How to paint walls with facade paint. Painting the facade of the house: step by step instructions. Exquisite red façade
Painting the facade of the house is still a popular service, despite the massive distribution of plastic and steel facades. Paint helps to emphasize the beauty of external walls, to realize non-standard design ideas.
Why paint the facade at all?
The layer of paint does decorative and protective functions. The process helps to emphasize individual architectural elements gives the building a finished look. The protective function is no less important, since the facade is constantly subjected to intense loads. It is affected by wind and moisture, snow, rain, solar ultraviolet and much more. If you do not take care to prevent destruction, the facade will soon lose its attractive appearance and will not be able to protect the comfort of residents.
How is painting done
At first glance, the process seems simple, but in fact it hides a huge number of nuances. Independent work possible, but only if you have experience in painting large objects. Otherwise, it is recommended to contact specialists. This will save you a lot of time and effort.
The process includes several steps
Preparation
It is carried out before the start of work and consists of two stages:
Firstly, you need to assess the condition of the outer walls. Find out what they are made of. The most common materials are brick, concrete, gas blocks, cinder concrete, but more exotic options are also possible. Some of them need pretreatment and extra insulation.
If your house is built of wood, conventional painting techniques do not apply to it. You need to use a special varnish and special technologies.
Other materials are often covered with plaster. If this is the case in your case, additional processing not required - you can use the same methods.
Second phase preparation - the choice of materials for staining. Here it is recommended to contact the experts who will tell you what is best to choose. It is not recommended to make a choice on your own if you do not have experience in such matters! This may lead to serious problems in future.
Before starting work, the walls are cleaned. Everything that can interfere with the process is removed from the surface: dust, dirt, a layer old paint. If there are cracks or other defects, repair them. This is important because several thin layers of paint are applied to the wall in the process. If the surface is not as level as possible, the paint will not lay down well and ruin the appearance of the building.
Padding
This stage also includes two stages:
Firstly, the wall during operation is covered with a layer of fat, which interferes with the normal adhesion of the paint. This layer must be removed with special impregnations.
Secondly, a primer is applied to the wall, which will ensure optimal adhesion of the paint to the wall. The choice of primer depends on the characteristics of the walls. If the house is old, use series with deep penetration.
Painting
Only upon completion of previous work, you can begin direct painting. For this, apply different instruments. Choose them according to own experience and preferences. For example, the brush is the most affordable option which is suitable for beginners. The roller and spray gun require certain skills, but help to cope with the task much faster.
In any case, you will need to buy a brush, because without it you cannot paint hard-to-reach places.
“If you are not confident in your abilities, then turn to professionals!” — © Team site
How to choose paint
The coloring matter must meet not only your requirements for aesthetics, but also the climatic features of the region. It is necessary to take into account all external factors, from the strength of the wind to the level of humidity.
The walls of the house need to be painted facade paint, none of the others will fit. In no case do not try to paint the facade with nitro enamel, pentaphthalic or oil paint- They won't hold up well.
In some cases, you can save time, effort and money by purchasing a comprehensive system for cleaning, priming, painting and protecting the finished layer. Everything you need is already included. However, remember that if you bought the appropriate complex, use only components from it. No need to take a cleaning compound from one set, and paint from another.
Many homeowners want to save money and buy the cheapest paint possible. It is not recommended to do so. The cheaper the substance, the less resistant it is to wear. Bad paint will quickly fade in the sun and wash off in the rain. We'll have to spend money again on updating the layer. Choose only weatherproof paints.
Attention! If the facade has been painted before, buy the same type of paint.
Keep in mind - you will need scaffolding:
Access to remote sections of the walls is possible only during the construction scaffolding. Don't try to get by ladder- It is suitable only for processing small areas.
For the construction of scaffolding, you can use improvised materials - wood or steel pipes. You can also buy quick scaffolding or tower tour.
If you need to paint cottage, it is not necessary to build scaffolding - enough scaffolding and a roller on a long handle (difficulties may arise with processing parts of the house under the roof overhang).
How are exterior walls primed?
After the walls are cleaned of dust and dirt, after eliminating all cracks and other defects, you need to treat them with a primer. It will not only ensure optimal adhesion of the paint to the surface, but also prevent negative impact microbes, fungus and mold.
The primer must be applied to the entire surface of the wall - including those parts that have been treated with putty to seal cracks and other defects (after the putty has dried). The work is carried out in accordance with the instructions. The primer is applied with a brush, as it provides the most thorough application, and the substance penetrates deep into the surface structure.
