulfate, mix thoroughly and apply with a special brush to the surfaces to be treated. Details of use are indicated on the packaging.
Method two - using vinegar
Wipe moldy surfaces with vinegar or apply it with a spray bottle. There is no need to dilute vinegar, as black mold is very persistent.
According to experts, vinegar kills mold by 80%. If necessary, the treatment must be repeated.
When using vinegar to combat mold, take care of your safety.
Method three - using tea tree essential oil
Tea tree oil has an antiseptic effect. I believe this is a gentler treatment than bleach or vinegar. It is effective when mold has just appeared.
You need to prepare the following solution: dilute 1 - 2 tablespoons of tea tree in 0.5 liters of water, mix everything thoroughly, pour into a spray bottle, spray into all places where mold accumulates, leave for 12 hours. No need to rinse off.
Method four - using baking soda
Sprinkle a thick layer of baking soda on the moldy areas and fill it with vinegar. When the foam settles, wash it off with warm soapy water.
Method five - using camphor balls
At the first sign of mold, use them by placing them in the bathroom.
Method six is to use a heated solution of water, boric acid, hydrogen peroxide and vinegar.
Let's prepare an invigorating solution: 100 ml. add 50 ml of water. vinegar and 50 ml. hydrogen peroxide, 25 ml. boric acid. Let's heat it to a temperature of 50 - 70 degrees. We apply the heated solution to the seams damaged by mold, you will see its effect immediately. After 15 minutes, the seams will be soaked, then they need to be wiped with an old toothbrush.
In my case it was the most effective method getting rid of mold in the bathroom.
If the proposed methods of combating mold are deep cleaning could not, which means that mold colonies have spread very far in the grouting, and it is necessary to resort to drastic measures - mechanical cleaning of the joints and removal of old silicone sealant.
To get rid of mold in the bathroom forever, let's start with mechanical cleaning tile seams. You can do this yourself or invite specialists.
Use a special knife or screwdriver to clean all seams damaged by mold; it is better to completely remove the grout. It's labor-intensive, but effective. Remember that there should not be even a millimeter of damaged grout, otherwise the colony will multiply again.
After removing the grout, treat the seams with acetic acid, after 10 minutes, rinse with water and dry with a dry cloth.
With help rubber spatula apply new grout. Wipe the tile along the seam with a dry cloth and remove excess. Now your bath is safe from mold. However, mold may reappear.
How to prevent mold from growing again
Must be observed the following measures prevention aimed at reducing high humidity in the bathroom and eliminating fungus:
- Ensure good ventilation of the bathroom by installing good fan in the hood, and be sure to ventilate the room after washing and taking a bath or shower;
- After taking a shower, do not forget to wipe the tiles with a cloth to remove any remaining moisture;
- Do not dry clothes in the bathroom; use the additional area of the loggia or balcony for this;
- Timely and mold;
- Regularly cleaning the bathtub from dirt is the key to health;
- When moving to new apartment or carrying out overhaul treat the walls with an antifungal agent and only then lay the tiles;
- Keep an eye on the glass with toothbrushes; if the water stagnates there, mold may appear in the bathroom;
- Make sure that water does not drip from the taps, this is also a source of increased humidity in the bathroom and unnecessary costs
Compliance simple rules prevention will help you avoid mold in your bathroom.
Remember that black mold in the bathroom is not only an aesthetic problem, but also a threat to your health.
Watch the video - why black mold is dangerous and how to destroy it.
I hope that you now know how to get rid of mold in the bathroom, and the health of your loved ones is not in danger.
Sincerely, Nadezhda Karacheva
