≡× MENU

• Repair
• Repair
• Interior Design
• About everything
• About plumbing

Replacement of glass in interior doors. Estet company overview: ideal door designs in the catalog and in the photo. How to replace glass in an interior door

The most fragile element in the entire interior of the house is glass, especially if it is an integral part of modern interior doors. The repair associated with its replacement is not particularly difficult, but requires some knowledge. Change such a broken element with your own with my own hands everyone can, given the recommendations of experts.

Interroom modern have a beautiful appearance. But if the glass element of their decor is broken, you should know how to properly replace it without involving specialists. So, how to change it with your own hands and what you need to consider in this case, we will consider further.

In general, replacing glass on doors is not particularly difficult, but only if some nuances and tips from experienced craftsmen. After all, one wrong move, and your work will be reduced to nothing.

Modern production provides the market with a wide variety of glass doors

Types of glass used for doors

Before embarking on such a responsible issue as replacing broken glass, it is worth exploring the most profitable options that modern industry provides us with in the manufacture of interior doors today:

• Decorative glass. This type of glass not only fits beautifully into any interior, but also makes it richer and more luxurious. But when replacing a broken element, you may encounter one problem - to choose the right glass inserts with a similar pattern, similar to those on other doors in the apartment. That is why, broken glass in one case may entail the replacement of all paintings in the apartment. And this is a rather expensive option, because the cost of 1 sq.m. decorative glass - from a thousand rubles.
• Ordinary glass. Ideal alternative to decorative glass, but requires additional processing. Ordinary glass is treated with special decorative films that give it an expensive look. Replacing such glass is several times cheaper than the first option.

Ordinary glass: the cheapest replacement option

• Plexiglas. Unlike the two previous options, this type of interior door glazing is not fragile, but is subject to scratches, as a result of which it begins to become cloudy and takes on an ugly appearance. It can also be pasted over with a decorative film, which will not only give the material a more beautiful appearance, but also protect it from scratches.

Attention! The most expensive option is decorative glass. Its replacement is a rather expensive option, because the cost of 1 sq.m. decorative glass - from a thousand rubles.

A simple option for replacing glass on interior doors

Regardless of what type of glass is installed in the interior doors, if necessary, it will need to be replaced with a new one. The simplest option is to install using glazing beads or, as the people say, quarters, although this is not entirely correct. If you have just such an option in front of you, then it will be quite simple to cope with the replacement of glass:

1. Using a chisel, pull off the glazing beads.
2. When the nails show, use pliers to remove the elements one by one, while supporting the broken glass.
3. Measure the parameters and go to the glass workshop.
4. Install the purchased decor and secure it with glazing beads.
5. If we are talking about ordinary glass, then before installation in place, it should be pasted over with a decorative film.

Fastening glass in the door with glazing beads

The solution to the problem is simple and everyone can cope with this, with their own on their own without involving specialists.

Advice. Beads must be removed very carefully so as not to damage the nails door leaf.

Difficult option to replace broken glass on doors

There is an option for making doors that visually look like one complete canvas, which consists of wood and glass. Beadings, in this case missing. Therefore, the replacement of glass takes place according to a different scheme - here you will have to disassemble the door into “boards”. How to properly replace glass on such structures:

1. Carefully inspect the design of the doors. Under the plugs there should be fasteners - confirmants or self-tapping screws.
2. Remove the canvas and place it on the floor.
3. Remove the plugs and unscrew the fasteners on one side.
4. Remove the sidewall of the canvas and remove the broken glass.
5. Install new glass and assemble door in reverse order.

Advice. To avoid glass rattling after installation, experts recommend lubricating its edges before installation. soapy water.

Replacing glass, which is not fastened with glazing beads, but is part of a solid door leaf, is a much more laborious process

Regardless of the method of installing glass in interior doors and the type of glass, the procedure for replacing it must be approached with responsibility. The slightest wrong move can lead not only to incorrect installation, but also damage the door leaf itself.

Video: Replacing broken glass on an interior door

There are many on the market today various models door cloths. Designs supplemented with glass inserts are especially popular and in demand. However, there are times when the glass in the door needs to be replaced. Most often this is due to poor product quality or careless handling of the sash.

Peculiarities

Nowadays, consumers are completely unlimited in choice. finishing materials, decor, furniture and door panels for your home. A door suitable in style and shade can be purchased for any interior, whether it is a popular timeless classic or artsy baroque.