If the building is located in a region with difficult climatic conditions(e.g. constantly high humidity), it is recommended to apply several coats of primer. The second is applied after the first is completely dry. Detailed information read the instructions.
What to do right before painting
When the process is almost complete, several additional procedures should be carried out.
- Places that you do not intend to paint, or plan to treat with a different color, are best covered with masking tape or plain paper. This will help prevent accidental ink spills.
- Protect windows as some types of paint are difficult to remove from glass. Polyethylene or plywood is used as a protective element. If nothing like this is at hand, you can simply cover the window with a newspaper.
How to paint with multiple colors
Upon completion of all preparatory work you can start painting. The process becomes a little more complicated if you intend to treat the wall with several colors (for example, create a border around windows and doors). It is recommended to pre-paint small items brush, and only then proceed to the main part of the process.
Maximum edge definition can be achieved with masking tape, but it is not necessary to use it. Even if you accidentally get on the main surface, then it can be covered with a layer of facade paint.
Why is it recommended to process small elements first and only then proceed to large ones? It's all about possible mistakes, because small streaks are much easier to fix - they are wiped off almost without difficulty. After completing the first stage of painting, you need to properly wash the brush, as soon you will need it again.
Wait for the paint to dry decorative elements. Now you can start the main part of the work. It is recommended to cover already painted parts of the building with masking tape. It will not only prevent the appearance of streaks, but will also help to achieve maximum clarity of the border between different colors.
What tools should be used
Painting tools The most common options are brushes, rollers, spray guns. Some of them require experience, but significantly speed up and simplify the process. Let's consider each option in more detail.
- Brush. Main tool. The main advantage is the uniform and thorough application of paint. The main disadvantage is the small area of influence. It is almost impossible to paint an entire building with a single brush. It is recommended to buy several at once. Before purchasing, make sure that the pile does not fall out of the selected option. The brush does not require special skills to use, which makes it the best tool for self-painting.
- Roller. Allows large surfaces to be machined short term. If you have not used anything like this before, first practice on some vertical flat surface. Inaccurate use of the roller can lead to the appearance of ugly stripes with different saturation, which will make it necessary to completely repaint the wall. Hard to reach places in any case, it will have to be processed with a brush.
- Airbrush. Most modern version. It is easier to use than a roller, but it is recommended to practice before starting work. The main thing is to always hold the tool at the same angle, at a certain distance from the surface to be treated, otherwise the paint will be darker somewhere, and lighter somewhere. There are a large number of different spray guns suitable for use in everyday life and professional work. Before choosing, be sure to read the instructions.
Remember that your comfort in the process depends on the choice of tool for coloring. Take your time. It is better to explore as many options as possible than to completely repaint the facade.
The façade is business card any building, allowing to form the right impression about its owner, whether it be a private person or an organization. Its decoration is made different ways and building materials and to the question of whether it is possible to paint the facade, with confidence, we can say yes.
Facade painting is one of the most economical ways finishing, which performs two main functions, it is aesthetics and prevention of destruction of walls under the influence external factors. With proper staining, the facade will last long time no visible damage or loss appearance.
The need to paint the facade
Painting the walls and facade of the building is necessary for several reasons:
- for aesthetic reasons - the facade of the house should be its decoration, looking at which it harmonizes good impression, and if it concerns an organization, then it should reflect the stability and confidence in this company;
- to prevent damage to the building surface caused by external factors such as rain, wind, frost. Unfinished walls absorb moisture well, which will eventually lead to their destruction;
- to protect the walls of the house from the appearance of mold and fungus, which are a real problem, as they spoil the appearance and quickly spread over the entire surface.
Signs that it is necessary to paint the facade of houses, the photos of which are presented below:
- if the walls are unfinished for one reason or another, for example, at the end of the construction of a new house;
- loss of appearance of the finishing material, its tarnishing or fading;
- if the old paint or any other finishing material fell into disrepair;
- appearance of the first signs of mold.
Having found at least one of the above signs, you must immediately start painting the facade surface. Photos of painting the facades of houses are presented below.
Types and characteristics of paints
As a binder in paint and varnish compositions, resins are used, the basis of which is acrylic, vinyl, silicone or silicates. There are also paints based on cement or lime, but they are used very rarely, due to low efficiency.
Vinyl
Vinyl paint has low performance characteristics, because of which you need to pay attention to its compatibility with the paint base. This coating has a large number of disadvantages, these include:
- low vapor permeability;
- ability to absorb moisture;
- instability to chemical attack and the appearance of fungus or mold;
- low wear resistance.