Currently, in many dwellings you can meet beautiful and elegant doors with a glass insert. She may have the most different sizes. So, in stores you can find designs in which glass occupies almost the entire door leaf or specimens with glass inserts made in the form of narrow stripes. Both of these options look attractive and stylish in their respective environments.

Often beautiful, but fragile inserts in them are broken, even with fairly careful handling. This can lead to very backfire. For example, someone from the household may be seriously injured by fragments of a glass insert.

Of course, the destruction of glass in the door leaf can occur not only because of low-quality raw materials. With careless handling of such structures, fragile inserts in them can also break. So, it is not recommended to slam such doors sharply, as this most often leads to disastrous consequences.

You should be especially careful with canvases with glass inserts if small children and pets live in a house or apartment.

Often they, having played too much, slam doors sharply or throw something that can fall directly into the glass. This can lead to a very unpleasant outcome in the form of serious wounds.

Often the glass in the door still breaks or cracks and needs to be replaced. You can do this job on your own. The main thing is to competently and seriously approach this issue and stock up on all necessary tools and materials.

Glass types

There are several types of glass that are installed in door leafs.

• stained glass. These glasses are the most expensive. Replacing such inserts is more difficult, since without it the interior may seem completely different and faded.
• Normal. Classic glass surfaces can be supplemented with a special sticker in the form of a decorative film. Ordinary glasses are transparent and matte.
• Plexiglas. This material is not afraid of impacts and is more wear-resistant. It looks more like plastic, which is also often finished with a decorative film.

How to change?

Before the direct replacement of the damaged part, it is necessary to free the door from it.

First you need to remove the door from the hinges (for more convenient operation) and get some accessories.

• Tough gloves for cut protection.
• Slotted wide screwdriver. With this tool you can pry wooden architraves holding the glass in the door. If your canvas is paneled (collapsible), then a screwdriver may not be useful at all.
• Chisel. You can’t do without this tool when working with such material as wood.

• Small hammer. A hammer will be needed in the work of fixing the glazing beads with small finishing nails. If you are working with a paneled model, it is better to buy a special rubber mallet to lightly drive in the panels during assembly.
• Office knife. Such a knife will be needed to remove the old sealant at the installation site of the new glass.
• Rubberized insert or sealant. Special seals not only ensure high-quality shrinkage of the fragile insert, but also prevent rattling during operation of the door leaf. A loose design can also rattle during use.
• Building paper bag , cardboard box or segment thick paper. Paper will be needed in order to carefully and safely wrap and remove the fragments left from the previous glass insert.

To install glazed interior doors, the following designs are used.

• Shield. These are products where glass is attached using special glazing beads by lining.
• With slots for insertion on one side (they are royal). These are models in which the glass is installed in the cavity of the door leaf.
• Paneled. In these models, the glass is inserted into the grooves.

Paneled

In order to repair paneled canvases, they must be almost completely disassembled into different parts. Many people are frightened by the large number of details that make up such a door, but do not panic.

The design can not be disassembled, but just open access to the glass.

To do this, you need to know the design of such a door.

• support in vertical position– side pillars of the door;
• Cross support - holds the longitudinal parts and glass;
• Panels - thin components of the inserts located between the transverse elements;
• The framing part is the same transverse support, but it performs the function of a decorative insert.

Many paneled doors are made according to the tenon-groove principle. They are very easy and simple to understand. Faced with such options, you do not have to clean the necessary areas from the old sealant. After removing the damaged insert, new glass is installed in the same place, and the door is assembled in the reverse order, after which it can be installed in its original place in the apartment.

After removing old and damaged glass, it is necessary to immediately remove the fragments and any little things left from them. This is necessary in order to protect yourself and other household members from serious injury.

Tsargovye

To replace the glass in the king door, it is also removed from the hinges and placed on flat surface. After that, using a ruler and a chisel, you need to remove all the plugs located along the edges of the base. Using a screwdriver, remove all fasteners. Now you need to take a small hammer and a bar and use them to separate the drawer over the entire surface of the canvas. You need to do this from the bottom up.

After removing the drawer, it is necessary to remove the old glass from the grooves along with silicone (of course, wearing gloves). At the end, you can safely install a new glass sheet of a suitable size in the grooves, place the drawer back in its original place, assemble the structure and install it on the hinges in the opening.

Shield

As a rule, glass in such traditional canvases is installed on the sash using glazing beads (wood fasteners). For work on replacing the insert, it is better to purchase new parts, since the old ones can easily be damaged at the time of installation or dismantling of the glass.

First you need to lightly knock out the glazing beads with a screwdriver and a small hammer. It is necessary to loosen the insert a little, but do not remove the fasteners. Then you should remove the glazing beads located at the top (only if the canvas is removed from the hinges).

After that, the remnants of the old glass are removed. Do not forget about removing the old sealing compound from the door leaf.

A new glass insert in such products is installed in the gap, pre-treated with a sealant. If necessary, a glass seal can be used. Beads are installed on top.

You can fix the parts that hold the glass in the shield base using small nails or smearing with a silicone compound.

What can be glued?

If the glass in the door did not break or crack, but began to stagger, making unpleasant noises, then you can act in different ways.

• Purchase a specialized "sanitary sealant" and apply it in a thin strip into the gaps between the glass and the wooden sheet;
• Insert regular matches into corners glass part. Also suitable for this acrylic putty, which must be applied to the edges of the glass;
• Small pieces of cork can be well smeared universal glue and insert into the slots along the perimeter of the glass insert;
• Remove the glazing beads, apply sealant to the glass and install them again, but closer to the panel.

These simple works will solve the problem when the glass in the door leaf staggers and dangles. The main thing is to carry out all actions as carefully as possible.

How to hide a small crack?

If the glass is interior door cracked, then its repair and restoration decorative features can be done in the following way.

• Paste a special adhesive composition for glass furniture;
• Glue the damaged part epoxy glue;
• Apply moldings to cracks if they are located along the edges of the insert;
• Decorate with various films that will cover the damage;
• Hide stained glass films.

You should consider in more detail one of the most common options for restoring cracked glass in an interior door with your own hands.

• First you need to stock up on silicone glue, a brush, a syringe and acetone, as well as detergent and clear varnish
• Next, you need to carefully prepare the glass insert and wash it thoroughly with a glass cleaner and warm water. Inserts need to be washed on both sides;

• After they are completely dry, you need to degrease the area where the crack is located. To do this, take a cotton swab and soak it well in acetone. Glue will be applied to a degreased surface much better, and the service life of glass restored in this way will be much longer;
• It is also permissible to treat cracks with cotton swabs. However, when using such a device, you should pay attention to whether it leaves behind fibers on the damaged area of ​​\u200b\u200bthe glass;
• After careful and accurate processing of the damage, it is necessary to start sealing the crack.

• To do this, you need to draw silicone glue into a syringe (of course, without a needle) and fill the crack with it as carefully as possible. Don't rush into doing this. It should be done slowly and confidently so that the composition is evenly distributed over the damaged area.
• Today in stores building materials you can find tubes of glue equipped with very convenient nozzles with tips that help squeeze out larger portions.

• If the damage on the glass is large enough, then after applying the glue it is worth sealing it on both sides with ordinary transparent tape. The completed work should be left for 12 hours until completely dry.
• At the end of this work, you need to cover the surface of the crack with a colorless varnish. To do this, take a thin brush, dip it in the composition and draw over the gluing area. After that, you must wait for the complete drying of the applied varnish, and the work will be completed.

Successful examples and options

Doors with glass look organically in many interiors, and it does not matter at all whether stained glass or ordinary inserts are present in them. The main thing is to choose a design suitable style and colors.

Several organic and stylish ensembles should be considered, in which there are elegant doors with glass inserts.

• A fashionable black tsargovaya door with transparent glass inserts will effectively stand out against the background of snow-white walls and a glossy milky floor. Next to such a detail, you can put a small light chair and a metal floor lamp with a bell shade.
• The design of a dense chocolate shade with a thin glass line in the middle can be installed in a white room with accent wall, close in shade to the door leaf. The floor in such an environment should also be finished with white materials and furniture in snow-white and coffee tones should be placed in it.
• A luxurious dark chocolate colored door with a long black glass insert will look perfect in a white room with a gray floor finished with glossy tiles. Reinforce the dark canvas wall shelves similar color and wooden table, simulating weak processing.

Doors with glass inserts of various configurations and sizes are not an invention of today or even yesterday. Previously, it was called door stained-glass windows and they were placed not only for beauty and grace. In some houses and other residential and non-residential premises, such doors also carried a certain semantic load. They depicted coats of arms, some landscapes and religious symbols. Nowadays, this moment is rarely observed anywhere, but other functions have appeared.