Of the advantages of the material, one can note the affordable price for it.
Acrylic
Acrylic paint, which is mainly used for painting the facade of the house, has a base connecting element, it is a resin of organic origin. Water or other substances are used as a solvent.
The main advantage of acrylic paints is rich, durable colors with low water permeability and excellent resistance to sunlight. Thanks to this, the painted facade of the house will delight with its beauty for more than one year.
Latex compositions belong to a variety of acrylic paints. Artificial rubber based on acrylic resin is added to their composition. This composition has good wear resistance, elasticity, tightness.
Silicone
This group includes compounds based on silicon, silane, siloxane. The benefits of this coverage include:
- good moisture resistance, protecting the facade from getting wet and thereby extending the life of wall building materials;
- fairly good vapor permeability;
- resistance to temperature extremes;
- has good adhesion to the base of the facade.
The disadvantages include low wear resistance. By combining the two bases, an acrylic-silicone paint is obtained, which has a high vapor permeability, thanks to which the walls "breathe". The disadvantages include a good moisture-absorbing ability, leading the walls to get wet and dirty.
silicate
Silicate paint has a lot of advantages:
- moisture resistance;
- good vapor permeability;
- mold and fungus do not spread on the surface;
- It has good properties clutch.
The disadvantages of silicate dyes include:
- in case of replacement of the coating, the previous one is difficult to remove;
- burns out when exposed to sunlight;
- small selection color palette.
Other types
In addition to the main ones, there are some other types of paints that are used infrequently:
- polysilicon - their group includes compounds based on polysilicate. The main advantage of this group of paints is the possibility of applying it to a recently plastered facade or to a painted surface. The coating repels moisture and passes steam;
- cement dyes are of mineral origin. Very similar to the lime group of paints, only more resistant to various external factors. This paint is rare, so it is used infrequently;
- lime - the preparation of this group of paints is based on slaked lime. Their advantages include the fact that they pass air well, have an antiseptic effect, preventing the appearance of fungus or mold. As for the disadvantages, among them is that they have a high degree of moisture absorption, there is a rapid contamination of the surface, a small selection of colors, mostly pastel colors.
lime 
Silicon Paint selection rules
In order for the coating to justify all the hopes placed on it, you need to responsibly approach the choice of paint, the huge variety of which can mislead not only ordinary people but also specialists. Therefore, when choosing it, you should pay attention to such characteristics:
- increased resilience to change external environment. It can be temperature changes, snow, rain;
- resistance to sun radiation, under the influence of which the paint not only burns out, but also swells or cracks, which will later lead to its peeling;
- environmental friendliness of the material - when exposed to external factors and the paint is heated in the sun, it should not emit harmful fumes;
- moisture-repellent and vapor permeable properties. With good vapor permeability, there is no accumulation of condensate, which adversely affects wall materials. Water permeability should be as low as possible, since when the surface becomes damp, mold, fungus, cracks appear;
- have an appropriate chemical composition, which, when interacting with the main building materials will not react. It is also necessary to take into account the composition of the previous layer, the choice must be made with its similar composition;
- elasticity of the paint after it dries.
The main criteria for choosing a coloring composition are excellent protective functions, long service life and a pleasant appearance.
All of the above coloring compositions have their own structure and different chemical composition. When choosing the most suitable composition, you also need to take into account such nuances:
- concrete wall painting brickwork better performed by the mineral composition;
- silicone paint will help strengthen the old facade;
- facade can be painted acrylic paint, as it is suitable for most surfaces and is the best option among a wide variety of colors;
- resin-based paint is most suitable for wood and metal structures.
Facade preparation
Painting the facade of the house begins with the preparation of the work surface. For this, the following work is carried out:
- remove old, peeling paint. Check the walls for the integrity of the plaster. By tapping the walls with a wooden mallet, all places with internal cracks and fungus will immediately show up. Sometimes, during such a procedure, large areas fall off that need to be re-plastered or sealed with a solution of clay or cement;
Removing old paint from the facade - if there is fungus, mold or other contaminants on the surface, such areas must be well cleaned and treated with antifungal agents. Cleaning is done wire brush or a small spatula. In case of minor contamination, it is enough to wash them off with water;
- removal of rust spots - if they are left, they may later appear on the painted surface;
- if the facade of the house was originally whitewashed, you need to treat it with an acrylic primer;
Surface primer - upon completion of construction or repair work you need to level the surface of the facade, for this it needs to be plastered with a special solution. When choosing a solution, you need to consider what kind of paint will be painted. So, when using water-dispersion paints, the putty must be water-based;
- After finishing plastering the walls, let them dry well. The time spent on this depends on the layer of plaster, but not less than one week;
- after drying, clean the surface;
- in case of wooden houses, the surface must be sanded;
- impregnate with an antifungal compound;
- cover the surface with a primer, which not only helps to evenly apply paint, but also increases the wear resistance of paints and varnishes;
- in order to paint wooden facade, the primer must be applied several times, as the wood absorbs the solution well. The next coat of primer should be applied after the previous one has dried.