Visual increase in space, better lighting, maintenance general style premises and so on. But the inserts have changed little in their physical qualities, and sometimes it becomes necessary to replace the glass in the door. Calling a specialist glazier is, of course, easier, but doing it yourself is not so difficult.

The answer to this question suggests itself, and it is quite natural. Other same glass. Logical, isn't it? But sometimes it happens that glass that is suitable in size, pattern or color cannot be obtained within a short period of time, and it is simply necessary to replace the broken glass in the interior door. Leaving it in place, firstly, is ugly, and, secondly, it is traumatic. Especially if there are small children in the house who constantly forget the most important instructions of their parents and can get hurt. And therefore, you will have to look for a replacement, and neither pride nor aesthetic education allows leaving a hole in the door.

The easiest option is to insert a neatly sawn piece of plywood or fiberboard. They can even be somewhat ennobled by pasting over with some exquisite pattern. Or get the same kids to paint it in the style of the early impressionists. Just do not forget that this is a temporary option and it is still necessary to look for, and then insert a suitable glass.

Getting ready for work

Any Homework associated with the repair of some mechanism, household appliance or an interior door, it begins with the fact that the person who is going to make this repair selects the best set of tools for himself. To fix the iron, you will probably need a soldering iron. To paste wallpaper, you need a roller, scissors and an assistant. To hang a shelf in the bathroom, you get a drill, dowels and exact instructions from your wife where exactly to hang the shelf.

In order to replace the broken glass in the door you will need:

• Gloves.
• Wide screwdriver.
• Hammer.
• Chisel.
• Sharp knife.
• Roulette or centimeter.
• Sealant, rubberized gasket or glazing bead.

And the last action, before replacing the glass in the interior door, is to remove the door itself from the hinges and lay it so that it is convenient. Of course, you can carry out this operation right on the spot, but it will be more convenient, and remove modern doors- it's a matter of a few seconds, you don't even need an assistant. Just open the door, lift it up and that's it.

Just make sure that fragments from a damaged insert do not fall out and injure you.

Glass replacement step by step

So everything preparatory work carried out. The right tool at arm's length. No one is running around or standing over their shoulder. Getting Started:

• We remove the damaged glass and all the fragments. This is where gloves are needed. The chips are probably sharp and it is quite possible to get hurt about them, pulling them out with bare hands.
• Remove the bead or gasket.
• We clean from putty or sealant.
• It will not be superfluous to go around the entire perimeter with sandpaper.
• We make measurements. In this case, it must be taken into account that the glass insert itself must be installed without the slightest effort. Therefore, both the length and width are calculated in such a way that they are a few millimeters smaller.
• According to the obtained dimensions, we order glass from a glazier or cut it out ourselves.

On this, the process of removing the glass insert, which for some reason broke or became unusable, can be considered complete. It's time to bring the door back to its original state.

• Around the entire perimeter closer to one edge, it is necessary to apply a layer of silicone sealant.
• A brand new glass insert is fixed with a gasket.
• On the other side of the glass, a layer of silicone sealant is applied again.
• We fix the insert with glazing beads and leave it for some time, necessary for the sealant to harden.
• Gently shake the door, checking that the glass insert does not rattle. Otherwise, we seal the junction with another layer of sealant.
• If everything is done qualitatively and there are no side effects, you can safely hang the door in its rightful place.

It remains only to check that the door, updated with a new glass insert, rotates on hinges as freely as before and carefully clean up after itself workplace on which fragments of glass could remain invisible to the eye. Sometimes even long work powerful vacuum cleaner can not collect them all. In this case, it is worth using a little trick that everyone used in childhood while sculpting figures from plasticine. Knead a medium-sized piece of this elastic substance in your hands and walk it all over working area. Even the tiniest fragments will not hide from plasticine, and the heels of all your household will be safe.

Paneled door

With paneled doors, everything is both more complicated and easier at the same time. More difficult because you have to disassemble almost the entire door in parts. Easier, because there is nothing difficult about it.

We also remove the door from the hinges. Lay it horizontally. We find special plugs that close the fasteners. Carefully remove them and unscrew the fasteners until access to the damaged element is opened. We delete it. We insert the same one in its place and do everything in the reverse order.

Slotted door

There is another configuration of interior doors in which you can change the damaged glass yourself. This is a door with special grooves in the end, through which, without any difficulty, you can remove a broken insert or its fragments and insert a new glass matched in size and color through the same groove.

Here, too, there is a little secret on how to do this operation faster and easier. If the new glass, which was selected with great care, and should simply fly into place with a whistle, does not want to be inserted there, you just need to slightly grease its edges with soapy water. After that, the sliding of the glass in the groove will become much smoother and easier.

Repair in the apartment can be of various kinds. Planned capital. Temporary, necessary only until the moment when more are acquired quality materials. And urgent, postponing which even for a few days means endangering your loved ones. Broken or cracked glass in an interior door is the last option. Don't hesitate to replace it. Yes, and for what? To gain the necessary knowledge? They are not required. This work is no more difficult than others that you do around the house. But even if there are any doubts, it doesn’t cost anything to just sit down and think for a few minutes how to do it quickly, simply and efficiently.

Sections of the article:

Interior doors equipped with glass inserts look great and delight the eye of their owner. Such door structures fill the room with light. However, glass is glass, and even today's strong glass breaks sometimes. At the same time, you should not be very upset - inserting glass into an interior door is quite simple.

Glass types

Before considering the procedure for replacing the glass insert in the door leaf, it is worthwhile to study the materials that can be used to perform these works. After all, there are many options that can replace the "classic" glass.

Decorative glass as an insert in the door is one of the most expensive options. Not all door manufacturers use similar glass sheets in their products. In general, this great option, which does not require any additional improvements - the main thing is to find it on sale with the same type of decor or pattern as on the other doors in the apartment or house, which can be very challenging task. Often, if the glass on one door is damaged, this entails the need to replace glass inserts on all canvases, which can be very expensive, because the price of such glass starts from 1,500 rubles per square meter.

Ordinary glass is a good and, most importantly, more affordable alternative to expensive decorative glass. However, this material requires a slight refinement, which is pasting with a special decorative film. You can buy them at construction markets or in hypermarkets - a wide selection will allow you to find a film for every taste and color. As a result, this option will cost two times cheaper than decorative glass.

Also available as a replacement monolithic polycarbonate(plexiglass). Any glass, whether ordinary or decorative, is glass with all its attributes. With careless operation, such inserts can break, which cannot happen with plexiglass. It is nothing but transparent plastic. There is only one drawback and it is insignificant - plexiglass is highly susceptible to scratches and eventually loses its transparency. As in the case of ordinary glass, a slight refinement is also possible here using the same film.

Rectangular glass replacement

Replace glass with traditional rectangular shape in an ordinary door leaf is easy. Often, a glass sheet or insert is mounted through the upper end.

So, the first step is to remove the pieces of old glass from the door. Then measurements are taken of the space in which the new glass sheet will be installed. After that, glass of suitable dimensions and thickness is purchased. Then it is very carefully inserted through the top of the door leaf. To strengthen the insert, you can apply silicone gel - it is applied around the perimeter glass element.

When taking measurements, it is necessary to take into account the depth of the groove where part of the glass goes. Its value must be added to the overall dimensions of the glass sheet. To measure it, lower a metal ruler into the groove.

If the glass is held on the door leaf with the help of the so-called "glazing beads", then both measurements and installation work are performed in the same order, except that the glazing bead must first be dismantled. Then, after installing the glass, it is installed back with small nails.

Premium door glass replacement

If everything is simple with more affordable models of interior doors, then some difficulties may arise with premium models. Such doors require a special approach. The replacement process is very labor intensive. Often, the canvas has a collapsible design, and in order to dismantle a glass insert that is broken or damaged in any other way, you will have to completely disassemble the entire door, then replace the insert and assemble everything back. Usually this work is trusted only by specialists, but you can do the replacement yourself. To do this, you need to know how this or that door model is disassembled.

If the door leaf is not made of wood, but of metal (for example, aluminum), then there are also certain nuances here. In the event that glass is inserted in the same way as on inexpensive doors or glazing beads are used for fastening, then its replacement is quite possible. But it is very undesirable to allow direct contact of the metal of the door with the glass. When mounting, it is best to use a rubber lining.

How to replace non-standard glass

Glass in modern interior doors can be made in a unique design style. The shape of the insert can be very different - it will be better if the glass is oval and much worse if it is made in the shape of a wave.

If the glass is inserted into the canvas through the top, then the first step is to remove the fragments of the broken glass insert. Then, using a felt-tip pen or marker, the resulting hole is outlined along the contour on paper or cardboard. After that, you need to order a new glass of the required shape in the workshop, after which you just have to insert it into place.