Roller painting If even minor flaws are found on the surface of the walls, they must be eliminated, since after painting they will be very noticeable. How to paint the plastered facade of the house shows a photo.
Methods for applying facade paints What makes painting difficult?
In order to paint the facade of a private house or other building and get the desired result, it is necessary to comply with technological standards and consistently complete the painting stages. There are some factors that complicate the work:
- season, weather. Yes, in winter period, or during rain, the result will not be what was expected;
- lack of storm water. Facades of houses to be painted must be equipped with storm drain, since water has destructive properties that will reduce the life of any coloring matter;
- poorly prepared surface. Many craftsmen miss the point that, depending on the regions where the house is located, ground water and rains can have different levels of acidity, which accelerates the destruction of the facade surface. To prevent this, you need to choose the most suitable paint and primer.
The better the preparation of the facade surface, the better the final result will be.
If you do not adhere to the staining technology, then after a while the paint may peel off Features of work on painting the facade
Every kind construction works has its own characteristics and painting the facade is no exception. Taking them into account, and following some recommendations of experts, it will not be difficult to paint the facade and will be done in the best quality:
- carrying out external painting works, it is better to produce in dry, calm weather, with positive air temperature;
- the surface should not be very hot sunbeams, for this it is recommended to work in the morning;
- do not paint a wet surface (in the period after the rain), you need to let it dry completely;
- before coloring wooden surface facade, you need to properly treat it with an antiseptic. It must be applied along the wood fibers, from edge to edge;
- in the process of painting work, the coloring composition must be constantly mixed to obtain a uniform consistency throughout the entire period of staining;
- when painting the facade of private wooden houses, you must not forget about its ends, which in the process also need to be treated with a primer layer;
- the final color will be known only after the walls have completely dried, so that the result is not a surprise, you need to conduct trial staining and choose the most suitable option. In the case of mixing paints, this procedure should be performed once, in order to avoid the appearance of different shades in the course of painting works;
- the choice of a good brush or roller also affects the quality of the painting.
When choosing a paint color, it is important to remember that it may look a little darker on the facade. Summing up, it becomes clear that painting the facade is a serious undertaking and requires a responsible approach. Basically, the quality of the final result is affected by a properly prepared surface and the choice suitable paint, which are very diverse. The main criteria for its selection are their resistance to moisture, good vapor permeability and wear resistance. At right choice materials and following the recommendations of experts, the end result will be at the highest level.
Video
The video demonstrates how to properly paint the facade.
Photo of painted facades
We offer you to see photos of houses whose facades are painted with various kinds paints.
Finishing the facade by painting, from a financial point of view, is always more profitable than the same type of finish used for interior decoration. The thing is that in addition to the outer walls, the house also has partitions, which doubles the area of the painted surface. Therefore, even if the price of facade paint turns out to be slightly higher, it still costs exterior finish less money will be spent.
However, before you paint the house outside, you need to choose the right paint and prepare the surface, because the quality of the finish as a whole ultimately depends on these two nuances. In this article we will talk about the types and compatibility of facade coatings, their protective and decorative properties. We hope that our instruction will become the best assistant for those who can't make up their mind.
What should be the paint for the facade
By by and large, standards impose requirements not so much on the paints themselves, but on the decorative films they form.
What is the most important thing for them? The main indicator of a good facade paint is the ability of the coating to maintain its integrity and original color for a long time under atmospheric conditions.
Basic indicators
For facade paints, indicators such as vapor permeability and moisture resistance are very important, and in fact, it is rather problematic to achieve them from one material. And without this combination, the coating will not turn out to be resistant, since moisture attacks it not only from the outside, but also comes out in the form of steam from the wall.