Features of working with panel structures

Paneled doors are very popular. Replacing glass is associated with the need to disassemble the structure. Often, these door panels are easy to disassemble. The glass in them is a panel. The canvas can consist of a vertical and transverse support, glass between them, as well as a baguette - this is a kind of decorative element.

Connections are based on castle system- on most models, this is a “thorn groove”. Take the door apart constituent elements completely unnecessary - the main thing is to open access to the glass. Then, everything that remains of the damaged glass is taken out of the door structure, and a new one is installed in its place, after which it remains only to assemble the structure back.

Sliding door glass replacement

Doors equipped with glass can be not only hinged - there are many designs and sliding solutions among them. If glass breaks in such an interior door, the first step is to dismantle the canvas, and in order to get to the glass, it is necessary to remove the metal frame-frame of the door. Due to the large dimensions, this can cause certain difficulties.

Decor

For creative people who like to improve something, make the world around them and other people a better place, the usual process of replacing glass can be turned into creative work. For example, you can get interesting effect if the new glass is illuminated from the inside. How to do it? Everything is very simple - in the groove where the glass is inserted or in its end, they install led strip. After that, the system is connected to the electrical network. It is also possible to equip the door leaf with a microswitch so that the tape only lights up when the door is closed. Such decor gives a very wide scope for imagination and creativity, and the result can be very interesting and unique.

Replacing glass in an interior door is not considered a particularly difficult task, but it must be done accurately and accurately. A fragile insert requires skills in handling the material and appropriate tools, so it is better to order cutting from specialists. Trade construction organizations provide such services directly upon purchase. glass decor.

Glass inserts are most often changed for the following reasons:

1. Broken glass must be removed, even if it did not fall out. A sudden movement when closing the curtain will lead to possible injury to people.
2. Aging decorative inserts reflects on their appearance and also often leads to replacement.
3. Installing glass doors in your living room is an easy way to freshen up your interior. The repair option includes only the replacement of glass in the canvas or changing the size of the frame.
4. The glass insert may be accidentally soiled or scratched. You can replace the glass if it's easier than putting it in order.

preliminary stage

To repair a damaged door with a glass panel, it is necessary to carry out preparatory work. Before installing a new insert:

• remove protruding fragments from the frame (most often they can be easily removed by applying little effort);
• remove the canvas from the hinges and lay it on a flat surface;
• inspect the door and try to determine how the insert is mounted;
• if the glass is not broken, then dismantle it.

In old apartments, glass was inserted into the door frame using putty. To repair interior doors and replace broken glass, you need to pry off the glazing bead holding the insert with a knife or screwdriver. After that, pull out the nails with pliers, remove the glass part and clean the opening from the remnants of paint and putty.

To work, you need to prepare tools:

1. glass cutter;
2. hammer;
3. small nails;
4. silicone sealant.

It is often necessary to replace the glazing beads. You can buy them at the hardware store, in the lumber department.

Kinds

Doors are glazed with different types material:

• transparent - often complemented by pasting with decorative films with drawings imitating stained glass;
• matte - rarely requires additional finishing;
• with a pattern, corrugated and stained glass - are decorative species glass, it is better to entrust their cutting to specialists;
• tinted or mirrored.

• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  

Material selection

Frosted or corrugated glass is used where the view of the room from the outside is undesirable: in the bathroom, bathroom, bedroom. These types of material are thicker than transparent window glass: it reaches 4-6 mm. Home master not always be able to cope with cutting on their own. Therefore, after dismantling the old glass, it is recommended to measure the opening for insertion and order a replacement in the workshop construction company.

For the living room, decorative glass for doors is more often selected: with an engraved pattern made using sophisticated technology and surface treatment with a sandblasting unit, stained glass, consisting of colored pieces connected together. If desired, you can use both corrugated and frosted glass if the interior design is not particularly luxurious or is made in a minimalist style.

Both transparent and any other can be installed in the kitchen. A budget option- a simple window pane pasted over with a film, or decorative curtains on a glazed structure.

Options to replace

If it is not possible to quickly insert decorative glass into the door instead of the broken one, there is an option to replace it with other materials. For temporary insertion, you can use:

1. plywood or fiberboard, pasted over with a film that fits the veneered surface of the canvas;
2. plexiglass (monolithic polycarbonate);
3. window glass with stained glass film.