Note! When the steam has nowhere to go, it condenses and wets the inside of the paint film. In winter, this moisture freezes, and when thawed, it expands and peels off the paint. Keep in mind: the higher the vapor permeability of the structural material of the walls and their interior decoration, the higher this indicator should be for facade paint.
So:
- Paints with good vapor permeability are called "breathable", and they achieve an improvement in this characteristic by introducing pore-forming additives into the paintwork materials. But in order for the coating to be UV-resistant, manufacturers have to use light-resistant film formers and pigments.
- Peeling of paint from the base occurs not only due to its poor vapor permeability. The quality of the coating is largely determined by the properties of the primer, which must also be properly selected. Here the main rule is that the primer composition should be made on the basis of the same components as the paint.
To a question like: “How to paint log house outside?”, you can safely answer that the best option It is a self-priming paint that is both primer and paint at the same time.
Simply, when applying the first layer, it is diluted with a solvent to more liquid state and prime the surface. The second layer is applied as usual.
Choice of colors
When choosing a paint for the facade, it is also necessary to take into account such indicators as hiding power and consumption per 1m2. In fact, these are two related concepts - than better paint covers the base, the fewer layers will have to be applied, and accordingly, its consumption will be lower.
It seems that homeowners are no longer satisfied with easy and neutral color facade in combination with a darker shade of the roof. In 2019, the demand for more unusual and bold house colors in the private sector is clearly visible. However, the desire to stand out from the background of others does not always lead to the desired "Wow" effect. In this article, we have collected 35 photos good examples painting houses and combining colors of the facade and roof with useful tips for those who are planning to update the look of their home from the outside this year. Enjoy reading!
Here are a few general advice on the choice of color for the facade of the house, before moving on to an overview of popular shades and color combinations for the facade and roof:
- If you want to paint your house unusual color that you love, but don’t know what to combine it with, then just choose a shade that will be a couple of tones lighter or darker than the main one on color wheel. And to make such a simple solution unforgettable, paint front door in some bright and contrasting color, as in next photo.
Also read:
2. The facade of your house has natural materials that do not need painting? Then know that if they have a cold texture (concrete, slate, etc.), then it is better to combine them with bright colors facades and vice versa. So, today concrete is combined with orange walls houses outside, warm tree and stone, with elegant gray facades.
3. The monochromatic color of the facade can become much more interesting if you emphasize its individual details with white or another suitable color. Thin gables, window frames and other small elements can be a very expressive decoration of your home from the outside.
4. Contrasting (with respect to the walls of the facade) shades are ideal for painting the basement, canopy over the porch, bay windows and other protruding parts of the facade. Just make sure they have interesting enough shapes to emphasize.
5. Surprisingly, but bright and bold colors are best suited for unremarkable or even repulsive facades. divert our attention from low quality details and design. At the same time, if your house has beautiful bas-reliefs or other attractive elements, then the color of the facade should be gentle or neutral.
6. If your house is made of stone, wood or other unpainted material and you are looking for a color to paint the roof and other exterior elements, then try to find it in the facade material itself. It may be brown-green spots on the stone, or dark shade knots in wood. Nature - the best master for creating stylish color combinations.
7. After you have roughly decided on the color of the facade, try painting a fairly large piece of drywall, plywood or drawing paper into it. Attach this pattern to the outside of your home and step back to see how it looks. Any tone can look chic in someone else's photo, but in reality it doesn't harmonize with environment your house. An extra check never hurts! According to its results, it may well turn out that you need to dilute the paint a tone lighter or darker.
The combination of colors for the facades of the house and the roof - 35 photos
If you do not have a specific favorite shade and you need ideas on what color to choose for the facade, then we provide an overview of several of the most popular shades for the facade of a private house in 2019 especially for you.
The most fashionable facade color is sage
This soft light green hue looks great against any background and pairs well with both brights and dark tones. In the next photo of the facades, you see examples of its combination with red-orange and dark blue "navy". Both houses are made in the same style, have two floors, siding and the same shape of windows, but the details of different shades against the general background make them look completely different! Which combination do you like best?
Elegant gray house facades
No matter how versatile the shade of sage is, it cannot be compared with gray. By the way, gray tones are in demand today and in interior decoration private houses. Below we provide a few photos where gray is used as the main color of the facade.
Exquisite red façade
Deep ruby red hues, as well as last year's, are loved by facade designers not only for their luxurious look, but also for their ability to blend with the green plants that surround most private homes. The fact is that red and green are opposite on the color wheel, and therefore provide the greatest contrast in relation to each other. If your home has an interesting shape worth highlighting, paint it in a color that will complement the surrounding landscape.