These materials are not the most successful decor for the door, so in the future you will again have to make repairs and insert new glass into the opening.

How to replace glass in an interior door

In economy class doors, the insert is removed and installed from above, through a special groove. Silicone sealant serves as a sealant: do not forget to clean the frame well from its remnants. Before replacing the glass part, you need to find out its dimensions.

Glass in inexpensive models has a rectangular shape, so it is enough to determine the dimensions of the glass opening in terms of width and length. When taking measurements, it is important not to forget about the allowances that are needed to fasten the insert in the grooves. Measuring the allowance is simple: slide the ruler into the groove. Add the resulting value to the length and width of the opening.

It is advisable to cut the glass as precisely as possible so that it easily fits into the mounting gaps. Before installing the glass in the interior door, fill the grooves with sealant.

doors more complex design to replace the glass will have to be disassembled. To do this, you need to find bolts on the sides, closed with special decorative plugs. By unscrewing the bolts, you can remove part of the canvas and remove the insert. Measurements to be made taking into account allowances.

Inserting glass into a kitchen door with a panel, the master must find the dowels in the upper and lower parts of the canvas. They need to be removed and 1 side of the frame removed. Pull the glass panel out of the groove, take measurements and cut out a replacement part. Assemble the structure in reverse order. Put the dowels on the glue.

How to insert rectangular glass

Rectangular inserts can also be found in interior or kitchen doors old apartments, and in expensive products in new buildings. Inserting glass into an old-style door is easy:

• after dismantling the glazing bead and cleaning the recesses, measure the opening taking into account the groove;
• cut a rectangle to size and insert it into the opening, applying a little sealant there;
• install the glazing bead in place and secure with nails.

Inexpensive plastic, laminated and veneered products come with inserts on fasteners with glazing beads. In such a case, the repair is carried out as indicated for the old-style doors, removing the strips along the perimeter of the opening on only one side of the door. It is advisable to keep the nails that fasten the bead and use it when installing the planks in place. To prevent rattling of the newly inserted glass, before the procedure, silicone sealant should be applied to the recess between the blade and the slats.

Options for doors of complex design sometimes include non-removable fasteners: a groove with hidden wedges. Such a product will have to be taken to the workshop for a branded replacement: it is impossible to do it yourself. According to user reviews, repairing a complex structure with hidden fixation is more expensive than buying another door, so it makes sense to ask a sales assistant for details in advance.

Installation of non-standard forms yourself

Manufacturers produce unusual models doors with glass of complex shape. They are beautiful, but their repair will not do without the help of a specialist. Do-it-yourself replacement of glass in an interior door should be started by inspecting the fastening of the insert: if it is too complicated, then you should immediately call the master to the house. But if there are removable elements, as a rule, you can replace the insert yourself:

1. Remove the door from its hinges and place it on a sheet of cardboard. Its size should be sufficient to completely close the opening.
2. Outline the opening as accurately as possible, do not forget to allow for installation allowances.
3. The template must be cut and tried on in the opening. It must fit exactly the size of the frame.
4. A template for glasses of complex shape must be taken to the cutting workshop.
5. It remains to invest finished parts into the grooves, smeared with sealant, and secure with decorative overlays.

in sliding structures

A sliding door can consist of a large glass sheet and a thin frame around the perimeter or look like a swing door: with inserts in wood or plastic panel. In any case, the canvas must be removed from the awnings and laid on the floor. An assistant is required to remove a heavy object from the profile grooves to slide the sashes.

If the door consists of a frame and glass, then you will need to disassemble it completely. Bolts can be found on the edge of the framing structure and removed. The edge of the glass is protected by a silicone seal, which must be removed and stored if not damaged. If the integrity of the material is violated, it is ordered together with glass door.

Take measurements along the length and width of the canvas. It does not shatter into fragments, but only becomes covered with cracks, so it is easy to cope with the task. When ordering glass in a workshop, you need to specify that a material with protective film(or triplex, as for car windows). After receiving the ordered product, it remains to insert it into the frame, after putting the seal on the edges. When mounting, cut off the silicone tape so that it is 5 mm less glass from each side.

When installing a glass element between MDF panels the canvas is collected on a horizontal surface. To install glass, linings are most often used, which are attached to nails. When mounting the insert and driving small fasteners into wooden door you need to be careful not to break the glass: one wrong move will lead to re-repair. Raise the assembled web and install it in the profile skids for sliding door.