The combination of gray and brown colors for the facade of the house
Gray and brown are versatile earthy hues that are guaranteed to look good against any background. The combination of these colors suits the facade of the house and the roof no less successfully than the fashionable gray-brown color, which is also called "taupe" (taupe). The photos below prove it.
Other beautiful colors of house facades (photo)
Finally, we present a few more successful combinations house facade and roof colors, including blue, yellow, black houses, etc. We will be grateful for any comments and opinions on this article!
Also read:
Applying paint to the facade is the easiest, fastest and most affordable method of ennobling it. This is important because the facade is the face of the house and, in fact, indicates the well-being of the owners. If it seems to you that you cannot do this work on your own, then you are mistaken. In fact, painting is quite possible.
Paint will not only improve the external characteristics of the house, but also protect it from the aggressive effects of the external environment.
Outdoor work must be completed before the first frosts. This is important because this way you can save the plaster and prevent the paint from freezing. True, you can not paint the walls on days of high solar activity, because the paint will dry unevenly. A cool cloudy day with no precipitation is best time to carry out such work.
Making a paint calculation
In order for you to be able to calculate the amount of paint that you will need to update the exterior walls of the house, you will first need to determine exact area their surfaces. As for the paint itself, you can find out how much area can be painted with 1 liter of composition from the package or can. When calculating the amount of paint, you should take into account the fact that you will have to cover the surface twice. And this means that the resulting figure should be multiplied by 2.
Experts with sufficient experience in painting facades recommend buying paint with a 10% margin. The fact is that the consumption of the coloring composition may increase for any reason, for example, due to the high absorbent properties of the surface.
Preliminary preparation of the facade for painting
The paint does not mask surface defects. If you notice cracks or chips in outer walls at home, then you will need to cover them with a specially prepared solution, for example, based on cement.
If you do not carry out a preliminary coating of cracks and chips, then after painting they will become even more noticeable, which is why finished facade will not be presentable. The work will have to be redone, having spent a lot of effort, money and time.
Before painting, it is important to clean the surface of dust and dirt, then cover up all the bumps, cracks and chips, and then leave the walls until they dry completely. If necessary, plaster the walls in order to achieve their maximum alignment.
For optimal adhesion of the surface, a primer or mixtures must be used. deep penetration. If the facade of your house is made of silicate brick or wood, then the surface will have to be primed several times. This is due to the fact that these materials strongly absorb the primer solution. Apply the next layer after the previous one has completely dried.
Features of painting the facade
So what is the right way to paint? If the area is very large, then you can use an airbrush, paint trough, hand roller, masking tape and brushes to speed up the painting process. It is very convenient to paint the facade of the house with an electric spray gun. In this case, the paint lays down in a thin layer without streaks and streaks.
If in the process of painting the facade you decide to use an electric spray gun or roller, then carefully choose the paint. After all, the device can only be filled with paint that has a suitable viscosity level. These data, as a rule, are indicated on the bank or packaging by the manufacturer.
If you don’t have a facade painting machine at your disposal, then you can do this work with an ordinary hand roller. Make sure that you have different nozzles in advance. This will allow you to easily paint different parts of the walls. Also in your building assortment should be a portable wide ladder and scaffolding.
Apply the coloring composition with a roller at such angles: horizontally, vertically and obliquely. Thus, the paint will lie on the walls evenly.
After you wet the roller with paint, you will have to remove excess paint from it. To do this, roll the roller on the corrugated surface of the tray.
To get an even finish, apply the paint with an overlap of 2-3 cm. In most cases, facade paints must be applied in 2 layers. The only exception is lime paint, which is always applied in 3 layers. As with a primer, each coat should be applied after the previous one has completely dried.
- Wall painting should start from the most visible areas, namely from the corners.
- To qualitatively paint over hard-to-reach areas of the wall, you should use a brush of the appropriate size.
- If you paint the walls with a roller, then the plinth must be covered protective film. This is because the paint may drip off the tool.
- If you want to create unique design, then it is better to paint windows and doors in a contrasting color to the walls.
- Before you paint the walls, protect windows and doors from getting paint on them. Masking tape and film will help you with this.
Now you know how and with what to paint houses, so feel free to take on this exciting task. You can save family budget and realize your creative potential.
If this article was useful to you or you have any questions on the topic, then write comments on it. The specialists of our site will kindly provide you with professional advice, exhaustively answering all questions.
Video
How to paint a plastered facade, see this video:
Photo
